Online citations, reference lists, and bibliographies.

Evaluation Of An Original Use Of Spark Plasma Sintering To Laminate Carbon Fibres Reinforced Aluminium

Christophe Perron, Corinne Arvieu, Eric Lacoste
Published 2018 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
An alternative route for producing aluminium matrix reinforced with continuous carbon fibres is proposed in this paper. On the one hand, liquid aluminium does not wet carbon; on the other hand, however, the two form a reactive system leading to carbide formation. A novel way to obtain continuous carbon fibre-reinforced aluminium was investigated, using spark plasma sintering with aluminium foils as raw material. Sintering parameters were adjusted to achieve the effective welding of aluminium foils and penetration of the metal between the filaments. A quality assessment of the fibre/aluminium coupling is presented. Interfaces were then investigated by scanning electron microscopy, transmission electron microscopy and energy-dispersive ray spectroscopy. An effective cohesion of fibres with the matrix was shown. The manageable fibre positioning could result in unidirectional architecture and reinforcement rate should be handled through foil thickness and yarn properties. Using tensile tests, cohesion between aluminium and carbon fibres can be quantified.
This paper references
Behavior of oxide film at the interface between particles in sintered Al powders by pulse electric-current sintering
G. Xie (2003)
Development of textile-reinforced carbon fibre aluminium composites manufactured with gas pressure infiltration methods
W. Hufenbach (2009)
Comportement à la corrosion galvanique de matériaux composites à matrice d'alliage d'aluminium renforcée par des fibres de carbone haut-module
S. Payan (2001)
Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration
A. Daoud (2005)
The influence of the atmosphere on the sintering of aluminum
G. B. Schaffer (2002)
Determining the role of surfaces and interfaces in the powder metallurgy processing of aluminum alloy powders
I. Anderson (2001)
Perfect wettability of carbon by liquid aluminum achieved by a multifunctional flux
Péter Baumli (2010)
Microstructure and mechanical properties of air atomized aluminum powder consolidated via spark plasma sintering
G. Sweet (2014)
Un appa - reillage simple pour la mesure de la diffusivité thermique de plaques minces J
D Hadisaroyo (1992)
Continuous yarn fibre-reinforced aluminium composites prepared by the ultrasonic liquid infiltration method
Yang De-ming (1993)
Wetting improvement of carbon or silicon carbide by aluminium alloys based on a K2ZrF6 surface treatment: application to composite material casting
J. P. Rocher (1989)
Ceramic and metal matrix composites: Routes and properties
M. Rosso (2006)
Temperature distribution for electrically conductive and non-conductive materials during Field Assisted Sintering (FAST)
Jan Raethel (2009)
Evidence of surface cleaning during electric field assisted sintering
Cecile Semana Bonifacio (2013)
Surface oxide and the role of magnesium during the sintering of aluminum
R. Lumley (1999)
Modeling of the consolidation of continuous- fiber metal matrix composites via foil- fiber- foil techniques
Robert L. Goetz (1993)
Evaluation of aluminium-copper alloy reinforced with pitch-based carbon fibres
R. Bushby (1997)
Fibre uniformity and cavitation during the consolidation of metal-matrix composite via fibre-mat and matrix-foil diffusion bonding
Zhengxiao Guo (1993)
Carbon fiber reinforced metal matrix composites: Fabrication processes and properties
K. Shirvanimoghaddam (2017)
The Effect of Particle Shape on the Sintering of Aluminum
Z. Liu (2007)
Electroless nickel coated short carbon fibres in aluminium matrix composites
J. Rams (2007)
Fundamental investigations on the spark plasma sintering/synthesis process: III. Current effect on reactivity
U. Anselmi-Tamburini (2005)
Effect of aluminum carbide on thermal conductivity of the unidirectional CF/Al composites fabricated by low pressure infiltration process
Moonhee Lee (2014)
Tensile stress-strain behaviour of multiaxial metal matrix composites
GC Watt (2015)
Modelling of the temperature distribution during field assisted sintering
