Online citations, reference lists, and bibliographies.
Referencing for people who value simplicity, privacy, and speed.
Get Citationsy
← Back to Search

Composite Materials For Biomedical Applications

D. Chung
Published 2003 · Materials Science

Save to my Library
Download PDF
Analyze on Scholarcy Visualize in Litmaps
Share
Reduce the time it takes to create your bibliography by a factor of 10 by using the world’s favourite reference manager
Time to take this seriously.
Get Citationsy
The repair or reconstruction of damaged or diseased parts of the musculoskeletal system requires various implants [1,2]. In particular, implants are used for the internal fixation of fractured bones and joints (such as hips, knees, fingers and jaws). They can also serve as prosthetic heart valves, intervertebral disk spacers, teeth, tendons and ligaments.
This paper references
10.1016/S0263-8223(99)00020-3
3-D global/local analysis of composite hip prostheses – a model for multiscale structural analysis
S. Srinivasan (1999)
10.1016/S0921-5093(99)00717-0
Microstructure investigation of plasma sprayed HA/Ti6Al4V composites by TEM
K. Khor (2000)
10.1016/S0043-1648(97)00231-7
Coefficient of friction under dry and lubricated conditions of a fracture and wear resistant P/M titanium-graphite composite for biomedical applications
S. H. Teoh (1998)
10.1002/1097-4636(200010)52:1<66::AID-JBM9>3.0.CO;2-2
New bioactive, degradable composite microspheres as tissue engineering substrates.
Q. Qiu (2000)
10.4028/WWW.SCIENTIFIC.NET/KEM.192-195.801
In Vivo Comparison of Two Injectable Calcium Phosphate Biomaterials: Ionic Cement and Polymer-Associated Particulate Ceramic
O. Gauthier (2000)
10.1002/(SICI)1097-4636(200004)50:1<1::AID-JBM1>3.0.CO;2-W
Crystal polymer interaction with new injectable bone substitute; SEM and Hr TEM study.
G. Daculsi (2000)
10.1021/cen-v065n013.ibc
Adhesion and adhesives
A. Kinloch (1987)
10.1002/(SICI)1097-4636(19980615)40:4<520::AID-JBM2>3.0.CO;2-H
Collagen/apatite coating on 3-dimensional carbon/carbon composite.
S. Li (1998)
10.1016/S0142-9612(00)00215-5
A study of HAp/PLLA composite as a substitute for bone powder, using FT-IR spectroscopy.
N. Ignjatović (2001)
10.1002/1097-4636(2000)53:6<717::AID-JBM15>3.0.CO;2-H
Influence of filler content on static properties of glass-reinforced bone cement.
C. Vallo (2000)
10.1557/PROC-599-109
Biomimetic Coatings on Orthopedic Implants: a Review
K. Groot (1999)
10.1002/(SICI)1097-4636(19980315)39:4<660::AID-JBM22>3.0.CO;2-9
In vitro evaluation of a new injectable calcium phosphate material.
G. Grimandi (1998)
10.1016/S0924-0136(97)00086-1
Post-spray hot isostatic pressing of plasma sprayed Ti6Al4V/hydroxyapatite composite coatings
K. Khor (1997)
10.1002/(SICI)1098-2329(199711)16:4<263::AID-ADV2>3.0.CO;2-T
Structure development and control of injection‐molded hydroxylapatite‐reinforced starch/EVOH composites
R. Reis (1997)
10.1023/A:1008977106648
Frictional characteristics of composite orthodontic archwires against stainless steel and ceramic brackets in the passive and active configurations
S. W. Zufall (1998)
10.1002/JBM.820210110
Tissue biocompatibility of kevlar aramid fibers and polymethylmethacrylate, composites in rabbits.
J. D. Henderson (1987)
10.1016/S0142-9612(97)00118-X
Review of the biological response to a novel bone cement containing poly(ethyl methacrylate) and n-butyl methacrylate.
P. Revell (1998)
10.1080/03602559008049857
Polymers in Surgery: Problems and Prospects
L. G. Privalova (1990)
10.1023/A:1018567216717
The development of P/M titanium--graphite triphasic composites for biomedical applications
S. H. Teoh (1997)
10.1002/(SICI)1097-4636(200002)49:2<250::AID-JBM14>3.0.CO;2-F
Adherence of Streptococcus mutans to an E-glass fiber-reinforced composite and conventional restorative materials used in prosthetic dentistry.
