Online citations, reference lists, and bibliographies.
← Back to Search

Formation And Organization Of Amino Terminated Self-assembled Layers On Si(001) Surface

G. Demirel, MO Çağlayan, B. Garipcan, M. Duman, E. Pişkin
Published 2007 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
We have investigated the effects of dipping time, solution concentration and solvent type on the formation of self-assembled monolayers with aminosiloxane molecules (i.e.,N-(3 trimethoxysilylpropyl)diethylenetriamine (TPDA)) on the Si(001) surface. Studies performed with an ellipsometer showed that monolayers with a thickness of about 1.2 nm were formed when the dipping time is about 2 h, while multilayer were observed for longer time periods. The effect of the TPDA concentration on the thickness of the deposited layer was not very profound, however, the contact angle data exhibit importance of concentration on the surface coverage. The type of the solvent used in the formation of the monolayers was found an important parameter. Monolayers were formed with solvent having larger dielectric constants. Relatively thick multilayer was observed when benzene was used as the solvent, due to its quite low dielectric constant (hydrophobicity).
This paper references
Surf. Interface . Anal
H Sugimura (2002)
Colloids Surf. B J. Am. Chem. Soc
E Ostuni (1999)
Surf. Sci. Accepted
G Demirel (2007)
10.1016/S0043-1648(03)00192-3
Effect of molecular structure of self-assembled monolayers on their tribological behaviors in nano- and microscales
H. Ahn (2003)
Chem. Rev
J C Love (2005)
Jpn. J. Appl. Phys. Part
M Nakano (2003)
10.1116/1.1336833
Amino-terminated self-assembled monolayer on a SiO2 surface formed by chemical vapor deposition
A. Hozumi (2001)
Wear Langmuir
L Qian (2003)
10.1021/JA020233L
Structural effects on the barrier properties of self-assembled monolayers formed from long-chain omega-alkoxy-n-alkanethiols on copper.
G. K. Jennings (2003)
10.1016/S0927-7765(99)00004-1
The interaction of proteins and cells with self-assembled monolayers of alkanethiolates on gold and silver
E. Ostuni (1999)
Whitesides
J C Love (2002)
Langmuir
R Colorado (2003)
Adv. Mater
A Salomon (2003)
Mater. Lett
S A Kulkarni (2005)
10.1002/ADMA.200306091
Comparison of Electronic Transport Measurements on Organic Molecules
Adi Salomon (2003)
10.1063/1.119183
Self-assembled-monolayer film islands as a self-patterned-mask for SiO2 thickness measurement with atomic force microscopy
T. Komeda (1997)
Surf. Sci
G Demirel (2007)
10.1139/P03-014
Reduction of ice adhesion to metal by using self-assembling monolayers (SAMs)
V. Petrenko (2003)
J. Vac. Sci. Technol. A
A Hozumi (2001)
Wear
H S Ahn (2003)
Can. J. Phys
V F Petrenko (2003)
J. Phys. Chem.B
H Y Nie (2006)
10.1002/SIA.1358
Organosilane self‐assembled monolayers formed at the vapour/solid interface
H. Sugimura (2002)
10.1016/c2009-0-20920-2
Handbook of Optical Constants of Solids
D. Lynch (1985)
10.5006/1.3281678
Tarnish Protection of Silver Using a Hexadecanethiol Self-Assembled Monolayer and Descriptions of Accelerated Tarnish Tests
T. D. Burleigh (2001)
10.1021/LA00091A013
Wet chemical approaches to the characterization of organic surfaces: self-assembled monolayers, wetting, and the physical-organic chemistry of the solid-liquid interface
G. Whitesides (1990)
10.1021/LA0263763
Wettabilities of Self-Assembled Monolayers on Gold Generated from Progressively Fluorinated Alkanethiols
Jr.† and Ramon Colorado (2003)
10.1023/A:1024868532575
Tribological Properties of Self-Assembled Monolayers and Their Substrates Under Various Humid Environments
L. Qian (2003)
10.1021/LA034354Q
Friction and molecular order of alkanethiol self-assembled monolayers on Au(111) at elevated temperatures measured by atomic force microscopy
X. Yang (2003)
10.1021/JA012569L
Self-assembled monolayers of alkanethiolates on palladium are good etch resists.
J. Love (2002)
Appl. Phys. Lett
T Komeda (1997)
10.1143/JJAP.42.4734
Alkyl chain length effect on tribological behavior of alkanethiol self-assembled monolayers on au
M. Nakano (2003)
10.1021/AR9801144
Adhesion, friction, and mechanical properties of functionalized alkanethiol self-assembled monolayers.
J. Houston (2002)
10.1021/LA00058A043
Moisture absorption characteristics of organosiloxane self-assembled monolayers
David L. Angst (1991)
Langmuir
F Zhang (2004)
Acc. Chem. Res
J E Houston (2002)
Corrosion
T D Burleigh (2001)
10.1039/B506781B
Solution self-assembly and solid state properties of fluorinated amphiphilic calix[4]arenes.
O. M. Martín (2005)
Chem. Commun
O M Martin (2005)
10.1016/S0043-1648(03)00058-9
Micro/nano-tribological characteristics of self-assembled monolayer and its application in nano-structure fabrication
I. Sung (2003)
10.1021/LA034147Q
Emersion of 11-mercapto-1-undecanol-modified Ag substrates from aqueous and nonaqueous solvents: The effect of emersion velocity on emersed solvent layer thickness
Domenic J. Tiani (2003)
10.1021/LA0354638
Self-assembled molecular films of aminosilanes and their immobilization capacities.
F. Zhang (2004)
J. Am. Chem. Soc
N Tillman (1998)
J. Am. Chem. Soc
G K Jenning (2003)
in ed
D. E. Aspness (1985)
Nanoscale Res Lett
(2007)
10.1021/JP062811G
Delivering octadecylphosphonic acid self-assembled monolayers on a Si wafer and other oxide surfaces.
H. Nie (2006)
10.1515/9783111576855-015
J
Seguin Hen (1824)
Handbook of Optical Constants of Solids
E. D. Palik (1997)
Surf
G. Demirel (2007)
10.1016/J.MATLET.2005.07.026
Growth kinetics and thermodynamic stability of octadecyltrichlorosilane self-assembled monolayer on Si (100) substrate
S. Kulkarni (2005)
10.1016/J.TSF.2005.06.090
Self-assembled monolayers of semifluorinated thiols on electrochemically modified polycrystalline nickel surfaces
L. Tortech (2005)
10.1021/CR0300789
Self-assembled monolayers of thiolates on metals as a form of nanotechnology.
J. Love (2005)



