← Back to Search
CuO/graphene Composite As Anode Materials For Lithium-ion Batteries
Y. Mai, X. Wang, J. Xiang, Y. Qiao, Dan Zhang, C. Gu, J. Tu
Published 2011 · Chemistry
Save to my Library
Download via 🐼 PaperPanda Download via oaDOI Download via OAB Download via LibKey Download via Google Google ScholarAnalyze on Scholarcy Visualize in Litmaps
Reduce the time it takes to create your bibliography by a factor of 10 by using the world’s favourite reference manager
Time to take this seriously.
Abstract CuO/graphene composite is synthesized from CuO and graphene oxide sheets following reduced by hydrazine vapor. As the electrode material for lithium-ion batteries, CuO nanoparticles with sizes of about 30 nm homogeneously locate on graphene sheets, and act as spacers to effectively prevent the agglomeration of graphene sheets, keeping their high active surface. In turn, the graphene sheets with good electrical conductivity server as a conducting network for fast electron transfer between the active materials and charge collector, as well as buffered spaces to accommodate the volume expansion/contraction during discharge/charge process. The synergetic effect is beneficial for the electrochemical performances of CuO/graphene composite, such as improved initial coulombic efficiency (68.7%) and reversible capacity of 583.5 mAh g−1 with 75.5% retention of the reversible capacity after 50 cycles.
This paper references
TPR and TPD studies of CuOCeO2 catalysts for low temperature CO oxidation
M. Luo (1997)
Layer-by-Layer Assembly of Ultrathin Composite Films from Micron-Sized Graphite Oxide Sheets and Polycations
N. Kovtyukhova (1999)
Particle Size Effects on the Electrochemical Performance of Copper Oxides toward Lithium
S. Grugeon (2001)
A Transmission Electron Microscopy Study of the Reactivity Mechanism of Tailor-Made CuO Particles toward Lithium
A. Débart (2001)
Preparation and Electrochemical Performance of Polycrystalline and Single Crystalline CuO Nanorods as Anode Materials for Li Ion Battery
X. Gao (2004)
Electric Field Effect in Atomically Thin Carbon Films
K. Novoselov (2004)
Nanoionics: ion transport and electrochemical storage in confined systems
J. Maier (2005)
Formation of colloidal CuO nanocrystallites and their spherical aggregation and reductive transformation to hollow Cu2O nanospheres.
Yu Chang (2005)
Nearly Monodisperse Cu2O and CuO Nanospheres: Preparation and Applications for Sensitive Gas Sensors
Jiatao Zhang (2006)
Dandelion-like hollow microspheres of CuO as anode material for lithium-ion batteries
Suqing Wang (2007)
Synthesis of water soluble graphene.
Y. Si (2008)
Introducing Dual Functional CNT Networks into CuO Nanomicrospheres toward Superior Electrode Materials for Lithium-Ion Batteries
Shuohang Zheng (2008)
Approaching ballistic transport in suspended graphene.
Xu Du (2008)
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Changgu Lee (2008)
Evaluation of solution-processed reduced graphene oxide films as transparent conductors.
H. A. Becerril (2008)
Superior thermal conductivity of single-layer graphene.
A. Balandin (2008)
Giant intrinsic carrier mobilities in graphene and its bilayer.
S. Morozov (2007)
A comparison of anodically grown CuO nanotube film and Cu2O film as anodes for lithium ion batteries
J. Xiang (2008)
Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries.
E. Yoo (2008)
Processable aqueous dispersions of graphene nanosheets.
Dan Li (2008)
Gram‐Scale Synthesis of Cu2O Nanocubes and Subsequent Oxidation to CuO Hollow Nanostructures for Lithium‐Ion Battery Anode Materials
Ji Chan Park (2009)
Fabrication of CuO/C films with sisal-like hierarchical microstructures and its application in lithium ion batteries
Hongbo Wang (2009)
Enhanced cyclic performance and lithium storage capacity of SnO2/graphene nanoporous electrodes with three-dimensionally delaminated flexible structure.
