Online citations, reference lists, and bibliographies.
← Back to Search

High Effective Organic Corrosion Inhibitors For 2024 Aluminium Alloy

S. Lamaka, M. Zheludkevich, K. A. Yasakau, M. F. Montemor, M. G. Ferreira
Published 2007 · Chemistry

Save to my Library
Download PDF
Analyze on Scholarcy
Share
Abstract The inhibiting effect of several organic compounds on the corrosion of 2024 aluminium alloy in neutral chloride solution was investigated in the present work. The candidates were selected based on the assumption that effective inhibitors should form highly insoluble complexes with components of AA2024. Along with organic complexing agents, the salts of rare-earth elements were included into screening electrochemical impedance spectroscopy (EIS) test for getting comparative data. Results of EIS analysis revealed three most effective organic inhibitors: salicylaldoxime, 8-hydroxyquinoline and quinaldic acid. Their anti-corrosion performance was additionally investigated via dc polarization, as well as localized techniques: scanning electron microscopy coupled with energy dispersive spectroscopy (SEM/EDS), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy coupled with scanning Kelvin probe (SKPFM). Localized measurements at exactly the same microdimensional zones of the alloy before and after immersion into 0.05 M sodium chloride solution allowed tracing the evolution of the Volta potential, chemical composition, surface topography and formation of corrosion products on the surface and intermetallic inclusions during the corrosion tests. The results show that the quinaldic acid, salicylaldoxime and 8-hydroxyquinoline provide anti-corrosion protection for AA2024 forming a thin organic layer of insoluble complexes on the surface of the alloy. Inhibiting action is the consequence of suppression of dissolution of Mg, Al and Cu from the corrosion active intermetallic zones.
This paper references
10.1021/AC0108257
Aluminum surface corrosion and the mechanism of inhibitors using pH and metal ion selective imaging fiber bundles.
S. Szunerits (2002)
10.1016/J.ELECOM.2005.12.019
TiOx self-assembled networks prepared by templating approach as nanostructured reservoirs for self-healing anticorrosion pre-treatments
S. Lamaka (2006)
10.1002/ADMA.200502053
Layer‐by‐Layer Assembled Nanocontainers for Self‐Healing Corrosion Protection
D. Shchukin (2006)
Anal
S. Szunerits (2002)
10.1002/SIA.1346
Oxidation of magnesium
V. Fournier (2002)
10.1016/S0921-5093(98)00494-8
Corrosion behavior of squeeze-cast silicon carbide-2024 composites in aerated 3.5 wt.% sodium chloride
G. E. Kiourtsidis (1998)
10.1016/J.ELECTACTA.2004.01.038
Aminotriazole as corrosion inhibitor of Cu30Ni alloy in 3% NACl in presence of ammoniac
K. Es-salah (2004)
Practical surface analysis: By auger and x-ray photoelectron spectroscopy
David Briggs (1983)
Soc
R. G. Buchheit (1997)
10.1016/S0010-938X(00)00002-0
Relation between microstructural aspects of AA2024 and its corrosion behaviour investigated using AFM scanning potential technique
P. Campestrini (2000)
Electrochem
I.T.E. Fonseca (2002)
10.1002/SIA.1743
Chemical environment of copper at the surface of a CuAl2 model alloy: XPS, MEIS and TEM analyses
Y. Liu (2004)
Acta Chem
R. Nasanen (1954)
Corros
V. Guillaumin (1999)
10.1016/S0010-938X(97)86099-4
The role of precipitates enriched with copper on the susceptibility to pitting corrosion of the 2024 aluminium alloy
C. Blanc (1997)
10.1016/S0010-938X(01)00006-3
Evaluation of corrosion inhibition of brass in chloride media using EIS and ENA
A. Nagiub (2001)
10.1016/0013-4686(95)00472-6
An investigation of the corrosion inhibition of pure aluminum in neutral and acidic chloride solutions
L. Garrigues (1996)
10.1016/S0010-938X(97)00022-X
On the protective action of 1,2,3-benzotriazole derivative films against copper corrosion
L. Tommesani (1997)
10.1016/s0021-9673(00)86636-4
Handbook of analytical chemistry
Julius Ju Lurje (1975)
