Online citations, reference lists, and bibliographies.
← Back to Search

Comparison Of Fly Ash, Silica Fume And Metakaolin From Mechanical Properties And Durability Performance Of Mortar Mixtures View Point

A. Mardani-Aghabaglou, G. I. Sezer, K. Ramyar
Published 2014 · Materials Science

Save to my Library
Download PDF
Analyze on Scholarcy Visualize in Litmaps
Share
Reduce the time it takes to create your bibliography by a factor of 10 by using the world’s favourite reference manager
Time to take this seriously.
Get Citationsy
In this study the effect of cement replacement with fly ash, silica fume and metakaolin on the compressive strength, dynamic elastic modulus, chloride-ion penetration, water absorption, water sorptivity, and freeze–thaw and sulfate resistance of the mortar mixtures were comparatively investigated. In addition, micro-structural investigation was performed on some selected mortar mixtures, and regression analysis was applied on the sulfate resistance test results. It was observed that, the presence of the mineral admixture and its type changed the ettringite morphology. Besides, only ball-ettringite and a special type of ettringite were observed in the silica fume- and metakaolin-bearing mixtures, respectively. The needle-like and ball-ettringite formation were found in the fly ash mixtures. In the control mixture the needle-like, ball-ettringite and massive ettringite were detected. Overall test results revealed that the performance of the mixtures was arranged in descending order as silica fume-, metakaolin-, fly ash-bearing mixtures and the control one.
This paper references
10.14359/11690
Comparison of Results of Three Methods for Determining Young’s Modulus of Elasticity of Concrete
R. Philleo (1955)
Properties of Concrete
A. Neville (1968)
10.1142/9789813238268_0005
Cement replacement materials
R. N. Swamy (1986)
10.1201/9781351070843
Condensed Silica Fume in Concrete
V. Malhotra (1987)
10.1016/S0958-9465(97)00020-6
Mechanical properties and frost resistance of silica fume concrete
B. Sabir (1997)
10.1016/S0958-9465(99)00034-7
Evaluation of mineral admixtures on the viewpoint of chloride ion migration through mortar
M. Hisada (1999)
10.1016/S0008-8846(02)00729-9
The influence of mineral admixtures on sulfate resistance of limestone cement pastes aged in cold MgSO4 solution
T. Vuk (2002)
10.1016/S0958-9465(01)00061-0
Performance of metakaolin concrete at elevated temperatures
C. Poon (2003)
10.1016/J.MATCHEMPHYS.2003.12.025
The diffusion characteristic of concrete with mineral admixtures between salt ponding test and accelerated chloride migration test
C. Yang (2004)
Concrete: Microstructure, Properties, and Materials
P. K. Mehta (2005)
10.1016/J.BUILDENV.2005.10.024
Sulfuric acid resistance of high-volume fly ash concrete
S. Aydın (2007)
10.1016/J.CONBUILDMAT.2008.08.024
Optimization of fineness to maximize the strength activity of high-calcium ground fly ash – Portland cement composites
B. Felekoğlu (2009)
10.1016/J.CLAY.2008.11.007
Influence of metakaolin on the properties of mortar and concrete: A review
R. Siddique (2009)
10.1016/J.CEMCONCOMP.2010.01.002
Effect of ettringite morphology on DEF-related expansion
K. Tosun (2010)
10.1016/J.CONBUILDMAT.2011.03.011
Strength and corrosion properties of Portland cement mortar and concrete with mineral admixtures
X. Shi (2011)
10.1016/J.CONBUILDMAT.2011.03.036
Use of mineral admixtures for enhanced resistance against sulfate attack
H. Atahan (2011)
10.1016/J.CONBUILDMAT.2011.03.014
Silica fume admixture effect on the dynamic properties of concrete
V. Giner (2011)
10.1016/J.JARE.2011.03.004
Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures
R. Siddique (2012)
10.1016/J.CONBUILDMAT.2011.06.064
Compressive strength and sulfate resistance of limestone and/or silica fume mortars
G. Sezer (2012)
10.1016/J.CEMCONCOMP.2012.11.004
How does fly ash mitigate alkali–silica reaction (ASR) in accelerated mortar bar test (ASTM C1567)?
Seyed Shafaatian (2013)
10.1016/J.CEMCONCOMP.2013.01.009
Freeze–thaw resistance and transport properties of high-volume fly ash roller compacted concrete designed by maximum density method
A. Mardani-Aghabaglou (2013)
10.1016/J.CONBUILDMAT.2012.07.109
Mechanical properties of high-volume fly ash roller compacted concrete designed by maximum density method
A. Mardani-Aghabaglou (2013)



