Natural Polymers: Industry Techniques And Applications
Published 2016 · Engineering
Download PDFAnalyze on Scholarcy
This book introduces the most recent innovations in natural polymer applications in the food, construction, electronics, biomedical, pharmaceutical, and engineering industries. The authors provide perspectives from their respective range of industries covering classification, extraction, modification, and application of natural polymers from various sources in nature. They discuss the techniques used in analysis of natural polymers in various systems incorporating natural polymers as well as their intrinsic properties.
This paper references
Fermentation Technologies for the Optimization of Marine Microbial Exopolysaccharide Production
I. Finore (2014)
Preparation and characterization of chitosan/poly(vinyl alcohol) chemically crosslinked blends for biomedical applications
Ezequiel S. Costa-Júnior (2009)
Adsorption of polyelectrolytes and polyelectrolytes-surfactant mixtures at surfaces: a physico-chemical approach to a cosmetic challenge.
Sara Angélica Cortés Llamas (2015)
Nasal drug delivery--possibilities, problems and solutions.
L. Illum (2003)
Formation of biopolymer particles by thermal treatment of β-lactoglobulin–pectin complexes
O. G. Jones (2009)
Extraction and Purification of Chitosan from Chitin Isolated from Sea Prawn (Fenneropenaeus indicus)
Sneha Paul (2014)
Rheological characterisation of thermogelling chitosan/glycerol-phosphate solutions
A. Chenite (2001)
Normal histology of the nasal cavity and application of special techniques.
L. Uraih (1990)
Biodegradable polymers as biomaterials
L. Nair (2007)
Genipin-crosslinked chitosan hydrogels as biomedical and pharmaceutical aids
R. Muzzarelli (2009)
On the water swelling behaviour of poly(N-isopropylacrylamide) [P(N-iPAAm)], poly(methacrylic acid) [P(MAA)], their random copolymers and sequential interpenetrating polymer networks (IPNs)
E. Díez-Peña (2002)
Strategic insight into the global animal protein ingredients market Frost, Sullivan (2013a) European sensory and textural food additives market
Sullivan Frost (2012)
Copolymerization of polyether cyclic polyols with epoxy resins
G C Blytas (1995)
Chewing gum base. US, Patent No. US4415593A
M Glass (1983)
Emulsions stabilised by whey protein microgel particles: towards food-grade Pickering emulsions.
M. Destribats (2014)
Natural-Synthetic Hybrid Polymers Developed via Electrospinning: The Effect of PET in Chitosan/Starch System
A. Espindola-Gonzalez (2011)
Cross-linked hyaluronic acid hydrogel films: new biomaterials for drug delivery.
Y. Luo (2000)
Obesity management: what brings success?
Y. T. Lagerros (2013)
PROGRESS IN MOLECULAR AND ENVIRONMENTAL BIOENGINEERING FROM ANALYSIS AND MODELING TO TECHNOLOGY APPLICATIONS
A. Carpi (2011)
EVALUATION OF TANNIN BIOPOLYMER AS A COAGULANT AID FOR COAGULATION OF COLLOIDAL PARTICLES
M. Özacar (2003)
Biodegradable polymers and their layered silicate nanocomposites: In greening the 21st century materials world
S. Ray (2005)
Linear low‐density polyethylene/(soya powder) blends containing polyethylene‐g‐(maleic anhydride) as a compatibilizer
Sung Ting Sam (2009)
Isolation and characterization of pectin in sugarbeet pulp
L Phatak (1988)
Dissolving microneedles for transdermal drug administration prepared by stepwise controlled drawing of maltose.
K. Lee (2011)
Spray-dried powders of starch and crosslinked poly(acrylic acid) as carriers for nasal delivery of inactivated influenza vaccine.
D. Coucke (2009)
Effect of Small Change in Oil Phase Composition on Rheological and Textural Properties of w/o Emulsion
M. Lukić (2013)
Solid residues from Ruminococcus cellulose fermentations as components of wood adhesive formulations
P. Weimer (2003)
Active ingredients against human epidermal aging
M. Lorencini (2014)
Preparation of chitosan oligomers COS and their effect on the retrogradation of intermediate amylose rice starch
Y. Wu (2011)
Identification of novel saponins from edible seeds of Japanese horse chestnut (Aesculus turbinata Blume) after treatment with wooden ashes and their nutraceutical activity.
Hideto Kimura (2006)
A three-dimensional model for lignocellulose from gymnospermous wood
Jean-Loup Faulon (1994)
Swelling, diffusion, network parameters and adsorption properties of IPN hydrogel of chitosan and acrylic copolymer.
Bidyadhar Mandal (2014)
Physical stability, microstructure and rheology of sodium-caseinate-stabilized emulsions as influenced by protein concentration and non-adsorbing polysaccharides
Yichao Liang (2014)
Mathiowitz E (2013) Oral delivery of proteins by biodegradable naoparticles
Controlling lipid digestion by encapsulation of protein-stabilized lipid droplets within alginate–chitosan complex coacervates
Y. Li (2011)
The effect of interfacial microstructure on the lipid oxidation stability of oil-in-water emulsions.
M. Kargar (2011)
Patterned paper as a template for the delivery of reactants in the fabrication of planar materials.
Paul J. Bracher (2010)
Regioselective esterification and etherification of cellulose: a review.
S. Fox (2011)
Chapter 1 – Understanding Food Structures: The Colloid Science Approach
E. Dickinson (2014)
Synthesis and characterization of a novel polymeric hydrogel based on hydroxypropyl methyl cellulose grafted with polyacrylamide
R. Das (2012)
Structure and properties of glycerol-plasticized chitosan obtained by mechanical kneading
Virginia Epure (2011)
Rheological studies to objectify sensations occurring when cosmetic emulsions are applied to the skin
R. Brummer (1999)
Pharmaceutical significance of cellulose: A review
S. Kamel (2008)
Swelling and network parameters of crosslinked porous octadecyl acrylate copolymers as oil spill sorbers
Abdel-Azim A. Abdel-Azim (2009)
Kirk-Othmer Encyclopedia of Chemical Technology数据库介绍及实例
Rubber Polymers for Transdermal Drug Delivery Systems
Jirapornchai Suksaeree (2014)
World of chemistry
R. Young (2000)
Application of chitosan microspheres for nasal delivery of vaccines.
M. L. Kang (2009)
Functionalized microgel swelling: comparing theory and experiment.
T. Hoare (2007)
Microwave-assisted extraction of lignin from triticale straw: optimization and microwave effects.
Fanny Monteil-Rivera (2012)
Safety assessment of a novel ingredient for removable chewing gum.
Tim Farber (2010)
Pharmaceutical Applications of Natural Polymers
Atul Nayak (2016)
Proteins, polysaccharides, and their complexes used as stabilizers for emulsions: alternatives to synthetic surfactants in the pharmaceutical field?
Eléonore Bouyer (2012)
Vrinda Publications (P) Ltd, Delhi Kulkarni et al (2012) Natural polymers-a comprehensive review
M L Jhingan (2005)
Pediatric formulations: a roadmap (Chap. 15)
V F Patel (2014)
United States government-department of labor-Occupational Safety and Health Administration
Preparation and Evaluation of Gelatin/Sodium Carboxymethyl Cellulose Polyelectrolyte Complex Microparticles for Controlled Delivery of Isoniazid
N. Devi (2009)
Acute & Chronic Wounds: Current Management Concepts
R. Bryant (2011)
Chitosan as a Novel Edible Coating for Fresh Fruits
R. A. Shiekh (2013)
Aspects of milk-protein-stabilised emulsions
Harjinder Singh (2011)
Transdermal delivery of insulin using amidated pectin hydrogel patches
Mark Tufts (2010)
Uptake of Chitosan and Associated Insulin in Caco-2 Cell Monolayers: A Comparison Between Chitosan Molecules and Chitosan Nanoparticles
Zengshuan Ma (2004)
Building fibrous biomaterials from α‐helical and collagen‐like coiled‐coil peptides
D. N. Woolfson (2010)
Shrimp chitin as substrate for fungal chitin deacetylase
Nay Win (2001)
Molecular weight distributions and linkages in lignocellulosic materials derivatized from ionic liquid media.
Luca Zoia (2011)
A model of recycling behaviour, with evidence from Danish source separation programmes
John Thøgersen (1994)
Effects of hydrophobic modification of chitosan and Nafion on transport properties, ion-exchange capacities, and enzyme immobilization
Tamara L. Klotzbach (2006)
Chitin and Chitosan in Gel Network Systems
W. Argüelles-Monal (2002)
Biodegradable Cellulose-based Hydrogels: Design and Applications
A. Sannino (2009)
A NEWER APPROACH TO GREEN EARTH - SOLAR-INDUCED HYBRID BIOMASS FUEL CELL
Vanita Kumari Sapra (2014)
Properties of gelatins from skins of fish—black tilapia (Oreochromis mossambicus) and red tilapia (Oreochromis nilotica)
B. Jamilah (2002)
Factors Influencing the Freeze-Thaw Stability of Emulsion-Based Foods
Brian M. Degner (2014)
Chitin and chitosan: Properties and applications
M. Rinaudo (2006)
Studies on biodegradability, morphology and thermo-mechanical properties of LDPE/modified starch blends
I. M. Thakore (2001)
Use of lactic acid for extraction of fish skin gelatin
B. Giménez (2005)
Improved mechanical properties of chitosan fibers
Jonathan Z. Knaul (1999)
Petrochemical and pasting properties of cocoyam
A Veronica (2013)
Skin adhesives and skin adhesion. 1. Transdermal drug delivery systems.
