Current Approaches And Future Perspectives On Strategies For The Development Of Personalized Tissue Engineering Therapies
Lisete S. Neves, Márcia T. Rodrigues, Rui Luís Reis, Manuela E Gomes
Published 2016 · Engineering
Download PDFAnalyze on Scholarcy
ABSTRACT Personalized tissue engineering and regenerative medicine (TERM) therapies propose patient-oriented effective solutions, considering individual needs. Cell-based therapies, for example, may benefit from cell sources that enable easier autologous set-ups or from recent developments on IPS cells technologies towards effective personalized therapeutics. Furthermore, the customization of scaffold materials to perfectly fit a patient’s tissue defect through rapid prototyping technologies, also known as 3D printing, is now a reality. Nevertheless, the timing to expand cells or to obtain functional in vitro tissue substitutes prior to implantation prevents advancements towards routine use upon patient´s needs. Thus, personalized therapies also anticipate the importance of creating off-the-shelf solutions to enable immediately available tissue engineered products. This paper reviews the main recent developments and future challenges to enable personalized TERM approaches and to bring these technologies closer to clinical applications.
This paper references
Vitreous cryopreservation of nanofibrous tissue-engineered constructs generated using mesenchymal stromal cells.
Feng Wen (2009)
The acute and long-term effects of intracoronary Stem cell Transplantation in 191 patients with chronic heARt failure: the STAR-heart study, (vol 12, pg 721
Strauer B-E (2010)
Pooled human platelet lysate versus fetal bovine serum-investigating the proliferation rate, chromosome stability and angiogenic potential of human adipose tissue-derived stem cells intended for clinical use.
Stig-Frederik Trojahn Kølle (2013)
The efficacy of platelet-rich plasma in the treatment of symptomatic knee osteoarthritis: a systematic review with quantitative synthesis.
Amir Khoshbin (2013)
Cryopreservation of alginate-fibrin beads involving bone marrow derived mesenchymal stromal cells by vitrification.
Gajadhar Bhakta (2008)
Studying arrhythmogenic right ventricular dysplasia with patient-specific iPSCs
Changsung Kim (2013)
Adipose-derived regenerative cells in patients with ischemic cardiomyopathy: The PRECISE Trial.
Emerson C. Perin (2014)
Human embryonic stem cell-derived retinal pigment epithelium in patients with age-related macular degeneration and Stargardt's macular dystrophy: follow-up of two open-label phase 1/2 studies
Steven D. Schwartz (2015)
Erratum: Cardiac repair in a porcine model of acute myocardial infarction with human induced pluripotent stem cell-derived cardiovascular cells (Cell Stem Cell (2014) 15 (750-761))
Lei Ye (2015)
A 3D bioprinted complex structure for engineering the muscle-tendon unit.
Tyler K. Merceron (2015)
Synthesis and characterization of biodegradable elastomeric polyurethane scaffolds fabricated by the inkjet technique. Biomaterials
CH Zhang (2008)
Screening druginduced arrhythmia [corrected] using human induced pluripotent stem cell-derived cardiomyocytes and lowimpedance microelectrode arrays. Circulation
EG Navarrete (2013)
Cryopreservation of cell laden natural origin hydrogels for cartilage regeneration strategies
Elena Geta Popa (2013)
Donor cell type can influence the epigenome and differentiation potential of human induced pluripotent stem cells
Kitai Kim (2011)
Dengue Virus Type 3 Adaptive Changes during Epidemics in São Jose de Rio Preto, Brazil, 2006–2007
Christian Julián Villabona-Arenas (2013)
Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems.
Dietmar Werner Hutmacher (2004)
A novel combination of computer-assisted reduction technique and three dimensional printed patient-specific external fixator for treatment of tibial fractures
Feng Qiao (2015)
Determination of cryoprotectant for magnetic cryopreservation of dental pulp tissue.
Sheng-Yang Sean Lee (2012)
Patient‐specific reconstruction with 3D modeling and DMLS additive manufacturing
Mika Salmi (2012)
Clinical analysis of the treatment of spinal cord injury with umbilical cord mesenchymal stem cells.
