Online citations, reference lists, and bibliographies.
← Back to Search

High Throughput Discovery Of New Fouling-resistant Surfaces.

Mingyan Zhou, Hongwei Liu, A. Venkiteshwaran, J. Kilduff, D. Anderson, R. Langer, G. Belfort
Published 2011 · Materials Science, Medicine

Save to my Library
Download PDF
Analyze on Scholarcy
Share
A novel high throughput method for synthesis and screening of customized protein-resistant surfaces was developed. This method is an inexpensive, fast, reproducible and scalable approach to synthesize and screen protein-resistant surfaces appropriate for a specific feed. The method is illustrated here by combining a high throughput platform (HTP) approach together with our patented photo-induced graft polymerization (PGP) method developed for facile modification of commercial poly(aryl sulfone) membranes. We demonstrate that the HTP-PGP approach to synthesize and screen fouling-resistant surfaces is general, and thus provides the capability to develop surfaces optimized for specific feeds. Surfaces were prepared via graft polymerization onto poly(ether sulfone) (PES) membranes and were evaluated using a protein adsorption assay followed by pressure-driven filtration. We have employed the HTP-PGP approach to confirm previously reported successful monomers and to develop new antifouling surfaces from a library of 66 monomers for four different challenges of interest to the biotechnology community: hen egg-white lysozyme, supernatant from Chinese Hamster Ovary (CHO) cells in phosphate buffered saline (PBS) solution as a model cell suspension, and immunoglobulin G (IgG) precipitated in the absence and presence of bovine serum albumin (BSA) in high salt solution as a model precipitation process.
This paper references
10.1007/978-1-4020-6291-9
An Introduction to Chemoinformatics
A. Leach (2003)
10.1016/S0376-7388(98)00347-0
Photochemical modification of 10 kDa polyethersulfone ultrafiltration membranes for reduction of biofouling
John Pieracci (1999)
10.1016/J.SSI.2003.12.018
The application of acrylic monomers with acidic groups to the synthesis of proton-conducting polymer gels
G. Zukowska (2004)
10.1016/J.EURPOLYMJ.2007.11.024
Poly(2-acrylamido glycolic acid-co-acryloyl morpholine) and poly(2-acrylamido glycolic acid-co-acrylamide): Synthesis, characterization, and retention properties for environmentally impacting metal ions
B. Rivas (2008)
10.1016/J.SSI.2006.03.026
Poly(ethyleneglycol methacrylate phosphate) and heterocycle based proton conducting composite materials
M. Kufacı (2006)
10.1016/S0001-8686(97)00040-7
Structure and reactivity of water at biomaterial surfaces.
E. Vogler (1998)
10.1073/PNAS.94.1.59
From oligonucleotide shapes to genomic SELEX: novel biological regulatory loops.
L. Gold (1997)
10.1021/JA054169U
Strong resistance of phosphorylcholine self-assembled monolayers to protein adsorption: insights into nonfouling properties of zwitterionic materials.
S. Chen (2005)
10.1021/LA063660B
High capacity, charge-selective protein uptake by polyelectrolyte brushes.
Andy Kusumo (2007)
10.1365/S10337-009-1394-3
Thermoresponsive Poly(N-vinylcaprolactam) as Stationary Phase for Aqueous and Green Liquid Chromatography
B. Miserez (2010)
10.1021/LA062093P
Protein interactions with self-assembled monolayers presenting multimodal ligands: a surface plasmon resonance study.
Srinavya Vutukuru (2006)
10.1016/J.JCIS.2007.01.019
Synthesis and aqueous solution properties of sterically stabilized pH-responsive polyampholyte microgels.
B. Tan (2007)
10.1021/MA048837S
Antifouling Polymer Membranes with Subnanometer Size Selectivity
Ariya Akthakul (2004)
10.1021/AC071560K
TOF-SIMS analysis of a 576 micropatterned copolymer array to reveal surface moieties that control wettability.
A. J. Urquhart (2008)
10.1016/J.POLYMER.2007.10.043
Controlled grafting from poly(vinylidene fluoride) microfiltration membranes via reverse atom transfer radical polymerization and antifouling properties
Y. Chen (2007)
10.1021/MA035194S
Poly(vinylidene fluoride) with Grafted Poly(ethylene glycol) Side Chains via the RAFT-Mediated Process and Pore Size Control of the Copolymer Membranes
Y. Chen (2003)
10.1021/LA0487996
Thermoresponsive poly(N-isopropylacrylamide) copolymers: contact angles and surface energies of polymer films.