S. Venkatraman (1998)
Development, optimization and in vitro evaluation of alginate mucoadhesive microspheres of carvedilol for nasal delivery
S. Patil (2009)
A review of topical therapy for skin infections with bacteria and yeast.
R. Mueller (2012)
Chitosan-coated liposomes for topical vaginal therapy: assuring localized drug effect.
May Wenche Jøraholmen (2014)
Emulsion stabilizing capacity of intact starch granules modified by heat treatment or octenyl succinic anhydride
Anna Timgren (2013)
Black-tea polyphenols suppress postprandial hypertriacylglycerolemia by suppressing lymphatic transport of dietary fat in rats.
M. Kobayashi (2009)
Molecular mechanism on functional food bioactives for anti-obesity
Ching-Shu Lai (2015)
A comprehensive review of advanced biopolymeric wound healing systems.
N. Mayet (2014)
Failure modes of drilling fluid filter cake
P. Cerasi (2001)
Formulation and characterization of an oily-based system for oral delivery of insulin.
A. Elsayed (2009)
Influence of excipients on spray-dried powders for inhalation
E Y Xu (2014)
Emulsions stabilised solely by colloidal particles
R. Aveyard (2003)
Extraction of chitin from chitosan from exoskeleton of shrimp for application in the pharmaceutical industry
Yateendra Shanmukha Puvvada (2012)
Laboratory Development and Field Testing of Succinoglycan as a Fluid-Loss-Control Fluid
Hon Chung Lau (1994)
WHO Expert Committee on Specifications for Pharmaceutical Preparations. Thirty-second report.
Molding Method, Thermal and Mechanical Properties of Jute/PLA Injection Molding
Yuqiu Yang (2012)
Biomimetic Synthesis of Gelatin Polypeptide-Assisted Noble-Metal Nanoparticles and Their Interaction Study
Ying Liu (2011)
The ALCELL process--a proven alternative to kraft pulping
E. K. Pye (1991)
Drug delivery systems and routes of administration of peptide and protein drugs
L. M. Sanders (2010)
Peptide- and Protein-Based Hydrogels
A. Jonker (2012)
I. Vroman (2009)
Europa summaries of EU legislation
Changes in the molecular composition of gelatin due to the manufacturing process and animal age, as shown by electrophoresis
Cgb Cole (1996)
Lignocellulosic/plastic composites. Spring, Newsletter
A Sanadi (1998)
Starch properties, modifications, and applications
J. Jane (1995)
Food Gels: Gelling Process and New Applications
S. Banerjee (2012)
Oral delivery of therapeutic protein/peptide for diabetes--future perspectives.
M. Rekha (2013)
A combined approach in characterization of an effective w/o hand cream: the influence of emollient on textural, sensorial and in vivo skin performance
M. Lukic (2012)
Method of forming adhesive patch for applying medication to the skin
D Rolf (2000)
Lost circulation material with rice fraction
B D Burts (1992)
The economics of a synthetic drilling fluid for exploration drilling in the UK sector of the North Sea
Microparticles of hydrogel type based on carboxymethylcellulose and gelatin for controlled release of water soluble drugs
G Tataru (2011)
A rapid and simple method to isolate pure alphacellulose
O Brendel (2000)
Optimizing coagulation and flocculation process for kaolinite suspension with chitosan
J. Li (2013)
Effects of acetate on absorption of solute and water from the pig colon.
M. Crump (1980)
Comparative analysis of cellulose preparation techniques for use with 13C, 14C, AND 18O isotopic measurements.
J. Gaudinski (2005)
Proximate amino acid, fatty acid and mineral composition of two Sudanese edible pentatomid insects
Abdalbasit Adam Mariod (2011)
Alginate based new materials.
K. Draget (1997)
EFFECTS OF XANTHAN GUM ON PHYSICOCHEMICAL PROPERTIES AND STABILITY OF CORN OIL IN WATER EMULSIONS STABILIZED BY POLYOXYETHYLENE (20) SORBITAN MONOOLEATE
V. Krstonošić (2009)
Transdermal Delivery of Chloroquine by Amidated Pectin Hydrogel Matrix Patch in the Rat
C. Musabayane (2003)
The characteristics of gelatin extracted from sturgeon (Acipenser baeri) skin using various pretreatments
Shuxian Hao (2009)
Crosslinked poly(vinyl alcohol) hydrogels for wound dressing applications: A review of remarkably blended polymers
E. Kamoun (2015)
Influences of process parameters on preparation of microparticle used as a carrier system for omega - 3 unsaturated fatty acid ethyl esters used in supplementary nutrition.
A. Lamprecht (2001)
Enzymatic hydrolysis of cellulose: An overview
L. P. Walker (1991)
Reliability and prediction of long-term performance of polymer-based materials
Witold Brostow (2009)
Soil Burial of Polyethylene-g-(Maleic Anhydride) Compatibilised LLDPE/Soya Powder Blends
S. T. Sam (2011)
A Glucose Biofuel Cell to Generate Electricity
Barbara Mecheri (2011)
Multiwall carbon nanotube scaffolds for tissue engineering purposes.
A. Abarrategi (2008)
Physicochemical properties and antioxidant activity of chitosan from the blowfly Chrysomya megacephala larvae.
C. Song (2013)
Natural and synthetic biomaterials for controlled drug delivery
Jang Kyoung Kim (2014)
Nasal drug delivery - recent developments and future prospects.
L. Illum (2012)
Swelling behavior of hyaluronic acid/polyallylamine hydrochloride multilayer films.
S. Burke (2005)
Stabilising emulsion-based colloidal structures with mixed food ingredients.
E. Dickinson (2013)
Milk proteins as vehicles for bioactives
Yoav D Livney (2010)
Dietary fibers affect viscosity of solutions and simulated human gastric and small intestinal digesta.
C. Dikeman (2006)
Synthesis and characterization of photocrosslinkable gelatin and silk fibroin interpenetrating polymer network hydrogels.
Wenqian Xiao (2011)
A review on application of flocculants in wastewater treatment
C. S. Lee (2014)
Towards temperature driven forward osmosis desalination using Semi-IPN hydrogels as reversible draw agents.
Yufeng Cai (2013)
Temperature Sensitive Polymers for Delivery of Macromolecular Drugs
S. Kim (1996)
Characterization of polyhydroxybutyrate-hydroxyvalerate (PHB-HV)/maize starch blend films
K. Reis (2008)
Effects of permeation-enhancing agents on drug metabolism in the skin.
Tomohiro Hikima (1993)
Preparation of microgel composite hydrogels by heating natural drying microgel composite polymers
F. X. Zhao (2014)
Poly(N-isopropylacrylamide-co-acrylamide) cross-linked thermoresponsive microspheres obtained from preformed polymers: Influence of the physico-chemical characteristics of drugs on their release profiles.
G. Fundueanu (2009)
Food formulation. In: Food engineering handbook
V Giannou (2014)
Materials in corporating cellulose fibres, methods for their production and products incorporating such materials
P D Gullett (1993)
Lost circulation treatment for oil field drilling operations
R D Sydansk (1990)
Rheological characterization of food thickeners marketed in Australia in various media for the management of dysphagia. III. Fruit juice as a dispersing medium
P A Sopade (2008)
Preparation, characterization and properties of binary and ternary blends with thermoplastic starch, poly(lactic acid) and poly(butylene adipate-co-terephthalate)
J. Ren (2009)
Rheological and textural characterization of cosmetic emulsions containing natural and synthetic polymers: relationships between both data
Laura Gilbert (2013)
Evaluation of Clinical Outcomes and Aesthetic Results after Autologous Fat Grafting for Contour Deformities of the Reconstructed Breast
C. de Blacam (2011)
Alginates from Common British Brown Marine Algae
W. A. Black (1954)
Microstructure and release characteristics of the minipellet, a collagen-based drug delivery system for controlled release of protein drugs.
M. Maeda (1999)
HYDROGELS IN DRUG DELIVERY: PROGRESS AND CHALLENGES
T. Hoare (2008)
Experimental evaluation of eco-friendly flocculants prepared from date palm rachis.
R. Khiari (2010)
Release characteristics of cisplatin chitosan microspheres and effect of containing chitin.
Y. Nishioka (1990)
Proteins as Agricultural Polymers for Packaging Production
B. Cuq (1998)
Biopolymer-based hydrogels as scaffolds for tissue engineering applications: a review.
S. Van Vlierberghe (2011)
Semi-interpenetrating polymer network microspheres of gelatin and sodium carboxymethyl cellulose for controlled release of ketorolac tromethamine
A. P. Rokhade (2006)
Wound healing dressings and drug delivery systems: a review.
J. Boateng (2008)
Dermal and transdermal delivery of an anti-psoriatic agent via ethanolic liposomes.
V. Dubey (2007)
Polymers in transdermal drug delivery systems
S. Kandavilli (2002)
Genipin-crosslinked casein hydrogels for controlled drug delivery.
Fei Song (2009)
Supercritical solvent impregnation of ophthalmic drugs on chitosan derivatives
M. E. Braga (2008)
The Application of Polymer Mud System in Drilling Engineering
Qi Luheng (2014)
Comparison of morphology and mechanical properties of PLGA bioscaffolds.
