Online citations, reference lists, and bibliographies.
← Back to Search

Surface Treatments Of Titanium Dental Implants For Rapid Osseointegration.

Laurent Le Guéhennec, A. Soueidan, P. Layrolle, Y. Amouriq
Published 2007 · Materials Science, Medicine

Save to my Library
Download PDF
Analyze on Scholarcy
Share
The osseointegration rate of titanium dental implants is related to their composition and surface roughness. Rough-surfaced implants favor both bone anchoring and biomechanical stability. Osteoconductive calcium phosphate coatings promote bone healing and apposition, leading to the rapid biological fixation of implants. The different methods used for increasing surface roughness or applying osteoconductive coatings to titanium dental implants are reviewed. Surface treatments, such as titanium plasma-spraying, grit-blasting, acid-etching, anodization or calcium phosphate coatings, and their corresponding surface morphologies and properties are described. Most of these surfaces are commercially available and have proven clinical efficacy (>95% over 5 years). The precise role of surface chemistry and topography on the early events in dental implant osseointegration remain poorly understood. In addition, comparative clinical studies with different implant surfaces are rarely performed. The future of dental implantology should aim to develop surfaces with controlled and standardized topography or chemistry. This approach will be the only way to understand the interactions between proteins, cells and tissues, and implant surfaces. The local release of bone stimulating or resorptive drugs in the peri-implant region may also respond to difficult clinical situations with poor bone quality and quantity. These therapeutic strategies should ultimately enhance the osseointegration process of dental implants for their immediate loading and long-term success.
This paper references
10.1007/978-0-387-77718-4
Thin Calcium Phosphate Coatings for Medical Implants
K. D. Groot (2009)
10.1016/J.COLSURFB.2004.08.002
Surface free energy and bacterial retention to saliva-coated dental implant materials--an in vitro study.
Florence Mabboux (2004)
10.1111/J.1708-8208.2002.TB00169.X
RhBMP-2/alphaBSM induces significant vertical alveolar ridge augmentation and dental implant osseointegration.
U. Wikesjö (2002)
10.1016/S0142-9612(00)00234-9
Immobilization of bisphosphonates on surface modified titanium.
M. Yoshinari (2001)
10.1243/0954411981533917
Calcium phosphate coatings for medical implants
K. de Groot (1998)
10.1097/01.ID.0000075580.55380.E5
Radiographic Evaluation of Dental Implants with Different Surface Treatments: An Experimental Study in Dogs
Mário Taba (2003)
10.1111/J.1600-0501.2004.01086.X
Bone formation at titanium porous oxide (TiUnite) oral implants in type IV bone.
Yi-Hao Huang (2005)
10.1111/J.1532-849X.2001.00002.X
A prospective 5-year study of fixed partial prostheses supported by implants with machined and TiO2-blasted surface.
K. Gotfredsen (2001)
10.1023/A:1022842404495
Current state of the art of biphasic calcium phosphate bioceramics
G. Daculsi (2003)
10.1016/S0142-9612(01)00059-X
Effect of chemical composition on hydrophobicity and zeta potential of plasma sprayed HA/CaO-P2O5 glass coatings.
M. Ferraz (2001)
10.1111/J.1708-8208.2000.TB00007.X
A prospective multicenter clinical trial comparing one- and two-stage titanium screw-shaped fixtures with one-stage plasma-sprayed solid-screw fixtures.
W. Becker (2000)
10.1002/JBM.820291213
Effect of surface topology on the osseointegration of implant materials in trabecular bone.
M. Wong (1995)
10.1034/J.1600-0501.2001.012002128.X
Histologic evaluation of the bone integration of TiO(2) blasted and turned titanium microimplants in humans.
C. Ivanoff (2001)
10.1034/J.1600-0501.2000.011003202.X
A prospective split-mouth comparative study of two screw-shaped self-tapping pure titanium implant systems.
D. van Steenberghe (2000)
10.1111/J.1151-2916.2002.TB00126.X
Biomimetic Hydroxyapatite Coating on Metal Implants
P. Habibović (2004)
10.1034/J.1600-0501.2001.012002159.X
A comparison of hydroxylapatite coated implant retained fixed and removable mandibular prostheses over 4 to 6 years.
D. Tinsley (2001)
10.3109/17453678108991776
Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man.
T. Albrektsson (1981)
10.1016/S0142-9612(03)00626-4
Preparation of bioactive titanium metal via anodic oxidation treatment.
