← Back to Search
Performance Of Biodegradable Microcapsules Of Poly(butylene Succinate), Poly(butylene Succinate-co-adipate) And Poly(butylene Terephthalate-co-adipate) As Drug Encapsulation Systems.
Cornelia Theresa Brunner, E. Baran, E. D. Pinho, R. L. Reis, N. Neves
Published 2011 · Chemistry, Medicine
Download PDFAnalyze on Scholarcy
Poly(butylene succinate) (PBSu), poly(butylene succinate-co-adipate) (PBSA) and poly(butylene terephthalate-co-adipate) (PBTA) microcapsules were prepared by the double emulsion/solvent evaporation method. The effect of polymer and poly(vinyl alcohol) (PVA) concentration on the microcapsule morphologies, drug encapsulation efficiency (EE) and drug loading (DL) of bovine serum albumin (BSA) and all-trans retinoic acid (atRA) were all investigated. As a result, the sizes of PBSu, PBSA and PBTA microcapsules were increased significantly by varying polymer concentrations from 6 to 9%. atRA was encapsulated into the microcapsules with an high level of approximately 95% EE. The highest EE and DL of BSA were observed at 1% polymer concentration in values of 60 and 37%, respectively. 4% PVA was found as the optimum concentration and resulted in 75% EE and 14% DL of BSA. The BSA release from the capsules of PBSA was the longest, with 10% release in the first day and a steady release of 17% until the end of day 28. The release of atRA from PBSu microcapsules showed a zero-order profile for 2 weeks, keeping a steady release rate during 4 weeks with a 9% cumulative release. Similarly, the PBSA microcapsules showed a prolonged and a steady release of atRA during 6 weeks with 12% release. In the case of PBTA microcapsules, after a burst release of 10% in the first day, showed a parabolic release profile of atRA during 42 days, releasing 36% of atRA.
This paper references
PCL microspheres based functional scaffolds by bottom-up approach with predefined microstructural properties and release profiles.
A. Luciani (2008)
Synthesis and characterization of the biodegradable copolymers from succinic acid and adipic acid with 1,4-butanediol
B. D. Ahn (2001)
Stability of BSA encapsulated into PLGA microspheres using PAGE and capillary electrophoresis
M. Igartua (1998)
Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (HPMC).
J. Siepmann (2001)
All-trans-retinoic acid release from core-shell type nanoparticles of poly(epsilon-caprolactone)/poly(ethylene glycol) diblock copolymer.
Y. Jeong (2004)
Long-term delivery of all-trans-retinoic acid using biodegradable PLLA/PEG-PLLA blended microspheres.
Y. Choi (2001)
Comparison of the preparation of PLGA–BSA nano- and microparticles by PVA, poloxamer and PVP
T. Feczkó (2008)
Release behaviors of porous poly(butylene succinate)/poly(ɛ-caprolactone) microcapsules containing indomethacin
S. Park (2006)
How to achieve sustained and complete protein release from PLGA-based microparticles?
A. Giteau (2008)
Characteristics and properties of nanospheres co-loaded with lipophilic and hydrophilic drug models.
T. Hammady (2009)
Protein encapsulation and release from poly(lactide-co-glycolide) microspheres: effect of the protein and polymer properties and of the co-encapsulation of surfactants.
D. Blanco (1998)
Effect of WOW process parameters on morphology and burst release of FITC-dextran loaded PLGA microspheres.
S. Mao (2007)
Adhesion, proliferation, and osteogenic differentiation of a mouse mesenchymal stem cell line (BMC9) seeded on novel melt-based chitosan/polyester 3D porous scaffolds
A. Costa-Pinto (2008)
Poly(lactic-co-glycolic acid) electrospun fibrous meshes for the controlled release of retinoic acid.
D. Puppi (2010)
Rapid nitrification with immobilized cell using macro-porous cellulose carrier
M. Matsumura (1997)
Gas foamed open porous biodegradable polymeric microspheres.
T. Kim (2006)
Biodegradable microspheres for protein delivery.
V. Sinha (2003)
Microencapsulation by solvent evaporation: state of the art for process engineering approaches.
M. Li (2008)
Effect of slow-releasing all-trans-retinoic acid in bioabsorbable polymer on delayed adjustable strabismus surgery in a rabbit model.
M. J. Lee (2009)
Nanoencapsulation of nimodipine in novel biocompatible poly(propylene-co-butylene succinate) aliphatic copolyesters for sustained release
Sofia A. Papadimitriou (2009)
Methods to Assess in Vitro Drug Release from Injectable Polymeric Particulate Systems
Susan Dsouza (2005)
Bone morphogenetic proteins in tissue engineering: the road from laboratory to clinic, part II (BMP delivery)
P. Bessa (2008)
The effect of chitosan on the in vitro biological performance of chitosan-poly(butylene succinate) blends.
