Online citations, reference lists, and bibliographies.

Modeling Study Of Adhesion In The TiN/Ti, TiN/ZrN, TiN/Ti/ZrN, And TiN/Zr/ZrN Layered Systems

V. Zavodinsky, Yuri G. Kabaldin
Published 2020 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
ABSTRACT Adhesive energy and ultimate adhesive strength of layered TiN/Ti, TiN/ZrN, TiN/Ti/ZrN, and TiN/Zr/ZrN structures are studied by the density functional theory (DFT) and pseudopotentials methods. It has been shown that the TiN/ZrN adhesive depends on the structure of the interface. The maximal energy of adhesion corresponds to the case when titanium atoms of TiN are bound to nitrogen atoms of ZrN, and zirconium atoms of ZrN are bound to nitrogen atoms of TiN. Intercalation of metal layers (Ti or Zr) between TiN and ZrN increase the energy of adhesion; zirconium interlayers influence adhesion more successfully than interlayers of titanium. On example of the TiN/Ti system we studied how energy and force of adhesion depend on structures of the adhesive pairs. We showed that an amorphous coating has smaller values of adhesive energy and ultimate adhesive strength than a crystalline coating, and the roughness of the substrate surface can both improve and to worsen adhesion. Calculated values correlate with known experimental and theoretical data.
This paper references
10.1073/pnas.30.9.244
The Compressibility of Media under Extreme Pressures.
F. D. Murnaghan (1944)
10.1016/J.JNONCRYSOL.2011.07.019
Thermal expansion and recrystallization of amorphous Al and Ti: A molecular dynamics study
John Chu (2011)
10.1038/20148
Electronic mechanism of hardness enhancement in transition-metal carbonitrides
S. Jhi (1999)
10.1115/1.4002158
Computational Evaluation of Adhesion and Mechanical Properties of Nanolayered Erosion-Resistant Coatings for Gas Turbines
M. Bielawski (2011)
10.1007/s10856-017-5848-0
Effects of negatively and positively charged Ti metal surfaces on ceramic coating adhesion and cell response
Rodney Marcelo do Nascimento (2017)
Gas Turbines Power
M Bielawski (2011)
10.1103/PhysRev.140.A1133
Self-Consistent Equations Including Exchange and Correlation Effects
W. Kohn (1965)
10.3390/ma2020699
Optimization of the Adhesion Strength of Arc Ion Plating TiAlN Films by the Taguchi Method
Y. Joo (2009)
10.1016/0257-8972(93)90003-7
The influence of titanium interlayers on the adhesion of PVD TiN coatings on oxidized stainless steel substrates
K. Pischow (1993)
10.1080/00218464.2015.1041590
Surface Roughness on Adhesion of Silver Colloids to a Polyimide Substrate
K. Chou (2016)
10.1163/156856197X00886
Measurement of the adhesion strength of metal oxide and metal nitride thin films sputtered onto glass by the direct pull-off method
Susumu Suzuki (1997)
10.1103/PhysRevB.13.5188
Special points for Brillouin-zone integrations
H. J. Monkhorst (1976)
10.2140/JOMMS.2006.1.1205
Damage in domains and interfaces: a coupled predictive theory
F. Freddi (2006)
10.1016/S0010-4655(98)00201-X
Ab initio pseudopotentials for electronic structure calculations of poly-atomic systems using density-functional theory
M. Fuchs (1999)
10.1080/00218464.2016.1200975
Aluminum foam sandwich with adhesive bonding: Computational modeling
S. H. Sadek (2017)
10.1016/0022-5096(92)90020-3
THE RELATION BETWEEN CRACK GROWTH RESISTANCE AND FRACTURE PROCESS PARAMETERS IN ELASTIC-PLASTIC SOLIDS
V. Tvergaard (1992)
10.1080/00218460500310887
Soft and Hard Adhesion
Jun Young Chung (2005)
10.1021/ACS.JPCC.7B09444
Ab Initio Predictions of Hexagonal Zr(B,C,N) Polymorphs for Coherent Interface Design
Chongze Hu (2017)
10.1002/SIA.6371
First‐principles study of the TiN(111)/ZrN(111) interface
S. Wang (2018)
10.4028/www.scientific.net/JNanoR.40.90
Study of Properties of Nanostructured Multilayer Composite Coatings of Ti-TiN-(TiCrAl)N and Zr-ZrN-(ZrNbCrAl)N
Alexey Anatolevich Vereschaka (2016)
10.1016/j.msec.2012.11.015
Designing biocompatible Ti-based metallic glasses for implant applications.
M. Calin (2013)
10.1063/1.4772756