Seung‐Min Paek (2009)
Fabrication of a graphene–cuprous oxide composite
Chao Xu (2009)
Graphene nanosheets for enhanced lithium storage in lithium ion batteries
Guoxiu Wang (2009)
Electrochemical performance of graphene nanosheets as anode material for lithium-ion batteries
Peng Guo (2009)
In situ chemical synthesis of SnO2–graphene nanocomposite as anode materials for lithium-ion batteries
J. Yao (2009)
Li Storage Properties of Disordered Graphene Nanosheets
Dengyu Pan (2009)
Self-assembled TiO2-graphene hybrid nanostructures for enhanced Li-ion insertion.
Donghai Wang (2009)
Electrochemical performance of polycrystalline CuO nanowires as anode material for Li ion batteries
Libao Chen (2009)
In situ synthesis of SnO2/graphene nanocomposite and their application as anode material for lithium ion battery
Z. Du (2010)
Ultrahigh-power micrometre-sized supercapacitors based on onion-like carbon.
D. Pech (2010)
Electrochemical properties of graphene nanosheet/carbon black composites as electrodes for supercapacitors
Jun Yan (2010)
N. Li (2010)
Supercapacitors based on flexible graphene/polyaniline nanofiber composite films.
Qiongyu Wu (2010)
Self-assembled synthesis of hierarchical nanostructured CuO with various morphologies and their application as anodes for lithium ion batteries
J. Xiang (2010)
Simple synthesis of surface-modified hierarchical copper oxide spheres with needle-like morphology as anode for lithium ion batteries
J. Xiang (2010)
Graphene as a conductive additive to enhance the high-rate capabilities of electrospun Li4Ti5O12 for lithium-ion batteries
N. Zhu (2010)
Enhanced high rate properties of ordered porous Cu2O film as anode for lithium ion batteries
J. Xiang (2010)
Ni(OH)2 nanoplates grown on graphene as advanced electrochemical pseudocapacitor materials.
Hailiang Wang (2010)
Anchoring semiconductor and metal nanoparticles on a two-dimensional catalyst mat. Storing and shuttling electrons with reduced graphene oxide.
I. Lightcap (2010)
Nanocrystal growth on graphene with various degrees of oxidation.
Hailiang Wang (2010)
Mn3O4 nanoparticles embedded into graphene nanosheets: preparation, characterization, and electrochemical properties for supercapacitors
Bei Wang (2010)
Incorporation of MWCNTs into leaf-like CuO nanoplates for superior reversible Li-ion storage
J. Xiang (2010)
Large reversible capacity of high quality graphene sheets as an anode material for lithium-ion batteries
P. Lian (2010)
Graphene anchored with co(3)o(4) nanoparticles as anode of lithium ion batteries with enhanced reversible capacity and cyclic performance.
Zhong Wu (2010)
Electrochemical behaviors of graphene–ZnO and graphene–SnO2 composite films for supercapacitors
Ting Lu (2010)
Decorating graphene oxide with CuO nanoparticles in a water-isopropanol system.
