Online citations, reference lists, and bibliographies.
Please confirm you are human
(Sign Up for free to never see this)
← Back to Search

Quantitative X-ray Tomography

E. Maire, P. Withers
Published 2014 · Materials Science

Save to my Library
Download PDF
Analyze on Scholarcy
Share
Abstract X-ray computer tomography (CT) is fast becoming an accepted tool within the materials science community for the acquisition of 3D images. Here the authors review the current state of the art as CT transforms from a qualitative diagnostic tool to a quantitative one. Our review considers first the image acquisition process, including the use of iterative reconstruction strategies suited to specific segmentation tasks and emerging methods that provide more insight (e.g. fast and high resolution imaging, crystallite (grain) imaging) than conventional attenuation based tomography. Methods and shortcomings of CT are examined for the quantification of 3D volumetric data to extract key topological parameters such as phase fractions, phase contiguity, and damage levels as well as density variations. As a non-destructive technique, CT is an ideal means of following structural development over time via time lapse sequences of 3D images (sometimes called 3D movies or 4D imaging). This includes information needed to optimise manufacturing processes, for example sintering or solidification, or to highlight the proclivity of specific degradation processes under service conditions, such as intergranular corrosion or fatigue crack growth. Besides the repeated application of static 3D image quantification to track such changes, digital volume correlation (DVC) and particle tracking (PT) methods are enabling the mapping of deformation in 3D over time. Finally the use of CT images is considered as the starting point for numerical modelling based on realistic microstructures, for example to predict flow through porous materials, the crystalline deformation of polycrystalline aggregates or the mechanical properties of composite materials.
This paper references
10.1116/1.588271
Cross‐linked polymers for nanofabrication of high‐resolution zone plates in nickel and germanium
G. Schneider (1995)
10.1107/S0021889812039131
Diffraction microcomputed tomography of an Al-matrix SiC-monofilament composite
S. Stock (2012)
10.1016/J.IJTHERMALSCI.2011.01.007
Analytical and numerical prediction of heat transfer and pressure drop in open-cell metal foams
M. Bai (2011)
10.1016/J.BONE.2006.01.147
Time-lapsed investigation of three-dimensional failure and damage accumulation in trabecular bone using synchrotron light.
P. Thurner (2006)
10.1016/J.NDTEINT.2008.04.001
Comparison between X-ray micro-computed tomography and optical scanning tomography for full 3D strain measurement by digital volume correlation
A. Germaneau (2008)
10.1002/ADEM.200700334
Analytical Modelling of the Radiative Properties of Metallic Foams: Contribution of X‐Ray Tomography
M. Loretz (2008)
10.1364/JOSAA.1.000612
Practical cone-beam algorithm
L. A. Feldkamp (1984)
10.1016/J.MATCHAR.2011.04.020
Grain-resolved elastic strains in deformed copper measured by three-dimensional X-ray diffraction
J. Oddershede (2011)
10.1016/J.CONBUILDMAT.2011.10.016
In situ tomographic investigation on the early hydration behaviors of cementing systems
Daniela Gastaldi (2012)
10.1179/174328406X114090
X-ray microtomographic observation of intergranular stress corrosion cracking in sensitised austenitic stainless steel
L. Babout (2006)
10.1063/1.2927476
Hard x-rays nanoscale fluorescence imaging of Earth and Planetary science samples
P. Bleuet (2008)
10.1039/c2an36157d
A laboratory system for element specific hyperspectral X-ray imaging.
S. Jacques (2013)
10.1115/PVP2009-77883
Towards modelling intergranular stress-corrosion cracks using experimentally obtained grain topologies
I. Simonovski (2009)
10.1007/S11837-011-0116-0
High-energy diffraction microscopy at the advanced photon source
U. Lienert (2011)
10.1016/j.jbiomech.2011.10.011
3D real-time micromechanical compressive behaviour of bone-cement interface: experimental and finite element studies.
G. Tozzi (2012)
10.1088/1742-6596/186/1/012001
The history and future of X-ray microscopy
J. Kirz (2009)
10.1016/J.ACTAMAT.2004.02.001
Damage initiation in model metallic materials: X-ray tomography and modelling
L. Babout (2004)
10.1016/J.MSEA.2012.04.060
Sub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloy
D. Tolnai (2012)
10.1016/S0008-6223(00)00196-2
Relations between X-ray tomography, density and mechanical properties in carbon–carbon composites
N. Douarche (2001)
10.1038/35019032
Signatures of granular microstructure in dense shear flows
Daniel M. Mueth (2000)
Spearing: ‘Ultra high resolution computed tomography of damage in notched carbon fiber-epoxy composites
P. Wright (2008)
Neighbour: ‘Failure analysis of the effects of porosity in thermally oxidised nuclear graphite using finite element modelling
C. Berre (2008)
10.1117/12.680975
A hard x-ray KB-FZP microscope for tomography with sub-100-nm resolution
C. Rau (2006)
10.1088/0031-9155/35/1/004
Energy-dispersive X-ray diffraction tomography
G. Harding (1990)
10.1016/J.IJPLAS.2010.09.002
Modeling the viscoplastic micromechanical response of two-phase materials using Fast Fourier Transforms
Sukbin Lee (2011)
10.1098/rspa.2012.0070
Evolution of crack-bridging and crack-tip driving force during the growth of a fatigue crack in a Ti/SiC composite
P. Withers (2012)
10.1016/J.COMMATSCI.2010.06.007
A virtual experimental approach to estimate composite mechanical properties: Modeling with an explicit finite element method
B. Zhang (2010)
10.1080/14680629.2010.9690276
Three-Dimensional Discrete Element Simulation of Asphalt Concrete Subjected to Haversine Loading
Z. You (2010)
10.1016/J.ENGFRACMECH.2011.07.004
Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography
E. Maire (2011)
10.1038/nmat2221
The true toughness of human cortical bone measured with realistically short cracks.
K. J. Koester (2008)
10.1002/JOR.1100080608
Evaluation of a microcomputed tomography system to study trabecular bone structure
J. Kuhn (1990)
b grain boundaries in the FE model: red: corrosion susceptible and green: low angle and blue: coincidence site lattice R3-R29 grain boundaries and c damage development in susceptible grain boundaries
Reducing the Focal Spot Shift of Microfocus X-ray Tubes to Increase the Accuracy of CT-Based Dimensional Measurement
J. Steffen (2011)
10.1016/J.SCRIPTAMAT.2009.06.025
Sub-micrometer synchrotron tomography of multiphase metals using Kirkpatrick–Baez optics
G. Requena (2009)
10.1179/174328406X114126
X-ray tomography observation of crack propagation in nuclear graphite
A. Hodgkins (2006)
10.1002/ADEM.201000221
Analysis of Snow Microstructure by Means of X-Ray Diffraction Contrast Tomography
S. R. D. Roscoat (2011)
10.1016/S1359-6454(00)00314-1
Elastic moduli of model random three-dimensional closed-cell cellular solids
A. Roberts (2000)
Watching the Growth of Bulk Grains During Maire and Withers Quantitative X-ray tomography International Materials Reviews 2014 VOL 59 NO 1 35 Recrystallization of Deformed Metals,
S. Schmidt (2004)
10.1016/S1359-6454(01)00104-5
Characterization by X-ray computed tomography of decohesion, porosity growth and coalescence in model metal matrix composites
L. Babout (2001)
Measurement of parameters of shell targets for laser fusion with the use of X-ray schlieren technique
K. Goetz (1979)
10.1007/S11837-010-0176-6
Characterization of polycrystalline materials using synchrotron X-ray imaging and diffraction techniques
W. Ludwig (2010)
10.1016/J.SCRIPTAMAT.2006.01.043
Image-based modeling of the response of experimental 3D microstructures to mechanical loading
A. Lewis (2006)
Phase-contrast imaging using polychromatic hard Xrays
S. W. Wilkins (1996)
Characterisation by X-ray computed tomography of decohesion, porosity growth & coalescence in model metal matrix composites
L Babout (2001)
10.1007/s11242-012-9941-z
Improving the Estimations of Petrophysical Transport Behavior of Carbonate Rocks Using a Dual Pore Network Approach Combined with Computed Microtomography
D. Bauer (2012)
10.1016/J.CONBUILDMAT.2005.08.013
Representation of real particles for DEM simulation using X-ray tomography
L. Wang (2007)
10.1016/J.ACTAMAT.2009.08.052
Coarsening mechanisms in a dendritic Al–10% Cu alloy
S. Terzi (2010)
10.1107/S0909049512029640
Zone-doubled Fresnel zone plates for high-resolution hard X-ray full-field transmission microscopy
J. Vila-Comamala (2012)
10.1016/J.ACTAMAT.2003.11.014
A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomography
H. Toda (2004)
Accurate image reconstruction from few-views and limited-angle data in divergent-beam CT
E. Sidky (2006)
Diffractionlimited imaging in a scanning electron microscope
C. Jacobsen (1991)
10.1179/174328406X114135
Three-dimensional visualisation of fatigue cracks in metals using high resolution synchrotron X-ray micro-tomography
Jy Buffiere (2006)
10.1016/S1359-6454(96)00311-4
Direct observation of crack opening as a function of applied load in the interior of a notched tensile sample of AlLi 2090
A. Guvenilir (1997)
10.1021/la203432v
Quantification of a single aggregate inner porosity and pore accessibility using hard X-ray phase-contrast nanotomography.
P. Trtík (2011)
10.1016/J.SCRIPTAMAT.2009.07.027
Direct non-destructive observation of bulk nucleation in 30% deformed aluminum
S. S. West (2009)
10.1063/1.1516611
Differential x-ray phase contrast imaging using a shearing interferometer
C. Dávid (2002)
10.1080/10255840903131878
A review of algorithms for medical image segmentation and their applications to the female pelvic cavity
Z. Ma (2010)
10.1063/1.125536
Feasibility of transmission x-ray microscopy at 4 keV with spatial resolutions below 150 nm
B. Kaulich (1999)
10.1107/S0021889812041039
Diffraction/scattering computed tomography for three-dimensional characterization of multi-phase crystalline and amorphous materials
M. Álvarez-Murga (2012)
10.1179/095066099101528261
X-ray microtomography of materials
S. Stock (1999)
10.1364/OE.20.009777
Real space soft x-ray imaging at 10 nm spatial resolution.
