← Back to Search
Thermo-sensitive And Swelling Properties Of Cellouronic Acid Sodium/poly (acrylamide-co-diallyldimethylammonium Chloride) Semi-IPN.
H. Zhang, X. Gao, Keli Chen, H. Li, Lincai Peng
Published 2018 · Materials Science, Medicine
Save to my Library
Download PDFAnalyze on Scholarcy
In current study, cellouronic acid sodium (CAS), obtained from bagasse pith, has been introduced into poly(acrylamide-co-diallyldimethylammonium chloride) (poly(AM-co-DAC)) network to form novel thermo-sensitive semi-IPNs. The structure and morphology of the hydrogels were proved by Fourier transformation infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The effects of CAS content, initiator charge, cross-linker dosage and swelling-medium property on the thermo-responsive water absorptivity were investigated in detail. The results elucidated that the prepared gels exhibited a thermo-sensibility with an upper critical solution temperature (UCST) and a high water-absorbency. And the values of UCST and equilibrium swelling ratio largely depended on the inner structure of the semi-IPNs and the external solvent property. It was also revealed that the swelling process conformed to the Schott's pseudo second order model and diffusion type was non-Fickian diffusion. The value of activation energy for this polyelectrolyte was found to be 8.74kJ/mol.
This paper references
Oxidation of regenerated cellulose with NaClO2 catalyzed by TEMPO and NaClO under acid-neutral conditions
M. Hirota (2009)
Enhanced protein retention on poly(caprolactone) via surface initiated polymerization of acrylamide
Yuhao Ma (2016)
Synthesis and Temperature-Responsive Properties of Novel Semi-interpenetrating Polymer Networks Consisting of a Poly(acrylamide) Polymer Network and Linear Poly(acrylic acid) Chains
H. Tsutsui (2006)
Influence of external stimuli on the network properties of cationic poly(N-acryloyl-N’-propyl piperazine) hydrogels
G. Deen (2016)
Superabsorbent conducting hydrogel from poly(acrylamide-aniline) with thermo-sensitivity and release properties
Q. Tang (2008)
Radiation synthesis and drug delivery properties of interpenetrating networks (IPNs) based on poly(vinyl alcohol)/ methylcellulose blend hydrogels.
A. M. El-Naggar (2017)
Incorporation of iron oxide nanoparticles into temperature-responsive poly (N-isopropylacrylamide-co-acrylic acid) P (NIPAAm-AA) polymer hydrogel
M. Rahman (2015)
Mechanical behavior of a terpolymer-based pH- and temperature-responsive hydrogel
L. Gao (2015)
Synthesis of poly(dimethyldiallylammonium chloride-co-acrylamide)-graft-triethylenetetramine-dithiocarbamate and its removal performance and mechanism of action towards heavy metal ions
Lihua Liu (2013)
Biodegradation for hydrolyzed polyacrylamide in the anaerobic baffled reactor combined aeration tank
Guoliang Sang (2015)
Surface peeling of cellulose nanocrystals resulting from periodate oxidation and reductive amination with water-soluble polymers
Firas Azzam (2015)
Poly(ethylene glycol) plasticized poly(vinyl alcohol)/poly(acrylamide-co-diallyldimethylammonium chloride) as alkaline anion-exchange membrane for potential fuel cell applications
T. Zhou (2013)
A simple equation for description of solute release I. Fickian and non-fickian release from non-swellable devices in the form of slabs, spheres, cylinders or discs
P. L. Ritger (1987)
Thermo- and Sulfate-Controllable Bioelectrocatalysis of Glucose Based on Horseradish Peroxidase and Glucose Oxidase Embedded in Poly(N,N-diethylacrylamide) Hydrogel Films
Hui-qin Yao (2014)
A novel thermo-sensitive hydrogel based on thiolated chitosan/hydroxyapatite/beta-glycerophosphate.
Xujie Liu (2014)
Novel cross linked guar gum-g-poly(acrylate) porous superabsorbent hydrogels: Characterization and swelling behaviour in different environments.
K. P. Chandrika (2016)
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
Ž. Jovanović (2011)
Synthesis and characterization of a novel semi-IPN hydrogel based on Salecan and poly(N,N-dimethylacrylamide-co-2-hydroxyethyl methacrylate).
Xinyu Hu (2014)
Single and binary adsorption of heavy metal ions from aqueous solutions using sugarcane cellulose-based adsorbent.
Futao Wang (2017)
Dynamic mechanical and swelling properties of maleated hyaluronic acid hydrogels.
H. Lin (2015)
Aerogels from quaternary ammonium-functionalized cellulose nanofibers for rapid removal of Cr(VI) from water.
X. He (2014)
Biodegradation of Polyacrylamide and Its Derivatives
Sanket J. Joshi (2017)
The new effective flocculants – Copolymers of N,N-dimethyl-N,N-diallyl-ammonium chloride and N,N-dimethylacrylamide
K. Abdiyev (2015)
Influence of temperature, pH and simulated biological solutions on swelling and structural properties of biomineralized (CaCO3) PVP–CMC hydrogel
Rushita Shah (2015)
Measurement of the dynamic behavior of thin poly(N-isopropylacrylamide) hydrogels and their phase transition temperatures measured using reflectometric interference spectroscopy
F. Okada (2015)
Superabsorbent hydrogels for removal of divalent toxic ions. Part I: Synthesis and swelling characterization
S. Bajpai (2005)
Polymeric Hydrophilic Hydrogels with Flexible Hydrophobic Chains. Control of the Hydration and Interactions with Water Molecules
B. Vázquez (1997)
Thermo-sensitive chitosan–cellulose derivative hydrogels: swelling behaviour and morphologic studies
S. C. Barros (2014)
Polyplex Formation Influences Release Mechanism of Mono- and Di-Valent Ions from Phosphorylcholine Group Bearing Hydrogels
A. N. Wilson (2014)
Biodegradation of polyacrylamide by bacteria isolated from activated sludge and oil-contaminated soil.