K. Vanmeensel (2005)
Matrix consolidation mechanism in 1D-Ti/SiC/C composites produced by continuous binder-powder coating
Ricardo Artur Sanguinetti Ferreira (2013)
Fabrication of high thermal conductive aluminum/graphitic fiber composites by pulsed electric current sintering (特集 電磁プロセスの新展開)
T. Ueno (2007)
Carbide formation in aluminium-carbon fibre-reinforced composites
H. Steffens (1997)
Un appareillage simple pour la mesure de la diffusivité thermique de plaques minces
D. Hadisaroyo (1992)
Frequency effect on pulse electric current sintering process of pure aluminum powder
G. Xie (2003)
Titanium matrix composites processed by continuous binder-powder coating: An alternative fabrication route
R. Ferreira (2006)
Copper coating on carbon fibres and their composites with aluminium matrix
B. Pal
Microstructure of a carbon fiber-reinforced aluminum matrix composite fabricated by spark plasma sintering in various pulse conditions
Grégory Lalet (2014)
Continuous manufacturing of fiber-reinforced metal matrix composite wires — technology and product characteristics
J. Blucher (2001)
Characterization of interfacial mechanical properties in carbon fiber/aluminium matrix composites by the nanoindentation technique
A. Ureña (2005)
Powder route processing of carbon fibres reinforced titanium matrix composites
C. Even (2008)
Conception, élaboration et caractérisation d'un matériau composite à matrice de titane renforcée par des fibres continues de carbone
C. Even (2000)
Vanadium carbide reinforced aluminum matrix composite prepared by conventional, microwave and spark plasma sintering
E. Ghasali (2016)
Temperature and stress fields evolution during spark plasma sintering processes
Serrano Muñoz (2010)
Interface analysis in Al and Al alloys/Ni/carbon composites
J. Silvain (2000)
Temperature control during Spark Plasma Sintering and application to up-scaling and complex shaping
T. Voisin (2013)
Temperature Field Distribution in Spark Plasma Sintering of BN
王玉成 (2002)
Spark plasma sintering of a multilayer thermal barrier coating on Inconel 738 superalloy: Microstructural development and hot corrosion behavior
A. Pakseresht (2016)
The critical role of heating rate in enabling the removal of surface oxide films during spark plasma sintering of Al-based bulk metallic glass powder
Xiaopeng Li (2013)
The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method
Z. A. Munir (2006)
A new casting process for carbon (or SiC-based) fibre-aluminium matrix low-cost composite materials
J. P. Rocher (1985)
Microstructures and mechanical properties of a multi-phase β-solidifying TiAl alloy densified by spark plasma sintering
T. Voisin (2014)
Fundamental investigations on the spark plasma sintering/synthesis process: II. Modeling of current and temperature distributions
U. Anselmi-Tamburini (2005)
Copper coating on carbon fibres and their composites with aluminium matrix
S. Abraham (1992)
Binary alloy phase diagrams
T. B. Massalski (1986)
Effects of Pulse Current on an Aluminum Powder Oxide Layer During Pulse Current Pressure Sintering
Takekazu Nagae (2002)
Fabrication of carbon fibre reinforced, aluminium matrix composite by potassium iodide (KI) – potassium hexafluoro‐titanate (K2TiF6) flux
Koppány L. Juhász (2012)
Microsegregation during Solidification of Graphitic Fiber-Reinforced Aluminum Alloys under External Heat Sinks
H.G. Seong (2007)
Elaboration et caractérisation de fils composites C/Al : infiltration spontanée et continue par activation chimique du mouillage
Caroline Margueritat-Regenet (2002)
Design of metal-matrix composite consolidation practices based on the foil/fiber/foil approach
P. D. Nicolaou (1995)
FEM analysis of the temperature and stress distribution in spark plasma sintering: Modelling and experimental validation
Cao Wang (2010)
Simulation of temperature and stress distributions in functionally graded materials synthesized by a spark plasma sintering process
Sai Wei (2012)
Mechanical properties and microstructure characterization of spark plasma and conventional sintering of Al–SiC–TiC composites
E. Ghasali (2016)

This paper is referenced by
Semantic Scholar Logo Some data provided by SemanticScholar