Online citations, reference lists, and bibliographies.

Fiber Reinforced SCC

Liberato Ferrara
Published 2014 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
This paper references
10.1016/J.ENGSTRUCT.2010.09.023
The composite effect of steel fibres and stirrups on the shear behaviour of beams using self-consolidating concrete
Yining Ding (2011)
10.1016/J.CEMCONCOMP.2005.10.003
Self-compacting concrete: An analysis of 11 years of case studies
P. Domone (2006)
10.1617/S11527-010-9666-9
Numerical simulation of fresh SCC flow: applications
Annika Gram (2011)
10.1016/J.CEMCONRES.2007.06.007
Computational modeling of concrete flow: General overview
Nicolas P. Roussel (2007)
Ph
李幼升 (1989)
10.1016/S0008-8846(01)00566-X
A simple mix design method for self-compacting concrete
Nan Su (2001)
10.1016/J.CEMCONCOMP.2006.07.010
A review of the hardened mechanical properties of self-compacting concrete
P. Domone (2007)
10.1016/J.CEMCONRES.2006.01.010
Influence of Polypropylene Fiber Geometry on Plastic Shrinkage Cracking in Concrete
N. Banthia (2006)
10.1533/9780857093103
Brittle matrix composites 10
A. Brandt (1986)
10.1016/J.CEMCONRES.2010.06.005
The mini-conical slump flow test: Analysis and numerical study
A. Bouvet (2010)
Comportement rhéologique et mise en œuvre des matériaux cimentaires fibrés
Laëtitia Martinie (2010)
10.1007/BF02485970
Validation of BTRHEOM, the new rheometer for soft-to-fluid concrete
C. Hu (1996)
10.1016/J.CEMCONCOMP.2010.10.009
Adhesive and rheological properties of fresh fibre-reinforced mortars
Abdelhak Kaci (2011)
10.14359/51664081
Experience with Self-Consolidating High-Performance Fiber-Reinforced Mortar and Concrete
Wen Cheng Liao (2010)
10.14359/20197
Identifying Viscosity of Cement Paste from Mini-Slump-Flow Test
N. Tregger (2008)
10.1617/S11527-005-9017-4
Relationships between fibre distribution, workability and the mechanical properties of SFRC applied to precast roof elements
L. Ferrara (2005)
10.1201/9781482272055
Concrete Mixture Proportioning: A Scientific Approach
F. Larrard (1999)
10.1061/(ASCE)0899-1561(2008)20:7(493)
Correlation among Fresh State Behavior, Fiber Dispersion, and Toughness Properties of SFRCs
L. Ferrara (2008)
10.1111/J.1151-2916.1992.TB05502.X
Packing of Ternary Mixtures of Nonspherical Particles
A. Yu (1992)
10.1002/NAG.924
Modelling the flow of self-compacting concrete
S. Kulasegaram (2011)
Flexural performance of reinforced concrete beams repaired with fiber-reinforced SCC
H. Mesbah (2007)
10.1016/J.CEMCONRES.2011.05.008
Simple tools for fiber orientation prediction in industrial practice
L. Martinie (2011)
10.1617/S11527-011-9793-Y
A magnetic method for non destructive monitoring of fiber dispersion and orientation in steel fiber reinforced cementitious composites—part 1: method calibration
L. Ferrara (2012)
10.1016/J.CONBUILDMAT.2011.07.015
Influence of yield stress and compressive strength on direct shear behaviour of steel fibre-reinforced concrete
Bensaid Boulekbache (2012)
10.1617/S11527-007-9259-4
Modelling the influence of age of steel fibre reinforced self-compacting concrete on its compressive behaviour
V. Cunha (2008)
10.1016/J.CONBUILDMAT.2010.02.025
Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material
B. Boulekbache (2010)
10.1617/S11527-009-9553-4
Predicting the pullout response of inclined straight steel fibers
F. Laranjeira (2010)
The use of steel fibres in self-compacting concrete
P. Groth (1999)