L. Leung (2008)
Biotechnological production and applications of pullulan
T. Leathers (2003)
Oral insulin delivery: the potential of thiolated chitosan-insulin tablets on non-diabetic rats.
A. Krauland (2004)
ed) Conditioning agents for hair and skin. Cosmetic science and technology series
B Gesslein (1999)
Influence of xanthan gum on oil-in-water characteristics stabilized by OSA starch
V Krstonosic (2015)
Hydrogel: Preparation, Characterization and Applications
S. Singh (2017)
Rheological investigations on the creaming of depletion-flocculated emulsions.
S. Aben (2012)
Fenugreek mucilage as a flocculating agent for sewage treatment
A. Mishra (2003)
Characterization, in vitro release and permeation studies of nicotine transdermal patches prepared from deproteinized natural rubber latex blends
Jirapornchai Suksaeree (2012)
Synthesis and Properties of Inulin Based Microgels
Nurettin Sahiner (2014)
Hydrogels for biomedical applications.
A. Hoffman (2002)
Do viscous polysaccharides slow absorption by inhibiting diffusion or convection?
C. Edwards (1988)
Barrier properties of heat treated starch Pickering emulsions.
Malin Sjöö (2015)
Physicochemical characterization and in vitro release studies of ascorbyl palmitate-loaded semi-solid nanostructured lipid carriers (NLC gels).
Veerawat Teeranachaideekul (2008)
Solution properties of gum exudates from Sterculia urens (Karaya gum)
D. Cerf (1990)
Pickering emulsions for food applications: background, trends, and challenges.
C. Berton-Carabin (2015)
Chemistry of gluten proteins.
H. Wieser (2007)
Preparation and Characterization of Gelatins from Two Sudanese Edible Insects
Current applications of foams formed from mixed surfactant-polymer solutions.
Andrei Sergeevich Bureiko (2015)
Intermolecular and surface forces : with applications to colloidal and biological systems
J. Israelachvili (1985)
Chitosan from Mucor rouxii: production and physico-chemical characterization
S. Chatterjee (2005)
Chitosan in nasal delivery systems for therapeutic drugs.
L. Casettari (2014)
Lecithin organogel: A unique micellar system for the delivery of bioactive agents in the treatment of skin aging
S. Raut (2012)
polymer scaffold in tissue engineering applications: a review
B Dhandayuthapani (2011)
Drilling mud composition and process for reducing the filtrate of metal hydroxide mixtures containing drilling mud compositions
J Plank (1993)
North America sensory and textural food additives market
Sullivan Frost (2013)
Method of controlling lost circulation in well drilling
D L Whitfill (1990)
Effect of molecular weight and degree of substitution of a sodium carboxymethyl cellulose binder on Li 4 Ti 5 O 12 anodic performance
B R Lee (2013)
Preparation of zolmitriptan-chitosan microparticles by spray drying for nasal delivery.
Amjad Alhalaweh (2009)
Microneedles from fish scale biopolymer
O. Olatunji (2014)
Effects of guar galactomannan on wheat bread microstructure and on the in vitro and in vivo digestibility of starch in bread
C. Brennan (1996)
Glucose oxidase: an ideal enzyme
R. Wilson (1992)
Alginate derivatization: a review of chemistry, properties and applications.
S. Pawar (2012)
Controlled Drug Release from Gelatin-Sodium Carboxymethylcellulose Interpenetrating Polymer Networks
G. Rathna (2003)
Enhancement of dissolution properties of griseofulvin from ground mixtures with chitin or chitosan.
Y. Sawayanagi (1982)
Biological activity of alginate and its effect on pancreatic lipase inhibition as a potential treatment for obesity
David Houghton (2015)
Transdermal drug delivery system (TDDS) adhesion as a critical safety, efficacy and quality attribute.
A. Wokovich (2006)
BP Statistical Review of World Energy
Judith Gurney (1985)
Hydrocolloids as emulsifiers and emulsion stabilizers
E. Dickinson (2009)
Preparation of multiple emulsions based on thermodynamic incompatibility of heat-denatured whey protein and pectin solutions
K. Hj (2006)
Rheological properties of selected hydrocolloids as a function of concentration and temperature
M. Marcotte (2001)
Isolation and characterization of nutrients and value-added products from snow crab (Chinoecetes opilio) and shrimp (Pandalus borealis) processing discards
F. Shahidi (1991)
Structuring Food Emulsions to Improve Nutrient Delivery During Digestion
Like Mao (2015)
Hydrogel sheets of chitosan, honey and gelatin as burn wound dressings
Tao Wang (2012)
Flocculant and chemical properties of a polysaccharide from Pullularia pullulans.
J. Zajic (1973)
Developments in plant breeding for improved nutritional quality of soya beans I. Protein and amino acid content.
E. J. Clarke (2000)
Bio-microfluidics: biomaterials and biomimetic designs.
P. Domachuk (2010)
Flocculation behaviour of model textile wastewater treated with a food grade polysaccharide.
A. Mishra (2005)
Technetium-99m-labeled nanofibrillar cellulose hydrogel for in vivo
P Laurén (2014)
Shampoo and Conditioner Science
R. Lochhead (2012)
Comparison of Protein Extraction Solutions for Rice Starch Isolation and Effects of Residual Protein Content on Starch Pasting Properties
J. Lee (1999)
Carbon nanotube reinforced Bombyx mori silk nanofibers by the electrospinning process.
Jonathan Ayutsede (2006)
Surfactant-free high internal phase emulsions stabilized by cellulose nanocrystals.
I. Capron (2013)
Review on Hydrogel-based pH Sensors and Microsensors
A. Richter (2008)
Surface modification of spray dried food and emulsion powders with surface-active proteins: a review.
Mithila Jayasundera (2009)
Polymer tribology in safety medical devices: Retractable syringes
W. Brostow (2007)
Review of techniques to manufacture micro-hydrogel particles for the food industry and their applications
H. M. Shewan (2013)
Alginate hydrogels as biomaterials.
Alexander Augst (2006)
Feasibility of xanthan gum–sodium alginate as a transdermal drug delivery system for domperidone
N. Rajesh (2009)
Rheological Properties of Fish Gelatins
M. T. Gudmundsson (2002)
Successful Use of a Physiologically Acceptable Artificial Skin in the Treatment of Extensive Burn Injury
J. Burke (1981)
Characterization of ibuprofen loaded solid lipid nanoparticles dispersed in semi-solid Carbopol gels
A. R. Silva (2007)
The emulsification properties of octenyl- and dodecenyl- succinylated inulins
Susumu Kokubun (2015)
Structural and physical properties of gelatin extracted from different marine species: A comparative study
M. Gómez-Guillén (2002)
Treatment of ink-containing wastewater by coagulation / flocculation using biopolymers
J. Roussy (2007)
Mathematical models of transdermal and topical drug delivery
東條 角治 (2005)
Starch characterization of nixtamalized corn flour
M. Gómez (1991)
Hyaluronic acid hydrogel particles with tunable charges as potential drug delivery devices
S. Ekici (2011)
Renewable energy resources: Current status, future prospects and their enabling technology
O. Ellabban (2014)
Determination of moisture in intact gelatin capsules by near-infrared spectroscopy
R G Buice (1995)
Chitosan production routes and their role in determining the structure and properties of the product
Gaf Roberts (1997)
Development of a new crosslinked hec (hydroxyethyl cellulose) fluid loss control pill for highly-overbalanced, high-permeability and/or high temperature formations
F F Chang (1998)
Natural polymers to 2016-demand and sales forecasts, market share, market size, market leaders
Correlating sensory perception to the rheological parameters of emulsions: a predictive model for the future product development?
A M Dimuzio (2005)
Biotic elicitor enhanced production of psoralen in suspension cultures of Psoralea corylifolia L.
S. A. Ahmed (2014)
Prevention and Treatment of Life-Threatening Pediatric Emergencies Requiring Anesthesia
R. Holzman (1998)
The potential use of mixed films of pectin, chitosan and HPMC for bimodal drug release.
G. S. Macleod (1999)
Extracting wood lignin without dissolving or degrading cellulose: investigations on the use of food additive-derived ionic liquids
André Pinkert (2011)
Microneedle patches for vaccine delivery
Hyemee Suh (2014)
Properties of sisal-CNSL composites
E. T. N. Bisanda (1992)
Injectable, thermo-reversible and complex coacervate combination gels for protein drug delivery.
Kwang-Mi Jin (2008)
Lecithin organogel as matrix for transdermal transport of drugs.
H. Willimann (1992)
Energy intake and appetite are related to antral area in healthy young and older subjects.
K. Sturm (2004)
Properties of Lintnerized Starch Granules from Rices Differing in Amylose Content and Gelatinization Temperature
C. C. Maniñgat (1979)
Proteins in whey: chemical, physical, and functional properties.
J. Kinsella (1989)
Photoresponsive hydrogels for biomedical applications.
Itsuro Tomatsu (2011)
Preparation of water soluble chitosan by hydrolysis using hydrogen peroxide.
Zhenqiang Xia (2013)
Hydrogel-nanoparticle composites for optically modulated cancer therapeutic delivery.