W. Chao (2012)
10.1177/0021998308092211
Ultra High Resolution Computed Tomography of Damage in Notched Carbon Fiber—Epoxy Composites
P. Wright (2008)
X-ray tomography in material science
J. Baruchel (2000)
10.1002/SCA.4950010202
How to obtain and use X-Ray projection microscopy in the SEM†
H. Horn (1978)
10.1016/J.ACTAMAT.2008.06.015
Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography
E. Maire (2008)
10.1088/0031-9155/42/11/001
Diffraction enhanced x-ray imaging.
D. Chapman (1997)
10.1016/0026-0800(88)90037-7
Stereological analysis of creep cavities on polished sections
T.-S. Liu (1988)
10.1051/METAL/2011042
Diffraction contrast tomography for the study of polycrystalline stainless steel microstructures and stress corrosion cracking
A. King (2011)
10.1016/J.JQSRT.2007.05.007
Metallic foams: Radiative properties/comparison between different models
M. Loretz (2008)
10.4028/www.scientific.net/AMM.70.93
Assessment of the Deformation of Low Density Polymeric Auxetic Foams by X-Ray Tomography and Digital Volume Correlation
F. Pierron (2011)
10.1016/J.MSEA.2004.12.042
Relationship between internal porosity and fracture strength of die-cast magnesium AM60B alloy
J. P. Weiler (2005)
10.1016/S0142-9612(03)00458-7
Crack blunting, crack bridging and resistance-curve fracture mechanics in dentin: effect of hydration.
J. Kruzic (2003)
10.1038/NPHYS1765
Zernike phase contrast in scanning microscopy with X-rays.
C. Holzner (2010)
Vilsteren: ‘Correlative Tomography
T. L. Burnett (2013)
A fast numerical method for computing the linear and nonlinear mechanical properties of composites
H. Moulinec (1994)
10.1016/S0921-5093(01)01225-4
Experimental study of porosity and its relation to fatigue mechanisms of model Al–Si7–Mg0.3 cast Al alloys
Jean-Yves Buffière (2001)
10.1016/J.ACTAMAT.2007.01.027
In situ investigation by X-ray tomography of the overall and local microstructural changes occurring during partial remelting of an Al–15.8 wt.% Cu alloy
N. Limodin (2007)
10.1016/J.SCRIPTAMAT.2008.04.049
Direct observation of 3-D grain growth in Al-0.1% Mn
S. Schmidt (2008)
10.1038/nmat2168
Probing the structure of heterogeneous diluted materials by diffraction tomography.
P. Bleuet (2008)
10.2320/MATERTRANS.MBW200921
Nondestructive Observation of Pore Structures of A1050 Porous Aluminum Fabricated by Friction Stir Processing
Y. Hangai (2010)
Nanofabrication of high aspect ratio 24 Maire and Withers Quantitative X-ray tomography 34 International Materials Reviews 2014 VOL 59 NO 1 nm X-ray zone plates for X-ray imaging applications
Y. Feng (2007)
10.1016/J.ACTAMAT.2009.01.026
Growth behavior of hydrogen micropores in aluminum alloys during high-temperature exposure
H. Toda (2009)
10.1016/S0963-8695(97)00020-0
Measuring physical density with X-ray computed tomography
D. H. Phillips (1997)
10.1007/S11340-010-9407-6
Voxel-Scale Digital Volume Correlation
H. Leclerc (2011)
10.1038/415887a
Three-dimensional X-ray structural microscopy with submicrometre resolution
B. Larson (2002)
10.4028/www.scientific.net/MSF.567-568.301
X-Ray Micro-Tomography Coupled to the Extended Finite Element Method to Investigate Microstructurally Short Fatigue Cracks
E. Ferrié (2007)
10.1016/S1359-6454(03)00053-3
Measurements of plastic displacement gradient components in three dimensions using marker particles and synchrotron X-ray absorption microtomography
S. Nielsen (2003)
CT for Industrial Metrology – Accuracy and Structural Resolution of CT Dimensional Measurements
S. Carmignato (2012)
10.1016/J.ACTAMAT.2009.01.035
In situ and real-time 3-D microtomography investigation of dendritic solidification in an Al-10 wt.% Cu alloy
N. Limodin (2009)
10.1016/J.SCRIPTAMAT.2005.11.075
Influence of relative density on the architecture and mechanical behaviour of a steel metallic wool
J. Masse (2006)
Bay: ‘Methods and applications of digital volume correlation
B K. (2008)
Prader: ‘Quantification of bone mineralization using computer tomography
P. Ruegsegger (1976)
10.1107/S0909049510010964
A priori information in a regularized sinogram-based method for removing ring artefacts in tomography.
S. Titarenko (2010)
10.1002/PSSA.200675702
Focusing high energy X‐rays with stacked Fresnel zone plates
I. Snigireva (2007)
10.1143/JJAP.13.1385
X-Ray Holographic Microscopy
S. Aoki (1974)
10.1002/ADFM.201101525
Resolving the Three-Dimensional Microstructure of Polymer Electrolyte Fuel Cell Electrodes using Nanometer- Scale X-ray Computed Tomography
W. K. Epting (2012)
10.1016/J.IJFATIGUE.2011.06.010
Microtomographic study and finite element analysis of the porosity harmfulness in a cast aluminium alloy
N. Vanderesse (2011)
10.1002/ADEM.201100092
3D Crack-tip Microscopy: Illuminating Micro-Scale Effects on Crack-Tip Behavior
P. Withers (2011)
10.11646/ZOOTAXA.2742.1.4
A new species of anapid spider (Araneae: Araneoidea, Anapidae) in Eocene Baltic amber, imaged using phase contrast X-ray computed micro-tomography
D. Penney (2011)
10.1016/J.JPOWSOUR.2011.08.083
Quantitative analysis of micro structural and conductivity evolution of Ni-YSZ anodes during thermal
Y. Guan (2011)
10.1002/ADEM.200405152
Structure and Mechanical Properties of AFS Sandwiches Studied by in‐situ Compression Tests in X‐ray Microtomography
L. Salvo (2004)
Marrow: ‘Three-dimensional observation and image-based modelling 3 of thermal strains in polycrystalline alumina
D. Gonzalez (2013)
Principles of computerised tomographic imaging'; 1987
A C Kak
10.1023/A:1014920902712
In-situ deformation of an open-cell flexible polyurethane foam characterised by 3D computed microtomography
J. Elliott (2002)
10.1007/S11661-005-0243-8
In-situ three-dimensional microstructural investigation of solidification of an Al-Cu alloy by ultrafast x-ray microtomography
Olivire Ludwig (2005)
10.1016/B978-008044635-6.50080-7
High-resolution, in-situ, tomographic Observation of Stress Corrosion Cracking
T. J. Marrow (2007)
10.1016/J.CEMCONRES.2011.02.003
Estimation of local stresses and elastic properties of a mortar sample by FFT computation of fields on a 3D image
J. Escoda (2011)
10.1016/J.ACTAMAT.2005.09.030
Deformation of steel powder compacts during sintering: Correlation between macroscopic measurement and in situ microtomography analysis
A. Vagnon (2006)
10.1016/j.actamat.2012.12.027
Time-lapse, three-dimensional in situ imaging of ice crystal growth in a colloidal silica suspension
S. Deville (2013)
10.1016/J.ACTAMAT.2005.04.010
The effect of structural defects on the compressive behavior of closed-cell Al foam
I. Jeon (2005)
10.1007/BF02410982
Digital volume correlation including rotational degrees of freedom during minimization
T. Smith (2002)
10.1177/0309324711409999
Digital volume correlation analyses of synchrotron tomographic images
J. Réthoré (2011)
10.1179/174328406X114199
X-ray microtomography studies of localised corrosion and transitions to stress corrosion cracking
B. Connolly (2006)
10.1524/zkri.2007.222.11.650
X-ray computed tomography in Zernike phase contrast mode at 8 keV with 50-nm resolution using Cu rotating anode X-ray source
A. Tkachuk (2007)
10.1126/science.156.3775.636
How Long Is the Coast of Britain? Statistical Self-Similarity and Fractional Dimension
B. Mandelbrot (1967)
Measuring the elastic strain of individual grains in a polycrystalline material -extending a micro-scale technique to the nano-regime
J Oddershede
10.1007/s10856-008-3597-9
Quantifying the 3D macrostructure of tissue scaffolds
J. Jones (2009)
10.1038/NPHYS265
Phase retrieval and differential phase-contrast imaging with low-brilliance X-ray sources
F. Pfeiffer (2006)
10.1063/1.364374
Observation of microstructure and damage in materials by phase sensitive radiography and tomography
P. Cloetens (1997)
10.1016/J.BIOMATERIALS.2006.11.014
Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds.
J. Jones (2007)
10.1017/S1431927612001079
Three-dimensional synchrotron virtual paleohistology: a new insight into the world of fossil bone microstructures.
S. Sanchez (2012)
10.1016/J.CONBUILDMAT.2011.08.061
Three-dimensional microstructural modeling of asphalt concrete using a unified viscoelastic–viscoplastic–viscodamage model
Tae-Sun You (2012)
10.1016/J.CONBUILDMAT.2011.12.071
Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures
Erdem Coleri (2012)
10.1088/0022-3727/29/1/023
Phase objects in synchrotron radiation hard x-ray imaging
P. Cloetens (1996)
10.1016/J.CES.2011.07.034
The influence of nanoscale microstructural variations on the pellet scale flow properties of hierarchical porous catalytic structures using multiscale 3D imaging
F. Tariq (2011)
Developments in X-Ray Tomography V
U. Bonse (1999)
Three-dimensional analysis of high-resolution X-ray computed tomography data with morphoz
L Brabant (2011)
High-resolution, in situ, tomographic observations of stress corrosion cracking’, in ‘Environment-induced cracking of metals, volume 2: Prediction, industrial developments and evaluation
T. J. Marrow (2008)
Robinson: ‘A hard X-ray KB-FZP microscope for tomography with sub-100-nm resolution - art
C. Rau (2006)
10.1109/NSSMIC.1997.670480
Development of ultra-fast X-ray computed tomography scanner system
K. Hori (1997)
10.1002/9781118557723.CH38
On Pore Space Partitioning in Relation to Network Model Building for Fluid Flow Computation in Porous Media
E. Plougonven (2013)
10.1016/S1369-7021(07)70305-X
X-ray nanotomography
P. Withers (2007)
10.1179/1743280411Y.0000000011
Freeze casting of porous materials: review of critical factors in microstructure evolution
W. Li (2012)
10.1016/S0168-583X(02)01689-0
X-ray micro-tomography an attractive characterisation technique in materials science
L. Salvo (2003)
10.1149/2.053207JES
Multi Length Scale Microstructural Investigations of a Commercially Available Li-Ion Battery Electrode
P. Shearing (2012)
10.1016/J.MSEA.2010.05.033
The role of Ni and Fe aluminides on the elevated temperature strength of an AlSi12 alloy
Z. Asghar (2010)
Geltmacher: ‘Using image-based computational modeling to study microstructureyield correlations in metals
M.A.S. Qidwai (2009)
Resolving the threedimensional microstructure of polymer electrolyte fuel cell electrodes using nanometer-scale X-ray computed tomography
W. K. Epting (2012)
Simultaneous 4D-CT reconstruction using higher order spatial regularization and edge enhancement based on global information in temporal domain
D. Kazantsev (2013)
10.1190/1.1512785
Computation of linear elastic properties from microtomographic images: Methodology and agreement between theory and experiment
C. Arns (2002)
10.1016/J.ACTAMAT.2012.03.048
Quantifying the effect of porosity on the evolution of deformation and damage in Sn-based solder joints by X-ray microtomography and microstructure-based finite element modeling
E. Padilla (2012)
10.1016/J.IJFATIGUE.2011.09.011
Damage tolerant design of cast components based on defects detected by 3D X-ray computed tomography
M. Shirani (2012)
10.1148/121.1.93
Quantification of bone mineralization using computed tomography.
