Please confirm you are human (Sign Up for free to never see this)
← Back to Search
Surface-initiated Hyperbranched Polyglycerol As An Ultralow-fouling Coating On Glass, Silicon, And Porous Silicon Substrates.
Eli K Moore, B. Delalat, R. Vasani, Gordon Mcphee, H. Thissen, N. Voelcker
Published 2014 · Materials Science, Medicine
Save to my Library
Download PDFAnalyze on Scholarcy
Anionic ring-opening polymerization of glycidol was initiated from activated glass, silicon, and porous silicon substrates to yield thin, ultralow-fouling hyperbranched polyglycerol (HPG) graft polymer coatings. Substrates were activated by deprotonation of surface-bound silanol functionalities. HPG polymerization was initiated upon the addition of freshly distilled glycidol to yield films in the nanometer thickness range. X-ray photoelectron spectroscopy, contact angle measurements, and ellipsometry were used to characterize the resulting coatings. The antifouling properties of HPG-coated surfaces were evaluated in terms of protein adsorption and the attachment of mammalian cells. The adsorption of bovine serum albumin and collagen type I was found to be reduced by as much as 97 and 91%, respectively, in comparison to untreated surfaces. Human glioblastoma and mouse fibroblast attachment was reduced by 99 and 98%, respectively. HPG-grafted substrates outperformed polyethylene glycol (PEG) grafted substrates of comparable thickness under the same incubation conditions. Our results demonstrate the effectiveness of antifouling HPG graft polymer coatings on a selected range of substrate materials and open the door for their use in biomedical applications.
This paper references
Study of single protein adsorption onto monoamino oligoglycerol derivatives: a structure-activity relationship.
M. Wyszogrodzka (2009)
Surface engineering for long-term culturing of mesenchymal stem cell microarrays.
Soraya Rasi Ghaemi (2013)
Gold nanoparticles coated with a thermosensitive hyperbranched polyelectrolyte: towards smart temperature and pH nanosensors.
Y. Shen (2008)
Polyethylene oxide surfaces of variable chain density by chemisorption of PEO-thiol on gold: adsorption of proteins from plasma studied by radiolabelling and immunoblotting.
L. Unsworth (2005)
Effects of thermal oxidation on the photoluminescence properties of porous silicon
T. Nakamura (2010)
A novel cationic‐peptide coating for the prevention of microbial colonization on contact lenses
M. Willcox (2008)
Analysis of brush-particle interactions using self-consistent-field theory.
B. M. Steels (2000)
In vivo performance of melimine as an antimicrobial coating for contact lenses in models of CLARE and CLPU.
N. Cole (2010)
Effects of cloud-point grafting, chain length, and density of PEG layers on competitive adsorption of ocular proteins.
P. Kingshott (2002)
The influence of poly(ethylene oxide) grafting via siloxane tethers on protein adsorption.
R. Murthy (2009)
Effect of molecular weight on synthesis and surface morphology of high-density poly(ethylene glycol) grafted layers.
B. Zdyrko (2004)
Self-assembled monothiol-terminated hyperbranched polyglycerols on a gold surface: a comparative study on the structure, morphology, and protein adsorption characteristics with linear poly(ethylene glycol)s.
Po-Ying J Yeh (2008)
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Robert N. Wenzel (1936)
The role of independently variable grafting density and layer thickness of polymer nanolayers on peptide adsorption and cell adhesion.
Nripen Singh (2007)
Wetting of thin layers of SiO2 by water
R. Williams (1974)
Synthesis and characterization of glycerol dendrons, self-assembled monolayers on gold: a detailed study of their protein resistance.
M. Wyszogrodzka (2009)
Prevention of protein adsorption by flexible and rigid chain molecules.
Etching of Silicon by the RCA Standard Clean 1
G. Celler (1999)
Comparative study of surface morphology of copper phthalocyanine ultra thin films deposited on Si (111) native and RCA-cleaned substrates
M. Krzywiecki (2012)
Engineering protein and cell adhesivity using PEO-terminated triblock polymers.
