← Back to Search
Modification Of Extended Open Frameworks With Fluorescent Tags For Sensing Explosives: Competition Between Size Selectivity And Electron Deficiency.
Bappaditya Gole, A. K. Bar, P. S. Mukherjee
Published 2014 · Chemistry, Medicine
Save to my Library
Download PDFAnalyze on Scholarcy
Three new electron-rich metal-organic frameworks (MOF-1-MOF-3) have been synthesized by employing ligands bearing aromatic tags. The key role of the chosen aromatic tags is to enhance the π-electron density of the luminescent MOFs. Single-crystal X-ray structures have revealed that these MOFs form three-dimensional porous networks with the aromatic tags projecting inwardly into the pores. These highly luminescent electron-rich MOFs have been successfully utilized for the detection of explosive nitroaromatic compounds (NACs) on the basis of fluorescence quenching. Although all of the prepared MOFs can serve as sensors for NACs, MOF-1 and MOF-2 exhibit superior sensitivity towards 4-nitrotoluene (4-NT) and 2,4-dinitrotoluene (DNT) compared to 2,4,6-trinitrotoluene (TNT) and 1,3,5-trinitrobenzene (TNB). MOF-3, on the other hand, shows an order of sensitivity in accordance with the electron deficiencies of the substrates. To understand such anomalous behavior, we have thoroughly analyzed both the steady-state and time-resolved fluorescence quenching associated with these interactions. Determination of static Stern-Volmer constants (KS) as well as collisional constants (KC) has revealed that MOF-1 and MOF-2 have higher KS values with 4-NT than with TNT, whereas for MOF-3 the reverse order is observed. This apparently anomalous phenomenon was well corroborated by theoretical calculations. Moreover, recyclability and sensitivity studies have revealed that these MOFs can be reused several times and that their sensitivities towards TNT solution are at the parts per billion (ppb) level.
This paper references
Self-assembly of metallamacrocycles using a dinuclear organometallic acceptor: synthesis, characterization, and sensing study.
S. Shanmugaraju (2011)
Engineering homochiral metal-organic frameworks for heterogeneous asymmetric catalysis and enantioselective separation.
Y. Liu (2010)
Low-mass ions observed in plasma desorption mass spectrometry of high explosives
Synthesis of metal-organic frameworks (MOFs): routes to various MOF topologies, morphologies, and composites.
N. Stock (2012)
Highly-selective and reversible O2 binding in Cr3(1,3,5-benzenetricarboxylate)2.
Leslie J Murray (2010)
A sense for landmines
A. W. Czarnik (1998)
Chemosensing of 1,4-dinitrobenzene using bisfluorene dendrimer distributed feedback lasers
S. Richardson (2009)
Highly controlled acetylene accommodation in a metal–organic microporous material
R. Matsuda (2005)
An electron rich porous extended framework as a heterogeneous catalyst for Diels-Alder reactions.
Bappaditya Gole (2013)
Toxicity of sediment-associated nitroaromatic and cyclonitramine compounds to benthic invertebrates.
G. Lotufo (2001)
Solvatochromic behavior of a nanotubular metal-organic framework for sensing small molecules.
Z. Lu (2011)
Metal-organic frameworks: opportunities for catalysis.
D. Farrusseng (2009)
Direct crystallographic observation of catalytic reactions inside the pores of a flexible coordination polymer.
R. K. Das (2012)
Manganese-based nanoscale metal-organic frameworks for magnetic resonance imaging.
Kathryn M. L. Taylor (2008)
Fluorescent detection of nitroaromatics and 2,3-dimethyl 2,3-dinitrobutane (DMNB) by a zinc complex: (salophen)Zn.
M. E. Germain (2007)
Multivariate analysis of statistically poor EDXRD spectra for the detection of concealed explosives
R. D. Luggar (1998)
A pattern recognition based fluorescence quenching assay for the detection and identification of nitrated explosive analytes.
Andrew D. Hughes (2008)
The Synthesis of Parathion and Some Closely Related Compounds
J. H. Fletcher (1950)
Detection of trace amounts of explosives and/or explosive related compounds on various surfaces by a new sensing technique/material
L. M. Dorozhkin (2004)
Homochiral metal-organic frameworks for asymmetric heterogeneous catalysis.
M. Yoon (2012)
The design of functionalized silicone polymers for chemical sensor detection of nitroaromatic compounds
R. McGill (2000)
Metall‐organische Gerüste für die Katalyse
D. Farrusseng (2009)
A catalytically active, permanently microporous MOF with metalloporphyrin struts.