Jing Liu (2013)
Cryopreservation of alginate encapsulated mesenchymal stromal cells.
Alexey Igorovich Pravdyuk (2013)
Amniotic fluidderived stem cells as a cell source for bone tissue engineering
MT Rodrigues (2012)
Understanding the Role of Growth Factors in Modulating Stem Cell Tenogenesis
Ana I. Gonçalves (2013)
In situ forming degradable networks and their application in tissue engineering and drug delivery.
Kristi S Anseth (2002)
Fabrication of a SFF-based three-dimensional scaffold using a precision deposition system in tissue engineering
Jong Young Kim (2008)
Customized biomimetic scaffolds created by indirect three-dimensional printing for tissue engineering.
Ju-Yeon Lee (2013)
Viable cryopreserving tissue-engineered cell-biomaterial for cell banking therapy in an effective cryoprotectant.
Eri Umemura (2011)
Cryopreservation of rat MSCs by use of a programmed freezer with magnetic field.
Shunichi Kojima (2013)
Other strategies such as injectable hydrogels are also promising for personalized therapies that do not require a mechanical support while regeneration occurs
Towards readytouse 3 - D scaffolds for regenerative medicine : adhesionbased cryopreservation of human mesenchymal stem cells attached and spread within alginategelatin cryogel scaffolds
A Katsen-Globa (2014)
Expansion of adipose tissue mesenchymal stromal progenitors in serum-free medium supplemented with virally inactivated allogeneic human platelet lysate.
Daniel Tzu-bi Shih (2011)
Treatment of graft versus host disease with mesenchymal stromal cells: a phase I study on 40 adult and pediatric patients.
Martino Introna (2014)
Clinical Application of Solid Model Based on Trabecular Tibia Bone CT Images Created by 3D Printer
Jaemo Cho (2015)
Adipose tissue-derived stem cells and their application in bone and cartilage tissue engineering. Tissue Engineering Part B-Reviews
T Rada (2009)
Vitreous cryopreservation of nanofibrous tissueengineered constructs generated using mesenchymal stromal cells , ( vol 15 , part C , pg 105 , 2009 )
S Kojima (2009)
Impact of individual platelet lysates on isolation and growth of human mesenchymal stromal cells.
Patrick Horn (2010)
Phase I trial: the use of autologous cultured adipose-derived stroma/stem cells to treat patients with non-revascularizable critical limb ischemia.
Alessandra Bura (2014)
Cryopreservation of hMSCs seeded silk nanofibers based tissue engineered constructs.
Akalabya Bissoyi (2014)
Drug Screening Using a Library of Human Induced Pluripotent Stem Cell–Derived Cardiomyocytes Reveals Disease-Specific Patterns of Cardiotoxicity
Ping Liang (2013)
Cryopreservation of cell/scaffold tissue-engineered constructs.
Pedro F. Costa (2012)
• Tissue engineering and regenerative medicine (TERM) strategies contribute to the development and exploitation of technologies with translational potential toward personalized medicine therapies
Customized biomimetic scaffolds created by indirect threedimensionalprinting for tissue
J-Y Lee (2013)
Controlled-rate freezing to regulate the structure of collagen-glycosaminoglycan scaffolds in engineered skin substitutes.
Christopher M Lloyd (2015)
This paper proposes a versatile bioink method to allow the application of different hydrogels in 3D printing platforms
Cryopreservation of adherent cells: strategies to improve cell viability and function after thawing.
Rita Malpique (2009)
The efficacy of platelet-rich plasma in the treatment of symptomatic knee osteoarthritis: a systematic review with quantitative synthesis. Arthroscopy
A Khoshbin (2013)
This paper highlights the role of platelet lysates in the development of humanized culture medium to ex vivo expand MSCs for clinical therapies
This paper refers to the application of autologous mesenchymal stem cells (MSCs) from bone marrow in the treatment of ischemic stroke with potential to improve patient recovery
Biopolymer-based hydrogels for cartilage tissue engineering.