Daniela F. Coutinho (2008)
Microparticle formation and its mechanism in single and double emulsion solvent evaporation.
I. D. Rosca (2004)
Characterization on mixed-crystal structure and properties of poly (butylene adipate-co-terephthalate) biodegradable fibers
X. Shi (2005)
Preparation and evaluation of poly(3‐hydroxybutyrate) microspheres containing bovine serum albumin for controlled release
Y. Zhao (2008)
Solubility of retinoids in water.
E. Z. Szuts (1991)
Poly(hydroxybutyrate-co-hydroxyvalerate) nanocapsules as enzyme carriers for cancer therapy: an in vitro study
E. Baran (2002)
Formulation and in-vitro characterization of retinoic acid loaded poly (lactic-co-glycolic acid) microspheres
Y. Çırpanlı (2005)
Fabrication of biodegradable spheroidal microparticles for drug delivery applications.
M. Heslinga (2009)
Chemopreventive efficacy of all-trans-retinoic acid in biodegradable microspheres against epithelial cancers: results in a 4-nitroquinoline 1-oxide-induced oral carcinogenesis model.
Yongdoo Choi (2006)
Porous Chitosan Microcarriers for Large Scale Cultivation of Cells for Tissue Engineering: Fabrication and Evaluation
Guang-yuan Lu (2006)
Localized delivery of growth factors for bone repair.
V. Luginbuehl (2004)
Synthesis and biodegradation of aliphatic polyesters from dicarboxylic acids and diols
Changying Zhu (2003)
Controlled drug delivery in tissue engineering.
Marco Biondi (2008)
Preparation and characterization of protein-loaded poly(epsilon-caprolactone) microparticles for oral vaccine delivery.
M. Benoit (1999)
Controlled release from bioerodible polymers: effect of drug type and polymer composition.
Alexis Frank (2005)
Preparation and characterization of protein loaded microspheres based on a hydroxylated aliphatic polyester, poly(lactic-co-hydroxymethyl glycolic acid).
A. H. Ghassemi (2009)
Preparation and in vivo testing of porous alumina ceramics for cell carrier applications.
K. Eckert (2000)
Subacute toxicity of all‐trans‐retinoic acid loaded biodegradable microspheres in rats
Yongdoo Choi (2003)
Development of polymeric nanoparticulate drug delivery systems: evaluation of nanoparticles based on biotinylated poly(ethylene glycol) with sugar moiety.
I. Kim (2003)
The preparation and evaluation of poly(ϵ-caprolactone) microparticles containing both a lipophilic and a hydrophilic drug
M. H. Pérez (2000)
Vitamin-loaded electrospun cellulose acetate nanofiber mats as transdermal and dermal therapeutic agents of vitamin A acid and vitamin E.
P. Taepaiboon (2007)
Poly-ϵ-caprolactone microspheres and nanospheres: an overview
V. Sinha (2004)
Biochemical pathways of retinoid transport, metabolism, and signal transduction.
J. Napoli (1996)
Novel composite microparticles for protein stabilization and delivery.
A. Schoubben (2009)
Polymeric nanoparticles as delivery system for influenza virus glycoproteins.
D. Lemoine (1998)
Protein measurement with the Folin phenol reagent.
O. H. Lowry (1951)
Porous carriers for biomedical applications based on alginate hydrogels.
P. Eiselt (2000)
The preparation of sub-200 nm poly(lactide-co-glycolide) microspheres for site-specific drug delivery
P. Scholes (1993)
Materials in particulate form for tissue engineering. 2. Applications in bone
G. A. Silva (2007)
Assessment of the suitability of chitosan/polybutylene succinate scaffolds seeded with mouse mesenchymal progenitor cells for a cartilage tissue engineering approach.
J. T. Oliveira (2008)
Formulation parameters determining the physicochemical characteristics of solid lipid nanoparticles loaded with all-trans retinoic acid.
Soo-Jeong Lim (2002)
Influences of process parameters on nanoparticle preparation performed by a double emulsion pressure homogenization technique.
A. Lamprecht (2000)
A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding.
M. M. Bradford (1976)
Protein encapsulation in biodegradable amphiphilic microspheres.
P. Bouillot (1999)
Structural modeling of drug release from biodegradable porous matrices based on a combined diffusion/erosion process.
Valérie Lemaire (2003)
Mathematical modeling and simulation of drug release from microspheres: Implications to drug delivery systems.