Abraham M. Shultz (2009)
Multiphoton Fluorescence Quenching of Conjugated Polymers for TNT Detection
A. Narayanan (2008)
Pulsed spectrometer for nuclear quadrupole resonance for remote detection of nitrogen in explosives
V. Anferov (2000)
Fluorescent nanoscale zinc(II)-carboxylate coordination polymers for explosive sensing.
C. Zhang (2011)
Optical explosives detection: from color changes to fluorescence turn-on.
M. E. Germain (2009)
Instrumentation for trace detection of high explosives
D. Moore (2004)
Luminescence-based methods for sensing and detection of explosives
Melissa S Meaney (2008)
From molecules to solids with the DMol3 approach
B. Delley (2000)
Luminescent functional metal-organic frameworks.
Yuanjing Cui (2012)
Electron rich supramolecular polymers as fluorescent sensors for nitroaromatics
S. Shanmugaraju (2013)
WinGX suite for small-molecule single-crystal crystallography
L. Farrugia (1999)
Two novel MOF-74 analogs exhibiting unique luminescent selectivity.
Gui-lei Liu (2013)
A dynamic, luminescent and entangled MOF as a qualitative sensor for volatile organic solvents and a quantitative monitor for acetonitrile vapour
J. Wang (2013)
Zinc-adeninate metal-organic framework for aqueous encapsulation and sensitization of near-infrared and visible emitting lanthanide cations.
Jihyun An (2011)
Nanoscale metal-organic frameworks for biomedical imaging and drug delivery.
Joseph Della Rocca (2011)
Selective gas adsorption in a magnesium-based metal-organic framework.
Young Eun Cheon (2009)
Carbon dioxide capture in metal-organic frameworks.
K. Sumida (2012)
Deconstructing the crystal structures of metal-organic frameworks and related materials into their underlying nets.
M. O'Keeffe (2012)
Fluorescent metal-organic framework for selective sensing of nitroaromatic explosives.
Bappaditya Gole (2011)
Highly selective detection of nitro explosives by a luminescent metal-organic framework.
S. Nagarkar (2013)
Investigations of energy migration in an organic dendrimer macromolecule for sensory signal amplification.
M. Guo (2009)
Progress on determining the vapor signature of a buried land mine
V. George (1999)
Reticular synthesis and the design of new materials
O. Yaghi (2003)
Conjugated polymer-based chemical sensors.
D. Mcquade (2000)
Expansion of the Porous Solid Na2Zn3[Fe(CN)6]2·9H2O: Enhanced Ion-Exchange Capacity in Na2Zn3[Re6Se8(CN)6]2·24H2O
M. Bennett (2000)
Solid-state dendrimer sensors: probing the diffusion of an explosive analogue using neutron reflectometry.
H. Cavaye (2009)
Polymer sensors for nitroaromatic explosives detection
S. J. Toal (2006)
Self-Assembly of a Nanoscopic Prism via a New Organometallic Pt3 Acceptor and Its Fluorescent Detection of Nitroaromatics
S. Ghosh (2008)
A rod packing microporous metal-organic framework with open metal sites for selective guest sorption and sensing of nitrobenzene.
Z. Zhang (2010)
Supramolecular polymer for explosives sensing: role of H-bonding in enhancement of sensitivity in the solid state.
Bappaditya Gole (2011)
Kinetic separation of propene and propane in metal-organic frameworks: controlling diffusion rates in plate-shaped crystals via tuning of pore apertures and crystallite aspect ratios.
C. Lee (2011)
Systematic Design of Pore Size and Functionality in Isoreticular MOFs and Their Application in Methane Storage
M. Eddaoudi (2002)
Cation-triggered drug release from a porous zinc-adeninate metal-organic framework.
Jihyun An (2009)
Functional porous coordination polymers.
S. Kitagawa (2004)
Sensing nitroaromatic analytes with a bifluorene-cored dendrimer
H. Cavaye (2009)
Chemical sensors based on amplifying fluorescent conjugated polymers.
Samuel W Thomas (2007)
Effect of Dimensionality in Dendrimeric and Polymeric Fluorescent Materials for Detecting Explosives
H. Cavaye (2010)
Detection of nitroaromatic explosives based on photoluminescent polymers containing metalloles.
H. Sohn (2003)
Chemical Detection with a Single-Walled Carbon Nanotube Capacitor
E. Snow (2005)
Exceptional framework flexibility and sorption behavior of a multifunctional porous cuprous triazolate framework.
Jie-Peng Zhang (2008)
Funktionale poröse Koordinationspolymere
S. Kitagawa (2004)
Self-assembly of an octanuclear platinum(II) tetragonal prism from a new Pt(II)4 organometallic star-shaped acceptor and its nitroaromatic sensing study.