J. Tanner (2000)
10.1016/S1350-4533(97)00008-8
Mechanical simulation of composite hip stems.
C. Kaddick (1997)
10.1002/(SICI)1097-4636(19971205)37:3<353::AID-JBM6>3.0.CO;2-K
Fiber-matrix interface studies on bioabsorbable composite materials for internal fixation of bone fractures. II. A new method using laser scanning confocal microscopy.
M. Slivka (1997)
10.1016/S0301-679X(98)00088-7
Carbon fiber reinforced polyether ether ketone composite as a bearing surface for total hip replacement
A. Wang (1998)
10.1016/0167-7799(92)90194-Z
Responsive polymer systems for controlled delivery of therapeutics.
J. Kost (1992)
10.1002/JBM.820180411
Mechanical properties of bone cement: a review.
S. Saha (1984)
10.1002/(SICI)1097-4636(199708)36:2<137::AID-JBM1>3.0.CO;2-L
Glass peek composite promotes proliferation and osteocalcin production of human osteoblastic cells.
T. W. Lin (1997)
10.2109/JCERSJ.100.362
Properties of Functionally Gradient Composite Consisting of Hydroxyapatite Containing Glass Coated Titanium and Characters for Bioactive Implant
S. Maruno (1992)
10.1016/S0924-0136(99)00060-6
Thermal processing of hydroxyapatite reinforced polyetheretherketone composites
M. H. A. Bakar (1999)
10.1016/S0032-3861(00)00165-8
Preparation and characterisation of composites based on biodegradable polymers for “in vivo” application
L. Calandrelli (2000)
10.1081/MA-100101536
STRENGTH, ABRASIVE WEAR, AND DURABILITY PROPERTIES OF DENTAL COMPOSITES CONTAINING A FLUORINATED DIMETHACRYLATE REACTIVE DILUENT
G. Wang (1999)
10.1002/(SICI)1097-4636(1999)48:2<108::AID-JBM2>3.0.CO;2-F
Cell culture test of TCP/CPLA composite.
M. Kikuchi (1999)
10.1080/10667857.1997.11752728
The Status of Biomaterials for Orthopedic and Dental Applications: Part I – Materials
P. Lutton (1997)
10.1023/A:1017537903887
Al2O3 and Al2O3--TiN wear resistance in a simulated biological environment
S. Bégin-Colin (1998)
10.1002/(SICI)1521-4044(199810)49:10/11<526::AID-APOL526>3.0.CO;2-C
Biopolymers as drug carriers and bioactive macromolecules
A. Domb (1998)
Leachable components in polymeric medical implants and disposables: a brief critical review.
Bruck Sd (1990)
10.1016/S0142-9612(96)00163-9
Resorption of composite polymer-hydroxyapatite membranes: a time-course study in rabbit.
A. Piattelli (1997)
10.1023/A:1008916901009
Dynamic mechanical properties of hydroxyapatite-reinforced and porous starch-based degradable biomaterials
J. Mano (1999)
10.1023/A:1018590229166
Synthesis of BISGMA derivatives, properties of their polymers and composites
B. Sandner (1997)
10.1557/PROC-599-45
Bioactive Hydroxyapatite-Polysulfone Composite for Tissue Replacement
B. Chua (1999)
10.4028/WWW.SCIENTIFIC.NET/KEM.192-195.467
3-D Bone Tissue Engineering with Bioactive, Resorbable Microcarriers
Qing-Qing Qiu (2000)
10.1016/S0043-1648(99)00026-5
Suitability and limitations of carbon fiber reinforced PEEK composites as bearing surfaces for total joint replacements
A. Wang (1999)
10.1557/JMR.1998.0015
Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants
W. Suchanek (1998)
10.1023/A:1008953529111
Biomechanical and biological properties of the implant material carbon-carbon composite covered with pyrolytic carbon
V. Pešáková (2000)
10.1002/(SICI)1097-4636(19990315)44:4<446::AID-JBM11>3.0.CO;2-F
Poly(alpha-hydroxyl acids)/hydroxyapatite porous composites for bone-tissue engineering. I. Preparation and morphology.