Valerie A. Liu (2002)
Chemical patterning of ultrathin polymer films by direct-write multiphoton lithography.
H. Jeon (2011)
Evaluation of mammalian cell adhesion on surface-modified porous silicon.
S. Low (2006)
Reduced nonspecific adsorption on covalently immobilized protein surfaces using poly(ethylene oxide) containing blocking agents.
F. Frederix (2004)
Multifunctional polymer coatings for cell microarray applications.
Mahaveer D. Kurkuri (2009)
“Non‐Fouling” Oligo(ethylene glycol)‐ Functionalized Polymer Brushes Synthesized by Surface‐Initiated Atom Transfer Radical Polymerization
Hongwei Ma (2004)
XPS and AFM analysis of antifouling PEG interfaces for microfabricated silicon biosensors.
S. Sharma (2004)
Hyperbranched polyglycerols at the biointerface
Eli D. Moore (2013)
Surface chemistry of porous silicon and implications for drug encapsulation and delivery applications.
K. Jarvis (2012)
Cell fouling resistance of polymer brushes grafted from ti substrates by surface-initiated polymerization: effect of ethylene glycol side chain length.
X. Fan (2006)
Clinical observations of biofouling on PEO coated silicone hydrogel contact lenses.
H. Thissen (2010)
Advanced substrate fabrication for cell microarrays.
A. Hook (2009)
Self-assembled monolayers and polymer brushes in biotechnology: current applications and future perspectives.
W. Senaratne (2005)
Poly(oligo(ethylene glycol)acrylamide) brushes by surface initiated polymerization: effect of macromonomer chain length on brush growth and protein adsorption from blood plasma.
J. Kizhakkedathu (2009)
Micropatterned arrays of porous silicon: toward sensory biointerfaces.
B. Flavel (2011)
Graft Polymerization of Anti-Fouling PEO Surfaces by Liquid-Free Initiated Chemical Vapor Deposition
R. K. Bose (2012)
Patterning and biofunctionalization of antifouling hyperbranched polyglycerol coatings.
Eli D. Moore (2014)
Antibacterial surfaces for biomedical devices
K. Vasilev (2009)
Poly(ethylene glycol)-modified Nanocarriers for Tumor-targeted and Intracellular Delivery
L. E. V. Vlerken (2007)
The Synthesis and Structure of Organosilanols
P. D. Lickiss (1995)
Effect of the physicochemical properties of poly(ethylene glycol) brushes on their binding to cells.
Cathy E McNamee (2007)
Mapping the Ligand-binding Sites and Disease-associated Mutations on the Most Abundant Protein in the Human, Type I Collagen*
G. D. Di Lullo (2002)
Antimicrobial surfaces and their potential in reducing the role of the inanimate environment in the incidence of hospital-acquired infections
Kristopher Page (2009)
Stimulus-responsiveness and drug release from porous silicon films ATRP-grafted with poly(N-isopropylacrylamide).
R. Vasani (2011)
Poly(ethylene oxide)/poly(butylene terephthalate) segmented block copolymers: the effect of copolymer composition on physical properties and degradation behavior
A. A. Deschamps (2001)
Hyperbranched Polyglycidol on Si/SiO2 Surfaces via Surface-Initiated Polymerization
Majad Khan (2003)
New class of ultrathin, highly cell-adhesion-resistant polyelectrolyte multilayers with micropatterning capabilities.
S. Y. Yang (2003)
Interaction of human serum albumin with membranes containing polymer-grafted lipids: spin-label ESR studies in the mushroom and brush regimes.
R. Bartucci (2002)
Linear and Hyperbranched Polyglycerol Derivatives as Excellent Bioinert Glass Coating Materials
Marie Weinhart (2011)
In Pursuit of Zero: Polymer Brushes that Resist the Adsorption of Proteins
A. Hucknall (2009)
An Approach to Core−Shell-Type Architectures in Hyperbranched Polyglycerols by Selective Chemical Differentiation
R. Haag (2000)
Controlled Synthesis of Hyperbranched Polyglycerols by Ring-Opening Multibranching Polymerization
A. Sunder (1999)
Self-assembled monolayers of dendritic polyglycerol derivatives on gold that resist the adsorption of proteins.