Biji Balakrishnan (2011)
Platelet rich plasma in arthroscopic rotator cuff repair: a prospective RCT study, 2-year follow-up.
Pietro Randelli (2011)
The acute and long-term effects of intracoronary Stem cell Transplantation in 191 patients with chronic heARt failure: the STAR-heart study.
Bodo Eckehard Strauer (2010)
Disease modeling and phenotypic drug screening for diabetic cardiomyopathy using human induced pluripotent stem cells.
Faye M. Drawnel (2014)
Vitreous cryopreservation of nanofibrous tissueengineered constructs generated using mesenchymal stromal cells, (vol 15, part C, pg
F. Wen (2009)
Medical Applications for 3D Printing: Current and Projected Uses.
Ventola Cl (2014)
A multimaterial bioink method for 3D printing tunable, cell-compatible hydrogels.
Alexandra L. Rutz (2015)
Screening Drug-Induced Arrhythmia Using Human Induced Pluripotent Stem Cell–Derived Cardiomyocytes and Low-Impedance Microelectrode Arrays
Enrique G. Navarrete (2013)
Erratum: Donor cell type can influence the epigenome and differentiation potential of human induced pluripotent stem cells
Lucas Laursen (2012)
Platelet-rich plasma: intra-articular knee injections produced favorable results on degenerative cartilage lesions
Elizaveta Kon (2009)
Autologous stem cells for personalised medicine.
Weerapong Prasongchean (2012)
Platelet-rich plasma can replace fetal bovine serum in human meniscus cell cultures.
Veronica K. Gonzales (2013)
Cryopreservation of microencapsulated murine mesenchymal stem cells genetically engineered to secrete erythropoietin.
Haritz Gurruchaga (2015)
Photocrosslinked alginate with hyaluronic acid hydrogels as vehicles for mesenchymal stem cell encapsulation and chondrogenesis.
Emily E. Coates (2013)
Printing and Prototyping of Tissues and Scaffolds
Brian Derby (2012)
Custom-Made Computer-Aided-Design/Computer-Aided-Manufacturing Biphasic Calcium-Phosphate Scaffold for Augmentation of an Atrophic Mandibular Anterior Ridge
Francesco Guido Mangano (2015)
Human platelet lysate as a fetal bovine serum substitute improves human adipose-derived stromal cell culture for future cardiac repair applications
B. A. Naaijkens (2012)
Medical Applications for 3D Printing: Current and Projected Uses.
C. Lee Ventola (2014)
Alginate encapsulation as a novel strategy for the cryopreservation of neurospheres.
Rita Malpique (2010)
• One of the first papers on the cryopreservation of TE constructs envisioning the preparation of an off-theshelf engineered tissue substitute
• TERM strategies potentiate the generation of innovative off-the-shelf tissue-engineered products to be available on patient request
Three-dimensional printing of intracardiac defects from three-dimensional echocardiographic images: feasibility and relative accuracy.
Laura J Olivieri (2015)
Mesenchymal stromal cell cryopreservation.
S Renzi (2012)
Platelet Lysate Consisting of a Natural Repair Proteome Supports Human Mesenchymal Stem Cell Proliferation and Chromosomal Stability
Ruben J. Crespo-Diaz (2011)
Induction of Pluripotent Stem Cells from Mouse Embryonic and Adult Fibroblast Cultures by Defined Factors
Kazutoshi Takahashi (2006)
Towards ready-to-use 3-D scaffolds for regenerative medicine: adhesion-based cryopreservation of human mesenchymal stem cells attached and spread within alginate–gelatin cryogel scaffolds
Alisa Katsen-Globa (2013)
• This paper focus on the 3D fabrication of tissue interfaces, exploring increased complexity and structural challenges than single-tissue approaches
Cell sources play an important role, especially the ones explored in an autologous context that eliminate intraspecific variations and incompatibilities, and reduce ethical and regulatory procedures
Biofabrication of osteochondral tissue equivalents by printing topologically defined, cell-laden hydrogel scaffolds.
