Online citations, reference lists, and bibliographies.

The Effect Of Particle Shape On The Sintering Of Aluminum

Zhong Yuan Liu, Timothy B. Sercombe, G. B. Schaffer
Published 2007 · Materials Science
Cite This
Download PDF
Analyze on Scholarcy
Share
The effect of particle size and shape on the sintering response of aluminum powder has been examined. Spherical 3-, 5-, and 15-μm powders and irregularly shaped 6-, 7-, and 15-μm powders from two manufacturers were mixed with 4 wt pct Sn, poured into a crucible, and sintered for 2 hours under argon at 620 °C. The particle shape appears to be a critical characteristic governing the sintering characteristics. The particle size and size distribution, the tap density, the oxide film thickness, the surface chemistry, and the impurity concentration had little influence. The irregular particles sintered to a final density of 88 to 91 pct, whereas the spherical particles reached a density of only 65 to 73 pct. It is suggested that the differential thermal expansion between the aluminum particle and its oxide film may cause the oxide to fracture and that the fracture characteristics are different between the two powder morphologies.



This paper is referenced by
Equal channel angular pressing of elemental & alloyed P/M aluminium systems
Nicholas Harrison (2014)
10.1007/S12666-011-0089-2
Sintering Behaviour and Mechanical Properties of Al–Cu–Mg–Si–Sn Aluminum Alloy
C. Padmavathi (2011)
10.1007/s12613-019-1724-x
A novel approach to predict green density by high-velocity compaction based on the materials informatics method
Kai-qi Zhang (2019)
10.1007/s40195-016-0482-2
Influences of Hot-Isostatic-Pressing Temperature on the Microstructure, Tensile Properties and Tensile Fracture Mode of 2A12 Powder Compact
Guodong Wang (2016)
10.1016/J.MSEA.2014.01.095
Influences of hot-isostatic-pressing temperature on microstructure, tensile properties and tensile fracture mode of Inconel 718 powder compact
Litao Chang (2014)
10.1063/1.5094444
The effect of annealing on the impact fragmentation of a pure aluminum reactive material
Jacob Kline (2019)
Materials and Methods to Fabricate Porous Structures Using Additive Manufacturing Techniques
Mohsen Ziaee (2018)
10.1108/ACMM-03-2018-1909
Effect of temperature and pressure on mechanical, surface and electrochemical properties of Al-1.5Cu-5.5Zn-2.5Mg (Alumix-431)
Ayse Nur Acar (2018)
10.1016/J.COMMATSCI.2018.07.049
Machine leaning aided study of sintered density in Cu-Al alloy
ZhengHua Deng (2018)
10.3390/MET5020547
Research on Semisolid Microstructural Evolution of 2024 Aluminum Alloy Prepared by Powder Thixoforming
Pubo Li (2015)
10.1016/J.JALLCOM.2016.05.143
The role of alloying elements on the sintering of Cu
Huali Hao (2016)
10.2320/MATERTRANS.M2015367
Microstructural Evolution during Partial Remelting of a 2024 Aluminum Alloy Prepared by Cold Pressing Ball-Milled Alloy Powders
Pu Bo Li (2016)
10.3139/147.110461
Effects of Sintering Temperature and Time on the Properties of Al-Cu Pm Alloy
Azim Gökçe (2017)
10.1177/0021998317740944
Evaluation of an original use of spark plasma sintering to laminate carbon fibres reinforced aluminium
Christophe Perron (2018)
10.1016/J.ADDMA.2019.05.031
Binder jetting: A review of process, materials, and methods
Mohsen Ziaee (2019)
10.1016/J.JMATPROTEC.2013.03.009
Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: Effect of processing conditions and powder properties
E. O. Olakanmi (2013)
10.1177/0954406220910445
An experimental investigation of the fabrication of biodegradable zinc–hydroxyapatite composite material using microwave sintering
Dayanidhi Krishana Pathak (2020)
10.1155/2015/987687
Evaluation of Sintering Behavior of Premix Al-Zn-Mg-Cu Alloy Powder
Haris Rudianto (2015)
10.2320/MATERTRANS.M2016070
Effects of Partial Remelting on Microstructure of Al-Si-Ti Bulk Alloy Prepared by Cold Pressing Mixed Powders
Yi Wang (2016)
Multi-scale processing of powder-based aluminum alloys
J. J. Patel (2012)
10.1155/2014/312908
Microstructure and Mechanical Properties of Vacuum Hot Pressed P/M Short Steel Fiber Reinforced Aluminum Matrix Composites
Swati Jain (2014)
10.2339/POLITEKNIK.389588
The Physical Properties Of Aluminium-7xxx Series Alloys Produced By Powder Metallurgy Method
Ayse Nur Acar (2018)
10.1002/adem.201901194
Open‐Cell Aluminum Foams by the Sponge Replication Technique: A Starting Powder Particle Study
Alina Sutygina (2020)
10.1016/J.MSEA.2018.11.024
Effect of powder oxidation on interparticle boundaries and mechanical properties of bulk Al prepared by spark plasma sintering of Al powder
Lei R. Cao (2019)
10.1007/s10854-018-0208-5
The effect of Mg(NO3)2 addition on the formation of AlN nanowire by direct nitridation
Fatih Kurtuldu (2018)
10.1016/J.JALLCOM.2012.04.098
Effect of mechanical alloying on the microstructure and properties of Al–Sn–Mg alloy
Jitendra Patel (2012)
10.1016/J.PMATSCI.2015.03.002
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi (2015)
10.4028/www.scientific.net/MSF.794-796.501
Mechanical Properties of Sintered of Al-5.5Zn-2.5Mg-0.5Cu PM Alloy
Haris Rudianto (2014)
10.1007/S10853-011-5636-Z
Microstructure evolution and elemental diffusion of SiCp/Al–Cu–Mg composites prepared from elemental powder during hot pressing
Qunxi Zhang (2011)
Semantic Scholar Logo Some data provided by SemanticScholar