This paper is referenced by
10.1016/J.APSUSC.2009.10.099
Surface modification of poly(dimethylsiloxane) for microfluidic assay applications
C. Séguin (2010)
10.1117/1.3665215
Controllable fabrication of enclosed micro/nanochannels via polymethyl methacrylate pattern as sacrificial template and capillary effect
Yunqiao Wu (2011)
10.1016/J.COLSURFA.2010.12.003
Fabrication and characterisation of self-assembled monolayers of N-[3-(trimethoxysilyl)propyl]diethylenetriamine on silica particles
Candace Chan (2011)
10.1016/j.jcis.2013.06.014
Effect of molecular structure and packing density of an azo self-assembled monolayer on liquid crystal alignment.
M. R. Vengatesan (2013)
10.1016/j.aca.2012.04.006
Small molecule analysis using laser desorption/ionization mass spectrometry on nano-coated silicon with self-assembled monolayers.
Ö. Çelikbıçak (2012)
10.1007/s11696-020-01282-3
An ellipsometric biosensor using aptamer for the detection of mercuric ions
T. Ertan (2020)
10.1016/J.APSUSC.2019.01.088
Area selective grafting of siloxane molecules on low-k dielectric with respect to copper surface
A. Rezvanov (2019)
10.1021/la3010129
Studies on the effect of solvents on self-assembled monolayers formed from organophosphonic acids on indium tin oxide.
X. Chen (2012)
10.1016/J.TSF.2010.07.125
Preparation and characterization of poly(indole-3-carboxaldehyde) film at the glassy carbon surface
Didem Deletioglu (2010)
10.1002/SIA.5328
Synthesis, characterization, and application of silver nanoparticle‐thiophenol nanocomposite film on the glassy carbon surface
Remziye Güzel (2013)
10.1080/02678292.2013.805833
In situ self-assembled photo-switchable liquid crystal alignment layer using azosilane monomer-liquid crystal mixture system
M. R. Vengatesan (2013)
10.1002/sca.20192
Thermally driven stability of octadecylphosphonic acid thin films grown on SS316L.
M. S. Lim (2010)
Study of the desmoplakin protein using nuclear magnetic resonance spectroscopy and its interaction with gold nanoclusters using atomic force microscopy
Penelope Rodriguez Zamora (2014)
10.1007/s11663-014-0239-0
Deposition and Characterization of 3-Aminopropyltrimethoxysilane Monolayer Diffusion Barrier for Copper Metallization
S. Sharma (2014)
10.1080/10739140902831693
Analysis of 2-Benzo[c]cinnoline Nanofilm at the Gold Surface
Z. Üstündaǧ (2009)
10.1007/s10965-013-0328-9
Fabrication of polyelectrolyte/amine-modified silica composite thin film by coupling of layer-by-layer assembly and sol–gel techniques
Huanhuan Liu (2014)
10.1016/J.TSF.2008.10.073
Electrochemical and spectroscopic characterization of a Benzo[c]cinnoline electrografted platinum surface
A. İsbir-Turan (2009)
10.1016/j.apsusc.2019.145210
Growth and organization of (3-Trimethoxysilylpropyl) diethylenetriamine within reactive amino-terminated self-assembled monolayer on silica
Yannick Dufil (2020)
10.1186/1556-276X-6-483
Self-assembled monolayer of designed and synthesized triazinedithiolsilane molecule as interfacial adhesion enhancer for integrated circuit
Fang Wang (2011)
10.1016/J.MOLSTRUC.2010.08.024
Synthesis, enhanced spectroscopic characterization and electrochemical grafting of N-(4-aminophenyl)aza-18-crown-6: Application of DEPT, HETCOR, HMBC-NMR and X-ray photoelectron spectroscopy
P. Deveci (2010)
10.1021/BK-2011-1070.CH012
Thermally Treated Octadecylphosphonic Acid Thin Film Grown on SS316L and Its Stability in Aqueous Environment
M. S. Lim (2011)
Coating of wellbore grain surfaces to prevent scale deposition/adhesion
Nasim Kazemi (2014)
10.1016/j.saa.2020.118682
Mercuric ion detection by plasmon-enhanced spectrophotometric ellipsometer using specific oligonucleotide probes.
M. O. Caglayan (2020)
10.1016/J.SURFCOAT.2014.04.041
Thin electroless Co(W,P) film growth on titanium–nitride layer modified by self-assembled monolayer
M. Malki (2014)
10.1007/s10008-011-1474-9
Synthesis of some azacrown derivatives and fabrication of their nanofilms on the glassy carbon surface
P. Deveci (2011)
Semantic Scholar Logo Some data provided by SemanticScholar