Natalja E. Fedorovich (2012)
Magnetic Cryopreservation for Dental Pulp Stem Cells
Sheng-Yang Lee (2012)
A long-term follow-up study of intravenous autologous mesenchymal stem cell transplantation in patients with ischemic stroke.
Jin Soo Lee (2010)
Distribution and Viability of Fetal and Adult Human Bone Marrow Stromal Cells in a Biaxial Rotating Vessel Bioreactor after Seeding on Polymeric 3D Additive Manufactured Scaffolds
Anne M Leferink (2015)
Adipose tissue-derived mesenchymal stem cells and platelet-rich plasma: stem cell transplantation methods that enhance stemness
Morikuni Tobita (2015)
Cardiac repair in a porcine model of acute myocardial infarction with human induced pluripotent stem cell-derived cardiovascular cells.
Lei Ye (2014)
Screening druginduced arrhythmia [corrected] using human induced pluripotent stem cell-derived cardiomyocytes and lowimpedance microelectrode arrays
E G Navarrete (2013)
Application of a 3D printed customized implant for canine cruciate ligament treatment by tibial tuberosity advancement.
Miguel Castilho (2014)
Cryopreservation of organotypical cultures based on 3D scaffolds.
Thomas Rupf (2010)
Comparative Study of Survival of Autologous Adipose Tissue Taken and Transplanted by Different Techniques
Anna K. C. Nguyen (1990)
• The customization of therapies and treatments will meet patient needs and improve patient recovery and follow-up with potential to revolutionize medical routine procedures
Human adipose tissue-derived SSEA-4 subpopulation multi-differentiation potential towards the endothelial and osteogenic lineages.
Silvia M. Mihaila (2013)
Cryopreservation based on freezing protocols for the long-term storage of microencapsulated myoblasts.
Ainhoa Murua (2009)
Adipose tissue-derived stem cells and their application in bone and cartilage tissue engineering.
Tommaso Rada (2009)
Amniotic fluid-derived stem cells as a cell source for bone tissue engineering.
Márcia T. Rodrigues (2012)
Characterization of Human Induced Pluripotent Stem Cell-Derived Retinal Pigment Epithelium Cell Sheets Aiming for Clinical Application
Hiroyuki Kamao (2014)
High plasticity of pediatric adipose tissue-derived stem cells: too much for selective skeletogenic differentiation?
Leonardo Guasti (2012)
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Falguni Pati (2014)
Selective laser sintering fabrication of nano-hydroxyapatite/poly-ε-caprolactone scaffolds for bone tissue engineering applications
Yan Xia (2013)
This paper highlights the relevance of adding platelet-rich plasma to meliorate the therapeutic action of stem cells for cell therapies
Synthesis and characterization of biodegradable elastomeric polyurethane scaffolds fabricated by the inkjet technique.
Changhong Zhang (2008)
Therapeutic Potentials of Mesenchymal Stem Cells Derived from Human Umbilical Cord
Cun-Gang Fan (2010)
Mesenchymal stem cell transplantation in amyotrophic lateral sclerosis: A Phase I clinical trial
Letizia Mazzini (2010)
Chondrogenic potential of injectable κ-carrageenan hydrogel with encapsulated adipose stem cells for cartilage tissue-engineering applications.
Elena Geta Popa (2015)
Human umbilical cord mesenchymal stem cells improve liver function and ascites in decompensated liver cirrhosis patients.
Zheng Zhang (2012)
Corrigendum to ‘The acute and long-term effects of intracoronary Stem cell Transplantation in 191 patients with chronic heARt failure: the STAR-heart study’ [Eur J Heart Fail 2010;12:721–729]
Bodo-Eckehard Strauer (2013)
Cryopreservation of fibroblasts immobilized within a porous scaffold: effects of preculture and collagen coating of scaffold on performance of three-dimensional cryopreservation.
Hirotoshi Miyoshi (2010)
The effect of differentiation stage of amniotic fluid stem cells on bone regeneration.