Adhesion of the TiN/Fe interface with point defects from first principles
Michael Wessel (2013)
10.1016/S0010-4655(97)00117-3
Density-functional theory calculations for poly-atomic systems: electronic structure, static and elastic properties and ab initio molecular dynamics
M. Bockstedte (1997)
10.1016/S0020-7683(00)00053-6
Interface debonding models: a viscous regularization with a limited rate dependency
J. Chaboche (2001)
10.1116/1.577272
The effects of precoating and bias voltage on the adhesion of reactive arc evaporated TiN and ZrN coatings
S. G. Oh (1991)
10.1080/00218464.2014.933809
Effect of Surface Texture on the Adhesion Performance of Laser Treated Ti6Al4V Alloy
P. Maressa (2015)
10.1016/S1003-6326(15)63623-8
Effects of surface roughness of substrate on properties of Ti/TiN/Zr/ZrN multilayer coatings
S. Lin (2015)
10.1103/PhysRevB.33.8800
Accurate and simple density functional for the electronic exchange energy: Generalized gradient approximation.
Perdew (1986)
doi:10.1073/ pnas.30.9.244
Murnagham (1944)
10.3103/S1063457615020045
Structure and properties of (Zr-Ti-Cr-Nb)N multielement superhard coatings
A. Pogrebnjak (2015)
10.1002/NME.1338
Numerical simulation of fatigue-driven delamination using interface elements
P. Robinson (2005)
10.1080/00218464.2013.871538
Surface Patterning of Metal Substrates Through Low Power Laser Ablation for Enhanced Adhesive Bonding
M. Alfano (2014)
10.4028/www.scientific.net/AMM.459.46
The Structure and Adhesion of Zr/TiAlN Coatings on High-Speed Steel and Cemented Carbide Substrates
G. Xian (2013)
10.1016/S0081-1947(08)60071-5
Pseudopotential Theory of Cohesion and Structure
V. Heine (1970)
10.1080/01694243.2014.997379
Evaluation techniques and improvements of adhesion strength for TiN coating in tool applications: a review
M. F. Othman (2015)
10.1016/J.VACUUM.2006.06.006
Influence substrate temperature on structural properties of TiN/TiC bilayers produced by pulsed arc techniques
A. Devia (2006)
10.2298/PAC0702043T
The structure and mechanical properties of multilayer nanocrystalline TiN/ZrN coatings obtained by vacuum-arc deposition
O. A. Tokarev (2007)
10.1016/J.IJADHADH.2013.09.030
Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper
E. Mohseni (2014)
10.1080/00218464.2014.1003210
A Survey of Computational Models for Adhesion
R. Sauer (2016)
10.1016/j.microrel.2004.01.001
Pull-off test in the assessment of adhesion at printed wiring board metallisation/epoxy interface
M. Turunen (2004)
10.1063/1.351651
Elastic constants of single‐crystal transition‐metal nitride films measured by line‐focus acoustic microscopy
J. Kim (1992)
10.1016/0927-796X(95)00187-5
Nanocrystalline metals crystallized from amorphous solids: nanocrystallization, structure, and properties
K. Lu (1996)
10.1088/0953-8984/29/3/035401
First-principles phase diagram calculations for the rocksalt-structure quasibinary systems TiN-ZrN, TiN-HfN and ZrN-HfN.
Z. Liu (2017)
10.1016/J.APSUSC.2013.05.037
Microstructure and corrosion behavior of TiC/Ti(CN)/TiN multilayer CVD coatings on high strength steels
J. Zhang (2013)
10.1016/J.APSUSC.2006.03.017
Study of TiN and ZrN thin films grown by cathodic arc technique
D. Arias (2006)
10.1016/J.SURFCOAT.2005.08.097
Materials informatics for the design of novel coatings
L. Zhao (2005)
10.1116/1.2194031
Hard multilayer coatings containing TiN and/or ZrN: A review and recent progress in their nanoscale characterization
C. Ziebert (2006)
10.1016/0040-6090(87)90167-2
Young's modulus of TiN, TiC, ZrN and HfN☆
E. Török (1987)
10.1080/00218464.2016.1188382
Calibration of adhesion models based on the extended Kalman filtering
G. S. Silva (2017)
10.1016/J.EUROMECHSOL.2010.02.004
A unified model for adhesive interfaces with damage, viscosity, and friction
G. Piero (2010)
10.1016/J.APSUSC.2015.03.156
The friction coefficient evolution of a TiN coated contact during sliding wear
Guojia Ma (2015)
10.1155/APEC.3.21
Adhesion Measurement of Thin Films
K. L. Mittal (1976)



Semantic Scholar Logo Some data provided by SemanticScholar