Conrad Siegers (2004)
Antifouling coatings: recent developments in the design of surfaces that prevent fouling by proteins, bacteria, and marine organisms.
I. Banerjee (2011)
Polymer Brushes that Resist Adsorption of Model Proteins: Design Parameters
A. Halperin (1999)
Surface modification of polymeric biomaterials with poly(ethylene oxide), albumin, and heparin for reduced thrombogenicity.
M. Amiji (1993)
Study of the optical properties of a thermoresponsive polymer grafted onto porous silicon scaffolds
S. Pace (2013)
Self-sterilizing and self-cleaning of silicone catheters coated with TiO(2) photocatalyst thin films: a preclinical work.
Y. Ohko (2001)
Antimicrobial and antifouling hydrogels formed in situ from polycarbonate and poly(ethylene glycol) via Michael addition.
Shao Qiong Liu (2012)
On the adsorption process in polymer brushes : A Monte Carlo study
A. Kopf (1996)
This paper is referenced by
Universal Polymer Coatings with Tailorable Bioinert and Biospecific Function
J. Spatz (2018)
Multiple and terminal grafting of linear polyglycidol for surfaces of reduced protein adsorption
Alicja Utrata-Wesołek (2016)
Tunable intramolecular cyclization and glass transition temperature of hyperbranched polymers by regulating monomer reactivity
Qingfu Ban (2017)
A Clean and Simple Route to Soft, Biocompatible Nanocapsules via UV-Cross-Linkable Azido-Hyperbranched Polyglycerol
James Iocozzia (2017)
Photoregulating Antifouling and Bioadhesion Functional Coating Surface Based on Spiropyran.
Leixiao Yu (2018)
Exploiting a new glycerol-based copolymer as a route to wound healing: Synthesis, characterization and biocompatibility assessment.
E. De Giglio (2015)
Functionalization of Magnetic Nanoparticles by Folate as Potential MRI Contrast Agent for Breast Cancer Diagnostics
Hamid Heydari Sheikh Hossein (2020)
Human aortic endothelial cell morphology influenced by topography of porous silicon substrates
P. Formentin (2015)
Hyperbranched Polyglycerols as Robust Up-Conversion Nanoparticle Coating Layer for Feasible Cell Imaging
Mingcong Hao (2020)
Light‐triggered antifouling coatings for porous silicon optical transducers
Y. Bussi (2017)
Hard and soft nanocomposites enabled by rationally designed nonlinear copolymers derived from high functionality polyols
James Iocozzia (2018)
Branched polyglycidol and its derivatives grafted-from poly(ethylene terephthalate) and silica as surfaces that reduce protein fouling
Alicja Utrata-Wesołek (2018)
Synthesis of Poly(Vinyl Alcohol-Graft-Hyperbranched Glycerol)
P. King (2017)
Review of Techniques to Achieve Optical Surface Cleanliness and Their Potential Application to Surgical Endoscopes
D. Kreeft (2017)
A polar stationary phase obtained by surface-initiated polymerization of hyperbranched polyglycerol onto silica.
Huiliang Geng (2020)
Functionalization of surfaces with branched polymers
Wei Sun (2016)
Polyglycerol coated polypropylene surfaces for protein and bacteria resistance
Maike C. Lukowiak (2015)
A shape memory copolymer based on 2-(dimethylamino)ethyl methacrylate and methyl allyl polyethenoxy ether for potential biological applications
Chen Yang-yang (2015)
Polyglycidol of Linear or Branched Architecture Immobilized on a Solid Support for Biomedical Applications
M. Bochenek (2020)
Phosphorus ionization in silicon doped by self-assembled macromolecular monolayers
Haigang Wu (2017)
Synthesis and Conjugation of Alkyne‐Functional Hyperbranched Polyglycerols
Eli D. Moore (2016)
Novel polyzwitterion shell with adaptable surface chemistry engineered to enhance anti-fouling and intracellular imaging of detonation nanodiamonds under tumor pHe
Biyu Zhou (2020)