Márcia T. Rodrigues (2012)
A hydrogel bioink toolkit for mimicking native tissue biochemical and mechanical properties in bioprinted tissue constructs.
Aleksander Skardal (2015)
Rate of dehydration, state of subcellular organisation and nature of cryoprotection are critical factors contributing to the variable success of cryopreservation: studies on recalcitrant zygotic embryos of Haemanthus montanus
Autologous mesenchymal stem cells for the treatment of secondary progressive multiple sclerosis: an open-label phase 2a proof-of-concept study
Peter Connick (2012)
A 3 D bioprinted complex structure for engineering themuscle – tendon unit
Comparison and Avoidance of Toxicity of Penetrating Cryoprotectants
Edyta A Szurek (2011)
Treatment With Platelet-Rich Plasma Is More Effective Than Placebo for Knee Osteoarthritis
Sandeep Patel (2013)
Phenotypical and functional characteristics of mesenchymal stem cells from bone marrow: comparison of culture using different media supplemented with human platelet lysate or fetal bovine serum
Nesrine Ben Azouna (2011)
This paper is referenced by
Scaffolds for Bone Tissue Engineering: State of the art and new perspectives.
Livia Roseti (2017)
Personalized Fiber-reinforcement Networks FOR Meniscus Reconstruction.
Jay M Patel (2019)
Injectable Hyaluronic Acid Hydrogels Enriched with Platelet Lysate as a Cryostable Off-the-Shelf System for Cell-Based Therapies
Lisete S. Neves (2017)
Electrospraying Electrospun Nanofiber Segments into Injectable Microspheres for Potential Cell Delivery.
Sunil Kumar Boda (2018)
Current Trends and Challenges in Biofabrication Using Biomaterials and Nanomaterials: Future Perspectives for 3D/4D Bioprinting
Luciano Paulino Silva (2018)
Design and development of personalized dosage forms by printing technology
Mirja Palo (2017)
Soft-Nanoparticle Functionalization of Natural Hydrogels for Tissue Engineering Applications.
Kamil Elkhoury (2019)
Organotypic Culture of Bone-Like Structures Using Composite Ceramic-Fibrin Scaffolds.
Alexandra Iordachescu (2019)
Effect of 'in air' freezing on post-thaw recovery of Callithrix jacchus mesenchymal stromal cells and properties of 3D collagen-hydroxyapatite-scaffolds.
Vitalii Mutsenko (2020)
Advanced hydrogels for treatment of diabetes.
J. Reyes-Martínez (2019)
Calcium phosphates grown on bacterial cellulose template
Cristina Busuioc (2018)
The Feasibility of Encapsulated Embryonic Medullary Reticular Cells to Grow and Differentiate Into Neurons in Functionalized Gelatin-Based Hydrogels
A. Magariños (2018)
Translational Research Symposium—collaborative efforts as driving forces of healthcare innovation
João Q. Coentro (2019)
Patient-Specific Cardiovascular Computational Modeling: Diversity of Personalization and Challenges
Richard A. Gray (2018)
Laser-Etched Designs for Molding Hydrogel-Based Engineered Tissues.
F. Munarin (2017)
Integration of PLGA Microparticles in Collagen-Based Matrices: Tunable Scaffold Properties and Interaction Between Microparticles and Human Epithelial-Like Cells
Luana Cristina Gallo (2020)
Preservation Strategies that Support the Scale-up and Automation of Tissue Biomanufacturing
Shangping Wang (2018)
Micromechanical study of the load transfer in a polycaprolactone–collagen hybrid scaffold when subjected to unconfined and confined compression
Alejandro Garćıa Castro (2018)
Scaffolding Strategies for Tissue Engineering and Regenerative Medicine Applications
Sandra Piña (2019)
Extracellular matrix decorated polycaprolactone scaffolds for improved mesenchymal stem/stromal cell osteogenesis towards a patient-tailored bone tissue engineering approach.
João C. Silva (2020)
Photocurable chitosan as bioink for cellularized therapies towards personalized scaffold architecture
Chiara Tonda-Turo (2020)