P. Rüegsegger (1976)
Chirazi: ‘Investigation of the clustering behaviour of titanium diboride particles in aluminium’, Compos
I. G. Watson (2005)
10.1063/1.1142711
Coherent hard x‐ray focusing optics and applications
W. Yun (1992)
10.1111/J.1475-1305.2006.00258.X
Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties – a Review
F. Hild (2005)
10.1002/ADEM.200600051
X‐ray Microtomographic Characterisation of Porosity and its Influence on Fatigue Crack Growth
P. Li (2006)
10.1016/J.NIMB.2005.12.058
Phase transformations in steel studied by 3DXRD microscopy
S. E. Offerman (2006)
10.1016/J.ACTAMAT.2010.11.015
3-D observations of short fatigue crack interaction with la2mellar and duplex microstructures in a two-phase titanium alloy
S. Birosca (2011)
10.1016/J.JPOWSOUR.2010.09.059
Analysis of the three-dimensional microstructure of a solid-oxide fuel cell anode using nano X-ray tomography
Y. Guan (2011)
10.1016/J.MICROMESO.2012.11.029
Characterization of multi-scale microstructural features in Opalinus Clay
L. M. Keller (2013)
10.1016/J.JNUCMAT.2008.07.006
Microstructural modelling of nuclear graphite using multi-phase models
C. Berre (2008)
10.1017/S1431927610000231
Nanoscale X-ray microscopic imaging of mammalian mineralized tissue.
J. C. Andrews (2010)
10.4028/www.scientific.net/MSF.558-559.389
Mapping Partially Recrystallised Structures by 3DXRD
S.S. West (2007)
10.1016/J.ACTAMAT.2004.09.027
First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomography
Dominique Bernard (2005)
10.1111/J.1365-2818.1982.TB00376.X
X‐ray microtomography
J. C. Elliott (1982)
10.1107/S0021889810012963
Determining grain resolved stresses in polycrystalline materials using three-dimensional X-ray diffraction
J. Oddershede (2010)
10.1016/J.COMPOSITESA.2011.12.020
X-Ray Damage Characterisation in Self-Healing Fibre Reinforced Polymers
G. McCombe (2012)
10.1364/OE.20.002789
Theoretical comparison of three X-ray phase-contrast imaging techniques: propagation-based imaging, analyzer-based imaging and grating interferometry.
P. C. Diemoz (2012)
10.1016/j.bone.2009.07.078
Beam hardening artifacts in micro-computed tomography scanning can be reduced by X-ray beam filtration and the resulting images can be used to accurately measure BMD.
J. A. Meganck (2009)
10.1016/J.ACTAMAT.2011.11.055
Polycrystal model of the mechanical behavior of a Mo-TiC30 vol.% metal-ceramic composite using a thr
D. Cédat (2012)
10.1179/174328406X114171
X-ray microtomographic characterisation of pore evolution during homogenisation and rolling of Al–6Mg
Y. Youssef (2006)
10.1016/S0168-9002(97)00566-4
X-ray microtomography scanner using time-delay integration for elimination of ring artefacts in the reconstructed image
G. Davis (1997)
10.1016/J.CEMCONRES.2008.05.003
Digital laminography assessment of the damage in concrete exposed to freezing temperatures
K. Wakimoto (2008)
10.1002/PSSB.201083975
In situ 3D X‐ray microtomography study comparing auxetic and non‐auxetic polymeric foams under tension
S. McDonald (2011)
10.1016/S1359-6462(02)00531-6
Microstructural analysis of alumina chromium composites by X-ray tomography and 3-D finite element simulation of thermal stresses
G. Geandier (2003)
10.1103/PHYSREVB.80.024113
Evolution of stress in individual grains and twins in a magnesium alloy aggregate.
C. Aydıner (2008)
10.1002/POLB.22055
X‐ray computed tomography‐based modeling of polymeric foams: The effect of finite element model size on the large strain response
Jgf Joris Wismans (2010)
10.1007/S11661-006-1072-0
Quantitative assessment of microstructure and its effects on compression behavior of aluminum foams via high-resolution synchrotron X-ray tomography
H. Toda (2006)
Besuelle: ‘Discrete and continuum analysis of localised deformation in sand using X-ray mu CT and volumetric digital image correlation
S. A. Hall (2010)
Development of a hard X-ray microscope
B. Lai (1995)
10.1016/J.CMA.2009.09.013
Three dimensional experimental and numerical multiscale analysis of a fatigue crack
J. Rannou (2010)
10.1007/S11837-011-0219-7
Fast In Situ X-Ray Microtomography Observations of Solidification and Semisolid Deformation of Al-Cu Alloys
M. Suéry (2012)
10.1016/j.jmbbm.2007.06.002
Micro-computed tomography of fatigue microdamage in cortical bone using a barium sulfate contrast agent.
H. Leng (2008)
10.1001/ARCHOTOL.1963.00750020354017
LAMINOGRAPHY OF THE TEMPORAL BONE.
M. Portmann (1963)
10.1016/J.MATCHAR.2007.07.006
Experimental determination of strain partitioning among individual grains in the bulk of an aluminium multicrystal
K. Haldrup (2008)
10.1088/0031-9155/21/3/004
Beam hardening in x-ray reconstructive tomography.
R. Brooks (1976)
10.1111/j.1365-2818.1995.tb03570.x
X‐ray microtomographic studies of metal matrix composites using laboratory X‐ray sources
P. Mummery (1995)
10.3139/146.110660
Imaging of grain-level orientation and strain in thicker metallic polycrystals by high energy transmission micro-beam Laue (HETL) diffraction techniques
F. Hofmann (2012)
10.1002/JBMR.5650040103
The direct examination of three‐dimensional bone architecture in vitro by computed tomography
Lee A. Feldkamp (1989)
Evaluation and qualification standards for an X-ray laminography system
T. Siewert (1992)
10.1154/1.3427328
Tests of microstructure reconstruction by forward modeling of high energy X-ray diffraction microscopy data
C. Hefferan (2010)
10.1016/J.CRME.2008.06.006
Extended three-dimensional digital image correlation (X3D-DIC)
J. Réthoré (2008)
10.1017/S1551929513000060
The Ascent of 3D X-ray Microscopy in the Laboratory
A. Merkle (2013)
10.1016/J.ACTAMAT.2007.09.001
On the origin of deformation-induced rotation patterns below nanoindents
N. Zaafarani (2008)
10.1017/S1431927608080264
Phase contrast X-ray synchrotron imaging: opening access to fossil inclusions in opaque amber.
M. Lak (2008)
10.1016/J.ACTAMAT.2011.07.034
Three-dimensional in situ observations of short fatigue crack growth in magnesium
A. King (2011)
10.1080/15376494.2010.528166
Microstructure-Based Models for Multi-Functional Material Systems
M. Sarzynski (2012)
10.1007/BF02323555
Digital volume correlation: Three-dimensional strain mapping using X-ray tomography
B. K. Bay (1999)
10.1137/0143035
AN INVERSION FORMULA FOR CONE-BEAM RECONSTRUCTION*
H. Tuy (1983)
10.1016/J.IJHEATMASSTRANSFER.2006.02.034
Determination of the anisotropic radiative properties of a porous material by radiative distribution function identification (RDFI)
B. Zeghondy (2006)
10.1149/1.3615824
Using Synchrotron X-Ray Nano-CT to Characterize SOFC Electrode Microstructures in Three-Dimensions at Operating Temperature
P. Shearing (2011)
Epsztein: ‘A mesoscale quantification method of cavitation in semicrystalline polymers using X-ray microtomography
E. Rosenberg (2011)
10.1007/S10853-011-5754-7
Random geometric graphs for modelling the pore space of fibre-based materials
R. Thiedmann (2011)
10.3139/146.110386
Fast in-situ X-ray micro tomography characterisation of microstructural evolution and strain-induced damage in alloys at various temperatures
M. Suéry (2010)
Discussion on the nucleation rate of ferrite during continuous cooling in a lowcarbon steel measured by 3DXRD’, in ‘Solid-Solid Phase Transformations in Inorganic Materials ‘05
Z.-G. Yang (2005)
Grainresolved elastic strains in deformed copper measured by threedimensional X-ray diffraction
J. Oddershede (2011)
Marrow: ‘Diffraction contrast tomography for the study of polycrystalline stainless steel microstructures and stress corrosion cracking
A. King (2011)
3-D Materials Characterization over a Range of Time and Length Scales
M. Anderson (2015)
10.1016/S0749-6419(00)00061-9
Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: F.E. model
F. Barbe (2001)
10.1002/ADFM.201001004
Combined Use of Synchrotron‐Radiation‐Based Imaging Techniques for the Characterization of Structured Catalysts
F. Basile (2010)
FATIGUE CRACKS IN ALUMINUM SAMPLES STUDIED WITH X-RAY PHASE CONTRAST IMAGING AND WITH ABSORPTION MICROTOMOGRAPHY
S. Stock (2002)
10.1016/J.SCRIPTAMAT.2012.03.003
Non-destructive 3-D reconstruction of the martensitic phase in a dual-phase steel using synchrotron holotomography
Caroline Landron (2012)
10.1016/J.SCRIPTAMAT.2011.08.005
Three-dimensional grain structure of sintered bulk strontium titanate from X-ray diffraction contrast tomography
M. Syha (2012)
10.1016/J.MSEA.2009.06.047
In situ single-grain peak profile measurements on Ti–7Al during tensile deformation
U. Lienert (2009)
10.1016/S1359-6454(03)00048-X
3D-characterisation of microstructure evolution during annealing of a deformed aluminum single crystal
H. Poulsen (2003)
10.1126/science.266.5188.1213
Ultrahigh-Resolution X-ray Tomography
W. Haddad (1994)
10.1016/J.JSG.2008.03.002
High-resolution tomography of cracks, voids and micro-structure in greywacke and limestone
S. Zabler (2008)
10.1007/978-3-642-05171-5_8
Mesoscopic Mechanical Analyses of Textile Composites: Validation with X-Ray Tomography
P. Badel (2010)
10.1016/J.ACTAMAT.2011.08.046
Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels
Caroline Landron (2011)
Permeability calculations on real Al-Cu microstructures assessed by 3D microtomography’, Chapter is from - ‘Modeling of Casting, Welding, and Advanced Solidification Processes X
D. Bernard (2003)
10.1016/J.JEURCERAMSOC.2006.05.097
Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography
É. Maire (2007)
Waltinger: ‘How to obtain and use Xray projection microscopy in the SEM
H.G.H.R.F. Horn (1978)
10.1520/STP42144S
Experimental Measurement of Strains using Digital Volume Correlation
T. Smith (2001)
10.1017/S1431927610094389
Three-dimensional analysis of high-resolution X-ray computed tomography data with Morpho+.
