Online citations, reference lists, and bibliographies.
← Back to Search

Characterization On Chemical And Mechanical Properties Of Silane Treated Fish Tail Palm Fibres

P. Sabarinathan, K. Rajkumar, V. Annamalai, K. Vishal
Published 2020 · Materials Science, Medicine

Cite This
Download PDF
Analyze on Scholarcy
Share
A novel cellulosic fibre was extracted from the peduncle portion of the fish tail palm tree and the extracted fish tail palm fibre was treated with different concentrations (1%, 5%, and 9%) of silane solution. The characteristic analysis on chemical, functional, mechanical and surface property of the extracted fish tail palm fibres were investigated through chemical composition analysis, Fourier Transform InfraRed spectroscopy (FT-IR), single fibre tensile test, and Scanning Electron Microscopy (SEM). Chemical analysis results indicate that silane treatment improved the cellulose content of the fish tail palm fibre. The highest cellulose content of 72.51% was observed in the 9% silane treated fish tail palm fibre. Also, it improved crystallinity index value of 62.5% for 5% silane treated fibre, which is confirmed through the X-ray diffraction analysis. FT-IR result indicates the removal of hemicellulose at characteristic wavelength of 1745 cm−1 for 5% silane treated fish tail palm fibre. Tensile property of the silane treated fish tail palm fibre (1, 5, and 9%) shows an increased tensile strength of 7.3%, 12%, and 6.6% as compared to raw fish tail palm fibre. Moreover, this type of novel natural fibres can reduce the cost while offering competent performance during the polymer-based product development.
This paper references
10.1016/j.ijbiomac.2020.08.111
Characterization of natural cellulosic fibers from Nendran Banana Peduncle plants.
P. Manimaran (2020)
10.1002/PC.25239
Fabrication of waste bagasse fiber‐reinforced epoxy composites: Study of physical, mechanical, and erosion properties
T. Singh (2019)
10.1016/j.ijbiomac.2019.09.094
Characterization of a new cellulosic natural fiber extracted from the root of Ficus religiosa tree.
A. M. Moshi (2019)
10.1016/J.INDCROP.2014.10.042
Comparative study of 12 pineapple leaf fiber varieties for use as mechanical reinforcement in polymer composites
A. R. S. Neto (2015)
10.1088/2053-1591/AADBE6
Influence of woven bast-leaf hybrid fiber on the physico-mechanical and sliding wear performance of epoxy based polymer composites
S. Kumar (2018)
10.1177/0954406218823229
Evaluation of thermal stability and damping behavior of electrical insulator waste reinforced thermoset polymer composite
P. Sabarinathan (2019)
10.1016/j.jclepro.2020.120978
Renewable and sustainable biobased materials: An assessment on biofibers, biofilms, biopolymers and biocomposites
A. Vinod (2020)
10.1016/J.JCLEPRO.2013.10.050
Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry
F. Al-Oqla (2014)
10.1080/15440478.2020.1758281
Extraction and Characterization of Natural Fibers from Citrullus lanatus Climber
Anish Khan (2020)
10.1142/S0218625X07010561
THE EFFECT OF OIL PALM FIBERS AS REINFORCEMENT ON TRIBOLOGICAL PERFORMANCE OF POLYESTER COMPOSITE
B. F. Yousif (2007)
Bioresource technology physico-mechanical properties of chemically treated palm and coir fiber reinforced polypropylene composites
M. Haque (2009)
Sarkhel, Fabrication, characterization, and evaluation of Luffa cylindrica fiber reinforced epoxy composites
S K Saw (2013)
10.1016/j.carbpol.2018.04.127
Characterization of untreated and alkali treated new cellulosic fiber from an Areca palm leaf stalk as potential reinforcement in polymer composites.
S. N (2018)
10.1016/S0891-5849(98)00315-3
Antioxidant activity applying an improved ABTS radical cation decolorization assay.
R. Re (1999)
Mechanical
T. A. Negawo (2019)
Chemical modification of hemp
L. Y. Mwaikambo (2002)
10.1016/j.biortech.2009.04.072
Physico-mechanical properties of chemically treated palm and coir fiber reinforced polypropylene composites.