Bangcheng Yang (2004)
Bone-implant contact and bone quality: evaluation of expected and actual bone contact on machined and osseotite implant surfaces.
P. Trisi (2002)
10.1002/JBM.A.30320
High surface energy enhances cell response to titanium substrate microstructure.
G. Zhao (2005)
Apatite coating on various substrates in simulated body fluids
T Kokubo (1989)
10.1111/J.1600-0501.2005.01101.X
Oxidized titanium implants (Nobel Biocare TiUnite) compared with turned titanium implants (Nobel Biocare mark III) with respect to implant failure in a group of consecutive patients treated with early functional loading and two-stage protocol.
M. Jungner (2005)
10.1177/154405910408300704
Enhanced Bone Apposition to a Chemically Modified SLA Titanium Surface
D. Buser (2004)
10.1034/J.1600-0501.1995.060103.X
A histomorghometric study of screw‐shaped and removal torque titanium implants with three different surface topographies
A. Wennerberg (1995)
10.1038/sj.gt.3302439
Bone regeneration in a rat cranial defect with delivery of PEI-condensed plasmid DNA encoding for bone morphogenetic protein-4 (BMP-4)
Y. Huang (2005)
10.1023/A:1012837905910
Oxidized implants and their influence on the bone response
Y. Sul (2001)
10.1016/J.BIOMATERIALS.2003.09.063
Nano-scale study of the nucleation and growth of calcium phosphate coating on titanium implants.
F. Barrère (2004)
845 3.1. Roughening of implants by titanium plasma-spraying
10.1034/J.1600-0501.2003.00791.X
Evaluation of the interface between bone and titanium surfaces being blasted by aluminium oxide or bioceramic particles.
Wolf-Dieter Müeller (2003)
10.1067/MPR.2001.112415
Evaluation of a predictive model for implant surface topography effects on early osseointegration in the rat tibia model.
A. Abron (2001)
10.1007/978-1-4612-4774-6_2
A Mathematical Model
C. Weber (1987)
10.1111/J.1600-0501.2004.00995.X
Influence of implant microstructure on the dynamics of bone healing around immediate implants placed into periodontally infected sites. A confocal laser scanning microscopic study.
V. Papalexiou (2004)
10.1016/S0142-9612(01)00307-6
Qualitative and quantitative observations of bone tissue reactions to anodised implants.
Y. Sul (2002)
10.1034/J.1600-0501.2000.011006530.X
Red blood cell and platelet interactions with titanium implant surfaces.
J. Park (2000)
The impact of oral implants - past and future, 1966-2042.
T. Albrektsson (2005)
10.1097/00008505-199700610-00042
Eight-year clinical retrospective study of titanium plasma-sprayed and hydroxyapatite-coated cylinder implants.
S. L. Wheeler (1996)
A prospective split-mouth comparative study of two 3 ( 2 0 0 7 ) 844–854 screw-shaped self-tapping pure titanium implant systems
D van Steenberghe (2000)
Hydroxyapatite deposition by electrophoresis on titanium sheets with different surface finishing.
Lídia Agata De Sena (2002)
10.1016/S0142-9612(03)00218-7
The removal torque of titanium screw inserted in rabbit tibia treated by dual acid etching.
Sung-Am Cho (2003)
10.1111/J.1708-8208.1999.TB00087.X
Astra Tech and Brånemark System implants: a prospective 5-year comparative study. Results after one year.
P. Astrand (1999)
10.1034/J.1600-0501.2001.120604.X
Early loading of sandblasted and acid-etched (SLA) implants: a prospective split-mouth comparative study.
M. Roccuzzo (2001)
10.1046/J.1600-0501.2003.00968.X
Influence of implant microstructure on the osseointegration of immediate implants placed in periodontally infected sites. A histomorphometric study in dogs.
A. Novaes (2004)
10.1023/A:1015170625506
Comparative investigation of the surface properties of commercial titanium dental implants. Part I: chemical composition
C. Massaro (2002)
10.1055/S-2008-1064831
Osseointegrated Titanium Implants
G. Holt (1986)
10.1002/JBM.820291009
Anchorage of TiO2-blasted, HA-coated, and machined implants: an experimental study with rabbits.
K. Gotfredsen (1995)
10.1111/J.1708-8208.2003.TB00016.X
Immediate loading of Brånemark System TiUnite and machined-surface implants in the posterior mandible: a randomized open-ended clinical trial.