L. Strong (2014)
NATURAL BIODEGRADABLE POLYMERS AS MATRICES INTRANSDERMAL DRUG DELIVERY
Kiran Sharma (2011)
Cellulose-based hydrogels: Present status and application prospects
Chunyu Chang (2011)
Trimethylated chitosans as non-viral gene delivery vectors: cytotoxicity and transfection efficiency.
T. Kean (2005)
Development and characterization of a lignin–phenol–formaldehyde wood adhesive using coffee bean shell
M. A. Khan (2005)
Modulating pancreatic lipase activity with galactolipids: effects of emulsion interfacial composition.
B. Chu (2009)
A review on the strategies for oral delivery of proteins and peptides and their clinical perspectives
Abdul Muheem (2016)
A model of flocculation
W. Brostow (2007)
Preparation of genipincrosslinked chitosan scaffolds using supercritical carbon dioxide (sc. CO 2 )
K Rinki (2008)
Handbook of adhesive technology (Chap. 15)
Mgd Baumann (1994)
Stable cmc (carboxymethyl cellulose) slurry. WO Patent
A O Lundan (1993)
Fluid systems for controlling fluid losses during hydrocarbon recovery operations
M Johnson (1996)
New flat-rheology synthetic based mud for improved deep-water drilling. Paper SPE 90987 presented at the SPE annual technical conference and exhibition
E Van Oort (2004)
Oxidative stability of Echium plantagineum seed oil bodies
D. Gray (2010)
Stretching properties of xanthan, carob, modified guar and celluloses in cosmetic emulsions.
L. Gilbert (2013)
Modified Gellan Gum hydrogels with tunable physical and mechanical properties.
Daniela F. Coutinho (2010)
Stretching properties of xanthan and hydroxypropyl guar in aqueous solutions and in cosmetic emulsions.
Majid Jamshidian (2014)
Hydrophobically modified xanthan: an amphiphilic but not associative polymer.
Audrey N. Roy (2014)
Applications of Alginates in Food
I. Brownlee (2009)
Coagulation and flocculation of dye-containing solutions using a biopolymer (Chitosan)
E. Guibal (2007)
Natural Polymers and their Application in Drug Delivery and Biomedical Field
Basu Sk (2011)
Production of biomass, polysaccharides, and ganoderic acid using non-conventional carbon sources under submerged culture of the Lingzhi or Reishi medicinal mushroom, Ganoderma lucidum (W.Curt.:Fr.)P. Karst. (higher Basidiomycetes).
Paola Zapata (2012)
Evaluating tactile properties of skincare products : a descriptive analysis technique
G. Civille (1991)
Targeted Lung Delivery of Nasally Administered Aerosols
Geng Tian (2014)
Injection molded thermoplastic starch/natural rubber/clay nanocomposites: Morphology and mechanical properties
M. Mondragón (2009)
Synthesis and properties of canola protein-based superabsorbent hydrogels
Weida Shi (2014)
Effects of annealing on mixture-cast membranes of Nafion® and quaternary ammonium bromide salts
T. Thomas (2003)
Optimization of Extraction Conditions for Pollock Skin Gelatin
P. Hou (2006)
Hyaluronic acid hydrogels for biomedical applications.
J. Burdick (2011)
Rheology of Emulsions
L. Phipps (1964)
Bioplastic development increases with new applications
D De Guzman (2010)
Natural polymers market for medical, food and beverage and oilfield applications-U.S. industry analysis, size, share, growth, trends and forecast
Transparency Market Research (2012)
Electricity from Biomass. Financial Times Business Ltd
B Price (1998)
Sulfonate-containing polymer/polyanionic cellulose combination for high temperature/high pressure filtration control in water base drilling fluids
J Hen (1991)
Role of thickeners in final performance of reactive prints
M D Teli (1986)
Chitosans for enhanced delivery of therapeutic peptides across intestinal epithelia: in vitro evaluation in Caco-2 cell monolayers
A. Kotzé (1997)
Preparation of monodisperse chitosan microcapsules with hollow structures using the SPG membrane emulsification technique.
Kazuki Akamatsu (2010)
Gelatin from cod skins as affected by chemical treatments
M. T. Gudmundsson (1997)
Production and characteristics of protein hydrolysates from capelin (Mallotus villosus)
F. Shahidi (1995)
Permeation enhancers compatible with transdermal drug delivery systems: part II: system design considerations.
W. Pfister (1990)
Gokhan Boran (2010)
A Novel Nano/Micro-Fibrous Scaffold by Melt-Spinning Method for Bone Tissue Engineering
Liguo Cui (2015)
Bioabsorbable Polymer Science for the Practicing Surgeon
W. S. Pietrzak (1997)
Applications of Chitin and Its Derivatives in Biological Medicine
B. K. Park (2010)
Food Polysaccharides and Their Applications
A. M. Stephen (2006)
Manufacture of chitosan microbeads using centrifugally driven flow of gel-forming solutions through a polymeric micronozzle.
D. Mark (2009)
Microbial transglutaminase crosslinks β-casein and β-lactoglobulin to heterologous oligomers under high pressure
S. Lauber (2003)
Technology, chemistry, and nutritional value of alkaline-cooked corn products
S. Serna-Saldívar (1990)
Drug Delivery Technologies: The Way Forward in the New Decade
E. M. D. Valle (2009)
Requirements on bacterial polyesters as future substitute for conventional plastics for consumer goods
U. Hänggi (1995)
The role of intact oleosin for stabilization and function of oleosomes.
Sania Maurer (2013)
The Use of Natural Polymers in Tissue Engineering: A Focus on Electrospun Extracellular Matrix Analogues
S. Sell (2010)
Preparation and characterization of chitosan/poly(vinyl alcohol) blend fibers
H. Zheng (2001)
Selective matrix (hyaluronan) interaction with CD44 and RhoGTPase signaling promotes keratinocyte functions and overcomes age-related epidermal dysfunction.
L. Bourguignon (2013)
Solution properties of chitin in alkali.
Aslak Einbu (2004)
24-Soluble soybean polysaccharide
H Maeda (2009)
G Stainsby (1987)
Chitin recovery using biological methods
W Arbia (2013)
Renewable Energy Policy Network for the 21th century
Chemistry of lignin-based materials
H. Chung (2013)
Controlled drug release from the aggregation-disaggregation behavior of pH-responsive microgels.
Yongfeng Gao (2014)
Minimising Down Hole Mud Losses
J. C. Rojas (1998)
Formulation and In vitro Evaluation of Fluconazole Topical Gels
A. Mekkawy (2013)
A new source of natural adhesive: Acacia mangium bark extracts co-polymerized with phenol-formaldehyde (PF) for bonding Mempisang (Annonaceae spp.) veneers
Y. B. Hoong (2011)
Composite alginate and gelatin based bio-polymeric wafers containing silver sulfadiazine for wound healing.
J. Boateng (2015)
Sustained delivery of latanoprost by thermosensitive chitosan-gelatin-based hydrogel for controlling ocular hypertension.
Yung-Hsin Cheng (2014)
Over-the-counter anti-ageing topical agents and their ability to protect and repair photoaged skin.
Eleanor J Bradley (2015)
Hydrogels in a historical perspective: from simple networks to smart materials.
Sytze J Buwalda (2014)
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
D. K. Gilding (1979)
Caecal and faecal short-chain fatty acids and stool output in rats fed on diets containing non-starch polysaccharides.
C. Edwards (1995)
Polymer Hydrogels: A Review
Waham Ashaier Laftah (2011)
On hen egg fractionation: applications of liquid chromatography to the isolation and the purification of hen egg white and egg yolk proteins
Abalo C. Awade (1996)
Preparing ballistic gelatine--review and proposal for a standard method.
Jorma Jussila (2004)
Influence of formamide and water on the properties of thermoplastic starch/poly(lactic acid) blends
N. Wang (2008)
Stimulatory effect of short-chain fatty acids on epithelial cell proliferation in the rat intestine: a possible explanation for trophic effects of fermentable fibre, gut microbes and luminal trophic factors.
T. Sakata (1987)
Therapeutic applications of hydrogels in oral drug delivery
L. Sharpe (2014)
Gelled emulsion particles for the controlled release of lipophilic volatiles during eating.
M. Malone (2003)
Food, physiology and drug delivery.
F. J. O. Varum (2013)
In: Jain KK (ed) Drug delivery systems-an overview
K K Jain (2008)
Commercial applications of alginates
E Onsoyen (1996)
Polymer compounds of the glycuronic acid, method of preparation and utilization particularly as gelifying, thickening, hydrating, stabilizing, chelating or flocculating means
J Courtois-Sambourg (1993)
Modeling of drug release from swellable polymers.
C. Brazel (2000)
L-Arginine grafted alginate hydrogel beads: A novel pH-sensitive system for specific protein delivery
M. Eldin (2015)
Chitosan/arginine-chitosan polymer blends for assembly of nanofibrous membranes for wound regeneration.
B. Antunes (2015)
State of the Art in Biosensors - General Aspects
M. I. Rocha-Gaso (2013)
Internal structure and colloidal behaviour of covalent whey protein microgels obtained by heat treatment
C. Schmitt (2010)
Crystallization of β‐estradiol in an acrylic transdermal drug delivery system
N. Variankaval (1999)
Formation, stability and properties of multilayer emulsions for application in the food industry.
Demet Guzey (2006)
A focus on gums
J. D. Dziezak (1991)
Application of Chitosan for the Removal of Metals From Wastewaters by Adsorption—Mechanisms and Models Review
C. Gérente (2007)
Flow and injection characteristics of pharmaceutical parenteral formulations using a micro-capillary rheometer.