L. Brabant (2011)
Attainment of < 60 nm Resolution in Phase-Contrast X-ray Microscopy using an add-on to an SEM
S. Mayo (2006)
10.1107/S0021889808001684
X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. I. Direct beam case
G. Johnson (2008)
10.1111/j.1365-2818.2010.03408.x
Region‐of‐interest tomography using filtered backprojection: assessing the practical limits
A. Kyrieleis (2011)
10.1080/1478643031000115754
Assessment of the fatigue crack closure phenomenon in damage-tolerant aluminium alloy by in-situ high-resolution synchrotron X-ray microtomography
H. Toda (2003)
10.1117/12.964588
High-resolution and high-speed CT in industry and research
S. Zabler (2012)
10.1016/J.SCRIPTAMAT.2007.11.005
Three-dimensional microtomographic study of Widmanstätten microstructures in an alpha/beta titanium alloy
N. Vanderesse (2008)
10.1016/S1359-6454(03)00278-7
Recrystallization kinetics of individual bulk grains in 90% cold-rolled aluminium
E. Lauridsen (2003)
10.1016/j.actbio.2009.10.012
In vivo corrosion and corrosion protection of magnesium alloy LAE442.
F. Witte (2010)
10.1016/J.ACTAMAT.2006.01.003
The Principle of Strain Reconstruction Tomography: Determination of Quench Strain Distribution from Diffraction Measurements
A. Korsunsky (2005)
10.1118/1.2836423
Prior image constrained compressed sensing (PICCS): a method to accurately reconstruct dynamic CT images from highly undersampled projection data sets.
G. Chen (2008)
10.1016/S1359-6462(99)00355-3
Characterisation by X-ray micro-tomography of cavity coalescence during superplastic deformation
C. Martín (2000)
10.1364/OE.20.010310
Hard-X-ray imaging optics based on four aspherical mirrors with 50 nm resolution.
S. Matsuyama (2012)
10.1016/J.ACTAMAT.2006.02.012
Estimation of the effective properties of particle-reinforced metal–matrix composites from microtomographic reconstructions
A. Borbély (2006)
Fougeres: ‘Damage initiation in model metallic materials: X-ray tomorgraphy and modelling
L. Babout (2004)
Bay: ‘Experimental measurement of strains using digital volume correlation’, in ‘Nontraditional methods of sensing stress, strain and damage in materials and structures: second volume
B.K.T.S. Smith (2001)
Merchi: ‘A new methodology based on X-ray micro-tomography to estimate stress concentrations around inclusions in high strength steels
A. Stienon (2009)
Watching the Growth of Bulk Grains During Maire and Withers Quantitative X-ray tomography International Materials Reviews Recrystallization of Deformed Metals
S Schmidt (2004)
Dimichiel: ‘Damage quantification in aluminium alloys using in situ tensile tests in Xray tomography
E. Maire (2011)
Altstadt: ‘Numerical Simulation of Mechanical Properties of Cellular Materials Using Computed Tomography Analysis
F. Fischer (2009)
10.1016/J.JNUCMAT.2008.07.021
Failure analysis of the effects of porosity in thermally oxidised nuclear graphite using finite element modelling
C. Berre (2006)
10.1016/J.SCRIPTAMAT.2003.10.034
Direct observation of subgrain evolution during recovery of cold-rolled aluminium
C. Gundlach (2004)
10.1016/J.COLSURFA.2010.12.017
Experimental and FEM analysis of the material response of porous metals imposed to mechanical loading
N. Michailidis (2011)
10.1016/J.ACTAMAT.2010.01.024
Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation
N. Limodin (2010)
10.1063/1.2719653
Nanoscale zoom tomography with hard x rays using Kirkpatrick-Baez optics
R. Mokso (2007)
10.1016/0167-5087(83)91152-3
The Göttingen X-ray microscopes
B. Niemann (1983)
10.1063/1.2400017
Forward modeling method for microstructure reconstruction using x-ray diffraction microscopy: Single-crystal verification
R. Suter (2006)
10.1016/J.SCRIPTAMAT.2003.08.007
Non-destructive mapping of grains in three dimensions
Xiaowei Fu (2003)
10.1016/J.SCRIPTAMAT.2004.08.014
Analysis of pore interconnectivity in bioactive glass foams using X-ray microtomography
R. Atwood (2004)
10.1016/J.JEMBE.2010.10.006
Quantification of porosity in Acropora pulchra (Brook 1891) using X-ray micro-computed tomography techniques
R. Roche (2010)
10.1016/J.MSEA.2011.02.031
Finite element analysis of the mechanical properties of cellular aluminium based on micro-computed tomography
C. Veyhl (2011)
10.1016/J.FUEL.2010.08.026
Analysis of coke under compressive loading: A combined approach using micro-computed tomography, finite element analysis, and empirical models of porous structures
N. Tsafnat (2011)
Quantitative X-ray projection microscopy: phase-contrast and multi-spectral imaging.
S. Mayo (2002)
10.1016/J.MSEA.2012.03.064
Macro and intergranular stress responses of austenitic stainless steel to 90 ◦ strain path changes
D. González (2012)
10.1063/1.3625299
Following dynamic processes by X-ray tomographic microscopy with sub-second temporal resolution
R. Mokso (2011)
Development of fast and high throughput tomography using CMOS image detector at SPring-8’, Developments in X-Ray Tomography
K. Uesugi (2012)
Etourneau: ‘First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomoaraphy
D. Bernard (2005)
10.1107/s0021889808001726
X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. II. The combined case
G. Johnson (2008)
10.1016/0030-4018(91)90016-7
Diffraction-limited imaging in a scanning transmission x-ray microscope
C. Jacobsen (1991)
10.1080/14786430412331331916
3D quantitative image analysis of open-cell nickel foams under tension and compression loading using X-ray microtomography
T. Dillard (2005)
10.1007/S10853-005-5021-X
Mechanical properties of bread crumbs from tomography based Finite Element simulations
P. Babin (2005)
10.1016/J.FLOWMEASINST.2013.04.007
Investigation of upward cocurrent gas–liquid pipe flow using ultrafast X-ray tomography and wire-mesh sensor
Z. Zhang (2013)
10.4028/www.scientific.net/MSF.561-565.2301
Growth of Individual Austenite Grains Measured with 3DXRD Microscopy
V. I. Savran (2007)
10.2174/157341310790945623
Threshold fine-tuning and 3D characterisation of porous media using X-ray nanotomography
H. Ostadi (2010)
10.1063/1.3529435
Experimental facility for two- and three-dimensional ultrafast electron beam x-ray computed tomography.
T. Stürzel (2011)
10.1016/J.JNUCMAT.2008.07.015
Application of a micromechanics model to the overall properties of heterogeneous graphite
C. Berre (2008)
10.1557/JMR.2007.0181
X-ray computed micro tomography as complementary method for the characterization of activated porous ceramic preforms
Srdan Vasic (2007)
10.1016/S0009-2509(03)00010-1
Measurement of the local velocity of the solid phase and the local solid hold-up in a three-phase flow by X-ray based particle tracking velocimetry (XPTV)
A. Seeger (2003)
10.1016/S1359-6454(99)00024-5
Characterization of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography
Jean-Yves Buffière (1999)
Einfluss der Quellbewegung auf Reproduzierbarkeit und Antastabweichung im RöntgenComputertomographen
D. Weiss (2010)
Using synchrotron X-ray nanoCT to characterize SOFC electrode microstructures in threedimensions at operating temperature’, Electrochem
P. R. Shearing (2011)
Ice: ‘Experimental Characterization and Crystal Plasticity Modeling of Heterogeneous Deformation in Polycrystalline alpha-Ti
L. Wang (2011)
Soft X-ray microscopy at a spatial resolution better than 15nm
W. Chao (2005)
10.1109/MCSE.2009.40
Total Tomography [review of Advances in Discrete Tomography and Its Applications (Herman, G.T. and Kuba, A., Eds.; 2007)]
M. J. Schillaci (2009)
10.1107/S0021889801014273
Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders
H. Poulsen (2001)
10.1007/s00138-009-0242-7
Proposal of a method to analyze 3D deformation/fracture characteristics inside materials based on a stratified matching approach
M. Nakazawa (2009)
10.1109/ICIP.1994.413687
Multiresolution tomographic reconstruction using wavelets
A. H. Delaney (1994)
10.1016/J.SCRIPTAMAT.2007.07.044
The shock response of aluminium foams
Neil Bourne (2008)
10.1117/12.861355
Quantitative x-ray microtomography with a conventional source
G. Davis (2010)
10.1016/J.JNUCMAT.2008.09.020
Comparative study of predictive FE methods for mechanical properties of nuclear composites
J. Ali (2009)
10.1179/174328406X114144
MicroCT (microtomography) quantification of microstructure related to macroscopic behaviour: Part 1 – Fatigue crack closure measured in situ in AA 2090 compact tension samples
K. Ignatiev (2006)
Cailletaud: ‘Intergranular and intragranular behavior of polycrystalline aggregates
F. Barbe (2001)
10.1016/J.COMPOSITESA.2005.02.003
Investigation of the clustering behaviour of titanium diboride particles in aluminium
I. G. Watson (2005)
10.1116/1.2789447
Nanofabrication of high aspect ratio 24nm x-ray zone plates for x-ray imaging applications
Y. Feng (2007)
10.1088/0957-0233/25/6/065401
A new method of performance verification for x-ray computed tomography measurements.
