← Back to Search
Development, Mechanical Evaluation And Surface Characteristics Of Chitosan/polyvinyl Alcohol Based Polymer Composite Coatings On Titanium Metal.
S. Mishra, S. Kannan
Published 2014 · Materials Science, Medicine
Save to my Library
Download PDFAnalyze on Scholarcy
Mechanical properties of orthopedic implants play important role in the regeneration and cell growth of the diseased body part. The present investigation was aimed at the development of a biocompatible, biodegradable and mechanically stable coating of chitosan (CS)-polyvinyl alcohol (PVA) polymer composite on Titanium (Ti) metal by employing a simple methodology at ambient conditions. The PVA to CS concentrations were maintained in fixed ratios of 1:4 weight/weight (w/w) for the development of all the coatings on Ti metal. Four different concentrations of the polymers ranging in the order of 5%, 10%, 15% and 20% weight/volume (w/v) solution of CS were selected in an aim to test their efficacy on mechanical stability. The results obtained from the analysis confirmed considerable improvement in mechanical properties of the composite polymer film comprising CS and PVA on Ti metal with the four different concentrations showing variable elastic modulus and hardness. The difference in mechanical properties of both dehydrated and hydrated coatings demonstrates the effective and efficient shielding of high mechanical properties of Ti metal in physiological conditions. The scratch tests performed on the coated specimens also indicated a good adhesion of the polymer on the Ti metal surface.
This paper references
Different approaches to superhard coatings and nanocomposites
S. Vepřek (2005)
Nanometer surface roughness increases select osteoblast adhesion on carbon nanofiber compacts.
R. L. Price (2004)
In vitro characterisation of chitosan based xerogels for potential buccal delivery of proteins.
I. Ayensu (2012)
Characteristics of Different Molecular Weight Chitosan Films Affected by the Type of Organic Solvents
S. Y. Park (2002)
Hyperelastic mechanical behavior of chitosan hydrogels for nucleus pulposus replacement-experimental testing and constitutive modeling.
A. Sasson (2012)
Chitin and chitosan polymers: Chemistry, solubility and fiber formation
C. K. S. Pillai (2009)
Addition of chitosan to silicate cross-linked PEO for tuning osteoblast cell adhesion and mineralization.
A. Gaharwar (2010)
The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus.
K. Choi (1990)
Mechanical Response of Polymers: An Introduction
A. Wineman (2000)
Preparation and characterization of CdS quantum dots chitosan biocomposite
Zhan Li (2003)
Chitosan: a versatile biopolymer for orthopaedic tissue-engineering.
A. Di Martino (2005)
Novel thiolated carboxymethyl chitosan-g-β-cyclodextrin as mucoadhesive hydrophobic drug delivery carriers
M. Prabaharan (2008)
Osteoblast responses to collagen-PVA bioartificial polymers in vitro: the effects of cross-linking method and collagen content.
C. Scotchford (1998)
Nanofibers from blends of polyvinyl alcohol and polyhydroxy butyrate as potential scaffold material for tissue engineering of skin.
A. Asran (2010)
Analytical techniques for indentation of viscoelastic materials
M. Oyen (2006)
Nano and micro mechanical properties of uncross-linked and cross-linked chitosan films.
Ashkan Aryaei (2012)
Materials Properties Handbook: Titanium Alloys
R. Boyer (1994)
Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation.
J. Rho (1997)
Effects of hydrophilic plasticizers on mechanical, thermal, and surface properties of chitosan films.
N. E. Suyatma (2005)
Development of Uniform Chitosan Thin-Film Layers on Silicon Chips
F. Ligler (2001)
Mechanical properties and the hierarchical structure of bone.
J. Rho (1998)
Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements.
J. Rho (1993)
An improved technique for determining hardness and elastic-modulus using load and displacement sensi
W. Oliver (1992)
Critical review of analysis and interpretation of nanoindentation test data
A. Fischer-Cripps (2006)
Chitosan-alginate hybrid scaffolds for bone tissue engineering.
Z. Li (2005)
Novel anodization technique using a block copolymer template for nanopatterning of titanium implant surfaces.
Terje Sjöström (2012)
Nanoindentation studies of materials
C. Schuh (2006)
i) Mechanical factors influencing the outcome of total joint replacement
S. J. Hollister (1995)
Complex nanoparticles based on chitosan and ionic/nonionic strong polyanions: formation, stability, and application.