A. Allahham (2004)
Enzyme-catalyzed in situ forming gelatin hydrogels as bioactive wound dressings: effects of fibroblast delivery on wound healing efficacy.
Yunki Lee (2014)
New materials and systems for drug delivery and targeting
P. York (1996)
TERMINOLOGY DEVELOPMENT AND PANEL TRAINING FOR SENSORY EVALUATION OF SKIN CARE PRODUCTS INCLUDING AQUA CREAM
In-suk Lee (2005)
Comparative effects of cobalt carboxylates on the thermo-oxidative degradation of LDPE films
P. Roy (2007)
Coagulation–flocculation treatment of municipal wastewater based on anionized nanocelluloses
Terhi Suopajärvi (2013)
Composition and Properties of Drilling and Completion Fluids
H.C.H. Darley (1988)
Delivery of functional polyelectrolytes from complexes induced by salt addition: impact of the initial binding strength.
Céline Rondon (2014)
Cationic polymers and their therapeutic potential.
S. K. Samal (2012)
Chemical modification of starch.
P. Tomasik (2004)
pH responsive poly amino-acid hydrogels formed via silk sericin templating.
Nicholas E. Kurland (2014)
Improvement of intestinal absorption of insulin and water-soluble macromolecular compounds by chitosan oligomers in rats.
Y. Gao (2008)
Petroleum engineer's guide to oil field chemicals and fluids
J K Fink (2003)
Method for inhibiting the initiation and propagation of formation fractures while drilling
G F Fuh (1993)
Experience with high temperature resistant water based drilling fluids (erfahrungen beim einsatz hochtemperatur-stabiler wasserbasischer bohrsp¨ulung)
K Waehner (1990)
Plasmid DNA hydrogels for biomedical applications.
Diana Costa (2014)
Facile Preparation of Water-Soluble N-Acetylated Chitosan and Molecular Weight Dependence of Its Water-Solubility
N. Kubota (1997)
Impact of Polymers on Texture Properties of Cosmetic Emulsions: A Methodological Approach
Laura Gilbert (2012)
Texture Analysis to Quantify Skin Care Product Efficacy
Janusz Jachowicz (2008)
Effect of montmorillonite on the swelling behavior and drug-release behavior of nanocomposite hydrogels
W. Lee (2003)
Preparation and characterization of thermoplastic starch/zein blends
E. Corradini (2007)
Rheological characterization of polysaccharide-surfactant matrices for cosmetic O/W emulsions.
D. Bais (2005)
Catalytic dehydration of bioethanol to ethylene over TiO2/γ-Al2O3 catalysts in microchannel reactors
G. Chen (2007)
Spherical phospholipid polymer hydrogels for cell encapsulation prepared with a flow-focusing microfluidic channel device.
T. Aikawa (2012)
Directed self-assembly of polypeptide-engineered physical microgels for building porous cell-laden hydrogels.
M. Yao (2014)
Modified chitosan hydrogels as drug delivery and tissue engineering systems: present status and applications
T. Giri (2012)
Biodegradable polymeric nanoparticles as drug delivery devices.
K. Soppimath (2001)
Jmi Wilkerson (1995)
Applications for sustainable cellulose derivatives in personal care
R Asad (2011)
Well fluid additive, well fluid made therefrom, method of treating a well fluid, method of circulating a well fluid
B D Burts (2001)
Encapsulated lime as a lost circulation additive for aqueous drilling fluids
C O Walker (1986)
Advances in cellulose eater performance and applications
J E Kevin (2001)
Kinetics and thermodynamics of drug permeation through silicone elastomers: testosterone derivatives and structure-permeability relationships
Y Sun (1986)
Chitosan-containing well drilling and servicing fluids
R F House (2001)
Laboratory study of lost circulation materials for use in both oil-base and water-base drilling muds. IADC/SPE 14723, IADC/SPE drilling conference
Raa Muzzarelli (1977)
Hydrogel swelling as a trigger to release biodegradable polymer microneedles in skin.
M. Kim (2012)
Collagen as a vehicle for drug delivery. Preliminary report.
A. Rubin (1973)
Ocular Drug Delivery
B. Gilger (2016)
Treatment of paper pulp and paper mill wastewater by coagulation–flocculation followed by heterogeneous photocatalysis
A. Rodrigues (2008)
Photopolymerizable hydrogels for tissue engineering applications.
K. Nguyen (2002)
Drug delivery strategies in the therapy of inflammatory bowel disease.
Christian Lautenschläger (2014)
Microspheres as nasal drug delivery systems.
TRANSDERMAL DELIVERY A PRECLINICAL AND CLINICAL PERSPECTIVE OF DRUGS DELIVERED VIA PATCHES
Seema Arkvanshi (2014)
Effect of intermolecular and intramolecular forces on hydrodynamic diameters of poly(N‐isopropylacrylamide) copolymers in aqueous solutions
Lei Yang (2013)
Eco-economical polyurethane wood adhesives from cellulosic waste: Synthesis, characterization and adhesion study
D. Mishra (2010)
Novel tamarind seed polysaccharide-alginate mucoadhesive microspheres for oral gliclazide delivery: in vitro–in vivo evaluation
Dilipkumar Pal (2012)
Effect of alginate supplementation on weight loss in obese subjects completing a 12-wk energy-restricted diet: a randomized controlled trial.
M. Georg Jensen (2012)
Ionotropic Gelation: A Promising Cross Linking Technique for Hydrogels.
S. Ahirrao (2014)
Chemical characterization of medium-chain-length polyhydroxyalkanoates (PHAs) recovered by enzymatic treatment and ultrafiltration
I. Ping (2007)
Liposomal carfilzomib nanoparticles effectively target multiple myeloma cells and demonstrate enhanced efficacy in vivo.
J. Ashley (2014)
Review and update of casein chemistry.
H. Swaisgood (1993)
Encapsulated oil absorbent polymers as lost circulation additives for oil based drilling fluids
H J Delhommer (1987)
Review: organic polyelectrolytes in water treatment
B Bolto (2007)
Method of drilling with fluid including nut cork and drilling fluid additive
R A Rose (1996)
Oil-in-water emulsions drilling fluid, US Patent 2
J Rodolfo (1955)
Tribology of polymer and polymerbased composites
W Brostow (2010)
Gel properties of collagens from skins of cod (Gadus morhua) and hake (Merluccius merluccius) and their modification by the coenhancers magnesium sulphate, glycerol and transglutaminase
M. Fernández-Dı́az (2001)
Melt spinning of synthetic polymeric filaments
Amit H Rawal (2014)
Thermosensitive hydrogels of poly(methyl vinyl ether-co-maleic anhydride) - Pluronic(®) F127 copolymers for controlled protein release.
Esther Moreno (2014)
Colloidal microgels in drug delivery applications.
S. Vinogradov (2006)
Lipid Oxidation in Oil‐in‐Water Emulsions: Involvement of the Interfacial Layer
C. Berton-Carabin (2014)
Calcium orthophosphate-based biocomposites and hybrid biomaterials
S. Dorozhkin (2009)
Effects of interpenetration of thermo-sensitive gels by crosslinking of chitosan on nasal delivery of insulin: In vitro characterization and in vivo study
Tze Wen Chung (2010)
Formulation and evaluation of antipsoriatic gel using natural excipients
Raghupatruni Jhansi Laxmi (2013)
Osteoblast function on synthetic biodegradable polymers.
S. L. Ishaug (1994)
A critique of some methods proposed for evaluating the emulsifying capacity and emusion stabilizing performance of vegetable proteins
P. Sherman (1995)
Smart Polymers: Applications in Biotechnology and Biomedicine
João F Mano (2009)
Keeping up with the Biopharmaceutical Market
Hans Ole Klingenberg (2013)
An Overview of Surfactant Applications in Drilling Fluids for the Petroleum Industry
L. Quintero (2002)
Principles of Polymer Science and Technology in Cosmetics and Personal Care
E. Goddard (1999)
Specific and non-specific bioadhesive particulate systems for oral delivery to the gastrointestinal tract.
Effect of two doses of a mixture of soluble fibres on body weight and metabolic variables in overweight or obese patients: a randomised trial.
J. Salas-Salvadó (2008)
Advances of bio-ethylene
H. Yi (2008)
Effect of lime on gelatinization of corn flour and starch
C. Bryant (1997)
Diversity of bacterial polyhydroxyalkanoic acids
A. Steinbuechel (1995)
Fenugreek mucilage for solid removal from tannery effluent
A. Mishra (2004)
WOOD AND WOOD DERIVED MATERIALS
W. Brostow (2010)
Chemical composition, digestibility and emulsification properties of octenyl succinic esters of various starches.
S. Simsek (2015)
Hydrogels: from controlled release to pH-responsive drug delivery.
P. Gupta (2002)
Expand classical drug administration ways by emerging routes using dendrimer drug delivery systems: a concise overview.