10.1016/J.ELECTACTA.2004.06.008
Use of rare earth salts as electrochemical corrosion inhibitors for an Al–Li–Cu (8090) alloy in 3.56% NaCl
B. Davó (2004)
Electrochim
K. Es-Salah (2004)
Surf
V. Fournier (2002)
10.1021/I560155A011
Determination of Copper in Cast Iron and Steels with Quinaldic Acid
J. F. Flagg (1946)
A
P. Campestrini (2004)
10.1149/1.1837874
Local Dissolution Phenomena Associated with S Phase ( Al2CuMg ) Particles in Aluminum Alloy 2024‐T3
R. Buchheit (1997)
10.1016/J.APSUSC.2005.01.067
Corrosion mechanism of laser-melted AA 2014 and AA 2024 alloys
Z. Liu (2005)
10.1021/JP002014X
Imaging for Uniformity of Lithium Metal Surface Using Tapping Mode-Atomic Force and Surface Potential Microscopy
S. Shiraishi (2001)
10.1016/J.IJADHADH.2005.07.001
Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys
G. Critchlow (2006)
Zh
I. V. Tananaev (1957)
Int
G. W. Critchlow (2006)
10.1016/S0300-9440(01)00205-3
Protective effect of electropolymerized 2-mercaptobenzimidazole upon copper corrosion
B. Trachli (2002)
10.1016/J.TSF.2003.07.016
Hybrid organo-ceramic corrosion protection coatings with encapsulated organic corrosion inhibitors
A. N. Khramov (2003)
10.1016/S0921-5093(02)00445-8
A study on pitting corrosion of aluminum alloy 2024-T3 by scanning microreference electrode technique
Minhua Shao (2003)
10.1016/S0010-938X(98)00116-4
Localized corrosion of 2024 T351 aluminium alloy in chloride media
Valérie Guillaumin (1998)
10.1016/0039-9140(62)80066-6
Precipitation of copper salicylaldoximate from homogeneous solution
Richard F. Pietrzak (1962)
Bull
M. Jean (1943)
Prog
S. V. Lamaka (2007)
10.1016/J.CORSCI.2005.05.008
The influence of microstructure on the corrosion behaviour of AZ91D studied by scanning Kelvin probe force microscopy and scanning Kelvin probe
M. Jönsson (2006)
10.1149/1.1359199
Characterization of Corrosion Interfaces by the Scanning Kelvin Probe Force Microscopy Technique
V. Guillaumin (2001)
Soc
R. G. Buchheit (1997)
10.1039/AN9911600537
Conductimetric determination of some metal ions using salicylaldoxime as the reagent
M. Sarkar (1991)
10.1016/J.CORSCI.2004.07.029
Relations between sample preparation and SKPFM Volta potential maps on an EN AW-6005 aluminium alloy
B. S. Tanem (2005)
Soc
S. Yee (1991)
10.5860/choice.42-5612
Lange's Handbook of Chemistry
J. A. Dean (1978)
Electrochim
K. A. Yasakau (2007)
10.1016/S0010-938X(98)00090-0
Inhibitory action of 8-HYDROXYQUINOLINE on the copper corrosion process
G. P. Cicileo (1998)
10.1149/1.1838633
Characterization of AA2024-T3 by Scanning Kelvin Probe Force Microscopy
P. Schmutz (1998)
10.1198/000313001750358509
APPL
A. Glen (2001)
10.1016/S0010-938X(99)00012-8
Pitting corrosion of aluminum
Z. Szklarska‐Śmiałowska (1999)
Electrochem
S. V. Lamaka (2006)
10.1063/1.368181
Resolution and contrast in Kelvin probe force microscopy
H. Jacobs (1998)
Corros
Z. Szklarska-Smialowska (1999)
10.1149/1.1809590
Scanning Kelvin Probe Force Microscopy A Useful Tool for Studying Atmospheric Corrosion of MgAl Alloys In Situ
D. B. Blücher (2003)
10.1016/S1388-2481(02)00273-4
Passivity breakdown of Al 2024-T3 alloy in chloride solutions: a test of the point defect model
I. T. Fonseca (2002)
in: D
C. D. Wagner (1990)
Prog
B. Trachli (2002)
Electrochim
F. Andreatta (2006)
10.1016/J.PORGCOAT.2003.10.006
Plasma-treated triazole as a novel organic slow-release paint pigment for corrosion control of AA2024-T3
H. Yang (2004)
10.1149/1.2085578
Application of Kelvin Microprobe to the Corrosion of Metals in Humid Atmospheres
S. Yee (1991)
10.1016/J.CORSCI.2005.05.040
Triazole and thiazole derivatives as corrosion inhibitors for AA2024 aluminium alloy
M. Zheludkevich (2005)
Soc
V. Guillaumin (2001)
Corros
L. Tommesani (1997)
Soc
N. Dimitrov (2000)
Mater
G. Kiourtsidis (1998)
Zh
E. S. Tinovskaya (1950)
Chem
K. A. Yasakau (2007)
Corros
M. Jonsson (2006)
Corros
C. Blanc (1997)
Soc
P. Leblanc (2002)
10.2307/j.ctvrnfqk1.10
? ? ? ? f ? ? ? ? ?