V. Gilcreest (2004)
10.1021/JP972635Z
Molecular Conformation in Oligo(ethylene glycol)-Terminated Self-Assembled Monolayers on Gold and Silver Surfaces Determines Their Ability To Resist Protein Adsorption
P. Harder (1998)
10.1038/352624A0
Making antibody fragments using phage display libraries
T. Clackson (1991)
10.1021/CM0506959
Correlation of the adhesive properties of cells to N-isopropylacrylamide/N-tert-butylacrylamide copolymer surfaces with changes in surface structure using contact angle measurements, molecular simulations, and Raman spectroscopy
I. Lynch (2005)
10.1016/J.MEMSCI.2003.11.013
Low protein fouling synthetic membranes by UV-assisted surface grafting modification: varying monomer type
Masahide Taniguchi (2004)
10.1016/0376-7388(95)00064-J
Evaluation of photochemically modified poly (arylsulfone) ultrafiltration membranes
H. Yamagishi (1995)
10.1002/AIC.12104
High throughput synthesis and screening of new protein resistant surfaces for membrane filtration
M. Zhou (2009)
10.1021/LA0015258
Zwitterionic SAMs that Resist Nonspecific Adsorption of Protein from Aqueous Buffer
R. Holmlin (2001)
10.1002/APP.23163
Novel water-soluble acryloylmorpholine copolymers : Synthesis, characterization, and metal ion binding properties
B. Rivas (2006)
10.1021/LA001222D
Polymeric Thin Films That Resist the Adsorption of Proteins and the Adhesion of Bacteria
R. Chapman (2001)
10.1002/ZFCH.19850250412
Zur Oxydation von Polyethylenoxiden und Polyethylenoxidethern; Die Bildung von Acetaldehyd bei der Oxydation von Diethylenglycol mit Sauerstoff
W. Gerhardt (2010)
10.1002/9783527614141
Combinatorial chemistry : a practical approach
W. Bannwarth (2000)
10.1016/S0376-7388(01)00624-X
Increasing membrane permeability of UV-modified poly(ether sulfone) ultrafiltration membranes
John Pieracci (2002)
10.1021/LA020737X
Kosmotropes Form the Basis of Protein-Resistant Surfaces
R. Kane (2003)
10.1002/MARC.200500830
Synthesis and characterization of novel pH-responsive polyampholyte microgels
B. H. Tan (2006)
10.1021/BK-1997-0680
Poly(ethylene glycol): Chemistry and Biological Applications
J. M. Harris (1997)
10.1016/0376-7388(95)00063-I
Development of a novel photochemical technique for modifying poly (arylsulfone) ultrafiltration membranes
H. Yamagishi (1995)
10.1016/J.JCIS.2007.08.017
The reorientation of poly(2-dimethylamino ethyl methacrylate) after environment stimuli improves hydrophilicity and resistance of protein adsorption.
Y. Su (2007)
10.1016/J.MEMSCI.2005.02.007
Track etched membranes with thermo-adjustable porosity and separation properties by surface immobilization of poly(N-vinylcaprolactam)
Wouter Lequieu (2005)
10.1073/pnas.0605504103
The role of hydrophobic interactions in initiation and propagation of protein folding
H. Dyson (2006)
10.1021/LA0004653
Self-assembled monolayers of alkanethiolates presenting mannitol groups are inert to protein adsorption and cell attachment
Y. Luk (2000)
10.1146/ANNUREV.BB.25.060196.000415
Using self-assembled monolayers to understand the interactions of man-made surfaces with proteins and cells.
M. Mrksich (1996)
10.1021/JP0473321
Protein adsorption on oligo(ethylene glycol)-terminated alkanethiolate self-assembled monolayers: The molecular basis for nonfouling behavior.
L. Li (2005)
10.1016/S0927-7765(99)00004-1
The interaction of proteins and cells with self-assembled monolayers of alkanethiolates on gold and silver
E. Ostuni (1999)
10.1016/S0039-6028(01)01587-4
Biomedical surface science: Foundations to frontiers
D. Castner (2002)
10.1021/JA000774F
Surveying for Surfaces that Resist the Adsorption of Proteins
R. Chapman (2000)
10.1016/S0376-7388(97)00073-2
Surface modification of polysulfone ultrafiltration membranes and fouling by BSA solutions
A. Nabe (1997)
10.1163/156856299X00720
Grafted poly(ethylene oxide) brushes as nonfouling surface coatings.