S. Mignani (2013)
A study of calcium carbonate/multiwalled-carbon nanotubes/chitosan composite coatings on Ti–6Al–4V alloy for orthopedic implants
Rasha Ali Mohammed Ahmed (2013)
Polyhydroxyalkanoates: biodegradable polymers with a range of applications
Sheryl E. Philip (2007)
Lignocellulosic biomass fractionation: I - solvent extraction in a novel reactor
José Osvaldo Beserra Carioca (2005)
Coacervate formation of α-lactalbumin―chitosan and β-lactoglobulin―chitosan complexes
An-Cheol Lee (2009)
Reduced-fat white fresh cheese-like products obtained from W1/O/W2 multiple emulsions: Viscoelastic and high-resolution image analyses
C. Lobato-Calleros (2006)
Is the oral route possible for peptide and protein drug delivery?
M. Morishita (2006)
Dietary fibres, fibre analogues, and glucose tolerance: importance of viscosity.
D. Jenkins (1978)
Preparation of natural rubber (NR) latex/low density polyethylene (LDPE) blown film and its properties
Supak Mahapram (2011)
Hydrocolloids as thickening and gelling agents in food: a critical review
Dipjyoti Saha (2010)
Transdermal Delivery Systems: A Medical Rationale
Gary W. Cleary (1993)
Superabsorbent hydrogels based on cellulose for smart swelling and controllable delivery
Chunyu Chang (2010)
Drug loading of polymer implants by supercritical CO2 assisted impregnation: A review.
M. Champeau (2015)
Effect of butyrate enemas on the colonic mucosa in distal ulcerative colitis.
W. Scheppach (1992)
Vaginitis: Diagnosis and Treatment.
Heather L. Paladine (2018)
Protection of Lactobacillus acidophilus from the low pH of a model gastric juice by incorporation in a W/O/W emulsion
M. Shima (2006)
Role of viscous guar gums in lowering the glycemic response after a solid meal.
C. Leclère (1994)
FLUID COMPRISING CELLULOSE NANOFIBRILS AND ITS USE FOR OL MINING
Corn starch changes during tortilla and tortilla chip processing
M. Gómez (1992)
Well working compositions, method of decreasing the seepage loss from such compositions, and additive therefor
R F House (1991)
Global bio-based plastic market
Sullivan Frost (2009)
Method for treating an aqueous medium with chitosan and derivatives of chitin to remove an impurity
Q P Peniston (1970)
Dry com masa flours for tortilla and snack processing
M H Gomez (1987)
Preparation and characterization of poly (lactic acid)-g-maleic anhydride + starch belnds
V H Orozco (2009)
Semi-solid formulations (Chap. 12)
I C Jacobs (2014)
Olive pulp additive in drilling operations
Jjs Duhon (1998)
Structure and properties of biodegradable wheat gluten/attapulgitenanocomposite sheets
Q Yuan (2010)
The gastrointestinal tract: neuroendocrine regulation of satiety and food intake
J Maljaars (2007)
Review article: alginate‐raft formulations in the treatment of heartburn and acid reflux
Bulk self-aggregation drives foam stabilization properties of whey protein microgels
C. Schmitt (2014)
Exopolysaccharides produced by marine bacteria and their applications as glycosaminoglycan-like molecules
C. Delbarre-Ladrat (2014)
Temperature-sensitive polymer-nanoshell composites for photothermally modulated drug delivery.
S. Sershen (2000)
The thermosensitivity of pH/thermoresponsive microspheres activated by the electrostatic interaction of pH-sensitive units with a bioactive compound.
G. Fundueanu (2013)
Advances in Natural Polymers as Pharmaceutical Excipients
I. Ogaji (2012)
The key role alginates play in health
P. Dettmar (2011)
Effects of Small and Large Molecule Emulsifiers on the Characteristics of β-Carotene Nanoemulsions Prepared by High Pressure Homogenization
Like Mao (2009)
Improving the outcomes of biopharmaceutical delivery via the subcutaneous route by understanding the chemical, physical and physiological properties of the subcutaneous injection site.
Hanne M Kinnunen (2014)
Breakthrough discoveries in drug delivery technologies: the next 30 years.
D. Brambilla (2014)
Polymers in Personal Care
Eric S. Abrutyn (2010)
Investigating the structure-property relationship of bacterial PHA block copolymers.
C. W. Mcchalicher (2007)
Microencapsulating properties of trehalose and of its blends with sucrose and lactose
M. Cerdeira (2006)
Enhancing and sustaining the topical ocular delivery of fluconazole using chitosan solution and poloxamer/chitosan in situ forming gel.
T. Gratieri (2011)
SPRAY DRYING OF CONCENTRATED FRUIT JUICES
B. Bhandari (1993)
Functional enhancement of chitosan and nanoparticles in cell culture, tissue engineering, and pharmaceutical applications
W. Gao (2012)
Value-adding to cellulosic ethanol: lignin polymers.
William O.S. Doherty (2011)
Transdermal drug delivery: 30+ years of war and still fighting!
S. Wiedersberg (2014)
Food applications of biopolymer—theory and practice
I. Chronakis (1995)
Effectiveness of tannins obtained from valonia as a coagulant aid for dewatering of sludge
M. Özacar (2000)
Recent developments in our understanding of amylopectin structure
D. Manners (1989)
Percutaneous delivery of econazole using microemulsion as vehicle: formulation, evaluation and vesicle-skin interaction.
Shumin Ge (2014)
Freezing and freeze-drying of Pickering emulsions stabilized by starch granules
Ali Marefati (2013)
Trends in the treatment of dermatophytosis.
A. D. Palacio (2000)
Functional properties of whey proteins microparticulated at low pH.
M. Dissanayake (2012)
6 – Micro- and nano-emulsions for delivery of functional food ingredients
N. Garti (2008)
Osmotic pressure versus swelling pressure: comment on "bifunctional polymer hydrogel layers as forward osmosis draw agents for continuous production of fresh water using solar energy".
Shuaifei Zhao (2014)
Structure of alginate gels: interaction of diuronate units with divalent cations from density functional calculations.
Pierre Agulhon (2012)
RNA interference advances to early-stage clinical trials.
V. Brower (2010)
Novel wear resistant and low toxicity dental obturation materials
M. Estévez (2007)
Biodegradable Soy-Based Plastics: Opportunities and Challenges
S. N. Swain (2004)
15-18 Mar Gotlieb KF, Bleeker IP, van Doren HA, Heeres A (1996) 2-nitroalkyl ethers of native or modified starch, method for the preparation thereof, and ethers derived therefrom
J F Gockel (1987)
Method and composition for controlling fluid loss in high permeability hydrocarbon bearing formations
F F Chang (1999)
Fabrication of chitosan/silk fibroin composite for wound-dressing applications
Z X Cai (2010)
Bioplastics: technologies and global markets
S Doug (2010)
Cast thin film biosensor design based on a Nafion backbone, a multiwalled carbon nanotube conduit, and a glucose oxidase function.
Yu-chen Tsai (2005)
Enhanced adsorption of synthetic dyes from aqueous solution by a semi-interpenetrating network hydrogel based on starch
Ruma Bhattacharyya (2014)
Polymer/ Surfactant Interaction in Applied Systems
E. Goddard (1999)
In situ gelling pH- and temperature-sensitive biodegradable block copolymer hydrogels for drug delivery.
Narendra K. Singh (2014)
Tribological properties of polypropylene composites with carbon nanotubes and sepiolite.
Víctor H. Orozco (2014)
Antitumor drug Paclitaxel-loaded pH-sensitive nanoparticles targeting tumor extracellular pH
F. Li (2009)
Intestinal absorption enhancement via the paracellular route by fatty acids, chitosans and others: a target for drug delivery.
M. J. Cano-Cebrián (2005)
The effect of addition of modified guar gum to a low-energy semisolid meal on appetite and body weight loss
Emr Kovacs (2001)
Controlling textures in soups, sauces and dressings.
P. Sheldrake (2003)
Ligand-targeted liposome design: challenges and fundamental considerations.
Gavin T Noble (2014)
On the mechanism of gelation of helix-forming biopolymers
C. Viebke (1994)
Gamma scintigraphic evaluation of the fate of microcrystalline chitosan granules in human stomach.
M. Säkkinen (2004)
Surface compaction versus stretching in Pickering emulsions stabilised by microgels
Véronique Schmitt (2013)
Pentacyclic Triterpene Distribution in Various Plants – Rich Sources for a New Group of Multi-Potent Plant Extracts
S. Jaeger (2009)
Dissolution and regeneration of cellulose in NaOH/thiourea aqueous solution
L. Zhang (2002)
Compatibilization in bio-based and biodegradable polymer blends
Balázs Imre (2013)
Hydrolysis of lignocellulosic materials for ethanol production: a review.
Y. Sun (2002)
Rheology of emulsions : a review
H. Barnes (1994)
Glucose oxidase anode for biofuel cell based on direct electron transfer
D. Ivnitski (2006)
An Analysis and the Control of Lost Circulation
G. Howard (1951)
Functional and bioactive properties of collagen and gelatin from alternative sources: A review
M. C. Gómez-Guillén (2011)
Extended lifetime biofuel cells.
Michael J. Moehlenbrock (2008)
Processing optimization and functional properties of gelatin from shark (Isurus oxyrinchus) cartilage
Suengmok Cho (2004)
From high doses of oral rivastigmine to transdermal rivastigmine patches: user experience and satisfaction among caregivers of patients with mild to moderate Alzheimer disease.
Rudigoz René (2014)
Bioadhesive PAA-PEG-PAA triblock copolymer hydrogels for drug delivery in oral cavity
Minh Khanh Nguyen (2010)
Alginate-poloxamer microparticles for controlled drug delivery to mucosal tissue.