E. Dragan (2009)
Development and mechanical characterization of solvent-cast polymeric films as potential drug delivery systems to mucosal surfaces
J. Boateng (2009)
Physical, structural and antimicrobial properties of poly vinyl alcohol-chitosan biodegradable films
Jeannine Bonilla (2014)
Blends of polyolefin/PMMA for improved scratch resistance, adhesion and compatibility
Jie Song (2012)
A water-soluble methylated N-(4-N,N-dimethylaminocinnamyl) chitosan chloride as novel mucoadhesive polymeric nanocomplex platform for sustained-release drug delivery
Maleenart Petchsangsai (2011)
This paper is referenced by
Electrophoretic deposition of polyvinyl alcohol/natural chitosan/bioactive glass composite coatings on 316L stainless steel for biomedical application
Ehsan Vafa (2021)
Investigation of the effect of laponite and crosslinkers on thermal, mechanical, swelling and conductive properties of the phtagel composite films
S. Ekici (2017)
Preparation and Application of the Composite from Chitosan
C. Yu (2017)
Finite element simulation for the mechanical characterization of soft biological materials by atomic force microscopy.
C. Valero (2016)
Titanium Coating with Hydroxyapatite and Chitosan Doped with Silver Nitrate
L. L. Sousa (2018)
Helicoidally Arranged Polyacrylonitrile Fiber-Reinforced Strong and Impact-Resistant Thin Polyvinyl Alcohol Film Enabled by Electrospinning-Based Additive Manufacturing
Rahul Sahay (2020)
N-octyl chitosan derivatives as amphiphilic carrier agents for herbicide formulations
A. Kamari (2019)
Production of chitosan coatings on metal and ceramic biomaterials
H. Avilez (2017)
In vivo bone regeneration analysis of trilayer coated 316L stainless steel implant in rabbit model
Priyanka Majee (2018)
Development of porous Ti6Al4V/chitosan sponge composite scaffold for orthopedic applications.
Miao Guo (2016)
Electrospun Micro and Nanofibres of Olive Oil and Polyvinilic Alcohol
Verónica Santacruz (2017)
Surface functionalization of chitosan as a coating material for orthopaedic applications: A comprehensive review.
S. Kumari (2021)
N,N-dimethylhexadecyl carboxymethyl chitosan as a potential carrier agent for rotenone.
A. Kamari (2016)
Effect of plasticizer and surfactant on the properties of poly(vinyl alcohol)/chitosan films.
N. Stachowiak (2020)
Mechanically tuned nanocomposite coating on titanium metal with integrated properties of biofilm inhibition, cell proliferation, and sustained drug delivery.
S. Mishra (2017)
Preparation, characterization, and evaluation of 3,6-O-N-acetylethylenediamine modified chitosan as potential antimicrobial wound dressing material.
Qifeng Dang (2018)
Novel three-dimensional interphase characterisation of polymer nanocomposites using nanoscaled topography.
Mohanad Mousa (2018)
N-hexanoyl-O-glycol chitosan as a carrier agent for water-insoluble herbicide
S. M. Yusoff (2018)
Improving the ionic conductivity in nanostructured membranes based on poly(vinyl alcohol) (PVA), chitosan (CS), phosphoric acid (H3PO4), and niobium oxide (Nb2O5)
D. A. Quintana (2018)
In Situ Impregnation of Silver Nanoclusters in Microporous Chitosan-PEG Membranes as an Antibacterial and Drug Delivery Percutaneous Device.
S. Mishra (2016)
N‐deoxycholic acid‐O‐glycol chitosan as a potential carrier agent for botanical pesticide rotenone
S. M. Yusoff (2018)
Elastic Behavior of Nanophases in Polyvinyl Alcohol (PVA)/Bamboo Charcoal (BC) Nanocomposite Films
Mohanad Mousa (2018)
Copper incorporated microporous chitosan-polyethylene glycol hydrogels loaded with naproxen for effective drug release and anti-infection wound dressing.
S. Mishra (2017)
Effects of the Origin and Deacetylation Degree of Chitosan on Properties of Its Coatings on Titanium
M. Supernak-Marczewska (2020)
Antibacterial and cytocompatible nanotextured Ti surface incorporating silver via single step hydrothermal processing.
A. Mohandas (2017)
Synthesis, characterisation and potential application of deoxycholic acid carboxymethyl chitosan as a carrier agent for rotenone
N. F. A. Aljafree (2018)
Preparation of a novel biodegradable packaging film based on corn starch-chitosan and poloxamers.
Abril Fonseca-García (2021)
Study of corrosion behavior of the biodegradable chitosan-polyvinyl alcohol coatings on AA8011 aluminum alloy
H. Hassannejad (2019)
Recent coating developments for combination devices in orthopedic and dental applications: A literature review☆
Eric J Tobin (2017)
Titanium coating: introducing an antibacterial and bioactive chitosan-alginate film on titanium by spin coating
Nasim Vakili (2020)
The Roll of NaPSS Surfactant on the Ceria Nanoparticles Embedding in Polypyrrole Films
S. Popescu (2016)