A. ADoefaa (2003)
10.1016/J.ELECTACTA.2005.10.010
Volta potential of second phase particles in extruded AZ80 magnesium alloy
F. Andreatta (2006)
Electrochim
L. Garrigues (1996)
Corros
G. P. Ciccileo (1998)
10.1149/1.1471546
A Study of Corrosion and Pitting Initiation of AA2024-T3 Using Atomic Force Microscopy
P. Leblanc (2002)
10.1021/JP0560664
Mechanism of corrosion inhibition of AA2024 by rare-earth compounds.
K. Yasakau (2006)
10.1016/S0257-8972(03)00743-6
Formation of a cerium-based conversion coating on AA2024: relationship with the microstructure
P. Campestrini (2004)
10.1016/J.PORGCOAT.2006.08.029
Nanoporous titania interlayer as reservoir of corrosion inhibitors for coatings with self-healing ability
S. Lamaka (2007)
Adv
D. Shchukin (2006)
Corros
Y. L. Cheng (2004)
Ind
J. F. Flagg (1946)
10.1016/J.CORSCI.2003.10.005
A study of the corrosion of aluminum alloy 2024-T3 under thin electrolyte layers
Ying-liang Cheng (2004)
Phys
H. O. Jacobs (1998)
Mater
M. Shao (2003)
10.1016/S0010-938X(00)00051-2
Inhibition of 5083 aluminium alloy and galvanised steel by lanthanide salts
M. A. Arenas (2001)
10.5006/1.3280607
Technical Note: Concerning the Conversion of the Constant Phase Element Parameter Y0 into a Capacitance
C. H. Hsu (2001)
Surf
Y. Liu (2004)
Corros
B. S. Tanem (2005)
Corros
M. L. Zheludkevich (2005)
L
R. F. Pietzzak (1962)
10.1177/001452469000101110
"J."
G.G. Stokes (1890)
Soc
D. Bengtsson Blucher (2004)
Soc
P. Schmutz (1998)
10.1149/1.1393896
Dealloying of Al2CuMg in Alkaline Media
N. Dimitrov (2000)
10.1149/1.1838634
Corrosion Study of AA2024‐T3 by Scanning Kelvin Probe Force Microscopy and In Situ Atomic Force Microscopy Scratching
P. Schmutz (1998)
Corros
A. Nagiub (2001)
Chem
S. Shiraishi (2001)



This paper is referenced by
10.1016/j.jcis.2020.10.041
Hyperbranched molecules having multiple functional groups as effective corrosion inhibitors for Al alloys in aqueous NaCl.
Xiaolei Ren (2020)
10.3103/S1068375518030109
2-(4-(Diethylamino)-2-hydroxybenzyledene) Hydrazinecarboamide as Corrosion Inhibitor on AA2024-T3 Aluminium Alloy in 0.5 M Hydrochloric Acid Solution
B. G. Prakashaiah (2018)
10.1179/1743278211Y.0000000022
Corrosive wear of aluminium alloy in presence of phosphate
V. Pokhmurs'kii (2012)
10.1007/s10008-013-2078-3
Electrochemical study of the corrosion inhibition ability of “smart” coatings applied on AA2024
D. Snihirova (2013)
10.1016/J.ELECTACTA.2019.134761
Influence of inhibitor adsorption on readings of microelectrode during SVET measurements
Darya Snihirova (2019)
10.1016/J.PORGCOAT.2017.01.002
Cerium tartrate as a pigment in epoxy coatings for corrosion protection of AA 2024-T3
T. Hu (2017)
10.1016/J.ELECTACTA.2011.02.070
In situ electrochemical oxidation of ethylenediamine on Co–B alloy electrode during cycling for improving its electrochemical properties at elevated temperature
D. Lu (2011)
10.1016/J.CORSCI.2010.01.033
High efficiency corrosion inhibitor 8-hydroxyquinoline and its synergistic effect with sodium dodecylbenzenesulphonate on AZ91D magnesium alloy
H. Gao (2010)
10.1016/j.electacta.2020.136166
ATR-FTIR in Kretschmann configuration integrated with electrochemical cell as in situ interfacial sensitive tool to study corrosion inhibitors for magnesium substrates
L. I. Fockaert (2020)
10.1016/J.CORSCI.2011.03.012
