Online citations, reference lists, and bibliographies.
← Back to Search

Charging Architectures For Electric And Plug-In Hybrid Electric Vehicles

S. Rivera, S. Kouro, Bin Wu
Published 2017 · Computer Science

Save to my Library
Download PDF
Analyze on Scholarcy Visualize in Litmaps
Share
Reduce the time it takes to create your bibliography by a factor of 10 by using the world’s favourite reference manager
Time to take this seriously.
Get Citationsy
This chapter provides an overview of the different charging architectures available for electric vehicles and plug-in hybrid electric vehicles. The charging architectures are addressed following two main categories: onboard chargers, used mainly for slow and semi-fast charging (generally AC connection), and off-board chargers, used for fast charging (DC connection). The chapter focuses on the mainstream solutions available in the industry, and also presents some recent advances and trends found in the literature. In addition, the chapter provides an introduction to well-established charging standards being used by manufacturers. Finally, the control schemes used in charging configurations, including the control schemes for DC–DC and AC–DC converter stages, are discussed, the latter considering both single- and three-phase control schemes.
This paper references
10.1109/TIA.1978.4503547
The Forced-Commutated Inverter as a Regenerative Rectifier
J. W. Wilson (1978)
10.1109/TIA.1981.4503992
A New Neutral-Point-Clamped PWM Inverter
A. Nabae (1981)
10.1109/IECON.1991.239183
Three phase PWM converter/inverter by means of instantaneous active and reactive power control
T. Ohnishi (1991)
10.1049/CP:19941049
10 kHz inductively coupled power transfer-concept and control
A. Green (1994)
10.1109/63.654972
Design considerations and topology selection for a 120 kW IGBT converter for EV fast charging
N. Kutkut (1995)
10.1109/APEC.1996.500491
Design and experimental investigation of a three-phase high power density high efficiency unity power factor PWM (VIENNA) rectifier employing a novel integrated power semiconductor module
J. Kolar (1996)
10.1109/41.557493
An overview of power electronics in electric vehicles
C. Chan (1997)
10.1109/41.744372
A contactless electrical energy transmission system
D. Pedder (1999)
10.1109/IAS.2000.883155
Virtual flux based direct power control of three-phase PWM rectifiers
M. Malinowski (2000)
Sensorless Control Strategies for Three - Phase PWM Rectifiers
M. Malinowski (2001)
10.1016/B978-012402772-5/50012-0
CHAPTER 11 – Control of Three-Phase PWM Rectifiers
M. Malinowski (2002)
Control in Power Electronics: selected problems
M. P. Kaźmierkowski (2002)
10.1109/TIA.2003.816517
Feasibility of a DC network for commercial facilities
A. Sannino (2002)
10.1109/TPWRD.2003.813873
Impact of EV battery chargers on the power quality of distribution systems
J. C. Gómez (2002)
DC microgrid based distribution power generation system
Y. Ito (2004)
10.1109/TIE.2005.855672
Design considerations for a contactless electric vehicle battery charger
Chwei-Sen Wang (2005)
10.1109/TPEL.2006.872379
Automotive DC-DC bidirectional converter made with many interleaved buck stages
Ó. García (2006)
High-Power Converters and AC Drives
B. Wu (2006)
10.1049/IET-EPA:20060264
Extended direct power control for multilevel inverters including DC link middle point voltage control
J. Eloy-Garcia (2007)
10.1109/PCCON.2007.372958
Virtual-Flux Direct Power Control forMains Connected Three-LevelNPC Inverter Systems
W. Kolar (2007)
10.1109/PESC.2008.4592181
Five-level virtual-flux direct power control for the active neutral-point clamped multilevel inverter
L. Serpa (2008)
10.1109/VPPC.2009.5289705
Inductively coupled power transfer for continuously powered electric vehicles
Z. Pantic (2009)
10.1109/TVT.2009.2028070
Advanced Integrated Bidirectional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Vehicles
Y. Lee (2009)
10.1109/JPROC.2009.2030235
Multilevel Converters: An Enabling Technology for High-Power Applications
J. Rodríguez (2009)
10.1109/TVT.2009.2017546
Development of a Compact Switched-Reluctance Motor Drive for EV Propulsion With Voltage-Boosting and PFC Charging Capabilities
Hung-Chun Chang (2009)
10.1109/ISGTEUROPE.2010.5638899
Ultra-fast DC-charge infrastructures for EV-mobility and future smart grids
D. Aggeler (2010)
10.1109/MPE.2009.935553
A New Car, a New Grid
L. Dickerman (2010)
10.1109/VPPC.2010.5729057
A combined multiphase electric drive and fast battery charger for Electric Vehicles
L. De Sousa (2010)
10.1049/EL.2010.2710
On-board battery charger for PHEV without high-voltage electrolytic capacitor
Hyung-Jun Chae (2010)
10.1109/VPPC.2010.5729063
An integrated fast battery charger for Electric Vehicle
S. Lacroix (2010)
10.1109/APEC.2010.5433359
Review of non-isolated bi-directional DC-DC converters for plug-in hybrid electric vehicle charge station application at municipal parking decks
Yu Du (2010)
10.1109/TPEL.2010.2077682