This paper is referenced by
10.1155/2021/5567873
Durability Evaluation of Concrete with Multiadmixtures under Salt Freeze-Thaw Cycles Based on Surface Resistivity
Shibin Luo (2021)
10.1007/s11356-021-13918-2
Investigating embodied carbon, mechanical properties, and durability of high-performance concrete using ternary and quaternary blends of metakaolin, nano-silica, and fly ash
Rabinder Kumar (2021)
10.1016/J.CONBUILDMAT.2021.122628
Improving the sulfate attack resistance of concrete by using supplementary cementitious materials (SCMs): A review
Manjur A Elahi (2021)
10.1061/(ASCE)MT.1943-5533.0003658
Physical and Mechanical Properties of Treated Recycled Aggregate Concretes: Combination of Mechanical Treatment and Silica Fume
H. Dilbas (2021)
10.1016/J.CONBUILDMAT.2021.122345
Advances on properties of fiber reinforced recycled aggregate concrete: Experiments and models
Jing Xie (2021)
10.1016/J.MATPR.2021.04.291
Strength and microstructural analysis of nano-silica based cement composites in presence of silica fume
Rishav Garg (2021)
10.1016/J.COMPOSITESB.2021.108636
Recent progress of utilization of activated kaolinitic clay in cementitious construction materials
Yubin Cao (2021)
10.1007/S00521-021-06004-8
Prediction of cement-based mortars compressive strength using machine learning techniques
P. G. Asteris (2021)
10.3390/ma14071752
A Research on Durability Degradation of Mineral Admixture Concrete
Xupeng Chen (2021)
10.1007/978-3-030-63879-5_11
The Influence of Grinding Method on the Particle Size Distribution of Selected Waste Materials Used in Concrete Technology
A. Kaleta-Jurowska (2021)
10.1061/(ASCE)MT.1943-5533.0003603
Effect of Side Chain Length Change of Polycarboxylate-Ether–Based High-Range Water–Reducing Admixture on Properties of Cementitious Systems Containing Fly Ash
Muhammet Gökhan Altun (2021)
10.1016/J.CONBUILDMAT.2021.122789
Enhancement of pozzolanic activity of calcined clays by limestone powder addition
G. Argın (2021)
10.1016/J.POWTEC.2021.04.029
Roles of packing density and slurry film thickness in synergistic effects of metakaolin and silica fume
S. Chu (2021)
10.1080/01694243.2020.1870083
Influence of nano-cementitious materials on improving the corrosion resistance and microstructure characteristics of concrete
T. Kiran (2021)
10.1155/2021/5572011
Investigation on Durability Behaviour and Optimization of Concrete with Triple-Admixtures Subjected to Freeze-Thaw Cycles in Salt Solution
Xuejiao Li (2021)
10.20334/2021-032-M
Dispersiškai armuoto apdailinio betono technologinių ir eksploatacinių savybių tyrimai
Rimvydas Moceikis (2021)
10.1016/J.CEMCONCOMP.2021.104086
Exploring sulphate resistance of coal mining waste blended cements through experiments and thermodynamic modelling
Laura Caneda-Martínez (2021)
10.51983/ajeat-2021.10.1.2722
Zero Cement Concrete with Self-Curing Technology: An Overview
N. Anuja (2021)
10.1007/s00500-021-05626-3
Surrogate models for the compressive strength mapping of cement mortar materials
P. G. Asteris (2021)
10.1016/j.conbuildmat.2020.121776
Durability properties of treated recycled aggregate concrete: Effect of optimized ball mill method
Ö. Çakır (2021)
10.3390/ma14040907
Mineral Addition and Mixing Methods Effect on Recycled Aggregate Concrete
H. Dilbas (2021)
10.1016/j.conbuildmat.2019.117223
Performance assessment of concrete incorporating recycled coarse aggregates and metakaolin: A systematic approach
R. Muduli (2020)
10.1016/j.conbuildmat.2019.117062
Experimental investigation on effects of calcined bentonite on fresh, strength and durability properties of sustainable self-compacting concrete
Z. Laidani (2020)
10.1007/s00521-020-05244-4
A comparative study of ANN and ANFIS models for the prediction of cement-based mortar materials compressive strength
D. J. Armaghani (2020)
10.1016/j.conbuildmat.2020.118027
Genetic programming based formulation for compressive and flexural strength of cement mortar containing nano and micro silica after freeze and thaw cycles
S. Emamian (2020)
10.1016/j.matpr.2020.06.167
Experimental study on strength and microstructure of mortar in presence of micro and nano-silica
Rishav Garg (2020)
Mineral katkı kullanımının hava sürükleyici katkılı çimentolu harçların taze ve sertleşmiş hal özeliklerine etkisi
Ece Güleryüz (2020)
10.1680/jcoma.20.00025
Strength and hydration of metakaolin-containing ultra-high-performance paste
Zongyun Mo (2020)
10.3390/su12093888
Utilization of By-Products and Wastes as Supplementary Cementitious Materials in Structural Mortar for Sustainable Construction
Shamir Sakir (2020)
10.1007/s11356-020-10507-7
Characterization of sewage sludge incineration ashes from multi-cyclones and baghouse dust filters as possible cement substitutes
G. Salihoglu (2020)
10.1016/J.CONBUILDMAT.2020.120846
Effect of processed sugar cane bagasse ash on mechanical and fracture properties of blended mortar
P. Jagadesh (2020)
10.1016/j.conbuildmat.2020.118866
Performance comparison of cement replacing materials in concrete: Limestone fillers and supplementary cementing materials – A review
D. Panesar (2020)
See more
Semantic Scholar Logo Some data provided by SemanticScholar