Online citations, reference lists, and bibliographies.

Hard Coating Material Selection Using Multi-criteria Decision Making

Aditya Chauhan, R. Vaish
Published 2013 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
Abstract The paper deals with the hard coating material selection using various multi-criteria decision making approaches. Large number of materials has stimulated intense research in the field of material selection. Various quantitative decision making approaches are employed to select hard coating material selection. Technique for order preference by similarity to ideal solution (TOPSIS) is used for ranking these materials. Material selection charts (Ashby approach) is used to select hard coating materials. Pareto-optimal hard coating materials are determined for trade-off between hardness ( H ), H / E and H 3 / E 2 ( E : Young’s modulus). Hierarchical clustering is used to classify hard coating materials under study. Pearson correlation coefficients are calculated between the materials properties under study which can be integrated with materials informatics for rapidly screening and designing materials.
This paper references
10.5860/choice.27-0936
Genetic Algorithms in Search Optimization and Machine Learning
D. Goldberg (1988)
10.1016/0043-1648(68)90175-0
The wear of metals by relatively soft abrasives
R. Richardson (1968)
10.1116/1.573700
Material selection for hard coatings
H. Holleck (1986)
10.1007/BF00552957
Elastic recovery at hardness indentations
B. Lawn (1981)
10.1243/PIME_PROC_1981_195_016_02
Energy Saving through Tribology: A Techno-Economic Study:
H. Jost (1981)
10.1016/J.ACTAMAT.2004.08.002
Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measurements
Y. Bao (2004)
10.2307/3151374
Cluster Analysis For Researchers
H. Romesburg (1984)
10.1007/BF02289588
Hierarchical clustering schemes
S. C. Johnson (1967)
10.1016/J.MATDES.2011.11.021
Magnetic material selection using multiple attribute decision making approach
Aditya Chauhan (2012)
10.1016/J.SURFCOAT.2005.08.097
Materials informatics for the design of novel coatings
L. Zhao (2005)
10.1007/978-3-642-00296-0_5
Pearson Correlation Coefficient
J. Benesty (2009)
10.1016/J.PMATSCI.2006.02.002
Microstructural design of hard coatings
P. Mayrhofer (2006)
10.1016/J.MATDES.2012.04.037
A comparative study on material selection for micro-electromechanical systems
Aditya Chauhan (2012)
10.1063/1.1721448
Contact and Rubbing of Flat Surfaces
J. F. Archard (1953)
Manuale di economia politica
V. Pareto (1965)
10.1016/J.MATDES.2009.07.013
Material selection for microelectronic heat sinks: An application of the Ashby approach
G. Reddy (2010)
10.1016/0301-679x(79)90067-7
History of Tribology
D. Dowson (1979)
10.1557/PROC-383-447
Nanoindentation and Nanoscratching of Hard Carbon Coatings for Magnetic Disks
T. Tsui (1995)
10.1016/J.MATDES.2010.09.012
Material selection for electrostatic microactuators using Ashby approach
Ojasvita Parate (2011)
10.1007/BF01210689
A preference ordering among various Pareto optimal alternatives
I. Das (1999)
10.1145/331499.331504
Data clustering: a review
Anil K. Jain (1999)
10.1201/b11032
Multiple Attribute Decision Making: Methods and Applications
S. Chen (1981)
Strategy for energy conservation through tribology
O. Pinkus (1977)
10.1016/S1359-6454(99)00304-3
MULTI-OBJECTIVE OPTIMIZATION IN MATERIAL DESIGN AND SELECTION
M. Ashby (2000)
10.1007/978-1-4613-9883-7_4
Clustering Analysis and Its Applications
R. Lee (1981)
10.1109/ICASSP.2014.6853858
Examples of optimal noise reduction filters derived from the squared Pearson correlation coefficient
Jiaolong Yu (2014)
10.1007/978-1-4471-3020-8
Multiple Criteria Decision Support in Engineering Design
P. Sen (1998)
10.1088/0508-3443/14/8/311
The relationship between the wear of carbon brush materials and their elastic moduli
J. K. Lancaster (1963)
10.1007/S00158-004-0473-1
The effect of normalization norms in multiple attribute decision making models: a case study in gear material selection
A. Milani (2005)
10.1002/ADEM.200500196
Multi-criteria material selection of monolithic and multi-materials in engineering design
P. Sirisalee (2006)



