Online citations, reference lists, and bibliographies.
← Back to Search

Synthesis Of ZnO Nanoparticles And Studying Its Influence On The Antimicrobial, Anticorrosion And Mechanical Behavior Of Polyurethane Composite For Surface Coating

A. Saeed, M. A. El-Fattah, A. Azzam
Published 2015 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
Zinc oxide nanoparticles (ZnO NPs) were obtained by a direct precipitation method. The TEM photograph demonstrated that the synthesized ZnO NPs were of a pseudo-spherical shape and the average diameter of the particles is 20.0 nm. ZnO polyurethane nanocomposite (ZPN) coating films were fabricated by uniformly dispersing ZnO NPs in varying loading levels 0.1 to 2.0 wt.% in commercial two component polyurethane by ultrasonication. The antimicrobial activity of ZPN coating films was screened against Gram-negative and Gram-positive bacteria. Corrosion performance, physical and mechanical properties of ZPN coating films was evaluated. The resulting perfect dispersion of ZnO NPs in polyurethane coating was revealed by SEM. The results showed slowdown, the growth of organisms on the ZPN coating surface, and also showed an improvement in the corrosion resistance, mechanical resistance at lower concentration, and this improvement increases with increase ZnO NPs wt.%.
This paper references
10.1016/S0300-9440(03)00127-9
Enhancing coating functionality using nanoscience and nanotechnology
D. R. Baer (2003)
10.1007/S10853-006-7457-Z
Zinc oxide: hydrothermal growth of nano- and bulk crystals and their luminescent properties
L. N. Dem’yanets (2006)
10.1016/J.APT.2012.08.005
Low temperature dielectric studies of zinc oxide (ZnO) nanoparticles prepared by precipitation method
Amrut S. Lanje (2013)
10.1016/J.PORGCOAT.2005.01.003
Effects of P/B on the properties of anticorrosive coatings with different particle size
L. Yang (2005)
10.1021/NL052326H
Toxicological impact studies based on Escherichia coli bacteria in ultrafine ZnO nanoparticles colloidal medium.
R. Brayner (2006)
10.1080/03602550701575789
Preparation and Characterization of Polyurethane/ZnO Nanoparticle Composites
Chuangqi Guo (2007)
10.1007/S11998-007-9002-7
Shear-induced 1-D alignment of alumina nanoparticles in coatings
Lucas J. Brickweg (2007)
10.1016/S0300-9440(02)00085-1
The change of the properties of acrylic-based polyurethane via addition of nano-silica
Shuxue Zhou (2002)
10.1023/A:1020121700825
Degradation Studies of Polyolefins Incorporating Transparent Nanoparticulate Zinc Oxide UV Stabilizers
A. Ammala (2002)
10.1016/J.APSUSC.2014.07.022
The heat resistance of a polyurethane coating filled with modified nano-CaCO 3
B. Li (2014)
10.1016/J.CEJ.2008.07.047
Synthesis and characterization of nano-sized ZnO powders by direct precipitation method
C. Chen (2008)
10.1016/J.POLYMER.2005.08.082
Disruption of self-assembly and altered mechanical behavior in polyurethane/zinc oxide nanocomposites
J. Zheng (2005)
10.1007/S10853-011-5273-6
Controlled mechanochemically assisted synthesis of ZnO nanopowders in the presence of oxalic acid
A. Stanković (2011)
10.1016/J.POLYMER.2004.04.009
Effect of silica nanoparticles on morphology of segmented polyurethanes
Z. S. Petrović (2004)
10.1007/978-3-642-34243-1_1
Contact Angle and Wetting Properties
Yuehua Yuan (2013)
10.1155/2012/656353
Structural characterisation of ZnO particles obtained by the emulsion precipitation method
A. Kołodziejczak-Radzimska (2012)
10.1002/PEN.20170
Effects of ZnO nano particles on thermal stabilization of polymers
K. S. Cho (2004)
10.1016/J.CARBPOL.2003.07.009
Study on antimicrobial activity of chitosan with different molecular weights
lian-ying Zheng (2003)
10.1016/j.jcis.2009.02.029
Synthesis and morphology control of ZnO nanostructures in microemulsions.