10.1617/S11527-012-9839-9
A study on the mechanical properties of self-compacting concrete at high temperature and after cooling
Patrick Bamonte (2012)
10.1016/J.CEMCONCOMP.2011.02.007
Ductility of fiber-reinforced self-consolidating concrete under multi-axial compression
A. Fantilli (2011)
10.1122/1.3000732
Modeling fiber interactions in semiconcentrated fiber suspensions
Julien Férec (2009)
10.1617/S11527-011-9794-X
A magnetic method for non destructive monitoring of fiber dispersion and orientation in steel fiber reinforced cementitious composites. Part 2: Correlation to tensile fracture toughness
L. Ferrara (2012)
Experimental Study on the Bond between Steel Reinforcement and Self-Compacting High Strength Fiber Reinforced Cementitious Composites
Angus K.F. Cheung (2008)
10.14359/56499
Behavior of Columns Constructed with Fibers and Self-Consolidating Concrete
H. Aoude (2009)
10.1016/J.CEMCONRES.2003.08.005
A generalized approach for the determination of yield stress by slump and slump flow
Aaron W. Saak (2004)
10.1201/9781482267006
Workability and quality control of concrete
G. Tattersall (1991)
10.1680/MACR.1999.51.3.171
Developments of the two-point workability test for high-performance concrete
P. Domone (1999)
10.1007/BF02539271
State-of-the-art report
P. Jernberg (1997)
10.1617/S11527-006-9190-0
SCC casting prediction for the realization of prototype VHPC-precambered composite beams
N. Roussel (2007)
10.1617/S11527-010-9613-9
High mechanical performance of fibre reinforced cementitious composites: the role of “casting-flow induced” fibre orientation
L. Ferrara (2011)
10.1007/978-90-481-9664-7_35
Flow-Induced Fiber Orientation in SCSFRC: Monitoring and Prediction
L. Ferrara (2010)
10.1016/S0301-9322(01)00021-0
Modeling and numerical simulation of particulate flows by the Eulerian–Lagrangian approach
N. Patankar (2001)
10.1016/J.CONBUILDMAT.2011.08.052
Correlating dynamic segregation of self-consolidating concrete to the slump-flow test
Nathan Tregger (2012)
10.14359/51664074
Flow Characteristics of Macro-Synthetic Fiber-Reinforced Self-Consolidating Concrete
D. Forgeron (2010)
10.1007/S00397-009-0393-5
Lubricated compression and X-ray microtomography to analyse the rheology of a fibre-reinforced mortar
F. Chalencon (2010)
Tension stiffening of high performance fiber reinforced concrete
R. Shionaga (2007)
10.1061/(ASCE)MT.1943-5533.0000001
Pullout Behavior of Steel Fibers in Self-Compacting Concrete
V. Cunha (2010)
10.1016/J.CEMCONRES.2011.06.012
Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures
Wasim Khaliq (2011)
10.14359/19976
Shear Behavior of Fiber-Reinforced Self-Consolidating Concrete Slender Beams
T. Greenough (2008)
Performance-based design of self-compacting fibre reinforced concrete
Steffen Grünewald (2004)
10.14359/2141
Bond Behavior of Normal and High-Strength Fiber Reinforced Concrete
A. Ezeldin (1989)
10.1016/S0301-9322(01)00025-8
Lagrangian numerical simulation of particulate flows
N. Patankar (2001)
10.14359/18905
Fresh and Hardened Properties of Self-Consolidating Fiber-Reinforced Concrete
H. B. Dhonde (2007)
10.14359/14249
Influence of Different Fibers on Plastic Shrinkage Cracking of Concrete
A. Naaman (2005)
10.1061/(ASCE)0733-9445(2008)134:8(1310)
Steel Fiber-Reinforced Self-Compacting Concrete: Experimental Research and Numerical Simulation
E. Pereira (2008)
10.1109/TIM.2010.2090059