This paper is referenced by
10.3390/SU8010079
Commercially Available Materials Selection in Sustainable Design: An Integrated Multi-Attribute Decision Making Approach
R. Zhao (2016)
10.1007/s12046-019-1261-3
Selection of coating material for magnesium alloy using Fuzzy AHP-TOPSIS
R. Venkatesha Prasad (2020)
10.1016/J.ENCONMAN.2014.09.077
Selection and performance assessment of Phase Change Materials for heating, ventilation and air-conditioning applications
Monisha Rastogi (2015)
Elaboration et caractérisation de revêtements à base de nitrure de chrome, carbonitrure et carbure de titane élaborés par pulvérisation magnétron
I. Rahil (2013)
10.1007/s11771-020-4322-1
Decision making tools for optimal material selection: A review
Divya Zindani (2020)
10.1016/j.asoc.2014.04.006
Selection of optimal electronic toll collection system for India: A subjective-fuzzy decision making approach
Saurabh Vats (2014)
10.1111/IJAC.12168
Selection of Ferroelectric Ceramics for Transducers and Electrical Energy Storage Devices
Gaurav Vats (2015)
10.1016/j.jascer.2013.12.002
Selection of optimal sintering temperature of K0.5Na0.5NbO3 ceramics for electromechanical applications
Gaurav Vats (2014)
10.1016/B978-0-08-100536-1.00007-2
Case studies of materials selection and design
Ali Jahan (2016)
10.1016/J.SURFCOAT.2015.06.058
A strategy for the selection of multiple materials and processes fulfilling inherently incompatible functions: The case of successive surface treatments
Pierre D'Ans (2015)
Using Pythagorean Fuzzy Sets (PFS) in Multiple Criteria Group Decision Making (MCGDM) Methods for Engineering Materials Selection Applications
Alaa Fouad Momena (2019)
10.1155/2020/4039253
Assessment and Comparison of Various MCDM Approaches in the Selection of Manufacturing Process
Atef M. Ghaleb (2020)
10.1016/j.matdes.2019.108211
Point-defect engineering of MoN/TaN superlattice films: A first-principles and experimental study
N. Koutná (2019)
10.1109/ICPEICES.2016.7853299
A fuzzy VIKOR model for selection of optimal Biomass usage in India
Priyanka (2016)
10.1007/978-981-13-8196-6_41
Selection of Coating and Nitriding Process for AISI 4140 Steel Material to Enhance Tribological Properties
Pathan Firojkhan (2020)
10.1002/ENTE.201402098
Selection of Low‐Temperature Phase‐Change Materials for Thermal Energy Storage Based on the VIKOR Method
Yi Wang (2015)
10.1111/IJAG.12015
An Assessment of Bulk Metallic Glasses for Microelectromechanical System Devices
Aditya Chauhan (2013)
10.1016/J.MATDES.2017.02.041
A comprehensive MCDM-based approach using TOPSIS, COPRAS and DEA as an auxiliary tool for material selection problems
Seyed Hadi Mousavi-Nasab (2017)
10.1007/978-981-13-2417-8_4
Selection of Optimal Aluminum-Based Composite Produced by Powder Metallurgy Process in Uncertain Environment
Razieh Abdoos (2018)
10.12720/IJMSE.1.2.104-111
Gear Material Selection using Complex Proportional Assessment and Additive Ratio Assessment-based Approaches: A Comparative Study
Prasenjit Chatterjee (2013)
10.1016/J.MATDES.2018.04.033
High temperature thermodynamics of spinodal decomposition in arc deposited TixNbyAlzN coatings
F. Tasn'adi (2018)
10.1002/EP.11851
Raw material selection for pulping and papermaking using TOPSIS multiple criteria decision making design
K. Anupam (2014)
10.5267/J.DSL.2014.9.001
Q-analysis in Materials Selection
Orchi Bhattacharyya (2015)
PAMUKKALE ÜNİVERSİTESİ FEN BİLİMLERİ ENSTİTÜSÜ MAKİNA MÜHENDİSLİĞİ ANABİLİM DALI
Muhammet Yücel (2015)
10.1007/S40171-013-0038-5
Ranking of Flexibility in Flexible Manufacturing System by Using a Combined Multiple Attribute Decision Making Method
Vineet Jain (2013)
10.1016/J.MATDES.2018.07.058
Material selection for Micro-Electro-Mechanical-Systems (MEMS) using Ashby's approach
Zahid Mehmood (2018)
10.1016/J.MATDES.2019.107827
Performance indices and selection of thin hard coatings on soft substrates for indentation and scratch resistance
Audrey Favache (2019)
10.1142/S2010135X15500034
Piezoelectric materials selection for sensor applications using finite element and multiple attribute decision-making approaches
A. Kumar (2015)
10.3139/146.111489
A material selection approach using the TODIM (TOmada de Decisao Interativa Multicriterio) method and its analysis
Divya Zindani (2017)
10.3390/COATINGS9030155
Nanocomposite Multilayer Binary Nitride Coatings Based on Transition and Refractory Metals: Structure and Properties
Alexander D. Pogrebnjak (2019)
10.1080/00150193.2015.1011563
Performance Hierarchy of Piezoelectric Materials for Active Vibration Control Application
Anshul Sharma (2015)
10.4028/www.scientific.net/AMM.809-810.1468
Application of Recently Developed MCDM Methods for Materials Selection
Dusan Petkovic (2015)
See more
Semantic Scholar Logo Some data provided by SemanticScholar