Low-Voltage Bipolar-Type DC Microgrid for Super High Quality Distribution
H. Kakigano (2010)
10.1109/VPPC.2010.5729042
Design and implementation of a high-efficiency on- board battery charger for electric vehicles with frequency control strategy
Jong-Soo Kim (2010)
10.1109/VPPC.2010.5729220
A multiphase traction/fast-battery-charger drive for electric or plug-in hybrid vehicles: Solutions for control in traction mode
A. Bruyere (2010)
10.1109/TIE.2010.2043039
Medium-Voltage Multilevel Converters—State of the Art, Challenges, and Requirements in Industrial Applications
H. Abu-Rub (2010)
10.1109/TIE.2010.2049719
Recent Advances and Industrial Applications of Multilevel Converters
S. Kouro (2010)
10.1109/TPEL.2011.2160972
Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles
J. Huh (2011)
10.1109/TPWRS.2010.2057456
Modeling of Load Demand Due to EV Battery Charging in Distribution Systems
K. Qian (2011)
10.1109/TVT.2011.2162258
An Isolated High-Power Integrated Charger in Electrified-Vehicle Applications
S. Haghbin (2011)
10.1109/VPPC.2011.6043096
Comprehensive analysis of high quality power converters for level 3 off-board chargers
S. Dusmez (2011)
10.1109/ICPE.2011.5944762
3.3kW on board charger for electric vehicle
H. J. Chae (2011)
10.1109/TVT.2012.2210259
An Automotive Onboard 3.3-kW Battery Charger for PHEV Application
D. Gautam (2012)
10.1109/EPEPEMC.2012.6397481
Highly efficient and compact DC-DC converter for ultra-fast charging of electric vehicles
Daniel Christen (2012)
10.1109/TVT.2012.2213104
Comprehensive Topological Analysis of Conductive and Inductive Charging Solutions for Plug-In Electric Vehicles
A. Khaligh (2012)
10.1109/IEVC.2012.6183266
Inductive power transfer for electric vehicles: Potential benefits for the distribution grid
S. Mohagheghi (2012)
10.1109/TSG.2011.2159278
Spatial and Temporal Model of Electric Vehicle Charging Demand
Sungwoo Bae (2012)
10.1109/TPEL.2011.2178103
A Novel ZVZCS Full-Bridge DC/DC Converter Used for Electric Vehicles
M. Pahlevaninezhad (2012)
10.1002/9781119941446
Predictive Control of Power Converters and Electrical Drives: Rodriguez/Predictive Control of Power Converters and Electrical Drives
J. Rodríguez (2012)
10.1109/TVT.2012.2192459
A Bidirectional High-Power-Quality Grid Interface With a Novel Bidirectional Noninverted Buck–Boost Converter for PHEVs
O. Onar (2012)
10.1109/TPEL.2013.2252200
A High-Efficient Nonisolated Single-Stage On-Board Battery Charger for Electric Vehicles
Chang-yeol Oh (2013)
10.1109/TPEL.2012.2230274
An Integrated 20-kW Motor Drive and Isolated Battery Charger for Plug-In Vehicles
S. Haghbin (2013)
10.1109/TIE.2012.2196903
New Method to Achieve AC Harmonic Elimination and Energy Storage Integration for 12-Pulse Diode Rectifiers
Sanzhong Bai (2013)
10.1109/TPEL.2012.2212917
Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles
Mustafa YILMAZ (2013)
10.1109/MELE.2013.2272481
Courting and Sparking: Wooing Consumers? Interest in the EV Market
N. Kar (2013)
10.1109/MELE.2013.2273228
Cutting the Cord: Static and Dynamic Inductive Wireless Charging of Electric Vehicles
S. Lukic (2013)
10.1109/TIE.2012.2187414
Grid-Connected Integrated Battery Chargers in Vehicle Applications: Review and New Solution
S. Haghbin (2013)
10.1109/TPEL.2013.2245146
Unified Active Filter and Energy Storage System for an MW Electric Vehicle Charging Station
Sanzhong Bai (2013)
10.1109/TIE.2013.2258294
Design and Implementation of Shaped Magnetic-Resonance-Based Wireless Power Transfer System for Roadway-Powered Moving Electric Vehicles
Jaegue Shin (2014)
10.1109/ITEC.2014.6861764
Design considerations for loosely coupled inductive power transfer (IPT) system for electric vehicle battery charging - A comprehensive review
K. Aditya (2014)
10.1109/ISIE.2014.6864836
Distributed dc bus EV charging station using a single dc-link h-bridge multilevel converter
S. Rivera (2014)
10.1109/TPEL.2013.2294711
Multilevel Direct Power Control—A Generalized Approach for Grid-Tied Multilevel Converter Applications
S. Rivera (2014)
10.1109/TIE.2015.2409052
Industrial Electronics for Electric Transportation: Current State-of-the-Art and Future Challenges
S. Williamson (2015)
10.1109/EPE.2015.7309229
Configurable Modular Multilevel Converter (CMMC) for flexible EV
Martel Tsirinomeny (2015)
10.1109/TIE.2014.2348937
Electric Vehicle Charging Station Using a Neutral Point Clamped Converter With Bipolar DC Bus
S. Rivera (2015)
10.1109/TIE.2014.2367237
A Modular Multiport Power Electronic Transformer With Integrated Split Battery Energy Storage for Versatile Ultrafast EV Charging Stations
M. Vasiladiotis (2015)
10.1109/TPEL.2014.2310127
Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
M. Pérez (2015)
10.1109/TPEL.2015.2397453
Comprehensive DC Power Balance Management in High-Power Three-Level DC–DC Converter for Electric Vehicle Fast Charging
L. Tan (2016)



This paper is referenced by
Semantic Scholar Logo Some data provided by SemanticScholar