K. Moebus (2009)
Formulation strategy and use of excipients in pulmonary drug delivery.
G. Pilcer (2010)
Chitosan–Hyaluronic acid Hydrogel Coated Poly (caprolactone) Multiscale Bilayer Scaffold for Ligament Regeneration
S. Deepthi (2015)
Adhesive patch for applying medication to the skin and method
D Rolf (2000)
Stable cmc (carboxymethyl cellulose) slurry. US Patent
A O Lundan (1996)
Natural polymers: an overview
S Thomas (2012)
Production d'acide β-oxybutyrique par certaines bacteries du groupe du Bacillus subtilis
M Lemoigne (1923)
Renewable Energy Policy Network for the 21th century (2012) Renewables global status report 2012
Predicting sensory texture properties of cosmetic emulsions by physical measurements
L. Gilbert (2013)
New natural injection-moldable composite material from sunflower oil cake.
A. Rouilly (2006)
Enzyme-based biofuel cells.
S. Minteer (2007)
Chitosan for coagulation/flocculation processes. An eco-friendly approach.
F. Renault (2009)
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
M. Jamshidian (2010)
New functional biomaterials for medicine and healthcare
E. Ivanova (2013)
Characteristic physical properties and structural fragments of marketed oral drugs.
M. Vieth (2004)
Fabrication of encapsulated oil powders from starch granule stabilized W/O/W Pickering emulsions by freeze-drying
A. Marefati (2015)
Identification and characterization of molecular species of collagen in ordinary muscle and skin of the Japanese flounder Paralichthys olivaceus
Maki Nishimoto (2005)
Biomaterials from ultrasonication-induced silk fibroin-hyaluronic acid hydrogels.
Xiao Hu (2010)
The effect of nitric acid extraction variables on orange pectin
G. Aravantinos-Zafiris (1992)
The use of mucoadhesive polymers in vaginal delivery.
C. Valenta (2005)
The development of microgels/nanogels for drug delivery applications
J. Oh (2008)
Novel pH-sensitive microgels prepared using salt bridge.
X. Yang (2010)
Fat encapsulation in spray-dried food powders
P. Fäldt (1995)
Chitin and chitosan polymers: Chemistry, solubility and fiber formation
C. K. S. Pillai (2009)
Uptake and Transport of PEG-Graft-Trimethyl-Chitosan Copolymer–Insulin Nanocomplexes by Epithelial Cells
S. Mao (2005)
The Development and Characterization of Starch Microspheres Prepared by a Sonochemical Method for the Potential Drug Delivery of Insulin
Olga Grinberg (2010)
Characterization of the thermal properties of microcrystalline cellulose by modulated temperature differential scanning calorimetry.
K. Picker (2002)
Interactions between hydrophobically modified starch and egg yolk proteins in solution and emulsions
E. Magnusson (2011)
From Waste to Healing Biopolymers: Biomedical Applications of Bio-Collagenic Materials Extracted from Industrial Leather Residues in Wound Healing
Mercedes Catalina (2013)
Hair care products: waving, straightening, conditioning, and coloring.
C. Bolduc (2001)
A cisplatin slow-release hydrogel drug delivery system based on a formulation of the macrocycle cucurbituril, gelatin and polyvinyl alcohol.
Rabbab Oun (2014)
Freeze-thaw stability of mayonnaise type oil-in-water emulsions
Emma Magnusson (2011)
A critical study of the origins and early development of hypodermic medication.
N. Howard-Jones (1947)
Polish Society of Food Technologists, Małopolska Branch
M Pałasiński (2005)
Natural polymers, thermal degradation of polymeric materials. Shropshire, Rapra Technology Limited Shanmugam et al (2005) Natural polymers and their applications
K Pielichowski (2005)
DSM invests in development of bio-based materials
Thixotropic aqueous solutions containing a divinyl sulfone-crosslinked polygalactomannan gum
R S Kohn (1988)
Development document for effluent limitation guidelines and new source performance standards for the off-shore subcategory of the oil and gas extraction point source category
Eco-friendly pharmaceutical packaging materials
A Singh (2011)
-Saldivar So (1999) Physicochemical changes of starch during maize tortilla production
M Campbell (2006)
Calcium phosphate biomineralization in peptide hydrogels for injectable bone-filling materials
T. Nonoyama (2012)
Preparation and characterization of alginate microspheres containing a model antigen
D. Lemoine (1998)
Fibrin glue to treat spinal fluid leaks associated with intrathecal drug systems.
E. D. Freeman (2014)
Chitosan/halloysite nanotubes bionanocomposites: structure, mechanical properties and biocompatibility.
Mingxian Liu (2012)
Elongational rheology of biodegradable poly(lactic acid)/poly[(butylene succinate)‐co‐adipate] binary blends and poly(lactic acid)/poly[(butylene succinate)‐co‐adipate]/clay ternary nanocomposites
Hassan Eslami (2013)
Bacterial cellulose membranes applied in topical and transdermal delivery of lidocaine hydrochloride and ibuprofen: in vitro diffusion studies.
Eliane Trovatti (2012)
Marine adhesive proteins: natural composite thermosets.
J. Waite (1990)
Diagnosis and treatment of iron-deficiency anaemia during pregnancy and postpartum
C. Breymann (2010)
Filter cake formation on the vertical well at high temperature and high pressure: Computational fluid dynamics modeling and simulations
A. Kabir (2011)
Mechanical properties and biodegradation characteristics of PHB-based films
L. Savenkova (2000)
Damar Batu as a novel matrix former for the transdermal drug delivery: in vitro evaluation
Atish S Mundada (2009)
Preparation and characterization of guar gum hydrogels as carrier materials for controlled protein drug delivery.
Hiroyuki Kono (2014)
[Transdermal therapeutic systems].
M. Rock (1983)
Understanding the Processing of Thermoplastic Starch
Robert Frederick Thomas Stepto (2006)
A REVIEW ON IONOTROPIC GELATION METHOD: NOVEL APPROACH FOR CONTROLLED GASTRORETENTIVE GELISPHERES
Poonam Patil (2012)
Thickening of sweet and sour sauces with various polysaccharide combinations
M. Gibiński (2006)
From Collagen to Gelatine
R. Schrieber (2007)
Hydroxypropylmethylcellulose and methylcellulose consumption reduce postprandial insulinemia in overweight and obese men and women.
K. Maki (2008)
Biodegradable starch/clay nanocomposite films for food packaging applications
M. Avella (2005)
Improving the environment for immobilized dehydrogenase enzymes by modifying Nafion with tetraalkylammonium bromides.
C. Moore (2004)
Green Polymer Chemistry and Bio‐based Plastics: Dreams and Reality
R. Muelhaupt (2013)
Extracting hydrogen and electricity from renewable resources.
B. Logan (2004)
Oil powders and gels from particle-stabilized emulsions.
Horst Adelmann (2012)
Investigation into the physicochemical stability and rheological properties of beta-carotene emulsion stabilized by soybean soluble polysaccharides and chitosan.
Zhanqun Hou (2010)
Propionate May Mediate the Hypocholesterolemic Effects of Certain Soluble Plant Fibers in Cholesterol-Fed Rats
W. Chen (1984)
Settling Rates for Flocculation of Iron and Manganese Ore-Containing Suspensions by Cationic Glycogen
W. Brostow (2008)
New dimensions in microstructure of food products
J. Aguilera (2000)
A Novel Injectable pH/Temperature Sensitive CS-HLC/β-GP Hydrogel: The Gelation Mechanism and Its Properties
Xian Li (2014)
Photobiodegradation of low‐density polyethylene/banana starch films
Usarat Ratanakamnuan (2006)
Cereal seed storage proteins: structures, properties and role in grain utilization.
P. Shewry (2002)
Biodegradable polymers. Principles of Tissue Engineering
J M Pachence (2007)
Satiation and Masticatory Function Modulated by Brain Histamine in Rats
T. Fujise (1998)
Emulgel: A New Platform For Topical Drug Delivery
V. Singla (2012)
Development and Field Application of a New Fluid-Loss Control Material
P. Nguyen (1996)
The use of polymers for dermal and transdermal delivery.
C. Valenta (2004)
Composite aqueous microgels: an overview of recent advances in synthesis, characterization and application
A. Pich (2007)
Why food microstructure
J. Aguilera (2005)
A cleaner production of rice husk-blended polypropylene eco-composite by gas-assisted injection moulding
R. Yam (2014)
Optimization of reaction conditions for preparing carboxymethyl cellulose from sago waste
V. Pushpamalar (2006)
A new gel casting of ceramics by reaction of sodium alginate and calcium iodate at increased temperatures
Z. Xie (2001)
Synthesis and antimicrobial activity of some novel crosslinked chitosan hydrogels
N A Mohamed (2012)
International conference on sustainable production of plastics and elastomers, organized by Applied Market Information
Microbial cellulose: fermentive production and applications
R C Prashant (2009)
Extraction of pectin from citrus fruit peel and use as natural binder in paracetamol tablet Nilesh
R Khule (2012)
Cosmetic science and technology series
M A Hoshowski (1997)
Process using gellan as afiltrate reducer for water-based drilling fluids
E Dreveton (1998)
Policy paper on bio-based economy in the EU: level playing field for bio-based chemistry and materials
C Michael (2011)
Composites of functional polymeric hydrogels and porous membranes
Q. Yang (2011)
The short-chain fatty acid butyrate induces apoptosis in colorectal tumour cell lines.