A. Rocci (2003)
10.1016/S0142-9612(02)00508-2
Detachment of titanium and fluorohydroxyapatite particles in unloaded endosseous implants.
D. Martini (2003)
Bone response to plasma-cleaned titanium implants.
L. Carlsson (1989)
Histomorphometric analysis of the bone-implant contact obtained with 4 different implant surface treatments placed side by side in the dog mandible.
A. Novaes (2002)
Roughness response genes in osteoblasts. Bone 2004;35:124–33
PM Brett (2004)
10.1053/JOMS.2000.18269
Survival of hydroxyapatite-coated implants: a meta-analytic review.
J. Lee (2000)
A prospective multicenter clinical study of the Osseotite implant: four-year interim report.
T. Testori (2001)
10.1097/00008505-199700610-00042
Eight-year clinical retrospective study of titanium plasma-sprayed and hydroxyapatite-coated cylinder implants.
Wheeler Sl (1996)
10.1143/JJAP.32.L1577
Deposition of calcium phosphate on titanium by electrochemical process in simulated body fluid
S. Ban (1993)
Influence of implant geometry and surface characteristics on progressive osseointegration.
N. Geurs (2002)
Red blood cell and platelet interactions with titanium implant
JY Park (2000)
10.1016/J.BIOMATERIALS.2004.02.072
The bisphosphonate pamidronate on the surface of titanium stimulates bone formation around tibial implants in rats.
H. Kajiwara (2005)
10.1016/S0142-9612(02)00314-9
Corrosion behaviour of commercially pure titanium shot blasted with different materials and sizes of shot particles for dental implant applications.
C. Aparicio (2003)
Bone-to-implant apposition with machined and MTX microtextured implant surfaces in human sinus grafts.
P. Trisi (2003)
10.1016/J.BONE.2005.02.005
BMP-2 liberated from biomimetic implant coatings induces and sustains direct ossification in an ectopic rat model.
Y. Liu (2005)
10.1016/J.BONE.2004.10.004
Calcium phosphate drug delivery system: influence of local zoledronate release on bone implant osteointegration.
B. Peter (2005)
10.1016/S0021-9290(99)00058-5
The relation between surface roughness and interfacial shear strength for bone-anchored implants. A mathematical model.
S. Hansson (1999)
10.1902/ANNALS.2000.5.1.56
Periodontal-type measurements associated with hydroxyapatite-coated and non-HA-coated implants: uncovering to 36 months.
H. Morris (2000)
Glow discharge pre-treated implants combined with temporary bone ischaemia
A Wennerberg (1991)
10.1002/(SICI)1097-4636(199804)40:1<1::AID-JBM1>3.0.CO;2-Q
Bone response to unloaded and loaded titanium implants with a sandblasted and acid-etched surface: a histometric study in the canine mandible.
D. Cochran (1998)
10.1902/JOP.1999.70.2.151
Use of alendronate in peri-implant defect regeneration.
S. Meraw (1999)
10.1016/J.BIOMATERIALS.2004.02.026
Biological performance of uncoated and octacalcium phosphate-coated Ti6Al4V.
P. Habibović (2005)
10.1002/JBM.B.10057
Osteointegration of biomimetic apatite coating applied onto dense and porous metal implants in femurs of goats.
F. Barrère (2003)
10.1177/154405910408300405
Preparation and Characterization of Electrodeposited Calcium Phosphate/Chitosan Coating on Ti6Al4V Plates
J. Wang (2004)
10.1016/S0142-9612(01)00271-X
Improvement in the morphology of Ti-based surfaces: a new process to increase in vitro human osteoblast response.
M. Bigerelle (2002)
10.1097/01.ID.0000127520.06443.42
Demonstration of the Osseoinductive Effect of Bone Morphogenetic Protein Within Endosseous Dental Implants
P. Boyne (2004)
Calcium phosphates in plasma-sprayed HA coatings
RZ LeGeros (1995)
10.1016/S0142-9612(99)00200-8
Effect of mechanical surface pretreatment on metal ion release.
M. Browne (2000)
10.1034/J.1600-0501.2002.130204.X
The use of reduced healing times on ITI implants with a sandblasted and acid-etched (SLA) surface: early results from clinical trials on ITI SLA implants.
D. Cochran (2002)
10.1563/1548-1336(2002)028<0002:BRTMAR>2.3.CO;2
Bone response to machined and resorbable blast material titanium implants: an experimental study in rabbits.