Fabien Leonard (2014)
10.1615/INTJMULTCOMPENG.V9.I3.30
LARGE-SCALE COMPUTATIONS OF EFFECTIVE ELASTIC PROPERTIES OF RUBBER WITH CARBON BLACK FILLERS
A. Jean (2011)
10.1016/J.MATCHEMPHYS.2010.03.064
Ultra-small angle neutron scattering and X-ray tomography studies of caseinate–hydroxyapatite microporous materials
C. Ritzoulis (2010)
10.1016/J.CORSCI.2010.11.005
The study of intergranular corrosion in aircraft aluminium alloys using X-ray tomography
S. Knight (2011)
Three-dimensional plastic strain mapping technique for X-ray micro-tomography
Masakazu Kobayashi (2010)
10.1016/J.JNUCMAT.2011.03.051
Computational multiscale modeling of intergranular cracking
I. Simonovski (2011)
10.1016/J.ACTAMAT.2008.02.027
Visualization by X-ray tomography of void growth and coalescence leading to fracture in model materials
A. Weck (2008)
10.1038/373595A0
Phase-contrast imaging of weakly absorbing materials using hard X-rays
T. Davis (1995)
10.1073/pnas.1107966108
Age-related changes in the plasticity and toughness of human cortical bone at multiple length scales
E. Zimmermann (2011)
Amaziago: ‘Toughening by aligned, frictionally constrained fibres
J.C.B. Budiansky (1989)
X-ray micro-tomography at the Advanced Light Source’, Developments in X-Ray tomography
A. A. MacDowell (2012)
X-ray micro-tomography at the Advanced Light Source', Developments in X-Ray tomography VIII
A A Macdowell (2012)
Quantitative X-ray tomography 40 International Materials Reviews 2014 VOL 59 NO 1 Ritchie: ‘Age-related changes in the plasticity and toughness of human cortical bone at multiple length scales
E. A. Zimmermann (2011)
10.4028/www.scientific.net/MSF.519-521.1361
Observation of Precipitates in Aluminium Alloys by Sub-Micrometer Resolution Tomography Using Fresnel Zone Plate
H. Toda (2006)
10.4028/www.scientific.net/MSF.558-559.751
Three Dimensional Characterization of Grain Structures by EBSP and 3DXRD
Kristófer Hannesson (2007)
10.1016/J.JMPS.2005.07.007
Simulation of the densification of real open-celled foam microstructures
A. Brydon (2005)
10.4028/www.scientific.net/MSF.735.61
4D Damage Characterization during Superplastic Deformation of Magnesium Alloys
P. Lhuissier (2012)
10.1016/J.SSI.2011.10.015
Exploring microstructural changes associated with oxidation in Ni-YSZ SOFC electrodes using high resolution X-ray computed tomography
P. Shearing (2012)
10.3139/146.110277
In-situ observation of creep damage evolution in Al–Al2O3 MMCs by synchrotron X-ray microtomography
Michael V. Huppmann (2010)
10.1002/AENM.201300506
Lithiation-induced dilation mapping in a lithium-ion battery electrode by 3D X-ray microscopy and digital volume correlation
D. Eastwood (2014)
10.3390/ma5050937
In-Line Phase-Contrast X-ray Imaging and Tomography for Materials Science
S. Mayo (2012)
10.1016/J.FLOWMEASINST.2005.02.003
Comparison between wire-mesh sensor and ultra-fast X-ray tomograph for an air–water flow in a vertical pipe
H.-M. Prasser (2005)
10.1016/J.ACTAMAT.2009.07.051
An X-ray microtomographic and finite element modeling approach for the prediction of semi-solid deformation behaviour in Al–Cu alloys
D. Fuloria (2009)
10.1016/J.COMPSCITECH.2012.12.006
A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage
D. Bull (2013)
10.1016/J.ACTAMAT.2009.05.010
Three-dimensional study of Ni aluminides in an AlSi12 alloy by means of light optical and synchrotron microtomography
Z. Asghar (2009)
10.1111/J.1475-1305.2007.00348.X
Volumetric Digital Image Correlation Applied to X-ray Microtomography Images from Triaxial Compression Tests on Argillaceous Rock
N. Lenoir (2007)
10.1088/0022-3727/40/21/R02
Sintering and microstructure of ice: a review
J. R. Blackford (2007)
10.1016/0010-4361(93)90165-5
Damage in aligned-fibre SiC/Al quantified using a laboratory X-ray tomographic microscope
T. Breunig (1993)
10.1179/174328406X114153
MicroCT (microtomography) quantification of microstructure related to macroscopic behaviour: Part 2 – Damage in SiC–Al monofilament composites tested in monotonic tension and fatigue
T. Breunig (2006)
10.1118/1.598855
Efficient correction for CT image artifacts caused by objects extending outside the scan field of view.
B. Ohnesorge (2000)
10.1016/J.ACTAMAT.2007.08.043
Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests
E. Maire (2007)
Buffiere and R. Fougeres: ‘Characterisation by X-ray computed tomography of decohesion, porosity growth & coalescence in model metal matrix composites
L. Babout (2001)
Accuracy and repeatability of X-ray computed tomography measurements
F. Leonard (2013)
10.1016/J.ACTAMAT.2010.09.063
3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography
M. Herbig (2011)
10.1016/J.SCRIPTAMAT.2005.11.028
Mapping the evolution of density in 3D of thermally oxidised graphite for nuclear applications
L. Babout (2006)
10.1016/J.MSEA.2009.02.008
A new methodology based on X-ray micro-tomography to estimate stress concentrations around inclusions in high strength steels
A. Stienon (2009)
10.1016/S0266-3538(03)00276-8
X-ray tomography applied to the characterization of cellular materials. Related finite element modeling problems
E. Maire (2003)
10.1016/J.ACTAMAT.2009.03.038
Three-dimensional analysis of a compression test on stone wool
F. Hild (2009)
10.1126/science.1156211
Observations of Intergranular Stress Corrosion Cracking in a Grain-Mapped Polycrystal
A. King (2008)
10.1007/S11340-010-9445-0
Towards High Performance Digital Volume Correlation
Mark Gates (2011)
Baillis: ‘Analytical modelling of the radiative properties of metallic foams: Contribution of X-ray tomography
M. Loretz (2008)
ImageJ
W S Rasband (1997)
10.1107/S0909049510001512
Synchrotron radiation computed laminography for polymer composite failure studies
Feng Xu (2010)
10.1046/J.1460-2695.1998.00062.X
HIGH RESOLUTION COMPUTED TOMOGRAPHY AND IMPLICATIONS FOR FATIGUE CRACK CLOSURE MODELLING
Guvenilir (2008)
10.1557/JMR.2006.0242
Fracture, aging, and disease in bone
J. Ager (2006)
10.1016/j.jsb.2008.08.004
3D micro-scale deformations of wood in bending: synchrotron radiation muCT data analyzed with digital volume correlation.
F. Forsberg (2008)
10.1016/J.NIMB.2011.08.069
Resolution effect on the study of ductile damage using synchrotron X-ray tomography
C. Landron (2012)
10.1016/J.MSEC.2005.08.021
Role of microstructure in the aging-related deterioration of the toughness of human cortical bone
R. K. Nalla (2006)
10.1016/J.ACTAMAT.2003.10.032
Bulk observation of metal powder sintering by X-ray synchrotron microtomography
O. Lame (2004)
10.1016/J.ACTAMAT.2010.10.003
Void growth in copper during high-temperature power-law creep
K. Dzieciol (2011)
10.1016/J.SCRIPTAMAT.2010.07.021
Characterization and modeling of void nucleation by interface decohesion in dual phase steels
Caroline Landron (2010)
10.1016/J.ACTAMAT.2010.10.056
Permeability, pore connectivity and critical pore throat control of expandable polymeric sphere templated macroporous alumina
Linnéa Andersson (2011)
10.1063/1.1884194
Fast microtomography using high energy synchrotron radiation
M. Michiel (2005)
10.3970/CMC.2009.014.209
Statistics of High Purity Nickel Microstructure From High Energy X-ray Diffraction Microscopy
C. Hefferan (2009)
Pianetta: ‘Nanoscale Xray microscopic imaging of mammalian mineralized tissue
J. C. Andrews (2010)
10.1146/ANNUREV-MATSCI-070511-155109
Three-Dimensional Architecture of Engineering Multiphase Metals
G. Requena (2012)
Principles of computerised tomographic imaging’
A. C. Kak (1987)
10.1016/S0022-3913(10)60184-9
Mechanical behavior of ceramic veneer in zirconia-based restorations: a 3- dimensional finite element analysis using microcomputed tomography data.