R. Zhang (1999)
10.1177/088532829200700204
Modern Wound Dressings: A Systematic Approach to Wound Healing
M. Szycher (1992)
10.1016/0267-6605(91)90067-P
Biocompatibility of poly (DL-lactic acid/glycine) copolymers.
J. Schakenraad (1991)
10.1002/1097-4636(20000905)51:3<424::AID-JBM17>3.0.CO;2-E
In vitro bioactivity and gentamicin release from glass-polymer-antibiotic composites.
C. Ragel (2000)
10.1002/(SICI)1097-4636(19970915)36:4<469::AID-JBM4>3.0.CO;2-C
Fiber-matrix interface studies on bioabsorbable composite materials for internal fixation of bone fractures. I. Raw material evaluation and measurement of fiber-matrix interfacial adhesion.
M. Slivka (1997)
10.1002/(SICI)1097-4636(19991205)47:3<324::AID-JBM6>3.0.CO;2-Y
In vitro analysis of biodegradable polymer blend/hydroxyapatite composites for bone tissue engineering.
K. Marra (1999)
10.1023/A:1018542313236
A study of cell behaviour on the surfaces of multifilament materials
H. Wan (1997)
10.1002/(SICI)1097-4628(19981128)70:9<1689::AID-APP6>3.0.CO;2-V
Novel organic–inorganic chemical hybrid fillers for dental composite materials
Y. Wei (1998)
10.1023/A:1018526226382
Fixation of carbon fibre-reinforced carbon composite implanted into bone
M. LEWANDOWSKA-SZUMIEŁ (1997)
10.1002/1097-4636(2000)53:4<408::AID-JBM15>3.0.CO;2-O
Glass-matrix biocomposites.
E. Verné (2000)
10.1007/BF02646320
Ti- 6Al-4V/hydroxyapatite composite coatings prepared by thermal spray techniques
K. Khor (1997)
Good vibrations : materials swing into action
M. Jenkins (2000)
10.1016/S0266-3538(99)00155-4
Design of a controlled-stiffness composite proximal femoral prosthesis
J. A. Simões (2000)
10.1023/A:1018519419539
Fourier-transform infrared spectroscopy study of an organic–mineral composite for bone and dental substitute materials
P. Weiss (1997)
10.1002/(SICI)1097-4636(199810)42:1<6::AID-JBM2>3.0.CO;2-U
Viscoelastic behavior of composite ligament prostheses.
L. Ambrosio (1998)
10.1002/(SICI)1097-4628(19990321)71:12<2033::AID-APP13>3.0.CO;2-I
Synthesis and photopolymerization of multifunctional methacrylates derived from Bis-GMA for dental applications
K. Ahn (1999)
10.1002/1097-4628(20000923)77:13<2929::AID-APP16>3.0.CO;2-Q
Preparation and characterization of hydroxyapatite/chitosan–gelatin network composite
Y. J. Yin (2000)
10.1002/JBM.820261206
The fracture toughness of titanium-fiber-reinforced bone cement.
L. Topoleski (1992)
10.1007/BF02790343
Short term tissue response to carbon fibre: A preliminaryin vitro andin vivo study
M. Mohanty (1998)
10.4028/WWW.SCIENTIFIC.NET/KEM.192-195.243
Emulsion Crosslinking as a New Manufacturing Route to Produce Hydroxylapatite Particulates in a Network of Starch
P. B. Malafaya (2000)
10.1023/A:1018589018205
Morphology and ultrastructure of the interface between hydroxyapatite-polyhydroxybutyrate composite implant and bone
Z. Luklinska (1997)
10.1016/S0142-9612(96)00067-1
Experimental study of mechanical properties of composite carbon screws.
S. Błażewicz (1997)
10.4028/www.scientific.net/KEM.192-195.685
Bioactive Glass-Polymer Composite for Experimental Bone Reconstruction
A. Aho (2000)
10.1016/S0142-9612(98)00127-6
Mechanical properties and aesthetics of FRP orthodontic wire fabricated by hot drawing.
T. Imai (1998)
10.1002/(SICI)1097-4636(20000605)50:3<410::AID-JBM16>3.0.CO;2-Y
Histomorphometric study on high-strength hydroxyapatite/poly(L-lactide) composite rods for internal fixation of bone fractures.