Junwu Zhu (2010)
This paper is referenced by
An environmentally friendly sepiolite/Cu2O/Cu ternary composite as anode material for Li-ion batteries
Ji Zhou (2022)
Magnetic assembling GO/Fe3O4/microbes as hybridized biofilms for enhanced methane production in microbial electrosynthesis
Yuting He (2022)
Co-free high entropy spinel oxide anode with controlled morphology and crystallinity for outstanding charge/discharge performance in Lithium-ion batteries
Thi Xuyen Nguyen (2022)
Graphene-Enhanced Battery Components in Rechargeable Lithium-Ion and Lithium Metal Batteries
Hao-Hsun Chang (2021)
The study on nanostructural evolution of CuO/Graphene oxide nanocomposite during the first discharge processes
Weidong Cheng (2021)
The Synergetic Effect Induced High Electrochemical Performance of CuO/Cu2O/Cu Nanocomposites as Lithium-Ion Battery Anodes
Lin-Hui Wang (2021)
Three-dimensional graphene-wrapped Co0.85Se@C as high volumetric capacity anode material for lithium-ion batteries
Wen Ding (2021)
Structure Investigation by Neutron Diffraction and X‐Ray Diffraction of Graphene Nanocomposite CuO–rGO Prepared by Low‐Cost Method
Seham K. Abdel-Aal (2021)
Facile Self-Assembly Solvothermal Preparation of CuO/Cu2O/Coal-Based Reduced Graphene Oxide Nanosheet Composites as an Anode for High-Performance Lithium-Ion Batteries
Yating Zhang (2021)
Composition tuning in copper - oxide decorated reduced graphene oxide yields efficient photo- and reduction catalysts
Revathi Kottappara (2021)
Interfacial Interactions and Tribological Behavior of Metal-Oxide/2D-Material Contacts
S. Yadav (2021)
Controlled growth of TiO2 nanoparticles on graphene by hydrothermal method for visible-light photocatalysis
Thanh-Lieu T. Le (2021)
Customizable design strategies for high-performance bioanodes in bioelectrochemical systems
Yu-ting He (2021)
A highly sensitive nonenzymatic glucose sensor based on Cu/Cu2O composite nanoparticles decorated single carbon fiber
Lu Fang (2021)
Metal oxides based electrochemical pH sensors: Current progress and future perspectives
Libu Manjakkal (2020)
Enhanced catalytic performance of Cu/Cu2O nanoparticles via introduction of graphene as support for reduction of nitrophenols and ring opening of epoxides with amines established by experimental and theoretical investigations
Surbhi Kapoor (2020)
Biological synthesis of copper oxide-carbon nanocomposites using the aqueous extract of Vitex negundo Linn. leaves, characterization and antimicrobial activity
P. Bhavyasree (2020)
Unraveling the effects on lithium-ion cathode performance by cation doping M-Li2CuO2 solid solution samples (M = Mn, Fe and Ni).
M. Martínez-Cruz (2020)
Synthesis of CuO–graphene nanocomposite material and the effect of gamma radiation on CuO–graphene/p-Si junction diode
Z. Orhan (2020)
Low annealing temperature effect on Structural, and optical properties of CuO nanostructure thin films
Adel H. Omran Alkhayatt (2020)
Mechanical and structural properties of Li-doped CuO thin films deposited by the Successive Ionic Layer Adsorption and Reaction method
F. Bayansal (2020)
Porous CuO@C composite as high-performance anode materials for lithium-ion batteries.
Yang Xu (2020)
Graphene-based composite emitter
H. Kim (2020)
Facile preparation of polyelectrolyte-functionalized reduced graphene oxide for significantly improving the performance of microbial fuel cells
Jianchun Ma (2020)
Epoxy Resin Enables Facile Scalable Synthesis of CuO/C Nanohybrid Lithium‐Ion Battery Anode with Enhanced Electrochemical Performance
Liujia Ma (2020)
Low-dimensional carbon-based nanomaterials for energy conversion and storage applications
T. Senthil (2020)
Recent advancements of copper oxide based nanomaterials for supercapacitor applications
D. Majumdar (2020)
Protein‐Engineered Functional Materials for Bioelectronics
Min Chen (2020)
Stress-resilient electrode materials for lithium-ion batteries: strategies and mechanisms.
Lei Xu (2020)
ZnO-CuOx/C mesoporous carbon as a stable lithium-ion anode
B. Wang (2020)
Dandelion‐like CoO/Co 3 O 4 /Carbon Composites as Anode Materials for a High‐Performance Lithium Ion Battery
R. Huang (2020)
Co2GeO4/graphene hetero-architecture as a potential anode for sodium ion batteries
G. Suresh babu (2020)See more