Nondestructive Testing of Steel-Fiber-Reinforced Concrete Using a Magnetic Approach
M. Faifer (2011)
10.14359/9751
Effect of Steel Fiber Reinforcement on Fresh Mix Propertiesof Concrete
M. Z. Bayasi (1992)
10.1007/978-90-481-9664-7_37
Long-Term Behaviour of Fiber-Reinforced Self-Compacting Concrete Beams
Nicola Buratti (2010)
10.1016/J.CEMCONRES.2006.05.026
Non-destructive monitoring of fiber orientation using AC-IS: An industrial-scale application
N. Ozyurt (2006)
10.14359/13066
Comparison of Field-Oriented Test Methods to Assess Dynamic Stability of Self-Consolidating Concrete
K. H. Khayat (2004)
10.14359/10841
New Methodology for Designing Self-Compacting Concrete
Aaron W. Saak (2001)
10.1002/NAG.419
Numerical modelling of concrete flow: homogeneous approach
F. Dufour (2005)
10.1051/PARASITE/2014024
Proceedings of the International Symposium
D. Vuitton (2014)
10.1016/J.CEMCONRES.2011.05.009
The relation between fiber orientation and tensile behavior in an Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRCC)
S. Kang (2011)
10.1122/1.2982932
Rheological modeling of carbon nanotube aggregate suspensions
W. K. A. Ma (2008)
10.1016/J.CEMCONRES.2012.02.013
Framework to predict the orientation of fibers in FRC: A novel philosophy
Felipe Ferreira Laranjeira (2012)
10.1007/978-90-481-9664-7_34
Fiber-Reinforced Cementitious Materials: From Intrinsic Isotropic Behavior to Fiber Alignment
Laetitia Martinie (2010)
10.1016/J.CEMCONRES.2007.03.014
A method for mix-design of fiber-reinforced self-compacting concrete
L. Ferrara (2007)
10.1617/S11527-010-9686-5
Characterization of the orientation profile of steel fiber reinforced concrete
F. Laranjeira (2011)
Identification of the stress-crack opening behavior of HPFRCC: the role of flow-induced fiber orientation
L. Ferrara (2010)
On the connections between fresh state behavior, fiber dispersion and toughness properties of steel fiber reinforced concrete
M. Prisco (2007)
Shrinkage cracking of steel fibre reinforced self compacting concrete overlays: test methods and theoretical modelling : test methods and theoretical modelling
Jonas Carlswärd (2006)
10.1122/1.3103546
Rheological behavior of fiber-filled model suspensions: Effect of fiber flexibility
M. Keshtkar (2009)
10.14359/56658
Modeling Dynamic Segregation of Self-Consolidating Concrete
Lin Shen (2009)
10.1016/J.CEMCONRES.2009.08.032
Rheology of Fiber Reinforced Cementitious Materials: Classification and Prediction
L. Martinie (2010)
10.14359/13116
Evaluation of static stability of self-consolidating concrete
J. Assaad (2004)
10.1109/TGRS.2004.837332
Nondestructive determination of the steel fiber content in concrete slabs with an open-ended coaxial probe
S. V. Damme (2004)
10.1016/J.CEMCONCOMP.2010.07.001
Strengthening and repair of RC beams with fiber reinforced concrete
G. Martinola (2010)
10.14359/13119
Drying shrinkage of concrete reinforced with fibers and welded-wire fabric
T. Voigt (2004)
10.1617/S11527-009-9504-0
Mechanical properties of steel fibre reinforced concrete exposed at high temperatures
Matteo Colombo (2010)
10.1002/9780470141502.CH2
Intrinsic Viscosity and the Polarizability of Particles Having a Wide Range of Shapes
J. Douglas (2007)
10.1617/S11527-006-9131-Y
Mechanical behaviour of self-compacting concrete with hybrid fibre reinforcement
G. Pons (2007)
10.1016/J.CEMCONRES.2006.03.001
Relationship between the Bingham parameters and slump
Jón Elvar Wallevik (2006)
10.1016/J.CEMCONRES.2006.10.015
