Online citations, reference lists, and bibliographies.

Finite Element Analysis Of Balloon-expandable Coronary Stent Deployment: Influence Of Angioplasty Balloon Configuration.

David Moral Martín, Fergal Boyle
Published 2013 · Medicine
Cite This
Download PDF
Analyze on Scholarcy
Today, the majority of coronary stents are balloon-expandable and are deployed using a balloon-tipped catheter. To improve deliverability, the membrane of the angioplasty balloon is typically folded about the catheter in a pleated configuration. As such, the deployment of the angioplasty balloon is governed by the material properties of the balloon membrane, its folded configuration and its attachment to the catheter. Despite this observation, however, an optimum strategy for modelling the configuration of the angioplasty balloon in finite element studies of coronary stent deployment has not been identified, and idealised models of the angioplasty balloon are commonly employed in the literature. These idealised models often neglect complex geometrical features, such as the folded configuration of the balloon membrane and its attachment to the catheter, which may have a significant influence on the deployment of a stent. In this study, three increasingly sophisticated models of a typical semi-compliant angioplasty balloon were employed to determine the influence of angioplasty balloon configuration on the deployment of a stent. The results of this study indicate that angioplasty balloon configuration has a significant influence on both the transient behaviour of the stent and its impact on the mechanical environment of the coronary artery.
This paper references
Restenosis and the proportional neointimal response to coronary artery injury: results in a porcine model.
Robert S. Schwartz (1992)
update : A Report from the American Heart Association
D Fischman
Numerical simulation of drug eluting coronary stents: Mechanics, fluid dynamics and drug release
Paolo Zunino (2009)
The role of vessel geometry and material properties on the mechanics of stenting in the coronary and peripheral arteries
Michael Early (2010)
Influence of surface texture and charge on the biocompatibility of endovascular stents.
Christoph Hehrlein (1995)
Numerical investigation of the intravascular coronary stent flexibility.
Lorenza Petrini (2004)
Finite element analysis of the implantation of a balloon-expandable stent in a stenosed artery.
Dongke Liang (2005)
Stent tubing: Understanding the desired attributes. Medical Device Materials: Proceedings from the Materials & Processes for Medical Devices
P Poncin (2003)
Three-Dimensional Computational Fluid Dynamics Modeling of Alterations in Coronary Wall Shear Stress Produced by Stent Implantation
John F. LaDisa (2004)
Continuum damage model for bioresorbable magnesium alloy devices - Application to coronary stents.
Dario Gastaldi (2011)
Analysis of the transient expansion behavior and design optimization of coronary stents by finite element method.
Wei-Qiang Wang (2006)
Stent design properties and deployment ratio influence indexes of wall shear stress: a three-dimensional computational fluid dynamics investigation within a normal artery.
John F. LaDisa (2004)
Mechanical behaviour modelling of balloon-expandable stents.
Claude Dumoulin (2000)
In stent restenosis: bane of the stent era
Amit K Mitra (2006)
A full-range, multi-variable, CFD-based methodology to identify abnormal near-wall hemodynamics in a stented coronary artery.
Jonathan Murphy (2010)
Stent tubing : Understanding the desired attributes
P Poncin (2003)
Heart disease and stroke statistics--2011 update: a report from the American Heart Association.
V. L. Roger (2011)
Heart disease and stroke statistics
V Roger (2011)
A Novel Simulation Strategy for Stent Insertion and Deployment in Curved Coronary Bifurcations: Comparison of Three Drug-Eluting Stents
Peter Mortier (2009)
Analysis of Side Branch Access During Bifurcation Stenting
Peter Mortier (2008)
Finite element simulation of slotted tube (stent) with the presence of plaque and artery by balloon expansion
S. N. David Chua (2004)
A predictive study of the mechanical behaviour of coronary stents by computer modelling.
Francesco Migliavacca (2005)
Drug-eluting stents for coronary artery disease: a review.
David Mingot Martín (2011)
Pathology of in-stent restenosis.
Renu Virmani (1999)
Relationship between neointimal thickness and shear stress after Wallstent implantation in human coronary arteries.