Corrosion protection of aluminium alloy 2024-T3 in 0.05 M NaCl by cerium cinnamate
H. Shi (2011)
10.1016/J.PORGCOAT.2017.10.015
Improvement of active corrosion protection of carbon steel by water-based epoxy coating with smart CeO2 nanocontainers
Xuehui Liu (2018)
10.1002/maco.202011847
2‐hydroxyethilammonium oleate protic ionic liquid as corrosion inhibitor for aluminum in neutral medium
M. Vega (2020)
10.1002/9781118883051.CH4
Self‐Healing Polymeric Coatings
A. Esteves (2015)
10.1016/J.ELECOM.2010.12.005
SECM study of defect repair in self-healing polymer coatings on metals
Y. González-García (2011)
10.1016/J.ELECTACTA.2012.07.102
“SMART” protective ability of water based epoxy coatings loaded with CaCO3 microbeads impregnated with corrosion inhibitors applied on AA2024 substrates
D. Snihirova (2012)
10.3390/ma11091518
The Role of Surface Topography on Deformation-Induced Magnetization under Inhomogeneous Elastic-Plastic Deformation
N. Sonntag (2018)
10.1039/c9ra09552g
Corrosion protection mechanism of Ce4+/organic inhibitor for AA2024 in 3.5% NaCl
M. Gobara (2020)
10.1016/J.MOLSTRUC.2016.07.061
Phototransformations of quinaldic acid: Theoretical and experimental study
I. Shterev (2017)
10.1515/corrrev-2014-0002
Corrosion inhibitors for metals in maintenance equipment: introduction and recent developments
Yongxin Li (2014)
10.1002/SIA.5810
Effectiveness of 2-mercaptobenzothiazole, 8-hydroxyquinoline and benzotriazole as corrosion inhibitors on AA 2024-T3 assessed by electrochemical methods
A. Balaskas (2015)
10.4152/PEA.201606395
Aromatic Carboxylic Acids as Corrosion Inhibitors for Aluminium in Alkaline Solution
A. R. Madram (2016)
10.1016/J.APSUSC.2016.04.188
Corrosion behaviour of Al 86.0 Co 7.6 Ce 6.4 glass forming alloy with different microstructures
C. Li (2016)
10.3390/nano10040791
Cerium Dioxide Nanoparticles as Smart Carriers for Self-Healing Coatings
S. Habib (2020)
10.1080/15421401003720124
Electrochemical Behaviour of the AA2024 Aluminium Alloy Modified with Self-Assembled Monolayers/Polyaniline Double Films
Daiane P. B. Silva (2010)
10.1051/MATTECH/2011012
Les revêtements sol-gel pour l’anticorrosion
J. Bonino (2011)
10.1016/J.SURFCOAT.2008.11.018
Corrosion protection of magnesium alloy AZ31 by coating with poly(ether imides) (PEI)
N. Scharnagl (2009)
10.1007/s11665-018-3694-y
Microstructural Characterization and Electrochemical Behavior of AA2014 Al-Cu-Mg-Si Alloy of Various Tempers
K. Ghosh (2018)
10.1016/j.pmatsci.2020.100663
Recent advances in hybrid organic-inorganic materials with spatial architecture for state-of-the-art applications
W. Zoubi (2020)
10.1016/J.PORGCOAT.2008.12.002
Impedance evaluation of permeability and corrosion of Al-2024 aluminum alloy coated with a chromate free primer
A. Foyet (2009)
10.1016/J.APSUSC.2015.09.206
Electrochemical and DFT studies of quinoline derivatives on corrosion inhibition of AA5052 aluminium alloy in NaCl solution
D. Wang (2015)
10.1016/J.PORGCOAT.2018.04.005
Elaboration of γ-glycidoxypropyltrimethoxysilane coating on AA2024-T3 aluminum alloy: Influence of synthesis route on physicochemical and anticorrosion properties
M. Mrad (2018)
10.1016/J.MOLLIQ.2019.01.116
Theoretical and experimental investigation of two alkyl carboxylates as corrosion inhibitors for steel in acidic medium
I. Obot (2019)
See more
Semantic Scholar Logo Some data provided by SemanticScholar