Rheology of fiber-reinforced cementitious materials
K. Kuder (2007)
10.4334/IJCSM.2007.1.1.003
Cracking of Fiber-Reinforced Self-Compacting Concrete due to Restrained Shrinkage
Seung Hee Kwon (2007)
10.14359/56655
Abrasion Resistance of Concrete in Hydraulic Structures
Andrej Kryžanowski (2009)
10.1016/J.NDTEINT.2008.03.008
Characterisation of fibres distribution in a steel fibre reinforced concrete with electrical resistivity measurements
J. Lataste (2008)
Rotation capacity of self-compacting steel fiber reinforced concrete
P. Schumacher (2006)
10.1617/S11527-007-9229-X
On flow properties, fibre distribution, fibre orientation and flexural behaviour of FRC
P. Stähli (2008)
10.14359/12363
Impact Response of Ultra-High-Strength Fiber-Reinforced Cement Composite
V. Bindiganavile (2002)
10.1023/A:1017986608910
Analysis of the impedance spectra of short conductive fiber-reinforced composites
J. M. Torrents (2001)
10.14359/12364
RHEOLOGICAL MODEL FOR SELF-CONSOLIDATING CONCRETE
V. K. Bui (2002)
10.14359/56657
Modeling Static Segregation of Self-Consolidating Concrete
Lin Shen (2009)
Design-oriented constitutive model for steel fiber reinforced concrete
Filipe Laranjeira de Oliveira (2010)
10.1016/J.CONBUILDMAT.2009.11.008
Placing conditions, mesostructural characteristics and post-cracking response of fibre reinforced self-compacting concretes
M. C. Torrijos (2010)
10.1007/S40571-014-0002-Y
3D modelling of the flow of self-compacting concrete with or without steel fibres. Part I: slump flow test
R. Deeb (2014)
10.1533/9780857093103.287
THE USE OF VISCOSITY ENHANCING ADMIXTURES TO IMPROVE THE HOMOGENEITY OF FIBRE DISTRIBUTION IN STEEL FIBRE REINFORCED CONCRETES
L. Ferrara (2003)
10.1617/S11527-005-9035-2
Correlation between Yield Stress and Slump: Comparison between Numerical Simulations and Concrete Rheometers Results
Nicolas P. Roussel (2005)
10.1016/S0377-0257(99)00069-5
The rheology of fibre suspensions
C. Petrie (1999)
10.1617/2912143624.030
Passing ability of self-compacting fibre reinforced concrete
S. Gruenewald (2005)
10.1016/J.CONBUILDMAT.2007.05.008
Physical–mechanical properties, and mesostructure of plain and fibre reinforced self-compacting concrete
M. C. Torrijos (2008)
10.1016/0262-5075(84)90046-0
The rheology of fresh concrete
G. Tattersall (1983)
10.1016/J.CEMCONCOMP.2004.06.003
Characterizing fiber dispersion in cement composites using AC-Impedance Spectroscopy
L. Woo (2005)
10.1007/BF02479648
Testing and performance of fiber-reinforced, self-consolidating concrete
K. H. Khayat (2000)
10.1139/L02-066
The effects of fibers on the confinement models for concrete columns
G. Campione (2002)
10.1617/S11527-012-9821-6
Experimental investigation of surface crack initiation, propagation and tension stiffening in self-compacting steel–fibre-reinforced concrete
Anette M Jansson (2012)
10.1111/J.1151-2916.1993.TB04021.X
Porosity Calculation of Binary Mixtures of Nonspherical Particles
A. Yu (1993)
Mix-design optimization of steel fiber reinforced SCC
Liberato Ferrara (2008)
10.14359/51664077
Prediction of Stress Development and Cracking in Steel Fiber-Reinforced Self-Compacting Concrete Overlays Due to Restrained Shrinkage
Jonas Carlswärd (2010)
10.1016/J.CEMCONRES.2010.05.005
Predicting the pullout response of inclined hooked steel fibers
Felipe Ferreira Laranjeira (2010)
10.1098/rspa.1922.0078
The motion of ellipsoidal particles immersed in a viscous fluid