M. Piattelli (2002)
10.2106/00004623-200004000-00002
Dissemination of Wear Particles to the Liver, Spleen, and Abdominal Lymph Nodes of Patients with Hip or Knee Replacement*
R. Urban (2000)
10.1016/S0142-9612(01)00380-5
Fracture mechanisms of retrieved titanium screw thread in dental implant.
K. Yokoyama (2002)
10.1034/J.1600-0765.2002.00021.X
Peri-implant bone regeneration using recombinant human bone morphogenetic protein-2 in a canine model: a dose-response study.
D. Tatakis (2002)
10.1016/J.BIOMATERIALS.2003.11.053
Evaluation of titanium plasma-sprayed and plasma-sprayed hydroxyapatite implants in vivo.
J. Ong (2004)
10.1016/J.BIOMATERIALS.2005.07.009
Fluoride modification effects on osteoblast behavior and bone formation at TiO2 grit-blasted c.p. titanium endosseous implants.
L. Cooper (2006)
Oxidized titanium screws coated with calcium ions and their performance in rabbit bone.
Y. Sul (2002)
10.1111/J.1600-0501.2005.01126.X
Bone-implant contact at calcium phosphate-coated and porous titanium oxide (TiUnite)-modified oral implants.
A. Xiropaidis (2005)
Plasma spraying induced changes of calcium phosphate ceramic characteristics and the effect on in vitro
S Radin (1992)
Characterization of commercial HA-coated implants
Y Kim (1994)
10.1002/JBM.820251004
Characterization of the interface in the plasma-sprayed HA coating/Ti-6Al-4V implant system.
M. Filiaggi (1991)
10.1034/J.1600-0501.2003.00861.X
Failure to induce supracrestal bone growth between and around partially inserted titanium implants using bone morphogenetic protein (BMP): an experimental study in dogs.
V. Stenport (2003)
10.1016/S0278-2391(99)90333-6
Biomechanical and morphometric analysis of hydroxyapatite-coated implants with varying crystallinity.
Y. Chang (1999)
10.1159/000081089
Cellular Reactions of Osteoblasts to Micron- and Submicron-Scale Porous Structures of Titanium Surfaces
X. Zhu (2004)
10.1007/BF00702942
Plasma spraying induced changes of calcium phosphate ceramic characteristics and the effect onin vitro stability
S. Radin (1992)
Improved retention and bone-tolmplant contact with fluoride-modified titanium implants.
J. Ellingsen (2004)
10.1023/B:JMSM.0000042679.28493.7F
Surface treatments and roughness properties of Ti-based biomaterials
A. Bagno (2004)
10.1111/J.1708-8208.2005.TB00073.X
The human bone-oxidized titanium implant interface: A light microscopic, scanning electron microscopic, back-scatter scanning electron microscopic, and energy-dispersive x-ray study of clinically retrieved dental implants.
P. Schüpbach (2005)
10.1111/J.1708-8208.2004.TB00032.X
Biomechanical measurements of calcium-incorporated oxidized implants in rabbit bone: effect of calcium surface chemistry of a novel implant.
Y. Sul (2004)
10.1111/J.1600-0757.1998.TB00119.X
Titanium--the material of choice?
S. Steinemann (1998)
10.1016/J.BONE.2004.03.009
Roughness response genes in osteoblasts.
P. Brett (2004)
State of the art: hydroxylapatite coatings for dental implants
K De Groot (1994)
10.1002/JBM.820250708
Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs.
D. Buser (1991)
10.1902/JOP.2003.74.5.658
Guided bone regeneration around titanium plasma-sprayed, acid-etched, and hydroxyapatite-coated implants in the canine model.
K. Conner (2003)
A histomorphometric and removal torque study of screw-shaped titanium implants with three different surface topographies.
A. Wennerberg (1995)
10.1034/J.1600-0501.1999.100304.X
BMP stimulation of bone response adjacent to titanium implants in vivo.
K. Bessho (1999)
Survival of hydroxypatite-coated implants: a meta-analytic review
J Lee (2000)
10.1034/J.1600-0501.1998.090102.X
A histomorphometric evaluation of screw-shaped implants each prepared with two surface roughnesses.
A. Wennerberg (1998)
Mechanisms of endosseous integration.
J. Davies (1998)
10.1902/JOP.1999.70.10.1228
Qualitative analysis of peripheral peri-implant bone and influence of alendronate sodium on early bone regeneration.