X. Li (2009)
10.1002/APP.11624
Effect of nanosilica on the properties of polyester‐based polyurethane
Shuxue Zhou (2003)
10.1016/J.JALLCOM.2005.01.045
Sol–gel synthesis and characterization of nanocrystalline ZnO powders
M. Ristic (2005)
10.1016/J.PORGCOAT.2014.09.019
Synthesis and characterization of titanium oxide nanotubes and its performance in epoxy nanocomposite coating
A. Saeed (2015)
10.1016/J.PORGCOAT.2007.01.018
Investigating the variations in properties of 2-pack polyurethane clear coat through separate incorporation of hydrophilic and hydrophobic nano-silica
M. Jalili (2007)
10.1016/J.PORGCOAT.2008.07.007
Effect of nano-ZnO addition on the silicone-modified alkyd-based waterborne coatings on its mechanical and heat-resistance properties
S. K. Dhoke (2009)
10.1016/J.POLYMDEGRADSTAB.2003.09.024
Degradation and stabilisation of polymers and coatings: nano versus pigmentary titania particles
N. S. Allen (2004)
10.1080/15533174.2012.680119
Influences of Urea on Preparation of Zinc Oxide Nanostructures Through Chemical Precipitation in Ammonium Hydrogencarbonate Solution
Z. M. Khoshhesab (2012)
10.1016/S0300-9440(03)00022-5
Effects of particle sizes and shapes of zinc metal on the properties of anticorrosive coatings
A. Kalendová (2003)
Effects of nano pigments on the corrosion resistance of alkyd coating
H. Shi (2007)
10.1016/J.PORGCOAT.2008.07.023
“Effect of nano-ZnO particles on the corrosion behavior of alkyd-based waterborne coatings”
S. K. Dhoke (2009)
10.1016/j.corsci.2008.09.028
Effect of nano-Fe2O3 particles on the corrosion behavior of alkyd based waterborne coatings
S. K. Dhoke (2009)
10.1016/J.COMPSCITECH.2006.10.027
Comparative study of the effect of different nanoparticles on the mechanical properties and thermal degradation mechanism of in situ prepared poly(ε-caprolactone) nanocomposites
K. Chrissafis (2007)
10.1088/1742-6596/26/1/075
ZnO Nanoparticles Synthesised by mechanochemical processing
R. Aghababazadeh (2006)
Nanomaterial technology applications in coatings
R. Fernando (2004)
10.1016/j.chemosphere.2007.11.047
Toxicity of nanosized and bulk ZnO, CuO and TiO2 to bacteria Vibrio fischeri and crustaceans Daphnia magna and Thamnocephalus platyurus.
M. Heinlaan (2008)



This paper is referenced by
10.1016/J.CES.2018.06.049
The effect of anionic-cationic multilayering and microstructure on dye-based ink absorption
Katriina Mielonen (2018)
10.1016/J.PHYSE.2016.08.029
Effect of the reaction conditions on the formation of the ZnO nanostructures
P. Perillo (2017)
10.1016/j.jallcom.2020.155078
Influence of Zn concentration on zinc oxide nanoparticles and their anti-corrosion property
R. Aboorvakani (2020)
The Use of Metal and Metal Oxide Nanoparticles Against Biofilms
Jyoti Tejpal (2016)
10.1002/PC.24291
Alkyd‐clay nanocomposites for improved anticorrosion and mechanical performance of coating
Priyanka G. Dhirde (2018)
10.1007/s40097-018-0290-5
Preparation of PANI–CuZnO ternary nanocomposite and investigation of its effects on polyurethane coatings antibacterial, antistatic, and mechanical properties
A. Mirmohseni (2018)
10.1007/s11998-017-9958-x
Effective incorporation of ZnO nanoparticles by miniemulsion polymerization in waterborne binders for steel corrosion protection
Stefano Chimenti (2017)
10.1016/J.SEPPUR.2018.01.061
Nanoparticles in household level water treatment: An overview
T. Prathna (2018)
10.1007/s11998-018-0061-8
High-performance one-pack ambient cross-linking latex binders containing low-generation PAMAM dendrimers and ZnO nanoparticles