J J Wentzel (2001)
Measurement and Numerical Simulation of the Dilatation Behaviour of Coronary Stents
Heinz Brauer (1999)
Drug release from coronary eluting stents: A multidomain approach.
Giuseppe Vairo (2010)
Finite-element Analysis of a Stenotic Artery Revascularization Through a Stent Insertion
Ferdinando Auricchio (2001)
A corrosion model for bioabsorbable metallic stents.
James A. Grogan (2011)
A randomized comparison of a sirolimus-eluting stent with a standard stent for coronary revascularization.
M Morice (2002)
Selection of coronary stents.
Antonio Colombo (2002)
Assessment of tissue prolapse after balloon-expandable stenting: influence of stent cell geometry.
Claudio Capelli (2009)
Mechanical behavior of coronary stents investigated through the finite element method.
Francesco Migliavacca (2002)
Analysis of the mechanical performance of a cardiovascular stent design based on micromechanical modelling
J P McGarry (2004)
Finite element analyses for design evaluation of biodegradable magnesium alloy stents in arterial vessels
Wei Wu (2011)
Handbook of Coronary Stents
Patrick W. Serruys (1997)
A constitutive formulation of vascular tissue mechanics including viscoelasticity and softening behaviour.
Estefanía Peña (2010)
Mechanical properties of coronary stents determined by using finite element analysis.
Frederique Etave (2001)
Analysis of wall shear stress in stented coronary artery using 3D computational fluid dynamics modeling
Vahab Dehlaghi (2008)
Finite-element simulation of stent expansion
S. N. David Chua (2002)
Sirolimus-eluting stents versus standard stents in patients with stenosis in a native coronary artery.
Jeffrey W. Moses (2003)
The influence of plaque composition on underlying arterial wall stress during stent expansion: the case for lesion-specific stents.
Ian Owens Pericevic (2009)
Determination of layer-specific mechanical properties of human coronary arteries with nonatherosclerotic intimal thickening and related constitutive modeling.
Gerhard A. Holzapfel (2005)
Multiobjective design optimisation of coronary stents.
Sanjay Pant (2011)
A method for investigating the mechanical properties of intracoronary stents using finite element numerical simulation.
Lip Bun Tan (2001)
Circumferential vascular deformation after stent implantation alters wall shear stress evaluated with time-dependent 3D computational fluid dynamics models.
John F. LaDisa (2005)
Pathology of acute and chronic coronary stenting in humans.
Andrew Farb (1999)
Evaluation of the effect of stent strut profile on shear stress distribution using statistical moments
Juan David Mejìa (2009)
Finite element simulation of stent and balloon interaction
S. N. David Chua (2003)
Effects of different stent designs on local hemodynamics in stented arteries.
Rossella Balossino (2008)
Static circumferential tangential modulus of human atherosclerotic tissue.
Howard Martin Loree (1994)
Cardiovascular stent design and vessel stresses: a finite element analysis.
Caitríona Lally (2005)
A comparison of balloon-expandable-stent implantation with balloon angioplasty in patients with coronary artery disease. Benestent Study Group.
P. W. Serruys (1994)
Experimental Studies and Numerical Analysis of the Inflation and Interaction of Vascular Balloon Catheter-Stent Systems
Dimitrios E. Kiousis (2008)
On the effects of different strategies in modelling balloon-expandable stenting by means of finite element method.
Francesca Gervaso (2008)
Computational structural modelling of coronary stent deployment: a review
David Mingot Martín (2011)
Simulation of a balloon expandable stent in a realistic coronary artery-Determination of the optimum modelling strategy.
Houman Zahedmanesh (2010)
parison of balloon - expandable - stent implantation with balloon angioplasty in patients with coronary artery disease
P Serruys (1994)
Computer Prediction of Friction in Balloon Angioplasty and Stent Implantation
Denis Laroche (2006)
Realistic finite element-based stent design: the impact of balloon folding.
Matthieu De Beule (2008)
A Numerical Methodology to Fully Elucidate the Altered Wall Shear Stress in a Stented Coronary Artery
Jonathan Murphy (2010)
A polymer-based, paclitaxel-eluting stent in patients with coronary artery disease
Gregg W Stone (2004)
A randomized comparison of coronary-stent placement and balloon angioplasty in the treatment of coronary artery disease. Stent Restenosis Study Investigators.