A. Hague (1995)
Development of natural-based wound dressings impregnated with bioactive compounds and using supercritical carbon dioxide.
A. M. A. Dias (2011)
Biomedical applications of collagen.
C. H. Lee (2001)
Synthetic polypeptides for biomedical applications
T. Deming (2007)
High and low carbohydrate and fat intakes: limits imposed by appetite and palatability and their implications for energy balance
J. Blundell (1999)
Detection of Proteins in Starch Granule Channels
Xian-Zhong Han (2005)
A Review of Recent Advances in the Polymeric Delivery of Attributes in Cosmetics and Personal Care Products
Robert Y. Lochhead (2010)
Development and bioadhesive properties of chitosan-ethylcellulose microspheres for nasal delivery.
A. Martinac (2005)
Structure and interactions in covalently and ionically crosslinked chitosan hydrogels for biomedical applications.
J. Berger (2004)
Intranasal delivery of morphine.
L. Illum (2002)
Rapidly dissolving fibroin microneedles for transdermal drug delivery
X. You (2011)
Diethyl methyl chitosan as an intestinal paracellular enhancer: ex vivo and in vivo studies.
M. R. Avadi (2005)
Different Effect of Psyllium and Guar Dietary Supplementation on Blood Pressure Control in Hypertensive Overweight Patients: A Six-Month, Randomized Clinical Trial
A. Cicero (2007)
Use of low m.s. (molar substitution) hydroxyethyl cellulose for fluid loss control in oil well applications
R H Raines (1986)
Chitosan flocculation of cardboard-mill secondary biological wastewater.
F. Renault (2009)
Extracting Conditions for Megrim (Lepidorhombus boscii) Skin Collagen Affect Functional Properties of the Resulting Gelatin
P. Montero (2000)
Recent Advances in Polyolefins/Natural Polymer Blends Used for Packaging Application
S. T. Sam (2014)
Interpenetrating network hydrogel beads of carboxymethylcellulose and egg albumin for controlled release of lipid lowering drug
Rashmi Boppana (2010)
Recent Applications of Natural Polymers in Nanodrug Delivery
A. P. Anwunobi (2011)
Cholesterol-lowering effects of dietary fiber: a meta-analysis.
L. Brown (1999)
Characterization of novel spray-dried polymeric particles for controlled pulmonary drug delivery.
M. Beck-Broichsitter (2012)
Lowering mechanical degradation of drag reducers in turbulent flow
W. Brostow (2007)
Hydrogel microparticles from lithographic processes: novel materials for fundamental and applied colloid science.
M. Helgeson (2011)
Applications of Chitosan and Chitosan Derivatives in Drug Delivery
V. Bansal (2011)
Treatise on Controlled Drug Delivery: Fundamentals-optimization-applications
A. Kydonieus (2017)
Succinic Acid: A New Platform Chemical for Biobased Polymers from Renewable Resources
I. Bechthold (2008)
Extraction and Characterization of Starch from Alkaline Cooked Corn Masa
W. S. Ratnayake (2007)
Comparison of rice husk-filled polyethylene composite and natural wood under weathering effects
W. Rahman (2011)
Polysaccharides in Food Emulsions
Alistair M. Stephen (2016)
Colloidal aspects of eating
Benjamin Le Révérend (2010)
Method for batch processing small wood samples to holocellulose for stable-carbon isotope analysis
S. W. Leavitt (1993)
Combined use of chitosan and alginate in the treatment of wastewater
Y. Qin (2007)
Caractérisation physico-chimique et sensorielle d'ingrédients cosmétiques : Une approche méthodologique
Laura A. Gilbert (2012)
Scaffolds from electrospun polyhydroxyalkanoate copolymers: fabrication, characterization, bioabsorption and tissue response.
T. Ying (2008)
Bioadhesive polysaccharide in protein delivery system: chitosan nanoparticles improve the intestinal absorption of insulin in vivo.
Yan Pan (2002)
Novel crosslinking methods to design hydrogels.
W. Hennink (2002)
Lipid oxidation in a menhaden oil-in-water emulsion stabilized by sodium caseinate cross-linked with transglutaminase.
Sarah S Kellerby (2006)
Nanofibrillar cellulose hydrogel promotes three-dimensional liver cell culture.
M. Bhattacharya (2012)
Fabrication of vitamin E-enriched nanoemulsions: factors affecting particle size using spontaneous emulsification.
A. H. Saberi (2013)
In vivo imaging of intragastric gelation and its effect on satiety in humans.
C. Hoad (2004)
ORIGINAL RESEARCH: The eco-profiles for current and near-future NatureWorks® polylactide (PLA) production
Erwin T.H. Vink (2007)
ph-sensitive cationic guar gum/poly (acrylic acid) polyelectrolyte hydrogels: Swelling and in vitro drug release
Yihong Huang (2007)
The production of polysaccharides by fungi active in the decomposition of wood and forest litter.
B. Bernier (1958)
Development of novel transdermal self-adhesive films for tenoxicam, an anti-inflammatory drug.
D. Nesseem (2011)
Factors affecting retention in spray-drying microencapsulation of volatile materials
M. Rosenberg (1990)
Sustained release of indomethacin from chitosan granules.
W. M. Hou (1985)
Taro corms mucilage/HPMC based transdermal patch: an efficient device for delivery of diltiazem hydrochloride.
Gunjan Sarkar (2014)
Intranasal drug delivery: an efficient and non-invasive route for systemic administration: focus on opioids.
S. Grassin-Delyle (2012)
Microgels — An alternative colloidal ingredient for stabilization of food emulsions
Eric M. Dickinson (2015)
Extraction of Gelatin from Megrim (Lepidorhombus boscii) Skins with Several Organic Acids
M. C. Gómez‐guillœn (2001)
Energy production from biomass (Part 1): Overview of biomass.
P. McKendry (2002)
Influence of pH and ι-carrageenan concentration on physicochemical properties and stability of βlactoglobulin-stabilized oil-in-water emulsions
Y S Gu (2004)
3-The health aspects of hydrocolloids
C A Edwards (2009)
Pourable water dispersible thickening composition for aqueous systems and a method of thickening said aqueous systems
B Dobias (1995)
Synthesis and properties of poly(butylene succinate): efficiency of different transesterfication catalysts
J Nicolas (2011)
Combustion properties of various species of wood
W Brostow (2009)
Improving properties of drilling solution-by addition of ferrochrome-lignosulphonate and aqueous solution of cement and carboxymethyl cellulose
V S Kotelnikov (1992)
Food proteins: a review on their emulsifying properties using a structure-function approach.
Ricky S H Lam (2013)
Effect of several factors on the mechanical properties of pressure-sensitive adhesives used in transdermal therapeutic systems
Dimitrios A Dimas (2008)
Municipal wastewater treatment by modified tannin flocculant agent
J. Beltrán-Heredia (2009)
Design, Fabrication and Analysis of Silicon Hollow Microneedles for Transdermal Drug Delivery System for Treatment of Hemodynamic Dysfunctions
M. Ashraf (2010)
New strategies to improve the intranasal absorption of insulin.
X. Duan (2010)
This paper is referenced by
The potential of cashew gum functionalization as building blocks for layer-by-layer films.
Álvaro J Leite (2017)
Advanced Materials From Fungal Mycelium: Fabrication and Tuning of Physical Properties
M. Haneef (2017)
Investigation of the mechanical and physical properties of PLA produced by injection molding for matrix material of polymer composites
Sedef Çakır (2018)
Applications of modified biomonomers and biomaterials: A prospective from Africa
Raouhi Sanaa (2019)
Dynamics of carbohydrate strands in water and interactions with clay minerals: influence of pH, surface chemistry, and electrolytes.
Tariq Jamil (2019)
Production and detection of polyhydroxybutyrate by Azohydromonas lata
Felicia Zlati (2019)
CONTROLLED DRUG RELEASE OF GRAFTED PECTIN
Mohammed Ali Firyal (2018)
1 Scale-up of Batch Rotor-Stator Mixers . Part 1 – Power Constants 1
J. James (2017)
Cooperative crystallization effect in the formation of sonochemically grafted active materials based on polysaccharides.
Y. Shebis (2020)
In vivo imaging of myonuclei during spontaneous muscle contraction reveals non-uniform nuclear mechanical dynamics in Nesprin/klar mutants
Dana Lorber (2019)
Polyol-based soft hydrogels for biorecognition and tissue engineering applications
Rotsiniaina Randriantsilefisoa (2020)
Green synthesized urchin like Pt/Cu bimetallic photonanocatalysts: Understanding composition effect
Devi Henam Sylvia (2017)
Stability and rheological properties of oil-in-water emulsions stabilised with protein isolates from brown bambara groundnut
Dunani Gloria Malefane (2019)
Recent advances and perspectives on starch nanocomposites for packaging applications
Z. Abdullah (2018)
Biodegradable polymers and constructs: A novel approach in drug delivery
Shiv Kumar Prajapati (2019)
Preparation of Food Flavor Nanoemulsions by High- and Low-Energy Emulsification Approaches
Shima Saffarionpour (2019)
Condensation Polymerization of Anthocyanin Biomolecule and its Effect on Polymers
Jaleel Kareem Ahmed (2019)
Extraction and characterization of cellulosic fibers from sawmill waste
K. D. H. N. Kahawita (2016)