S. Shanmugaraju (2012)
Metal-organic frameworks for separations.
J. Li (2012)
Screening of metal-organic frameworks for carbon dioxide capture from flue gas using a combined experimental and modeling approach.
A. O. Yazaydin (2009)
Single Step Synthesis of Peripherally “Clickable” Hyperbranched Polyethers
Animesh Saha (2009)
Detection of TNT and Picric Acid on Surfaces and in Seawater by Using Photoluminescent Polysiloles.
H. Sohn (2001)
A fluorescence turn-on mechanism to detect high explosives RDX and PETN.
T. Andrew (2007)
Highly selective CO(2) capture in flexible 3D coordination polymer networks.
Hye-Sun Choi (2009)
High and selective CO2 uptake in a cobalt adeninate metal-organic framework exhibiting pyrimidine- and amino-decorated pores.
Jihyun An (2010)
New microporous metal-organic framework demonstrating unique selectivity for detection of high explosives and aromatic compounds.
Sanhita Pramanik (2011)
Engineering metal organic frameworks for heterogeneous catalysis.
A. Corma (2010)
Chemical control of spin propagation between heterometallic rings.
T. Faust (2011)
Porous metal-organic-framework nanoscale carriers as a potential platform for drug delivery and imaging.
P. Horcajada (2010)
On-site detection of TNT with a portable fiber optic biosensor
L. Shriver-Lake (1997)
A hybrid electrochemical-colorimetric sensing platform for detection of explosives.
E. Forzani (2009)
Selective gas adsorption and separation in metal-organic frameworks.
J. Li (2009)
Enantioselective catalysis with homochiral metal-organic frameworks.
L. Ma (2009)
Surface-enhanced raman detection of 2,4-dinitrotoluene impurity vapor as a marker to locate landmines.
J. M. Sylvia (2000)
Metal-organic frameworks as efficient materials for drug delivery.
P. Horcajada (2006)
A reusable optical sensing layer for picric acid based on the luminescence quenching of the Eu-thenoyltrifluoroacetone complex
Jianzhong Lu (1996)
Attogram sensing of trinitrotoluene with a self-assembled molecular gelator.
K. Kartha (2012)
Metal-organic framework materials as chemical sensors.
Lauren E. Kreno (2012)
Self-assembly of neutral and cationic PdII organometallic molecular rectangles: synthesis, characterization and nitroaromatic sensing.
A. K. Bar (2011)
Fluorescent Porous Polymer Films as TNT Chemosensors: Electronic and Structural Effects
Jye-Shane Yang and (1998)
Explosive sensing with fluorescent dendrimers: the role of collisional quenching
David A. Olley (2011)
Investigation of common fluorophores for the detection of nitrated explosives by fluorescence quenching.
Melissa S Meaney (2008)
Recent Advances in Ion Mobility Spectrometry for Explosives Vapor Detection
G. E. Spangler (1985)
Molecular decoding using luminescence from an entangled porous framework
Y. Takashima (2011)
A luminescent microporous metal-organic framework for the fast and reversible detection of high explosives.
A. Lan (2009)
Metal-organic frameworks with functional pores for recognition of small molecules.
B. Chen (2010)
Discrimination of nitroaromatics and explosives mimics by a fluorescent Zn(salicylaldimine) sensor array.
M. Germain (2008)
Quenching mechanism of Zn(salicylaldimine) by nitroaromatics.
M. Germain (2008)
An all‐electron numerical method for solving the local density functional for polyatomic molecules
B. Delley (1990)
A chemically functionalizable nanoporous material (Cu3(TMA)2(H2O)3)n
S. Chui (1999)
Tunable emission from a porous metal-organic framework by employing an excited-state intramolecular proton transfer responsive ligand.
K. Jayaramulu (2010)
Bartoli Indole Synthesis
R. Dalpozzo (2005)
Efficient quenching of photoluminescence from functionalized single-walled carbon nanotubes by nitroaromatic molecules.