T. Furukawa (2000)
10.4028/www.scientific.net/MSF.352.143
Analysis of In Vivo Substitution of Bone Tissue by HAp/PLLA Composite Biomaterial with PLLA of Different Molecular Weights Using FTIR Spectroscopy
N. Ignjatović (2000)
10.1016/0142-9612(93)90028-Z
Behaviour of titanium and titania-based ceramics in vitro and in vivo.
J. Li (1993)
10.1002/1097-4636(2000)53:4<381::AID-JBM12>3.0.CO;2-H
Physicochemical evaluation of bioactive polymeric composites based on hybrid amorphous calcium phosphates.
D. Škrtić (2000)
10.1023/A:1018585432105
Characteristics of carbon fibre-reinforced calcium phosphate composites fabricated by hot pressing
K. Park (1997)
10.1016/S0142-9612(98)00027-1
Mechanical properties and strength retention of carbon fibre-reinforced liquid crystalline polymer (LCP/CF) composite: an experimental study on rabbits.
J. Kettunen (1998)
10.1023/A:1004484703341
The fabrication and properties of aesthetic FRP wires for use in orthodontics
F. Watari (1998)
10.1002/1097-4636(200102)54:2<284::AID-JBM16>3.0.CO;2-W
Engineering new bone tissue in vitro on highly porous poly(alpha-hydroxyl acids)/hydroxyapatite composite scaffolds.
P. Ma (2001)
10.1007/BF00591494
The processing and static mechanical properties of metal fibre reinforced bioglass
P. Ducheyen (1982)
10.1002/(SICI)1097-4636(199801)39:1<161::AID-JBM18>3.0.CO;2-I
Bioactive glass fiber/polymeric composites bond to bone tissue.
M. Marcolongo (1998)
10.1002/(SICI)1097-4636(1999)48:3<289::AID-JBM12>3.0.CO;2-L
Interaction between carbon composites and bone after intrabone implantation.
M. Lewandowska-Szumieł (1999)
10.1002/(SICI)1097-4636(19971205)37:3<440::AID-JBM15>3.0.CO;2-F
Surface reaction layer formation in vitro on a bioactive glass fiber/polymeric composite.
M. Marcolongo (1997)
10.1016/S0142-9612(99)00003-4
Water sorption, solubility and effect of post-curing of glass fibre reinforced polymers.
V. Miettinen (1999)
10.1002/(SICI)1097-4636(199807)41:1<8::AID-JBM2>3.0.CO;2-N
Cyclic anhydride ring opening reactions: theory and application.
J. K. West (1998)
10.1023/A:1008965626695
Interdiffusion in short-fibre reinforced hydroxyapatite ceramics
Markus Knepper (1998)
10.1016/S0266-3538(97)00140-1
Fibre reinforcement of ceramic/polymer composites for a major load-bearing bone substitute material
N. H. Ladizesky (1998)
10.1016/S0142-9612(97)00128-2
Chemistry of glass-ionomer cements: a review.
J. Nicholson (1998)
10.1080/10667857.1996.11752708
The Applications of Functionally Graded Materials in Japan
Y. Miyamoto (1996)
10.4028/www.scientific.net/MSF.250.53
Porous Hydrogels for Neural Tissue Engineering
S. Woerly (1997)
10.1016/S0143-7496(98)00027-X
Adhesive dental materials : A review
John William Nicholson (1998)
10.4028/www.scientific.net/MSF.250.115
Biodegradable PLA-PGA Polymers for Tissue Engineering in Orthopaedics
C. Agrawal (1997)
10.1016/S0167-577X(00)00026-4
Chemically coupled hydroxyapatite-polyethylene composites: processing and characterisation
M. Wang (2000)
10.1177/088532829701100304
Continuous Fiber Reinforced Composite Materials as Alternatives for Metal Alloys Used for Dental Appliances
A. Karmaker (1997)
10.4028/WWW.SCIENTIFIC.NET/MSF.308-311.344
Bone Bonding Studies and Implant Application of HA-G-Ti Functionally Gradient Composites
S. Maruno (1999)
10.1023/A:1008952111545
Macroporous hydroxyapatite as alloplastic material for dental applications
G. Carotenuto (1999)
10.1002/(SICI)1097-4636(199807)41:1<1::AID-JBM1>3.0.CO;2-N
In vivo degradation of a poly(propylene fumarate)/beta-tricalcium phosphate injectable composite scaffold.