S. Meraw (1999)
10.1016/J.BIOMATERIALS.2003.09.111
Time-dependent morphology and adhesion of osteoblastic cells on titanium model surfaces featuring scale-resolved topography.
O. Zinger (2004)
10.1111/J.1708-8208.2001.TB00123.X
Effects of implant design and surface on bone regeneration and implant stability: an experimental study in the dog mandible.
L. Rasmusson (2001)
Comparative investigation of the surface of commercial titanium dental implants. Part 1: chemical composition
C Massaro (2002)
10.1002/14651858.cd003815
Interventions for replacing missing teeth: different types of dental implants.
M. Esposito (2007)
10.1002/J.0022-0337.2003.67.8.TB03681.X
Understanding peri-implant endosseous healing.
J. Davies (2003)
10.1016/S0142-9612(02)00548-3
Mechanical and histomorphometric evaluations of titanium implants with different surface treatments inserted in sheep cortical bone.
G. Giavaresi (2003)
10.1016/S0142-9612(03)00357-0
Apatite deposition on thermally and anodically oxidized titanium surfaces in a simulated body fluid.
X. Wang (2003)
Optimum surface properties of oxidized implants for reinforcement of osseointegration: surface chemistry, oxide thickness, porosity, roughness, and crystal structure.
Y. Sul (2005)
A prospective multicenter clinical trial comparing l s 2 852 d e n t a l m a t e r i a one- and two-stage titanium screw-shaped fixtures with one-stage plasma-sprayed solid-screw fixtures
W Becker (2000)
10.1002/ADMA.200306340
Chemically Modified Calcium Phosphates as Novel Materials for Bisphosphonate Delivery
S. Josse (2004)
10.1007/BF00134312
Pre-treatment of titanium implants with fluoride improves their retention in bone
J. Ellingsen (1995)
10.1002/JBM.10101
Effect of grooved titanium substratum on human osteoblastic cell growth.
K. Anselme (2002)
10.1034/J.1600-0501.2002.130304.X
Resonance frequency and removal torque analysis of implants with turned and anodized surface oxides.
Y. Sul (2002)
10.1902/JOP.2003.74.7.945
Bone-implant contact on machined and dual acid-etched surfaces after 2 months of healing in the human maxilla.
P. Trisi (2003)
Glow-discharge pretreated implants combined with temporary bone tissue ischemia.
A. Wennerberg (1991)
10.1002/1097-4636(200108)56:2<208::AID-JBM1085>3.0.CO;2-R
Osteoclastic resorption of biomimetic calcium phosphate coatings in vitro.
S. Leeuwenburgh (2001)
10.1111/J.1708-8208.2005.TB00045.X
A 10-year follow-up study of titanium dioxide-blasted implants.
L. Rasmusson (2005)
10.1002/JBM.A.10291
In vitro and in vivo degradation of biomimetic octacalcium phosphate and carbonate apatite coatings on titanium implants.
F. Barrère (2003)



This paper is referenced by
10.1038/sj.ebd.6400990
Radiotherapy associated with higher rates of dental implant loss
Andrew MacInnes (2014)
10.1007/s00784-018-2736-z
Macrophage behavior and interplay with gingival fibroblasts cultured on six commercially available titanium, zirconium, and titanium-zirconium dental implants
Y. Wang (2018)
10.11606/T.5.2009.TDE-25062009-091512
Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma
J. S. D. Silva (2008)
10.31274/etd-180810-2393
Methods for increasing customization in rapid machining patient-specific bone implants
S. M. Spencer (2011)
Surface Treatments of Implant: A Review
Rohit Raghavan (2020)
10.1111/j.1600-0501.2010.02009.x
Influence on early osseointegration of dental implants installed with two different drilling protocols: a histomorphometric study in rabbit.
J. Blanco (2011)
10.1016/J.APSUSC.2010.05.024
Fabrication of hydroxyapatite and TiO2 nanorods on microarc-oxidized titanium surface using hydrothermal treatment
H. Song (2010)
10.1016/J.WEAR.2011.05.018
Numerical characterisation of biomedical titanium surface texture using novel feature parameters
J. Wang (2011)
10.1016/J.APSUSC.2015.12.022
Osseointegration properties of titanium dental implants modified with a nanostructured coating based on ordered porous silica and bioactive glass nanoparticles
Cristian Covarrubias (2016)
AVALIAÇÃO “IN VITRO” DA VIABILIDADE, ADESÃO E SÍNTESE DE CITOCINAS EM OSTEOBLASTOS HUMANOS CULTIVADOS SOBRE DIFERENTES SUPERFÍCIES DE TITÂNIO
Fernanda Faria Resende (2014)
10.1039/c9tb02882j
The synergistic promotion of osseointegration by nanostructure design and silicon substitution of hydroxyapatite coatings in a diabetic model.
