Online citations, reference lists, and bibliographies.

Phase-field Simulation Of Micropores Constrained By The Dendritic Network During Solidification

Hossein Meidani, A. Jacot
Published 2011 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
Abstract A phase-field model has been developed to describe the morphology of pores constrained by a dendritic solid network, and are forced to adopt complex non-spherical shapes. The distribution of the solid, liquid and gas phases was calculated with a multiphase-field approach which accounts for the pressure difference between the liquid and the gas. The model considers the partitioning of the dissolved gas at interfaces, gas diffusion and capillary forces at the solid/liquid, liquid/gas and gas/solid interfaces. The model was used to study the influence of the dendrite arm spacing (DAS) and the solid fraction on the state of a pore. The calculations show that a pore constrained to grow in a narrow liquid channel exhibits a substantially higher mean curvature, a larger pressure and a smaller volume than an unconstrained pore. Comparisons with simple geometrical models indicate that analytical approaches show a good trend but tend to underestimate the pore curvature, in particular at high solid fractions, where pores have to penetrate the thin liquid channels. For pores spanning over distances larger than the average DAS, the simulations showed that the radius of curvature can vary between two limits, which are given by the size of the narrowest section that the pore needs to pass in order to expand and by the largest sphere that can be fitted in the interdendritic liquid. The pore curvature is therefore a complex non-monotonic function of the DAS, the solid fraction, the hydrogen content and statistical variations of the liquid channel width.
This paper references
10.1063/1.332209
On the measurement of surface free energy and surface tension of solid metals
V. K. Kumikov (1983)
10.1016/S0167-2789(97)00226-1
The multiphase-field model with an integrated concept for modelling solute diffusion
J. Tiaden (1998)
10.1007/S11663-006-9013-2
Modeling the Effect of Finite-Rate Hydrogen Diffusion on Porosity Formation in Aluminum Alloys
K. Carlson (2007)
10.1007/BF02647028
A thermodynamic prediction for microporosity formation in aluminum-rich Al-Cu alloys
D. Poirier (1987)
10.1007/BF02679728
Mathematical modeling of porosity formation in solidification
K. Kubo (1985)
10.1103/PhysRevE.72.011602
Quantitative phase-field modeling of two-phase growth.
R. Folch (2005)
10.1103/PHYSREVB.66.144104
Complete mapping of the anisotropic free energy of the crystal-melt interface in Al
J. Morris (2002)
Modeling of casting, welding and advanced solidification processes-V : proceedings of the fifth International Conference on Modeling of Casting and Welding Processes, held in Davos Switzerland, September 16-21, 1990
Welding Processes (1991)
10.1007/S12666-009-0047-4
Phase-field simulation of micropores constrained by a solid network
A. Jacot (2009)
10.1016/S0167-2789(99)00184-0
A multi-phase-field model of eutectic and peritectic alloys: numerical simulation of growth structures
B. Nestler (2000)
Aluminum: Properties and Physical Metallurgy
J. Hatch (1984)
10.1007/S11661-002-0041-5
Modeling of microporosity, macroporosity, and pipe-shrinkage formation during the solidification of alloys using a mushy-zone refinement method: Applications to aluminum alloys
C. Péquet (2002)
10.1016/S1359-6454(99)00363-8
Diffusion-controlled growth of hydrogen pores in aluminium-silicon castings : In situ observation and modelling
R. Atwood (2000)
10.1146/ANNUREV.MATSCI.32.101901.155803
Phase-Field Simulation of Solidification
W. Boettinger (2002)
10.1016/S1359-6454(97)00081-5
Hydrogen porosity in directional solidified aluminium-copper alloys:in situ observation
P. Lee (1997)



This paper is referenced by
10.1016/J.ACTAMAT.2011.12.049
Three-dimensional phase-field simulation of micropore formation during solidification: Morphological analysis and pinching effect
H. Meidani (2012)
10.1088/1757-899X/84/1/012081
Modeling of percolation of globular-equiaxed grains in Al-Cu alloys
Christophe Mondoux (2015)
10.1016/J.COMMATSCI.2015.12.018
Phase-field modeling of microstructure evolution during solidification in presence of gas bubble
L. Du (2016)
10.1016/J.MTLA.2018.09.030
Modeling of hydrogen porosity formation during solidification of dendrites and irregular eutectics in Al–Si alloys
Qingyu Zhang (2018)
10.1016/j.mtla.2019.100508
Optimizing process windows for minimizing the pore size of Ni-based single crystal superalloys
Keli Liu (2019)
10.1038/s41598-019-49531-0
Three-dimensional cellular automaton simulation of coupled hydrogen porosity and microstructure during solidification of ternary aluminum alloys
Cheng Gu (2019)
10.5075/epfl-thesis-6681
Mesoscopic Modeling and Experimental Investigations of the Last-Stage Solidification of Globular-Equiaxed Grains in Metallic Alloys
Christophe Mondoux (2015)
10.1088/1757-899X/33/1/012104
3D Phase-Field Simulation of Micropore Formation during Solidification: Morphological Analysis
H. Meidani (2012)
10.1016/J.MATDES.2016.05.070
Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
Galina Kasperovich (2016)
10.1016/J.ICHEATMASSTRANSFER.2016.10.014
A comparison of time-scales governing the interaction and growth of hydrogen bubbles with a solidifying front
Shyamprasad Karagadde (2016)
10.1007/S11837-018-3057-Z
Phase Field Simulation of Dendritic Solidification of Ti-6Al-4V During Additive Manufacturing Process
Linmin Wu (2018)
10.1016/J.IJHEATMASSTRANSFER.2019.01.060
Solute convection effects on a bubble entrapped as a pore during unidirectional upward solidification
P. S. P. Wei (2019)
A study of some of the foundry processing factors influencing the quality of titanium alloy investment castings
Iman A. Khaled (2015)
Solidification in laser powder deposition of Ti-Nb alloys
Vahid Abbasi Fallah (2011)
10.1007/s11661-019-05593-3
Phase-Field Modeling of Microstructure Evolution in the Presence of Bubble During Solidification
Ang Zhang (2020)
10.1016/J.COMMATSCI.2012.07.045
A model for growth and engulfment of gas microporosity during aluminum alloy solidification process
Shyamprasad Karagadde (2012)
10.1007/s11661-014-2647-9
Multiphase-Field Modeling of Micropore Formation in Metallic Alloys
H. Meidani (2014)
10.1016/j.ijheatmasstransfer.2020.119474
Solute segregation due to a bubble entrapped as a pore in solid during unidirectional solidification
PengSheng Wei (2020)
Semantic Scholar Logo Some data provided by SemanticScholar