S. Peter (1998)
10.4028/WWW.SCIENTIFIC.NET/KEM.192-195.725
Bioactive Glass Fiber/Polylactide Composite
E. Pirhonen (2000)
10.1002/(SICI)1097-0126(1998100)47:2<89::AID-PI86>3.0.CO;2-F
A review of biodegradable polymers: uses, current developments in the synthesis and characterization of biodegradable polyesters, blends of biodegradable polymers and recent advances in biodegradation studies
W. Amass (1998)
10.1016/S0142-9612(00)00117-4
Bioabsorbable scaffolds for guided bone regeneration and generation.
M. Kellomäki (2000)
10.1016/0267-6605(93)90009-V
The characteristics and performance of dentine bonding agents.
S. A. Ali (1993)
10.1002/JBM.820231005
Tissues at the surface of the new composite material titanium/glass-ceramic for replacement of bone and teeth.
C. Müller-Mai (1989)
10.1016/S0021-9290(98)00061-X
The effect of hip stem material modulus on surface strain in human femora.
T. Vail (1998)
10.4028/www.scientific.net/KEM.32.35
The Durability of Materials used in Orthopaedic Implants
D. Taylor (1991)
10.1109/SBEC.1997.583226
Reticulated ceramic composites for hard tissue replacements
K. Thorne (1997)
10.1002/(SICI)1097-4636(199708)36:2<209::AID-JBM9>3.0.CO;2-O
Molecular orbital models of ring expansion mechanisms in the silica-carbon monoxide system.
J. K. West (1997)
10.1016/S0257-8972(97)00576-8
Adhesion and microstructural characterization of plasma-sprayed hydroxyapatite/glass ceramic coatings onto Ti-6A1-4V substrates
P. L. Silva (1998)
10.1243/0954411981533863
Composite hydrogels for implants
L. Ambrosio (1998)
10.1002/PEN.11518
Polylactide (PLA)—a new way of production
S. Jacobsen (1999)
10.1002/(SICI)1097-4636(199910)47:1<28::AID-JBM4>3.0.CO;2-P
Kinetic study of bone ingrowth and ceramic resorption associated with the implantation of different injectable calcium-phosphate bone substitutes.
O. Gauthier (1999)
10.4028/WWW.SCIENTIFIC.NET/KEM.192-195.705
Development of Highly Bioactive and Mechanically Strong Starch Thermoplastic/Bioglass® Composite Biomaterials
I. B. Leonor (2000)
10.1016/0267-6605(89)90021-8
Suture materials: A review
I. Capperauld (1989)
10.1016/0141-3910(91)90080-B
Degradation of polyurethanes in biomedical applications—A review
H. Griesser (1991)
10.1557/PROC-550-155
Novel three Dimensional Biodegradable Scaffolds for Bone Tissue Engineering
K. Marra (1998)
10.4028/WWW.SCIENTIFIC.NET/KEM.192-195.677
In Vitro Test and Application for Guided Bone Regeneration of ß-Tricalcium Phosphate / Poly-(Lactide-Glycolic acid-ε-Caprolactone) Composites
M. Kikuchi (2000)
10.1016/0261-3069(86)90052-X
Development of materials based on acid-base reaction cements
H. Prosser (1986)
10.1243/0954411981534213
Polymers in dentistry
S. Deb (1998)
10.1016/0267-6605(92)90088-B
Biodegradable implants in orthopaedic surgery--a review on the state-of-the-art.
G. Hofmann (1992)
10.1016/0079-6700(90)90009-P
Organic polymer surfaces for use in medicine: Their formation, modification, characterisation and application
J. Braybrook (1990)
10.1023/A:1008902027278
The formation of hydroxyapatite–calcium polyacrylate composites
K. E. Watson (1999)
10.1080/15321799408014168
Water-Absorbent Polymers: A Patent Survey
R. Po (1994)
10.1002/(SICI)1097-4628(19991017)74:3<735::AID-APP28>3.0.CO;2-U
Urethane tetramethacrylates: Novel substitutes as resin matrix in radiopaque dental composites
V. K. Krishnan (1999)
10.1109/IBED.1998.710601
Production of hydroxylapatite reinforced polymer composites for biomedical applications
A. Sendemir (1998)



This paper is referenced by
Semantic Scholar Logo Some data provided by SemanticScholar