D. Leckband (1999)
10.1016/S0376-7388(01)00544-0
Photoinduced grafting of ultrafiltration membranes: comparison of poly(ether sulfone) and poly(sulfone)
B. Kaeselev (2001)
10.1016/J.MEMSCI.2006.08.035
Improved antifouling property of zwitterionic ultrafiltration membrane composed of acrylonitrile and sulfobetaine copolymer
Q. Sun (2006)
10.1002/prot.20183
Protein unfolding at interfaces: Slow dynamics of α‐helix to β‐sheet transition
A. Sethuraman (2004)
10.1080/08927010500504784
Inhibition of biofouling by marine microorganisms and their metabolites
S. Dobretsov (2006)
10.1021/LA026358L
Thermoresponsive Surface-Grafted Poly(N−isopropylacrylamide) Copolymers: Effect of Phase Transitions on Protein and Bacterial Attachment
D. Cunliffe (2003)
10.1016/S0376-7388(03)00192-3
Low fouling synthetic membranes by UV-assisted graft polymerization: monomer selection to mitigate fouling by natural organic matter
Masahide Taniguchi (2003)
10.1002/APP.1986.070310210
Membrane potentials and permeation of NaCl in poly(vinyl alcohol‐co‐itaconic acid) membranes
A. Higuchi (1986)
10.1016/J.MEMSCI.2007.08.029
Tunable water flux of a weak polyelectrolyte ultrafiltration membrane
Yanlei Su (2007)
10.1023/B:JMSM.0000021130.11711.16
Rationalising the design of polymeric thermoresponsive biomaterials
Y. Rochev (2004)
10.1016/S0142-9418(00)00026-X
Surface modification of PU membranes by graft copolymerization with acrylamide and itaconic acid monomers
M. Pulat (2001)
10.1016/S0011-9164(02)00485-X
Influence of the surface structure on the filtration performance of UV-modified PES membranes
Bozena Alicja Kæselev (2002)
10.1021/CM010565+
UV-Assisted Graft Polymerization of N-Vinyl-2-pyrrolidinone onto Poly(ether sulfone) Ultrafiltration Membranes Using Selective UV Wavelengths
John Pieracci (2002)
10.1021/LA063737W
Highly efficient non-biofouling coating of zwitterionic polymers: poly((3-(methacryloylamino)propyl)-dimethyl(3-sulfopropyl)ammonium hydroxide).
W. K. Cho (2007)
10.1021/AC070736F
Capillary trap column with strong cation-exchange monolith for automated shotgun proteome analysis.
Fangjun Wang (2007)
10.1163/156856202320253910
PEO-like plasma polymerized tetraglyme surface interactions with leukocytes and proteins: in vitro and in vivo studies
M. Shen (2002)
10.1002/ANIE.200503264
UCST wetting transitions of polyzwitterionic brushes driven by self-association.
O. Azzaroni (2006)
10.1021/LA9706781
Prevention of Protein Adsorption by Tethered Poly(ethylene oxide) Layers: Experiments and Single-Chain Mean-Field Analysis
T. McPherson (1998)
10.1016/J.BIOMATERIALS.2005.08.014
The effect of ethylene glycol methacrylate phosphate in PEG hydrogels on mineralization and viability of encapsulated hMSCs.
C. Nuttelman (2006)
10.1021/LA010384M
A Survey of Structure−Property Relationships of Surfaces that Resist the Adsorption of Protein
E. Ostuni (2001)
10.1002/APP.20710
Permeation and separation characteristics of acetic acid/water mixtures through poly(vinyl alcohol-g-itaconic acid) membranes by pervaporation, evapomeation, and temperature-difference evapomeation
N. Işıklan (2004)
10.1021/ES9003697
High-throughput membrane surface modification to control NOM fouling.
Mingyan Zhou (2009)
10.1002/APP.1986.070320126
Permeation of solutes in water-swollen poly(vinyl alcohol-co-itaconic acid) membranes
A. Higuchi (1986)
10.1529/BIOPHYSJ.104.051797
Protein structural perturbation and aggregation on homogeneous surfaces.
A. Sethuraman (2005)
10.1021/LA049454Q
Effect of surface wettability on the adhesion of proteins.
A. Sethuraman (2004)



This paper is referenced by
10.1021/la503426e
A novel approach for synthesis of zwitterionic polyurethane coating with protein resistance.
C. Wang (2014)
10.1021/la2038747
Time dependence of lysozyme adsorption on end-grafted polymer layers of variable grafting density and length.
J. Genzer (2012)
10.1039/C3RA41483C
Advanced ultrafiltration membranes based on functionalized poly(arylene ether sulfone) block copolymers
M. Kumar (2013)
10.11588/heidok.00016488
Preparation, characterization and application of functional surfaces based on porous polymethacrylates
Junsheng Li (2014)
10.1002/mabi.201200315
High-throughput screening of substrate chemistry for embryonic stem cell attachment, expansion, and maintaining pluripotency.