D. Y. Arifin (2006)
Influence of process parameters on microcapsules loaded with n-hexadecane prepared by in situ polymerization
F. Salaün (2009)
This paper is referenced by
Review on PCL, PBS, and PCL/PBS blends containing carbon nanotubes.
T. P. Gumede (2018)
Microcapsules as a Drug Delivery System
Younis Abed (2014)
Novel Biodegradable and Double Crystalline Multiblock Copolymers Comprising of Poly(butylene succinate) and Poly(ε-caprolactone): Synthesis, Characterization, and Properties
Liuchun Zheng (2012)
Current progress on bio-based polymers and their future trends
Ramesh P. Babu (2013)
Design of a minimally processed juice added with micro and nanocapsules of folic acid and its use as vehicle for ingestion in wistar rats
V. Santacruz-Vázquez (2013)
Preparation of Polymer Microparticles through Nonaqueous Suspension Polycondensations. Part II—Effects of Operating Variables on Properties of Poly(butylene succinate)
Luciana M. Dutra (2018)
Biosynthesis of polyesters and polyamide building blocks using microbial fermentation and biotransformation
S. Bhatia (2016)
Preparation of poly(butylene succinate)‐poly[2‐(dimethylamino)ethyl methacrylate] copolymers and their applications as carriers for drug delivery
Yuping Zhao (2018)
Intertwining lamellar assembly in porous spherulites composed of two ring-banded poly(ethylene adipate) and poly(butylene adipate).
G. Lugito (2015)
Preparation and Characterization of Microcapsules from PBSL/VMF2 Nanocomposite
M. Silva-Valenzuela (2016)
Facile fabrication of biocompatible PLGA drug-carrying microspheres by O/W pickering emulsions.
Zengjiang Wei (2012)
Fabrication of Fucoxanthin-Loaded Microsphere(F-LM) By Two Steps Double-Emulsion Solvent Evaporation Method and Characterization of Fucoxanthin before and after Microencapsulation.
D. Noviendri (2016)
Synthesis and Characterization of PEG‐PBS Copolymers to Obtain Microspheres With Different Naproxen Release Profiles
J. Ramón (2018)
Pulmonary Delivery of Proteins Using Nanocomposite Microcarriers.
Iman M. Alfagih (2015)
Micro/nanoparticles fabricated with triblock PLLA-based copolymers containing PEG-like subunit for controlled drug release: Effect of chemical structure and molecular architecture on drug release profile
Giulia Guidotti (2020)
Preparation of biodegradable poly(butylene succinate)/halloysite nanotube nanocomposite foams using supercritical CO2 as blowing agent
W. Wu (2015)
Preparation of New Risperidone Depot Microspheres Based on Novel Biocompatible Poly(Alkylene Adipate) Polyesters as Long-Acting Injectable Formulations.
S. Nanaki (2018)
Thermal properties and crystallinity of PCL/PBSA/cellulose nanocrystals grafted with PCL chains
J. A. Simão (2017)
Enhanced oral bioavailability of paclitaxel in pluronic/LHR mixed polymeric micelles: preparation, in vitro and in vivo evaluation.
Fatima Zohra Dahmani (2012)
Preparation of embolic NEMs loading capecitabine
Yuangang Liu (2012)
Mechanical properties, morphology and crystallization kinetic studies of bio-based thermoplastic composites of poly(butylene succinate) with recycled carbon fiber
H. Han (2013)
Bioremediation Enhancement of Marine Sediments Contaminated by Crude Oil with Biogenic Pollutants Mobilizing Agents and Biosurfactants
A. Rosato (2017)
Optimization and Formulation of Fucoxanthin-Loaded Microsphere (F-LM) Using Response Surface Methodology (RSM) and Analysis of Its Fucoxanthin Release Profile
I. Jaswir (2019)
PULMONARY DELIVERY OF PNEUMOCCOCAL VACCINE USING NANOCOMPOSITE MICROPARTICLE CARRIERS VIA DRY POWDER INHALATION
Iman M. Alfagih (2015)
Synthesis and chemical modification of poly(butylene succinate) with rutin useful to the release of silybin
L. P. Ferreira (2017)
Fabrication of micelles from poly(butylene succinate) and poly(2‐methacryloyloxyethyl phosphorylcholine) copolymers as a potential drug carrier
Yucheng Zhang (2018)
L-Arabinose (pyranose and furanose rings)-branched poly (vinylalcohol): enzymatic synthesis of the sugar esters followed by free radical polymerization.
Maurício Rodrigues Borges (2014)