M. E. Kose (2006)
This paper is referenced by
Multiple Emitting Amphiphilic Conjugated Polythiophenes‐Coated CdTe QDs for Picogram Detection of Trinitrophenol Explosive and Application Using Chitosan Film and Paper‐Based Sensor Coupled with Smartphone
S. M. Tawfik (2019)
Two metal-organic frameworks based on a flexible dithioether spacer with luminescence and sensing properties
Q. Wang (2017)
Highly fluorescent selectivity of two Cd(II) coordination networks with active sites for nitroaromatic compounds and Fe3+ and Hg2+
Guohua Ren (2018)
Gas adsorption, magnetic, and fluorescent sensing properties of four coordination polymers based on 1,3,5-tris(4-carbonylphenyloxy)benzene and bis(imidazole) linkers
Jie Zhang (2018)
Nanoporous Cu(I) Metal–Organic Framework: Selective Adsorption of Benzene and Luminescence Sensing of Nitroaromatics
A. Santra (2017)
Metal–organic frameworks based luminescent materials for nitroaromatics sensing
Liangliang Zhang (2016)
A new antiferromagnetic Dy6 oxido-material as a multifunctional aqueous phase sensor for picric acid as well as Fe3+ ions
M. Raizada (2020)
Synthesis, structure and magnetic studies of lanthanide metal–organic frameworks (Ln–MOFs): Aqueous phase highly selective sensors for picric acid as well as the arsenic ion
M. Raizada (2018)
Rational synthesis, crystal structure, and sensing and adsorption properties of luminescent metal–organic frameworks
Chuanbin Fan (2019)
How explosive TNP interacts with a small tritopic receptor: a combined crystallographic and thermodynamic approach
P. Ghosh (2017)
Towards white-light emission by Tb3+/Eu3+ substitution in a Ca2+ framework
Antigoni Margariti (2018)
Discriminative detection of nitro aromatic explosives by a luminescent metal–organic framework
K. S. Asha (2014)
A 2D bilayered metal-organic framework as a fluorescent sensor for highly selective sensing of nitro explosives.
Xiaoli Hu (2015)
Luminescent microporous metal–organic framework with functional Lewis basic sites on the pore surface: Quantifiable evaluation of luminescent sensing mechanisms towards Fe 3+
Jun-Cheng Jin (2016)
Two luminescent Zn(II) metal-organic frameworks for exceptionally selective detection of picric acid explosives.
Zhi-Qiang Shi (2015)
High Loading of Pd Nanoparticles by Interior Functionalization of MOFs for Heterogeneous Catalysis.
Bappaditya Gole (2016)
A Series of d10 Metal Clusters Constructed by 2,6-Bis[3-(pyrazin-2-yl)-1,2,4-triazolyl]pyridine: Crystal Structures and Unusual Luminescences
J. Pan (2014)
Metal-organic fireworks: MOFs as integrated structural scaffolds for pyrotechnic materials.
L. Blair (2015)
Rapid Detection of the Biomarkers for Carcinoid Tumors by a Water Stable Luminescent Lanthanide Metal–Organic Framework Sensor
Shuangyan Wu (2018)
A tubular luminescent framework: precise decoding of nitroaniline isomers and quantitative detection of traces of benzaldehyde in benzyl alcohol
D. Wu (2020)
Two cadmium coordination polymers based on tris(p-carboxyphenyl) phosphane oxide with highly selective sensing of nitrobenzene derivatives and Hg2+ cations
Liangqin Huo (2017)
Two luminescent metal–organic frameworks with multifunctional properties for nitroaromatic compounds sensing and photocatalysis
Fengqin Wang (2015)
A Cu(I)–I coordination polymer fluorescent chemosensor with amino-rich sites for nitro aromatic compound (NAC) detection in water
Y. Zhang (2020)
Synthesis, structure and fluorescent sensing for nitrobenzene of a Zn-based MOF
Yong-Le Gan (2021)
Structural characterization of three semi-rigid tetracarboxylate-containing transition-metal coordination polymers
Jing-jing Huang (2016)
Postsynthetic exterior decoration of an organic cage by copper(I)-catalysed A3-coupling and detection of nitroaromatics.
Koushik Acharyya (2015)
Three new solvent-directed Cd(II)-based MOFs with unique luminescent properties and highly selective sensors for Cu(2+) cations and nitrobenzene.
Y. Wu (2015)
“Not quenched” aggregates of a triphenylene derivative for the sensitive detection of trinitrotoluene in aqueous medium
Harshveer Arora (2016)
Significant centre metallic effects on the sensing properties of two isostructural lanthanide metal-organic frameworks
Min-Le Han (2017)
Luminescent Metal–Organic Frameworks with Anthracene Chromophores: Small-Molecule Sensing and Highly Selective Sensing for Nitro Explosives
X. Li (2016)
Highly sensitive and selective ratiometric fluorescent metal–organic framework sensor to nitroaniline in presence of nitroaromatic compounds and VOCs
Minoo Bagheri (2017)
Sonochemically synthesized microporous metal–organic framework representing unique selectivity for detection of Fe3+ ions
E. Moradi (2019)See more