M. R. Zonca (2013)
Evaluation of Antifouling Materials Based on Silica Gels
Beltran Osuna (2011)
10.1021/acsami.6b11338
Collaborative Action of Surface Chemistry and Topography in the Regulation of Mesenchymal and Epithelial Markers and the Shape of Cancer Cells.
Junsheng Li (2016)
10.1002/marc.201400066
PEG-amine-initiated polymerization of sarcosine N-thiocarboxyanhydrides toward novel double-hydrophilic PEG-b-polysarcosine diblock copolymers.
Xinfeng Tao (2014)
10.1021/bm401542z
Polypeptoid-block-polypeptide copolymers: synthesis, characterization, and application of amphiphilic block Copolypept(o)ides in drug formulations and miniemulsion techniques.
Alexander Birke (2014)
10.1016/J.APSUSC.2015.12.081
Novel antifouling surface with improved hemocompatibility by immobilization of polyzwitterions onto silicon via click chemistry
Sunxiang Zheng (2016)
10.1021/ACS.CHEMMATER.5B01326
New Class of Synthetic Membranes: Organophilic Pervaporation Brushes for Organics Recovery
J. Grimaldi (2015)
10.1080/01496395.2018.1483949
Microscale filtration via a multi-modal microfluidic flow control system
A. S. Kazemi (2018)
10.1080/01496395.2016.1201115
Surface patterning of polymeric membranes and its effect on antifouling characteristics
Y. Ding (2017)
10.1021/acsami.6b09068
Polymer Brushes for Membrane Separations: A Review.
J. J. Keating (2016)
10.1080/19443994.2016.1162445
Preparation and performance of poly (vinyl chloride)/aminated poly (vinyl chloride) blend ultrafiltration membranes
V. Murugan (2016)
10.1002/bit.24837
A multi‐dimensional approach for fractionating proteins using charged membranes
Mirco Sorci (2013)
10.1002/APP.41781
Making polymeric membranes antifouling via “grafting from” polymerization of zwitterions
Q. Li (2015)
10.1016/j.biomaterials.2011.11.001
High throughput atmospheric pressure plasma-induced graft polymerization for identifying protein-resistant surfaces.
M. Gu (2012)
10.1016/J.SEPPUR.2015.06.034
Effect of three different PEO-containing additives on the fouling behavior of PES-based ultrafiltration membranes
G. Kaltalı (2015)
10.1016/j.biomaterials.2013.06.063
The impact of structure on elasticity, switchability, stability and functionality of an all-in-one carboxybetaine elastomer.
B. Cao (2013)
10.1016/J.MEMSCI.2014.06.008
Surface initiated polydopamine grafted poly([2-(methacryoyloxy)ethyl]trimethylammonium chloride) coatings to produce reverse osmosis desalination membranes with anti-biofouling properties
Andrew J Blok (2014)
10.1021/am508943u
A new combinatorial method for synthesizing, screening, and discovering antifouling surface chemistries.
Joseph Imbrogno (2015)
10.1002/mabi.201400417
Directed interactions of block copolypept(o)ides with mannose-binding receptors: PeptoMicelles targeted to cells of the innate immune system.
Philipp Heller (2015)
10.1002/mabi.201500023
Poly(α-Peptoid)s Revisited: Synthesis, Properties, and Use as Biomaterial.
C. Secker (2015)
10.1002/mabi.201500314
Patterned Polypeptoid Brushes.
M. Schneider (2016)
10.1002/AIC.12104
High throughput synthesis and screening of new protein resistant surfaces for membrane filtration
M. Zhou (2009)
10.1002/marc.201400348
One-pot glovebox-free synthesis, characterization, and self-assembly of novel amphiphilic poly(sarcosine-b-caprolactone) diblock copolymers.
Saide Cui (2014)
10.1007/978-3-319-00978-0_15
From Polymers to Nanomedicines: New Materials for Future Vaccines
Philipp Heller (2014)
10.1016/j.memsci.2020.117865
The behavior of suspensions and macromolecular solutions in crossflow microfiltration: An update
J. W. Chew (2020)
10.1016/j.watres.2017.03.044
Integrated membrane and microbial fuel cell technologies for enabling energy-efficient effluent Re-use in power plants.
Namita Shrestha (2017)
10.1016/J.MEMSCI.2012.09.059
Microfiltration membranes prepared from poly(N-vinyl-2-pyrrolidone) grafted poly(vinylidene fluoride) synthesized by simultaneous irradiation
Q. Qin (2013)
10.1002/APP.41683
Nanoporous membranes generated from self‐assembled block polymer precursors: Quo Vadis?
Y. Zhang (2015)
See more
Semantic Scholar Logo Some data provided by SemanticScholar