Md. Mominul Haque (2009)
10.1080/15440478.2017.1304314
Characterization of New Natural Cellulosic Fiber from the Bark of Dichrostachys Cinerea
P. Baskaran (2018)
10.15376/BIORES.8.4.4805-4826
Fabrication, Characterization, and Evaluation of Luffa cylindrica Fiber Reinforced Epoxy Composites
S. Saw (2013)
10.1007/s42765-020-00044-w
Superabsorbent Fibers for Comfortable Disposable Medical Protective Clothing
Lin Yang (2020)
10.1016/J.CARBPOL.2009.10.046
Characterization of new natural cellulosic fabric Grewia tilifolia
J. Jayaramudu (2010)
10.1016/J.WEAR.2009.06.002
Potential of kenaf fibres as reinforcement for tribological applications
C. Chin (2009)
10.1533/9780857090348.171
Development of Surgical Clothing from Bamboo Fibres
K. Ramachandralu (2010)
10.1002/BBB.1360
Product developments in the bio‐based chemicals arena
E. Jong (2012)
10.1016/J.COMPOSITESA.2011.03.008
Effect of various chemical treatments on the fibre structure and tensile properties of industrial hemp fibres
M. A. Sawpan (2011)
10.1177/1464420719849616
Tailoring of tensile and dynamic thermomechanical properties of interleaved chemical-treated fine almond shell particulate flax fiber stacked vinyl ester polymeric composites
K. Ramraji (2019)
10.1016/j.jclepro.2020.122154
Development of comfortable and eco-friendly cellulose based textiles with improved sustainability
M. Novakovic (2020)
10.1016/J.APSUSC.2013.11.024
Improving degradation resistance of sisal fiber in concrete through fiber surface treatment
Jianqiang Wei (2014)
10.1016/j.carbpol.2014.02.016
Characterization of a new natural fiber from Arundo donax L. as potential reinforcement of polymer composites.
V. Fiore (2014)
Fabrication , characterization , and evaluation of Luffa cylindrica fi ber reinforced epoxy composites
R. Purwar (2013)
10.1080/15440478.2014.984046
Study of the Mechanical Properties of Fibers Extracted from Tunisian Agave americana L.
S. Msahli (2015)
10.1016/J.COMPOSITESB.2014.08.047
Effect of fiber loading on the properties of treated cellulose fiber-reinforced phenolic composites
E. Rojo (2015)
10.1080/15440478.2018.1453432
Characterization of natural cellulosic fiber from bark of Albizia amara
P. Senthamaraikannan (2019)
10.1016/J.COMPOSITESB.2012.04.053
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
M. Kabir (2012)
10.1016/J.COMPOSITESA.2008.03.010
Engineering and evaluation of hemp fibre reinforced polypropylene composites: Fibre treatment and matrix modification
G. Beckermann (2008)
10.1016/j.carbpol.2015.08.024
Characterization of new natural cellulosic fiber from Lygeum spartum L.
Z. Belouadah (2015)
10.1515/9783111548050-024
M
M. Sankar (1824)
10.1177/0954406220922257
Mechanical and free vibration properties of skin and core designed basalt woven intertwined with flax layered polymeric laminates
K. Ramraji (2020)
10.1016/J.COMPOSITESB.2012.05.002
Investigation of physical, chemical and mechanical properties of raw and alkali treated Borassus fruit fiber
L. Boopathi (2012)
10.1016/J.COMPOSITESB.2012.04.075
Tensile and structural characterization of alkali treated Borassus fruit fine fibers
K. Reddy (2013)
10.1002/APP.34530
Chemical modification of hemp fibers by silane coupling agents
A. Rachini (2012)
10.1016/J.COMPOSITESA.2012.05.007
Effect of fiber surface treatments on mechanical and abrasive wear performance of polylactide/jute composites
B. K. Goriparthi (2012)
10.1016/J.COMPOSITESB.2016.06.055
Interface and bonding mechanisms of plant fibre composites: An overview
Y. Zhou (2016)
10.1002/APP.10460
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
L. Y. Mwaikambo (2002)
10.1016/J.INDCROP.2014.11.048
Influence of alkali treatment on internal microstructure and tensile properties of abaca fibers
M. Cai (2015)
10.1007/s10924-019-01526-8
A New Study on Characterization and Properties of Natural Fibers Obtained from Olive Tree (Olea europaea L.) Residues
Basheer A Alshammari (2019)
10.1016/j.jmrt.2020.01.091
Characterization of alkali treated new cellulosic fibre from Cyrtostachys renda
T. M. Loganathan (2020)
10.1177/004051755902901003
An Empirical Method for Estimating the Degree of Crystallinity of Native Cellulose Using the X-Ray Diffractometer
L. Segal (1959)
10.1080/15685543.2013.816652
Characterization of new cellulose sansevieria ehrenbergii fibers for polymer composites
T. Sathishkumar (2013)
10.1016/j.carbpol.2017.06.065
Characterization of alkali treated and untreated new cellulosic fiber from Saharan aloe vera cactus leaves.