J. Machotová (2018)
10.1016/J.EURPOLYMJ.2016.10.021
Development of epoxy-urethane hybrid coatings via non-isocyanate route
Kunal Wazarkar (2016)
10.1016/J.COMPSCITECH.2015.12.016
The interface designing and reinforced features of wood fiber/polypropylene composites: Wood fiber adopting nano-zinc-oxide-coating via ion assembly
X. Ye (2016)
10.1016/J.DYEPIG.2018.07.057
In-situ bonding technology and excellent anticorrosion activity of graphene oxide / hydroxyapatite nanocomposite pigment
Xi-Zi Xue (2019)
10.1002/MACO.201609347
Characterization and protective performance of acrylic‐based nanocomposite coating reinforced with silica nanoparticles
M. Bozorg (2017)
10.1007/s10856-019-6255-5
Electrospun polycaprolactone/hydroxyapatite/ZnO nanofibers as potential biomaterials for bone tissue regeneration
Ajinkya A. Shitole (2019)
10.3390/polym12071535
Polyurethane/Zinc Oxide (PU/ZnO) Composite—Synthesis, Protective Property and Application
M. M. Rahman (2020)
10.1016/J.EURPOLYMJ.2016.09.028
Nanocomposites based on biosafe nano ZnO and different polymeric matrixes for antibacterial, optical, thermal and mechanical applications
S. Mallakpour (2016)
10.1080/03602559.2017.1280683
Recent Advances in Polyurethane-Based Nanocomposites: A Review
Rajeswaran Vaithylingam (2017)
10.1016/B978-0-12-804308-0.00011-X
Antimicrobial nanocomposites for food packaging applications: novel approaches
A. Jiménez (2016)
10.1039/C6RA20700F
Improvement of cytocompatibility of 3D-printing resins for endothelial cell adhesion
Zuyan Lu (2016)
10.3389/fchem.2018.00586
CoAl2O4/Kaoline Hybrid Pigment Prepared via Solid-Phase Method for Anticorrosion Application
Anjie Zhang (2018)
10.1016/j.colsurfb.2017.12.037
Gold nanoparticle contact point density controls microbial adhesion on gold surfaces.
Carolin Dewald (2018)
10.1016/J.ENMM.2017.12.004
Removal of toxic metal ions from wastewater using ZnO@Chitosan core-shell nanocomposite
Abdel Halim A. Saad (2018)
10.12691/AEES-7-5-4
Photocatalytic Degradation of Persistence Herbicide Fomesafen by Using ZnO/Na 2 S 2 O 8 as a Catalyst/Oxidant under UV radiation
Naveetha Gaggara (2019)
10.1016/J.SERJ.2017.10.001
Zinc oxide nanoparticles for water disinfection
Emelita Asuncion S. Dimapilis (2018)
10.1039/c5cp06807j
Augmented Z scheme blueprint for efficient solar water splitting system using quaternary chalcogenide absorber material.
P. Sarswat (2016)
10.1016/J.PORGCOAT.2019.06.031
Preparation of zinc methacrylate-methylmethacrylate-butyl acrylate emulsions and their application in exterior paints
M. Eren (2019)
10.1016/J.DYEPIG.2018.04.052
Synthesis and enhanced electron transfer of supramolecular nano-composite containing dendritic dye and surface-modified ZnO nano-rods
Chien-Min Lin (2018)
10.1007/s11661-019-05375-x
Investigation of ZnO/Waterborne Polyurethane Hybrid Coatings for Corrosion Protection of AISI 1018 Carbon Steel Substrates
P. Salazar-Bravo (2019)
10.1088/2053-1591/AAFF8B
Dynamic mechanical properties of zinc oxide reinforced linear low density polyethylene composites
Abhimanyu Tharayil (2019)
10.1039/C8RA06949B
Mechanism of sulfidation of small zinc oxide nanoparticles
P. Banerjee (2018)
10.1002/app.48825
Effectiveness of PANI/Cu/TiO2 ternary nanocomposite on antibacterial and antistatic behaviors in polyurethane coatings
A. Mirmohseni (2020)
10.1016/J.DYEPIG.2017.08.009
A hybrid dye-clay nano-pigment: Synthesis, characterization and application in organic coatings
A. Mahmoodi (2017)
See more
Semantic Scholar Logo Some data provided by SemanticScholar