E. Rocha (2011)
Table of CT Imaging Times’, 2013; Available from: https://docs.google.com/spreadsheet/ccc?key5 0Ar8bW1AwveI_dHdTa2VjYndRVl9ybnRPckRrZUQ1alE
P. J. Withers (2013)
10.1016/J.MECHMAT.2010.01.003
Finite element simulation of the plastic collapse of closed-cell aluminum foams with X-ray computed tomography
I. Jeon (2010)
10.1007/S11340-010-9333-7
In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics
J. Buffière (2010)
Development of fast and high throughput tomography using CMOS image detector at SPring-8', Developments in X-Ray Tomography VIII
K Uesugi (2012)
Buffiere: ‘Nanoscale zoom tomography with hard x rays using KirkpatrickBaez optics
R. Mokso (2007)
Insitu three-dimensional microstructural investigation of solidification of an Al-Cu alloy by ultrafast X-ray microtomography
O Ludwig (2005)
10.1016/J.ACTAMAT.2009.05.021
Using image-based computational modeling to study microstructure–yield correlations in metals
M. A. Qidwai (2009)
10.1038/nature03719
Soft X-ray microscopy at a spatial resolution better than 15 nm
W. Chao (2005)
Imaging in Four Dimensions
P. J. Withers (2012)
10.1002/CRAT.19800150812
Double crystal diffractometry for the characterization of targets for laser fusion experiments
E. Förster (1980)
10.1016/J.CARBON.2012.02.030
Fiber bundle push-out test and image-based finite element simulation for 3D carbon/carbon composites
R. Sharma (2012)
10.1179/174328405X71684
3D grainmap generation with the algebraic reconstruction technique from 3DXRD data
E. Knudsen (2005)
10.1046/J.1460-2695.2002.00503.X
Fatigue crack nuclei in austempered ductile cast iron
T. J. Marrow (2002)
10.1016/J.PARTIC.2010.01.001
Combining X-ray microtomography with computer simulation for analysis of granular and porous materials
R. Moreno-Atanasio (2010)
10.1063/1.3625353
Improved Scanning Geometry to Collect 3D‐Geometry Data in Flat Samples
P. Krueger (2011)
10.1159/000080580
Synchrotron X-Ray Microtomographic Investigation of Mineral Concentrations at Micrometre Scale in Sound and Carious Enamel
S. E. Dowker (2004)
10.1007/S11661-006-0027-9
Simulation of the mechanical properties of an aluminum matrix composite using X-ray microtomography
I. G. Watson (2006)
10.1007/S11661-010-0260-0
Three-Dimensional Microstructure Visualization of Porosity and Fe-Rich Inclusions in SiC Particle-Reinforced Al Alloy Matrix Composites by X-Ray Synchrotron Tomography
Flávio Andrade Silva (2010)
Experimental Characterization and Crystal Plasticity Modeling of Heterogeneous Deformation in Polycrystalline alpha-Ti'
L Wang (2011)
Marrow: ‘Flexural strength and defect behaviour in a quasibrittle material (polygranular graphite) under different states of stress
M. Mostafavi (2013)
Pyzalla: ‘In situ 3D quantification of the evolution of creep cavity size, shape and spatial orientation using synchrotron X-ray tomography
A. Isaac (2008)
10.1016/J.ACTAMAT.2006.11.050
Estimation of microstructural properties from synchrotron X-ray microtomography and determination of the REV in paper materials
S. R. D. Roscoat (2007)
10.1016/J.SCRIPTAMAT.2011.03.030
A method for the 3-D quantification of bridging ligaments during crack propagation
L. Babout (2011)
10.1080/14786430902956457
X-ray micro-computed tomography of beech wood and biomorphic C, SiC and Al/SiC composites
T.E. Wilkes (2009)
10.1016/J.SCRIPTAMAT.2011.09.005
Ductile crack initiation and propagation assessed via in situ synchrotron radiation-computed laminography
T. Morgeneyer (2011)
10.1016/J.NIMA.2009.06.030
Image stitching strategies for tomographic imaging of large objects at high resolution at synchrotron sources
A. Kyrieleis (2009)
10.1016/S1365-1609(00)00057-5
Experimental characterisation of the localisation phenomenon inside a Vosges sandstone in a triaxial cell
P. Bésuelle (2000)
10.1016/J.JCS.2005.12.002
Fast X-ray tomography analysis of bubble growth and foam setting during breadmaking
P. Babin (2006)
10.1016/S1359-6454(02)00320-8
Study of the interaction of a short fatigue crack with grain boundaries in a cast Al alloy using X-ray microtomography
W. Ludwig (2003)
10.1016/J.JSB.2007.10.001
High energy X-ray scattering tomography applied to bone.
S. Stock (2008)
10.1016/J.SCRIPTAMAT.2009.04.041
In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminium alloys
S. Terzi (2009)
10.1117/12.769478
A blob-based tomographic reconstruction of 3D coronary trees from rotational x-ray angiography
J. Zhou (2008)
10.1016/J.MSEA.2011.04.091
A mesoscale quantification method of cavitation in semicrystalline polymers using X-ray microtomography
E. Rosenberg (2011)
10.1109/TIP.2011.2131661
DART: A Practical Reconstruction Algorithm for Discrete Tomography
K. J. Batenburg (2011)
10.1117/12.860536
An examination of phase retrieval algorithms as applied to phase contrast tomography using laboratory sources
R. S. Bradley (2010)
10.1063/1.1329638
High-resolution lenses for sub-100 nm x-ray fluorescence microscopy
C. David (2000)
10.1016/J.COMMATSCI.2007.01.015
Computations of permeability tensor coefficients and anisotropy of asphalt concrete based on microstructure simulation of fluid flow
E. Masad (2007)
ImageJ,’1997—2012; Available from: imagej.nih.gov
W. S. Rasband (2012)
The development of a laboratory X-ray microtomography system for the study of soft-solids and cellular materials
P. Rockett (2008)
10.1680/GEOT.2010.60.5.315
Discrete and continuum analysis of localised deformation in sand using X-ray mu CT and volumetric digital image correlation
S. Hall (2010)
Pathways to sub-10 nm X-ray imaging using zone plate lens', Design and Microfabrication of Novel X-Ray Optics II
W B Yun (2004)
Direct observations of crack opening as a function of applied load in the interior of a notched tensile sample of Al-Li 2090
A. Guvenilir (1997)
10.1007/S11440-011-0151-6
Grain-scale experimental investigation of localised deformation in sand: a discrete particle tracking approach
E. Andò (2012)
10.1002/9781118147726.CH14
MODELLING AND MEASUREMENT OF PLASTIC DEFORMATION AND GRAIN ROTATION IN 3D AT THE GRAIN-TO-GRAIN LEVEL
D. González (2011)
10.1088/0031-9155/54/9/010
Soft-tissue phase-contrast tomography with an x-ray tube source.
M. Bech (2009)
10.1109/TNS.1979.4329688
Limited Field of View Reconstruction in Computerized Tomography
O. Nalcioglu (1979)
10.1016/J.CARBON.2004.11.002
The effect of thermal oxidation on polycrystalline graphite studied by X-ray tomography
L. Babout (2005)
10.1016/S1359-6462(00)00430-9
Kinetics of individual grains during recrystallization
E. Lauridsen (2000)
10.1016/J.ACTAMAT.2009.05.005
Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images
N. Limodin (2009)
10.1088/0953-8984/16/33/012
In situ high resolution synchrotron x-ray tomography of fatigue crack closure micromechanisms
K. H. Khor (2004)
10.1016/J.ACTAMAT.2008.04.045
Three-dimensional characterization and thermal property modelling of thermally oxidized nuclear graphite
L. Babout (2008)
10.1109/83.624961
Wavelet-based multiresolution local tomography
F. Rashid-Farrokhi (1997)
10.1016/0022-5096(87)90006-8
Toughening by aligned, frictionally constrained fibers
B. Budiansky (1989)
Three - dimensional analysis of high - resolution X - ray computed tomography data with morpho z
S. Youssef Bauer (2011)
10.1007/BF03221124
Computed tomography part III: Volumetric, High-Resolution X-Ray analysis of fatigue crack closure
S. Stock (1995)
10.1016/J.FLOWMEASINST.2005.02.002
Experimental ultra fast X-ray computed tomography with a linearly scanned electron beam source
U. Hampel (2005)
Reducing the Focal Spot Shift of Microfocus X-ray Tubes to Increase the Accuracy of CT-Based Dimensional Measurement
T. Fröba (2010)
10.1016/J.ACTAMAT.2010.03.013
The evolution of crack-tip stresses during a fatigue overload event
A. Steuwer (2010)
10.2214/AJR.09.2397
Iterative reconstruction technique for reducing body radiation dose at CT: feasibility study.
A. Hara (2009)
10.1016/J.ACTAMAT.2011.07.051
Extraction of fibre network architecture by X-ray tomography and prediction of elastic properties using an affine analytical model
D. Tsarouchas (2011)
10.1179/174328406X114108
Crack opening displacements during fatigue crack growth in Ti–SiC fibre metal matrix composites by X-ray tomography
P. Withers (2006)
10.1016/J.IJENGSCI.2008.08.012
Stress concentrations in non-convex elastic particles embedded in a ductile matrix
N. Moulin (2009)
Table of CT Imaging Times
P J Withers (2013)
Recent progress in local reconstruction’, Developments in X-ray tomography
H. Yu (2010)
High-resolution, in situ, tomographic observations of stress corrosion cracking', in 'Environment-induced cracking of metals
T J Marrow (2008)
10.1002/anie.201104604
Dynamic X-ray diffraction computed tomography reveals real-time insight into catalyst active phase evolution.
S. Jacques (2011)
10.1117/12.929575
Development of fast and high throughput tomography using CMOS image detector at SPring-8
K. Uesugi (2012)
10.1007/S11661-010-0249-8
Experimental Characterization and Crystal Plasticity Modeling of Heterogeneous Deformation in Polycrystalline α-Ti
L. Wang (2011)
10.1038/384335A0
Phase-contrast imaging using polychromatic hard X-rays
S. Wilkins (1996)
10.1029/2000JB900208
Pore and throat size distributions measured from synchrotron X-ray tomographic images of Fontaineble
W. Lindquist (1999)
10.1117/12.859772
Recent progress in local reconstruction
H. Yu (2010)
10.1016/0013-7944(70)90028-7
Fatigue crack closure under cyclic tension
E. Wolf (1970)
10.1098/rsbl.2011.0923
A minute fossil phoretic mite recovered by phase-contrast X-ray computed tomography
J. Dunlop (2011)
Chrzas: ‘Coherent hard Xray focusing optics and applications
W. B. Yun (1992)
10.1016/J.SCRIPTAMAT.2005.04.053
Nucleation of recrystallization observed in situ in the bulk of a deformed metal
A. Larsen (2005)
10.1016/S0022-5096(99)00016-2
Elastic properties of a tungsten–silver composite by reconstruction and computation
A. Roberts (1999)
Walnut: ‘Wavelet-based multiresolution local tomography
F. Rashid Farrokhi (1997)
10.1557/MRS2008.126
In Situ X-Ray Tomography Studies of Microstructural Evolution Combined with 3D Modeling
Jy Buffiere (2008)
10.1016/J.CONBUILDMAT.2010.06.066
Two- and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography images
Q. Dai (2011)
10.1016/J.SCRIPTAMAT.2005.09.042
Particle movement during the deep penetration of a granular material studied by X-ray microtomography
S. McDonald (2006)
10.1063/1.2211300
Energy-tunable transmission x-ray microscope for differential contrast imaging with near 60 nm resolution tomography
Gung-Chian Yin (2006)
10.1364/AO.15.001883
X-ray microscopy with synchrotron radiation.