David L Fischman (1994)

This paper is referenced by
Inflation Mechanics of Hyperelastic Membranes
Amit Patil (2015)
Computational modelling of stent deployment and mechanical performance inside human atherosclerotic arteries
Alessandro Schiavone (2015)
Free and constrained inflation of a pre-stretched cylindrical membrane
Amit Patil (2014)
Validated Computational Model to Compute Re-apposition Pressures for Treating Type-B Aortic Dissections
Aashish Ahuja (2018)
A study of balloon type, system constraint and artery constitutive model used in finite element simulation of stent deployment
Alessandro Schiavone (2015)
Surrogate-based visualization and sensitivity analysis of coronary stent performance: A study on the influence of geometric design.
Nelson S Ribeiro (2018)
Three-Dimensional Strain Measurements of a Tubular Elastic Model Using Tomographic Particle Image Velocimetry
Azuma Takahashi (2018)
Stents for transcatheter aortic valve replacement
Kenneth Park (2017)
Effects of Metal Material Stent Design Parameters on Longitudinal Stent Strength
Xiang Shen (2016)
Mechanical analysis of a novel biodegradable zinc alloy stent based on a degradation model
Kun Peng (2019)
Computational analysis of Nitinol stent-graft for endovascular aortic repair (EVAR) of abdominal aortic aneurysm (AAA): Crimping, sealing and fluid-structure interaction (FSI).
Raja Jayendiran (2019)
A computational approach for the lifetime prediction of cardiovascular balloon-expandable stents
Ferdinando Auricchio (2015)
Computational fluid dynamics analysis of balloon-expandable coronary stents: influence of stent and vessel deformation.
David Mingot Martín (2014)
Pursing of planar elastic pockets
Yann Bouremel (2017)
Oct-based Modeling of Stent Deployment in Heavily Calcified Coronary Lesion.
Pengfei Dong (2019)
Comparative study of tapered versus conventional cylindrical balloon for stent implantation in stenotic tapered artery.
Xiang Shen (2020)
Computational Modeling and Comparative Tissue Damage Analysis of Angioplasty and Orbital Atherectomy Interventional Procedures
Rohit R. Deokar (2017)
Sequential Structural and Fluid Dynamics Analysis of Balloon-Expandable Coronary Stents: A Multivariable Statistical Analysis
David Martín (2015)
Effect of Plaque Composition on Biomechanical Performance of a Carotid Stent: Computational Study
Cui Xinyang (2018)
RRCC_A_173086 43..56
Muhammad Umer (2019)
Inflation and Instabilities of Hyperelastic Membranes
Amit Patil (2016)
Computational Modelling of Multi-folded Balloon Delivery Systems for Coronary Artery Stenting: Insights into Patient-Specific Stent Malapposition
Georgios E. Ragkousis (2014)
Oxygen Transport in Carotid and Stented Coronary Arteries
Eoin A Murphy (2017)
Computational fluid dynamics in complex aortic surgery: applications, prospects and challenges
Fan Shuen Tseng (2017)
Instability investigation on fluid-loaded pre-stretched cylindrical membranes
Amit Patil (2015)
A Novel Tram Stent Method in the Treatment of Coronary Bifurcation Lesions – Finite Element Study
Mark Christopher Arokiaraj (2016)
Fabrication and Evaluation of Multiple Memory Nitinol Stents for Biomedical Applications
Gitanjali Shanbhag (2017)
Numerical study to identify the effect of fluid presence on the mechanical behavior of the stents during coronary stent expansion.
Wookjin Lee (2020)
Modeling Active Anisotropic Materials Undergoing Finite Deformations
Yali Li (2017)
The influence of the nylon balloon stiffness on the efficiency of the intra-aortic balloon occlusion.
Tomasz Gajewski (2019)
First report on free expansion simulations of a dedicated bifurcation stent mounted on a stepped balloon.
Claudio Chiastra (2015)
A three-dimensional strain measurement method in elastic transparent materials using tomographic particle image velocimetry
Azuma Takahashi (2017)
See more
Semantic Scholar Logo Some data provided by SemanticScholar