Balaji A N (2017)
10.1016/j.carbpol.2014.09.072
Characterization of new natural cellulosic fiber from Cissus quadrangularis stem.
S. Indran (2015)
10.1515/9783111576855-016
K
Martin P. Catherwood (1824)
Chemical modi fi cation of hemp , sisal , jute , and kapok fi bers by alkalization
M. P. Ansell Mwaikambo (2002)
10.1016/J.JIEC.2007.07.002
Mechanical properties of silanized jute–polypropylene composites
C. Hong (2008)
SC
N. Shanmugasundaram (2018)
Fabrication
S. K. Saw (2013)
Investigation of physical
L. Boopathi (2012)
Determination of Structural Carbohydrates and Lignin in Biomass
Amie D. Sluiter (2004)
10.1007/S10853-006-1138-9
Study of the hydrolysis and condensation of γ-Aminopropyltriethoxysilane by FT-IR spectroscopy
R. Peña-Alonso (2007)
10.1080/15440478.2018.1434851
Synthesis and characterization of cellulosic fiber from red banana peduncle as reinforcement for potential applications
P. Manimaran (2019)
10.1016/j.ijbiomac.2018.12.056
Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens.
R. Vijay (2019)
10.1080/15440478.2020.1758865
Characterization of New Cellulosic Cyrtostachys renda and Ptychosperma macarthurii Fibers from Landscaping Plants
T. M. Loganathan (2020)
10.1002/pc.25621
Static and dynamic behavior of micrometric agro Prunus amygdalus particulate distributed interpolymer layer‐kenaf composite
P. Sabarinathan (2020)
10.1002/APP.39148
Characterization and modeling of the moisture diffusion behavior of natural fibers
A. Célino (2013)
10.1016/J.JCIS.2003.09.044
Modification of cellulose fibres with organosilanes: Under what conditions does coupling occur?
M. Castellano (2004)
10.1016/J.COMPSTRUCT.2018.09.043
Mechanical, morphological, structural and dynamic mechanical properties of alkali treated Ensete stem fibers reinforced unsaturated polyester composites
Tolera A. Negawo (2019)
10.1007/s10971-015-3620-9
Hybrid sol–gel coating agents based on zirconium(IV) propoxide and epoxysilane
I. Milošev (2015)
10.1016/j.ijbiomac.2020.02.134
Characterization of a novel natural cellulosic fiber from Calotropis gigantea fruit bunch for ecofriendly polymer composites.
P. Narayanasamy (2020)
10.1016/j.carbpol.2018.01.072
Characterization of raw and alkali treated new natural cellulosic fiber from Coccinia grandis.L.
P. Senthamaraikannan (2018)
Static and dynamic behavior of micrometric agro Jo ur na l P re -p ro of Journal Pre-proof Prunus amygdalus particulate distributed interpolymer layer-kenaf composite
P. Sabarinathan (2020)
10.1016/j.carbpol.2014.04.051
Characterization of new natural cellulosic fiber from Cissus quadrangularis root.
S. Indran (2014)
10.1016/J.COMPOSITESB.2014.09.010
Comparative evaluation between E-Glass and hemp fiber composites application in rotorcraft interiors
C. Scarponi (2015)
10.1016/J.CARBPOL.2019.04.088
Characterization of silane treated and untreated natural cellulosic fibre from corn stalk waste as potential reinforcement in polymer composites.
Y. Liu (2019)
10.1016/J.COMPOSITESB.2009.04.018
Characterization of treated date palm tree fiber as composite reinforcement
A. Alawar (2009)
10.1016/J.CARBPOL.2011.04.043
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
M. Jawaid (2011)
10.1002/APP.29412
Comparison of the thermal degradation of natural, alkali‐treated and silane‐treated hemp fibers under air and an inert atmosphere
A. Rachini (2009)



Semantic Scholar Logo Some data provided by SemanticScholar