L. Liu (2020)
10.1016/j.msec.2014.07.026
Fabrication of porous titanium scaffolds by stack sintering of microporous titanium spheres produced with centrifugal granulation technology.
H. Chen (2014)
The response of SV-HFO cells to Ti6Al7Nb surfaces modified by Plasma Electrolytic Oxidation
N. D. Groot (2012)
Cátia Sofia Almeida Cardoso
Cátia Sofia Almeida Cardoso (2011)
10.1117/12.2560437
Optical and thermal imaging analysis of the kinetics of one- and two-cycle induction treatment of titanium products
A. Shchelkunov (2020)
10.1097/ID.0000000000000161
Significance of Osteogenic Surface Coatings on Implants to Enhance Osseointegration Under Osteoporotic-like Conditions
F. Javed (2014)
10.1007/s10856-012-4596-4
Surface modification of titanium by hydrothermal treatment in Mg-containing solution and early osteoblast responses
Xingling Shi (2012)
10.1016/j.colsurfb.2011.08.020
The influence of UV irradiation on the biological properties of MAO-formed ZrO2.
Z. Zhang (2012)
10.1016/j.colsurfb.2013.01.023
Enhanced osteoblastic cell response on zirconia by bio-inspired surface modification.
Y. Liu (2013)
10.1111/clr.12973
A comparative evaluation between aluminium and titanium dioxide microparticles for blasting the surface titanium dental implants: an experimental study in rabbits
S. Gehrke (2018)
10.1002/jbm.a.36570
RGD-modified dihydrolipoamide dehydrogenase as a molecular bridge for enhancing the adhesion of bone forming cells to titanium dioxide implant surfaces.
Avraham Dayan (2019)
10.1080/21691401.2018.1513940
Chitosan-gold nanoparticles mediated gene delivery of c-myb facilitates osseointegration of dental implants in ovariectomized rat
Jyoti Shrestha Takanche (2018)
ESTUDO DO EFEITO DA DENSIDADE DE CORRENTE NO PROCESSO DE OBTENÇÃO DE SUPERFÍCIES NANOESTRUTURADAS DE TITÂNIO
L. M. Antonini (2014)
10.1002/jbm.b.32974
Bioactive plasma electrolytic oxidation coatings--the role of the composition, microstructure, and electrochemical stability.
M. Mohedano (2013)
10.1371/journal.pone.0149051
Correction: Effect of Pore Size and Porosity on the Biomechanical Properties and Cytocompatibility of Porous NiTi Alloys
Yu-tao Jian (2016)
10.1016/J.SURFCOAT.2012.11.021
Oxygen diffusion hardening of tantalum coatings on cp-titanium for biomedical applications
T. Schmitz (2013)
10.7213/AOR.V3I3.23120
OSSEOINTEGRATION EVALUATION OF TREATED SURFACES OF TITANIUM IMPLANTS APPLYING TENSILE PULL OUT TEST Avaliação da osseointegração de superfícies modificadas de implantes de titânio por meio de teste mecânico de pull out
R. P. Renz (2007)
10.14815/KJDM.2016.43.4.351
Inhibitory Mechanism of TiO2 Nanotubular Structures in Osteoclast Formation Via Coculture
Seunghan Oh (2016)
10.2147/IJN.S181137
Polydopamine-induced hydroxyapatite coating facilitates hydroxyapatite/polyamide 66 implant osteogenesis: an in vitro and in vivo evaluation
Y. Xu (2018)
Evaluation of the effect of Two-Step Acid Etching on the Surface Treatment and Improved Bioactivity of Nitinol
M. Yousefpour (2016)
10.4103/IJDS.IJDS_26_19
Nanoparticles: A promising novel adjunct for dentistry
Jagat Bhushan (2019)
10.4012/dmj.2018-296
Cytotoxicity of hydroxyapatite-tyrosine complex with gray titania coating on titanium alloy surface to L929 mouse fibroblasts.
Kanda Leelanarathiwat (2019)
See more
Semantic Scholar Logo Some data provided by SemanticScholar