G. Jeffery (1922)
10.12968/SECE.2009.11.1632
A scientific approach
Julie Rose (2009)
10.14359/18156
Monitoring fiber dispersion in fiber-reinforced cementitious materials: Comparison of AC-impedance spectroscopy and image analysis
N. Ozyurt (2006)
10.3151/JACT.1.5
Self-Compacting Concrete
Hajime Okamura (2003)
10.1617/S11527-007-9327-9
Predicting the flexural load–deflection response of steel fibre reinforced concrete from strain, crack-width, fibre pull-out and distribution data
P. A. Jones (2008)
10.1122/1.1879041
“Fifty-cent rheometer” for yield stress measurements: From slump to spreading flow
N. Roussel (2005)
10.1016/J.CONBUILDMAT.2011.07.004
Flow characteristics and acceptance criteria of fiber-reinforced self-compacted concrete (FR-SCC)
A. El-Dieb (2012)
10.1016/J.JNNFM.2008.05.003
Flow-induced orientation of non-spherical particles: Effect of aspect ratio and medium rheology
D. Z. Gunes (2008)
10.14359/9736
INFLUENCE OF STEEL FIBERS ON TENSION STIFFENING
Homayoun H. Abrishami (1997)
Cobertura pré-fabricada em betão auto-compactável reforçado com fibras de aço
Delfina Gonçalves (2010)
Predicting dynamic segregation resistance of self-consolidating concrete from the slump-flow test
Nathan Tregger (2010)
10.14359/7151
STEEL FIBERS AS SHEAR REINFORCEMENT IN BEAMS
G. Batson (1972)
10.1007/S00397-007-0166-Y
Shear influence on fibre orientation
R. Holm (2007)
10.1016/J.CEMCONRES.2005.06.002
Self-Compacting Concrete: Theoretical and Experimental Study
H. J. Brouwers (2005)
10.1016/J.ENGFRACMECH.2006.01.028
Manufacturing, fibre anisotropy and fracture of hybrid fibre concrete
P. Stähli (2007)
10.1016/J.CEMCONRES.2004.08.019
The Marsh Cone: A Test Or a Rheological Apparatus?
Nicolas P. Roussel (2005)
10.14359/51683829
Effect of Beam Size, Casting Method, and Support Conditions on Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete
K. Wille (2012)
10.14359/281
Predicting the Flexural Postcracking Performance of Steel Fiber Reinforced Concrete from the Pullout of Single Fibers
Hugo S. Armelin (1997)
10.1016/J.CEMCONRES.2009.08.018
Prediction of the Plastic Viscosity of Self-compacting Steel Fibre Reinforced Concrete
Akbar Ghanbari (2009)
10.1007/S003970000135
Investigation of fiber motion near solid boundaries in simple shear flow
K. Moses (2001)
10.1016/J.CEMCONCOMP.2006.08.006
Correlation of fiber dispersion, rheology and mechanical performance of FRCs
N. Ozyurt (2007)
10.1007/978-3-540-72448-3_48
Virtual concrete laboratory — Continuous numerical modelling of concrete from fresh to the hardened state
V. Mechtcherine (2007)
10.14359/56545
Stereological Principles of Spatial Modeling Applied to Steel Fiber-Reinforced Concrete in Tension
Piet Stroeven (2009)
10.14359/1803
Distribution and Orientation of Fibers in Steel Fiber Reinforced Concrete
P. Soroushian (1990)
10.1016/J.CONBUILDMAT.2010.06.018
The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete
H. Mazaheripour (2011)
10.1016/J.JNNFM.2010.08.003
Simulation of the flow of fresh cement suspensions by a Lagrangian finite element approach
M. Cremonesi (2010)
10.1617/S11527-009-9562-3
Assessment of fibre orientation in ultra high performance fibre reinforced concrete and its effect on flexural strength
S. Barnett (2010)
10.14359/1852
Biaxial Strength and Deformational Behavior of Plain and Steel Fiber Concrete
L. Traina (1991)



This paper is referenced by
Semantic Scholar Logo Some data provided by SemanticScholar