B. Niemann (1976)
Buffiere and W. Ludwig: ‘3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography
M. Herbig (2011)
10.3139/146.110672
In-situ X-ray microtomography study of the movement of a granular material within a die
S. McDonald (2012)
10.1016/J.ACTAMAT.2010.11.065
In situ observation of ductile fracture using X-ray tomography technique
H. Toda (2011)
10.1098/rsif.2013.0304
Metamorphosis revealed: time-lapse three-dimensional imaging inside a living chrysalis
T. Lowe (2013)
10.1557/JMR.2009.0023
Morphological analysis of pores in directionally freeze-cast titanium foams
J. L. Fife (2009)
10.1016/J.ACTAMAT.2013.06.005
Three-dimensional observation and image-based modelling of thermal strains in polycrystalline alumina
D. Gonzålez (2013)
10.1016/J.MSEA.2004.09.004
Permeability assessment by 3D interdendritic flow simulations on microtomography mappings of Al–Cu alloys
D. Bernard (2005)
10.1126/SCIENCE.1106778
Simultaneous Tomography and Diffraction Analysis of Creep Damage
A. Pyzalla (2005)
10.1117/12.560201
Phase contrast stereometry: fatigue crack mapping in 3D
K. Ignatiev (2004)
10.1016/J.ACTAMAT.2011.07.006
Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys
Z. Asghar (2011)
10.1016/J.ACTAMAT.2010.12.012
Characterization of hierarchical pore structures in ceramics using multiscale tomography
F. Tariq (2011)
Measuring the elastic strain of individual grains in a polycrystalline material - extending a micro-scale technique to the nano-regime’, in ‘Nanostructured Metals: Fundamentals to Applications
J. Oddershede (2009)
Towards accurate image reconstruction from truncated X-ray CT projections
G. Van Gompel (2009)
Biasetto: ‘Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography
E. Maire (2007)
Threedimensional visualisation of fatigue cracks in metals using high resolution synchrotron X-ray micro-tomography
J. Y. Buffiere (2006)
Pore and throat size distributions measured from synchrotron Xray tomographic images of Fontainebleau sandstones
W. B. Lindquist (2000)
10.1016/j.actbio.2010.06.027
Hierarchically structured titanium foams for tissue scaffold applications.
R. Singh (2010)
10.1243/03093247JSA436
Methods and applications of digital volume correlation
B. Bay (2008)
10.1016/j.physletb.2003.10.071
Three dimensional image correlation from X-Ray computed tomography of solid foam
S. Roux (2007)
10.1016/S0749-6419(03)00101-3
Micron-resolution 3-D measurement of local orientations near a grain-boundary in plane-strained aluminum using X-ray microbeams
B. C. Larson (2004)
10.1002/ar.20986
Biomechanics of Dromaeosaurid Dinosaur Claws: Application of X‐Ray Microtomography, Nanoindentation, and Finite Element Analysis
P. Manning (2009)
10.1063/1.1145666
Development of a hard x‐ray imaging microscope
B. Lai (1995)
10.1117/12.568199
Pathways to sub-10nm x-ray imaging using zone plate lens
W. Yun (2004)
10.1016/J.SCRIPTAMAT.2006.01.016
High resolution X-ray tomography of micromechanisms of fatigue crack closure
K. H. Khor (2006)
10.1007/978-0-8176-4543-4
Advances in discrete tomography and its applications
G. Herman (2007)
10.1007/S11837-011-0042-1
3-D x-ray strain microscopy in two-phase composites at submicron length scales
R. Barabash (2011)
10.1002/ADEM.200900289
Applying SEM-Based X-ray Microtomography to Observe Self-Healing in Solvent Encapsulated Thermoplastic Materials†
S. Mookhoek (2010)
10.1063/1.2744224
Practical error estimation in zoom-in and truncated tomography reconstructions.
X. Xiao (2007)
10.1016/0001-6160(75)90047-4
Intergranular fracture at elevated temperature
R. Raj (1975)
10.1016/S0045-7825(97)00218-1
A numerical method for computing the overall response of nonlinear composites with complex microstructure
H. Moulinec (2020)
10.1016/S0022-5096(01)00056-4
Elastic properties of model random three-dimensional open-cell solids
A. P. Roberts (2002)
10.1016/J.ENGFRACMECH.2012.11.023
Observation and quantification of three-dimensional crack propagation in poly-granular graphite
M. Mostafavi (2012)
10.1016/S0168-583X(02)01737-8
Microimaging and tomography with chemical speciation
C. Rau (2003)
Doumalin: ‘Structure and mechanical properties of AFS sandwiches studied by in situ compression tests in X-ray microtomography
L. Salvo (2004)
Pantleon: ‘High-energy diffraction microscopy at the advanced photon source
U. Lienert (2011)
Marrow: ‘Observation and quantification of three-dimensional crack propagation in poly-granular graphite’, Engineering Fracture Mechanics, Available online
M. Mostafavi (2013)
Phase contrast stereometry : Fatigue crack mapping in 3 D ’ , Developments in X - ray tomography IV
K. I. Ignatiev (1997)
10.1179/026708311X13135950699290
Benefits of metal foams and developments in modelling techniques to assess their materials behaviour: a review
C. Betts (2012)
10.4028/www.scientific.net/MSF.652.63
Measuring Type II Stresses Using 3DXRD
J. Oddershede (2010)
10.1016/J.ACTAMAT.2005.02.045
Real-time observation of grain nucleation and growth during solidification of aluminium alloys
N. Iqbal (2005)
10.1016/J.ACTAMAT.2012.04.020
Observation of recovery and recrystallization in high-purity aluminum measured with forward modeling analysis of high-energy diffraction microscopy
C. Hefferan (2012)
10.1177/0309324711405761
Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis
J. V. Bernier (2011)
Mesure tridimensionnelle de champs cinématiques par imagerie volumique pour l'analyse des matériaux et des structures
M. Bornert (2004)
10.1364/OPEX.13.006296
X-ray phase imaging with a grating interferometer.
T. Weitkamp (2005)
10.1002/SIA.5221
Revealing the three dimensional internal structure of aluminium alloys
G. E. Thompson (2013)
10.1002/ADEM.200400212
Virtual Materials Design: Properties of Cellular Solids Derived from 3D Tomographic Images†
M. Knackstedt (2005)
10.1016/J.ENGFRACMECH.2009.08.001
Evaluation of three-dimensional and two-dimensional full displacement fields of a single edge notch fracture mechanics specimen, in light of experimental data using X-ray tomography
Yoann Barranger (2009)
10.1007/S11837-011-0117-Z
Characterization of creep and creep damage by in-situ microtomography
A. Borbély (2011)
10.1016/J.COMPSCITECH.2005.05.014
X-ray computed microtomography of internal damage in fiber reinforced polymer matrix composites
P. J. Schilling (2005)
Fatigue cracks in Aluminum samples studied with Xray phase contrast imaging and with absorption microstomography’, in ‘Advances in X-ray Analysis
S. R. Stock (2002)
Flexural strength and defect behaviour in a quasibrittle material (polygranular graphite) under different states of stress
M Mostafavi (2013)
King: ‘Towards modelling intergranular stress-corrosion cracks using experimentally obtained grain topologies’, in ‘Asme Pressure
I. Simonovski (2009)
Maire and Withers Quantitative X-ray tomography International Materials Reviews
Soft 20-nm resolution X-ray microscopy demonstrated by use of multilayer test structures
W. L. Chao (2003)
10.1088/1742-6596/186/1/012072
High energy X-ray nanofocusing by silicon planar lenses
A. Snigirev (2009)
10.1016/J.MSEA.2007.05.108
In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography
A. Isaac (2008)
10.1016/J.SCRIPTAMAT.2008.10.013
In situ three-dimensional X-ray microtomography of an auxetic foam under tension
S. A. Mcdonald (2009)
10.1016/J.COMPSCITECH.2008.07.011
Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics
E. Totry (2008)
10.1016/J.COMMATSCI.2006.01.033
Finite element simulations of the deformation of fused-cast refractories based on X-Ray computed tomography
K. Madi (2007)
Harkegard: ‘Damage tolerant design of cast components based on defects detected by 3D X-ray computed tomography
G. M. Shirani (2012)
Developments in X-Ray Tomography VII
S. Stock (2010)
Energy-dispersive Xray-diffraction tomography
G Harding (1990)
Computed tomography.3. Volumetric, high-resolution X-ray-analysis of fatigue-crack closure
S R Stock (1995)
Cernik: ‘A laboratory system for element specific hyperspectral X-ray imaging
S.D.M. Jacques (2013)
Simultaneous 4D-CT reconstruction using higher order spatial regularization and global Gibbs-type temporal prior
D. Kazantsev (2013)
Observation of precipitates in aluminum alloys by sub-micrometer resolution tomography using Fresnel zone plate', Aluminium alloys 2006, Pts 1 and 2: research through innovation and technology
H Toda (2006)
High-resolution X-ray tomography using laboratory sources’, Developments in X-ray Tomography V, Proc.SPIE
A. Tkachuk (2006)
The ascent Of 3D microscopy in the laboratory
A. P. Merkle (2013)
10.1016/J.CARBON.2013.03.025
Flexural strength and defect behaviour of polygranular graphite under different states of stress
M. Mostafavi (2013)
10.1117/12.682383
High-resolution x-ray tomography using laboratory sources
A. Tkachuk (2006)
10.1007/S11837-011-0217-9
Quantitative 3D Characterization of Solidification Structure and Defect Evolution in Al Alloys
C. Puncreobutr (2012)
10.1016/J.ACTAMAT.2004.02.045
Lattice rotations of individual bulk grains Part II: correlation with initial orientation and model comparison
G. Winther (2004)
10.1002/ADEM.200900241
Constituent Particle Break-Up During Hot Rolling of AA 5182**
N. Moulin (2010)
10.1063/1.3100200
Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis.
