Online citations, reference lists, and bibliographies.

Solubility Parameters Of Poly(vinylidene Fluoride)

A. Bottino, G. Capannelli, S. Munari, A. Turturro
Published 1988 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
The solubility behavior of poly(vinylidene fluoride) (PVDF) in about 50 liquids was investigated. The results were input to a computer program to obtain a three-dimensional representation of the polymer solubility region in the Hansen space; the values of dispersion, hydrogen bonding, and polar components of the total solubility parameter δt,P were evaluated. The latter was also estimated from limiting viscosity number data in the eight solvents found. Both experimental methods gave δt,P values in very good agreement. Comparisons among our findings, the literature, and calculated results are discussed.



This paper is referenced by
10.1002/APP.30105
Plasticizer effect of dibutyl phthalate on the morphology and mechanical properties of hard elastic poly(vinylidene fluoride) fibers
Chunhui Du (2009)
10.1063/1.4821751
Side-chain effects on the solution-phase conformations and charge photogeneration dynamics of low-bandgap copolymers.
Ming-Ming Huo (2013)
PREDICTION OF MECHANICAL PROPERTIES OF CARBON NANOTUBE/POLYVINYLIDENE FLUORIDE COMPOSITES BY HANSEN SOLUBILITY PARAMETERS METHOD
J. Ma (2011)
10.1016/B978-0-12-409547-2.12244-9
1.7 PVDF Hollow Fibers Membranes
Hideto Matsuyama (2017)
10.1016/J.JIEC.2016.12.034
Polyacrylonitrile mesoporous composite membranes with high separation efficiency prepared by fast freeze-extraction process
Ruixue Lv (2017)
10.1016/J.MEMSCI.2019.117321
Mechanically robust and highly methanol-resistant sulfonated poly(ether ether ketone)/poly(vinylidene fluoride) nanofiber composite membranes for direct methanol fuel cells
Guoliang Liu (2019)
10.1002/0471532053.BRA062
Solubility Parameter Values
E. Grulke (1999)
10.1002/APP.12846
Isothermal phase diagrams and phase-inversion behavior of poly(vinylidene fluoride)/solvents/additives/water systems
M. L. Yeow (2003)
DESALINATION BY MEMBRANE DISTILLATION: FABRICATION OF HIGH PERFORMANCE MEMBRANES
S. Bonyadi (2009)
10.1016/J.MEMSCI.2014.09.019
Tailoring novel fibrillar morphologies in poly(vinylidene fluoride) membranes using a low toxic triethylene glycol diacetate (TEGDA) diluent
Zhaoliang Cui (2015)
10.3390/membranes8010013
Assessment of Blend PVDF Membranes, and the Effect of Polymer Concentration and Blend Composition
I. Ali (2018)
10.1016/J.APSUSC.2015.04.027
Preparation of hydrophilic PVDF/PPTA blend membranes by in situ polycondensation and its application in the treatment of landfill leachate
Hongbin Li (2015)
10.1021/acsomega.8b03475
Chemical Postdeposition Treatments To Improve the Adhesion of Carbon Nanotube Films on Plastic Substrates
Ana Santidrián (2019)
10.1007/s11581-019-03060-y
Blending-based poly(vinylidene fluoride)/polymethyl methacrylate membrane for rechargeable lithium-ion batteries
Jiuqing Liu (2019)
10.1021/acsomega.9b02674
Improving the Performance of PVDF/PVDF-g-PEGMA Ultrafiltration Membranes by Partial Solvent Substitution with Green Solvent Dimethyl Sulfoxide during Fabrication
Qidong Wu (2019)
10.1002/adhm.201901287
Electrospinning Piezoelectric Fibers for Biocompatible Devices.
Bahareh Azimi (2019)
10.1016/B978-1-4557-7442-5.00010-3
Chapter 10 – Fluoroelastomers
Jiri George Drobny (2013)
10.1021/IE503986H
Facile Fabrication, Structure, and Applications of Polyvinyl Chloride Mesoporous Membranes
Nan Guo (2014)
10.1039/c4sm02800g
Solvent-dependent properties of poly(vinylidene fluoride) monolayers at the air-water interface.
Huie Zhu (2015)
10.1016/J.EURPOLYMJ.2017.08.055
Structure, morphology and wettability studies on Langmuir-Schaefer multilayer of poly(vinylidene fluoride)/poly(methyl methacrylate) blends
C. Kumar (2017)
10.1557/MRC.2019.19
3D printing of poly(vinylidene fluoride-trifluoroethylene): a poling-free technique to manufacture flexible and transparent piezoelectric generators
Nick A Shepelin (2019)
10.1109/TUFFC.2014.006666
Enhanced dielectric performance of BaTiO3/PVDF composites prepared by modified process for energy storage applications
Yujuan Niu (2015)
THE EFFECT OF LICL AND COAGULATION BATH TEMPERATURE ON THE STRUCTURE AND PERFORMANCE OF PVDF MEMBRANES
Sedaghat Marzieh (2015)
10.1016/J.MEMSCI.2016.09.030
Hydrophobic/hydrophilic PVDF/Ultem dual-layer hollow fiber membranes with enhanced mechanical properties for vacuum membrane distillation
J. Zuo (2017)
10.1590/S0104-66322014000100009
Clay nanoparticles effects on performance and morphology of poly(vinylidene fluoride) membranes
Ana Carolina Daniel Morihama (2014)
10.1007/s12221-018-8313-x
Superhydrophobic and Antibacterial Properties of Cotton Fabrics Treated with PVDF and nano-ZnO through Phase Inversion Process
G. W. Jin (2018)
10.1002/POLB.21924
Controlled Crystallization of Poly(vinylidene fluoride) Chains from Mixed Solvents Composed of Its Good Solvent and Nonsolvent
Xuejuan Zhao (2010)
SEAWATER DESALINATION BY FREEZE DESALINATION AND MEMBRANE DISTILLATION
C. Jian (2018)
10.1109/JSEN.2017.2667717
Piezoresistive Polymer-Based Materials for Real-Time Assessment of the Stump/Socket Interface Pressure in Lower Limb Amputees
A. Ferreira (2017)
10.1080/00222340801954811
Crystalline Phase Formation of Poly(vinylidene fluoride) from Tetrahydrofuran/N,N‐dimethylformamide Mixed Solutions
W. Ma (2008)
10.1111/J.1551-2916.2010.04364.X
Compatibility of PVB of Mixed Organic Solvents in Alumina Slurries and its Effect on Morphology of Green Sheets
Ryoichi Furushima (2011)
10.1088/2053-1591/AA985E
Predicting mechanical properties of polyvinylidene fluoride/carbon nanotube composites by molecular simulation
Hui-Lung Chen (2017)
See more
Semantic Scholar Logo Some data provided by SemanticScholar