Qinxue Wen (2010)
Investigation of the microstructure of poly(diallyldimethyl‐ammonium chloride) by nitrogen‐14(15) NMR spectroscopy
T. Masterman (1994)
Mechanical Properties and Isothermal Crystallization Behaviour of Poly(lactide)/Poly(methyl methacrylate)/α-Cellulose Composites
Jyh-Hong Wu (2016)
Study of carboxymethyl chitosan based polyampholyte superabsorbent polymer I: Optimization of synthesis conditions and pH sensitive property study of carboxymethyl chitosan-g-poly(acrylic acid-co-dimethyldiallylammonium chloride) superabsorbent polymer
C. Yu (2010)
Polylactic acid/polyurethane blend reinforced with cellulose nanocrystals with semi-interpenetrating polymer network (S-IPN) structure
Jatin Sethi (2017)
A novel semi-IPN hydrogel: Preparation, swelling properties and adsorption studies of Co (II)
X. Wang (2016)
Cationically modified 6-deoxy-6-azido cellulose as a water-soluble and reactive biopolymer derivative
Leonore Bretschneider (2014)
A simple equation for description of solute release II. Fickian and anomalous release from swellable devices
P. L. Ritger (1987)
Maximizing the yield of water-soluble cellouronic acid sodium salt with high carboxyl content by 4-acetamide-TEMPO mediated oxidation of parenchyma cellulose from bagasse pith
H. Zhang (2016)
A novel thermo-responsive hydrogel based on salecan and poly(N-isopropylacrylamide): synthesis and characterization.
W. Wei (2015)
Solute diffusion in swollen membranes
M. L. B. A. N. A. Peppas (1987)
Kinetics and thermodynamics of biodegradation of hydrolyzed polyacrylamide under anaerobic and aerobic conditions.
L. Zhao (2016)
Kinetics of dispersion polymerization of dimethyl diallyl ammonium chloride and acrylamide
Xiaona Wang (2011)
pH/Temperature control of interpolymer complexation between poly(acrylic acid) and weak polybases in aqueous solutions
Guillaume Sudre (2012)
Effects of aluminum nitride nanoparticles on the space charge behavior of cellulose paper
R. Liao (2016)
Use of carboxylated cellulose nanofibrils-filled magnetic chitosan hydrogel beads as adsorbents for Pb(II).
Y. Zhou (2014)
Superabsorbent nanocomposite hydrogels made of carboxylated cellulose nanofibrils and CMC-g-p(AA-co-AM).
Y. Zhou (2013)
Temperature-sensitive poly-NIPAm modified cellulose nanofibril cryogel microspheres for controlled drug release
F. Zhang (2015)
Temperature-Responsive Interpenetrating Polymer Networks Constructed with Poly(Acrylic Acid) and Poly(N,N-Dimethylacrylamide)
T. Aoki (1994)
Swelling kinetics of polymers
H. Schott (1992)
The Preparation of Soluble Cellouronic Acid Sodium Salt by 4-Acetamide-TEMPO Mediated Oxidation of Ultrasound-Pretreated Parenchyma Cellulose from Bagasse Pith
X. Gao (2015)
Kinetics of swelling of polymers and their gels.
H. Schott (1992)
Fabrication of chitosan-g-poly(acrylamide)/CuS nanocomposite for controlled drug delivery and antibacterial activity.
Deepak Pathania (2016)
Characteristics of zwitterionic sulfobetaine acrylamide polymer and the hydrogels prepared by free-radical polymerization and effects of physical and chemical crosslinks on the UCST
Jinyan Ning (2013)
Poly (acrylic acid-co-acrylamide)/cellulose nanofibrils nanocomposite hydrogels: effects of CNFs content on the hydrogel properties
N. Mahfoudhi (2016)
Solute diffusion in swollen membranes
R. S. Harland (1987)
Isolation and Characterization of Cellulose Obtained from Bagasse Pith by Oxygen-Containing Agents
X. Gao (2014)
Characterization of blend hydrogels based on plasticized starch/cellulose acetate/carboxymethyl cellulose synthesized by electron beam irradiation
M. Senna (2016)
Transfer and degradation of polyacrylamide-based flocculants in hydrosystems: a review
A. Guézennec (2014)
Responsive polymers in controlled drug delivery
A. Bajpai (2008)
Patterns of the adsorption of bovine serum albumin on carboxymethyl dextran and carboxymethyl cellulose films
I. V. Paribok (2016)
Superabsorbent hydrogels based on polysaccharides for application in agriculture as soil conditioner and nutrient carrier: A review
M. Guilherme (2015)
This paper is referenced by
Flexible and low temperature resistant semi-IPN network gel polymer electrolyte membrane and its application in supercapacitor
M. Wang (2020)
Cellulose-based polymeric emulsifier stabilized poly(N-vinylcaprolactam) hydrogel with temperature and pH responsiveness.
X. Yang (2019)