W. Ludwig (2009)
10.1177/0021955X09339340
Numerical Simulation of Mechanical Properties of Cellular Materials Using Computed Tomography Analysis
F. Fischer (2009)
10.1016/J.JHYDROL.2013.01.045
A novel architecture for pore network modelling with applications to permeability of porous media
A. Jivkov (2013)
10.1115/1.2840965
Probing Microstructure Dynamics With X-Ray Diffraction Microscopy
R. Suter (2008)
Pathways to sub-10 nm X-ray imaging using zone plate lens’, Design and Microfabrication of Novel X-Ray
W. B. Yun (2004)
10.1126/SCIENCE.1098627
Watching the Growth of Bulk Grains During Recrystallization of Deformed Metals
S. Schmidt (2004)
10.1109/23.708308
Development of ultra-fast X-ray computed tomography scanner system
K. Hori (1997)
10.1016/J.SCRIPTAMAT.2009.05.004
Local crack driving force analysis of a fatigue crack by a microstructural tracking method
P. Qu (2009)
10.1038/22498
Extending the methodology of X-ray crystallography to allow imaging of micrometre-sized non-crystalline specimens
J. Miao (1999)
10.1016/J.SCRIPTAMAT.2006.03.066
Quantitative 3D characterization of intermetallic phases in an Al-Mg industrial alloy by X-ray microtomography
É. Maire (2006)
10.1016/J.ACTAMAT.2008.07.023
Modeling the properties of closed-cell cellular materials from tomography images using finite shell elements
O. Caty (2008)
10.1039/b927490a
Combining tomographic imaging and DEM simulations to investigate the structure of experimental sphere packings
G. Delaney (2010)
3 D Characterisation of Fatigue Cracks Using X‐Ray Tomography: From Synchrotron to Laboratory Sources
Jean-Yves Buffière (2010)
10.1007/S11771-011-0963-4
Numerical simulation of asphalt mixture based on three-dimensional heterogeneous specimen
Xiao-ning Zhang (2011)
10.1016/J.ACTAMAT.2009.08.009
Three-dimensional characterization of fatigue cracks in Ti-6246 using X-ray tomography and electron backscatter diffraction
S. Birosca (2009)
10.1016/J.ACTAMAT.2009.04.008
Quantification of the interaction within defect populations on fatigue behavior in an aluminum alloy
P. Li (2009)
10.1145/235815.235821
The quickhull algorithm for convex hulls
C. L. Barber (1996)
10.1007/s40134-012-0003-7
Recent Advances in CT Image Reconstruction
J. Hsieh (2013)
10.1179/174328008X277803
Recent advances in X-ray microtomography applied to materials
S. Stock (2008)
Heath: ‘Towards high performance digital volume correlation
M. Gates (2011)
Practical conebeam algorithm
L. A. Feldkamp (1984)
Permeability calculations on real Al-Cu microstructures assessed by 3D microtomography
D Bernard (2003)
X-ray nanotomography’, Mater
P. J. Withers (2007)
Insitu three-dimensional microstructural investigation of solidification of an Al-Cu alloy by ultrafast X-ray microtomography’, Metall
O. Ludwig (2005)
Kosanetzky: ‘Energy-dispersive Xray-diffraction tomography
G. Harding (1990)
10.1111/J.1460-2695.2009.01367.X
Prediction of residual fatigue life of aluminium foam through natural frequencies and damping shift
V. Dattoma (2009)
nm X-ray zone plates for X-ray imaging applications
(2007)
Mesure tridimensionnelle de champs cinematiques par imagerie volumi - que pour l ’ analyse des materiaux et des structures ( in French )
J. M. Chaix M. Bornert (2012)
10.1046/j.1365-2818.2002.01046.x
Quantitative X‐ray projection microscopy: phase‐contrast and multi‐spectral imaging
S. Mayo (2002)
10.1046/j.1365-2818.2000.00640.x
Soft X‐ray spectroscopy from image sequences with sub‐100 nm spatial resolution
Jacobsen (2000)
10.1016/J.OPTLASENG.2009.12.012
In situ investigation of ceramic sintering by synchrotron radiation X-ray computed tomography
F. Xu (2010)
10.1046/j.1365-2818.2002.01010.x
Simultaneous phase and amplitude extraction from a single defocused image of a homogeneous object
D. Paganin (2002)
10.1063/1.2125730
Short Focal Length Kirkpatrick-Baez Mirrors for a Hard X-Ray Nanoprobe
W. Liu (2005)
10.1063/1.3478197
Development of fast (sub‐minute) micro‐tomography
K. Uesugi (2010)
10.1063/1.2359288
Three-dimensional observation of nanoscopic precipitates in an aluminum alloy by microtomography with Fresnel zone plate optics
H. Toda (2006)
10.1016/J.MSEA.2011.06.045
Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
S. V. Bael (2011)
10.1088/0022-3727/42/21/214004
Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks
S. Roux (2009)
10.1016/J.COMMATSCI.2011.04.039
Advanced numerical method for generation of three-dimensional particles and its application in microstructure-based simulation of fatigue behavior
M. Milesi (2011)
10.1093/ACPROF:OSO/9780199213245.001.0001
Advanced tomographic methods in materials research and engineering
J. Banhart (2008)
10.1007/S10035-011-0257-4
Observing strain localisation processes in bio-cemented sand using x-ray imaging
Francesco Tagliaferri (2011)
10.1111/J.1151-2916.2000.TB01680.X
Elastic Properties of Model Porous Ceramics
A. Roberts (2000)
10.1107/S0909049512036783
A hard X-ray nanoprobe beamline for nanoscale microscopy
R. Winarski (2012)



This paper is referenced by
The use of X-ray computed tomography in timber construction research
J. Couceiro (2016)
10.1016/J.COMPSTRUCT.2016.10.124
X-ray computed tomography study of kink bands in unidirectional composites
Y. Wang (2017)
Étude numérique de la nocivité des défauts dans les soudures
L. Lacourt (2019)
Elastic moduli of porous polymeric biomaterials using 3 D μ CT image stack and FE characterization
J. Jing (2015)
Characterisation and quantification of microstructure, physicochemical and functional properties of oven and forced convection continuous tumble roasted cereal grains
Letitia Schoeman (2017)
10.1016/J.MSEA.2016.08.078
Reconstruction and quantitative characterization of the three dimensional microstructure model of TC6 titanium alloy based on dual-energy X-ray microtomography
G. Li (2016)
10.1016/J.SCRIPTAMAT.2017.02.018
Revealing the shear band cracking mechanism in metallic glass by X-ray tomography
R. T. Qu (2017)
10.3390/ma11122533
3D Imaging of Indentation Damage in Bone
T. Lowe (2018)
10.25560/45350
Advanced 3D imaging and quantification of battery materials
Moshiel Biton (2016)
10.1016/J.MSEA.2019.04.050
Dynamic deformation and failure process of quasi-closed-cell aluminum foam manufactured by direct foaming technique
R. Huang (2019)
10.1016/J.CORSCI.2018.05.019
3D reconstruction of plasma electrolytic oxidation coatings on Mg alloy via synchrotron radiation tomography
Xiaopeng Lu (2018)
10.1088/1757-899X/406/1/012006
Influence of voids presence on mechanical properties of 3D textile composites
Y. Chen (2018)
10.7717/peerj.3416
A study of the progression of damage in an axially loaded Branta leucopsis femur using X-ray computed tomography and digital image correlation
Zartasha Mustansar (2017)
10.1088/1361-6501/AA7E8A
A flexible and accurate digital volume correlation method applicable to high-resolution volumetric images
B. Pan (2017)
10.1149/2.0111704JES
3D characterization of diffusivities and its impact on mass flux and concentration overpotential in SOFC anodes
X. Lu (2017)
10.1016/j.mineng.2019.106016
Volume quantification in interphase voxels of ore minerals using 3D imaging
J. Godinho (2019)
10.1111/str.12337
Procedure for accurate calculation of the J‐integral from digital volume correlation displacement data
T. Becker (2020)
10.1007/s11837-019-03910-0
ICME Approach to Determining Critical Pore Size of IN718 Produced by Selective Laser Melting
M. Sangid (2020)
10.1016/J.MATCHAR.2015.12.003
Characterisation of three-dimensional dendritic morphology and orientation selection of α-Mg in Mg–Ca alloy using synchrotron X-ray tomography
Sansan Shuai (2016)
10.1016/J.JPOWSOUR.2016.12.070
Microstructural degradation of silicon electrodes during lithiation observed via operando X-ray tomographic imaging
O. Taiwo (2017)
10.1111/JACE.14041
2D‐ and 3D Observation and Mechanism of Self‐Healing in Glass–Boron Composites
Sandra Castanié (2016)
Physical Principles and Recent Advances of Medical Imaging Systems
Hamidreza Shirzadfar (2018)
10.1038/srep34346
Quantifying yield behaviour in metals by X-ray nanotomography
M. Mostafavi (2016)
Caractérisation et modélisation des réseaux de fissures pour la prédiction de la perméabilité des réservoirs composites stratifiés sans liner
Hortense Laeuffer (2017)
10.4028/www.scientific.net/MSF.828-829.433
3D X-Ray Inspection of a Radio Controlled Airplane Engine
Anton du Plessis (2015)
Structural Mechanical Simulation on Voxel Data
Roger WENDE (2018)
10.1017/S1551929516000316
Xe+ Plasma FIB: 3D Microstructures from Nanometers to Hundreds of Micrometers
T. Burnett (2016)
10.1016/J.ELECTACTA.2017.08.161
Investigation of cycling-induced microstructural degradation in silicon-based electrodes in lithium-ion batteries using X-ray nanotomography
O. Taiwo (2017)
10.1002/ceat.202000177
Positron Emission Particle Tracking for Liquid‐Solid Mixing in Stirred Tanks
C. Windows-Yule (2020)
10.1016/J.ACTAMAT.2015.08.026
The local strength of microscopic alumina reinforcements
Goran Žagar (2015)
10.1016/J.PRECISIONENG.2019.06.007
X-ray computed tomography: from medical imaging to dimensional metrology
H. Villarraga-Gómez (2019)
10.1016/J.MATCHAR.2019.06.020
Characterization of hierarchically structured electrodes with different thicknesses by means of experiments and image analysis
Matthias Neumann (2019)
See more
Semantic Scholar Logo Some data provided by SemanticScholar