Online citations, reference lists, and bibliographies.

Unconventional Methods For Forming Nanopatterns

M. E. Stewart, Michael J. Motala, J. Yao, L. Thompson, R. Nuzzo
Published 2006 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
Nanostructured materials have become an increasingly important theme in research, in no small part due to the potential impacts this science holds for applications in technology, including such notable areas as sensors, medicine, and high-performance integrated circuits. Conventional methods, such as the top-down approaches of projection lithography and scanning beam lithography, have been the primary means for patterning materials at the nanoscale. This article provides an overview of unconventional methods - both top-down and bottom-up approaches - for generating nanoscale patterns in a variety of materials, including methods that can be applied to fragile molecular systems that are difficult to pattern using conventional lithographic techniques. The promise, recent progress, advantages, limitations, and challenges to future development associated with each of these unconventional lithographic techniques will be discussed with consideration given to their potential for use in large-scale manufacturing.
This paper references
10.1021/j100126a003
Formation of ordered two-dimensional gold colloid lattices by electrophoretic deposition
M. Giersig (1993)
10.1117/1.1862647
Extreme ultraviolet lithography: overview and development status
P. Silverman (2005)
10.1108/03699420410560470
Challenges of UV curable ink‐jet printing inks – a formulator's perspective
Andrew H. Hancock (2004)
10.1116/1.589650
Optimization of experimental operating parameters for very high resolution focused ion beam applications
J. Giérak (1997)
10.1016/J.TIBTECH.2006.05.005
Trends in imprint lithography for biological applications.
V. Truskett (2006)
10.1002/ADMA.200501447
Direct-Write Assembly of Three-Dimensional Photonic Crystals: Conversion of Polymer Scaffolds to Silicon Hollow-Woodpile Structures**
Gregory M. Gratson (2006)
10.1021/JA029973K
A photocurable poly(dimethylsiloxane) chemistry designed for soft lithographic molding and printing in the nanometer regime.
K. Choi (2003)
10.1021/bi00237a005
Assembly and characterization of five-arm and six-arm DNA branched junctions.
Y. Q. Wang (1991)
10.1126/SCIENCE.1091022
DNA-Templated Carbon Nanotube Field-Effect Transistor
K. Keren (2003)
10.1002/ANIE.200600114
Multiple length-scale patterning of DNA by stamp-assisted deposition.
E. Bystrenova (2006)
10.1088/0957-4484/17/10/043
Stamp design effect on 100 nm feature size for 8 inch NanoImprint lithography.
S. Landis (2006)
10.1002/(SICI)1521-3773(19980904)37:16<2201::AID-ANIE2201>3.0.CO;2-E
Novel Hollow Polymer Shells by Colloid-Templated Assembly of Polyelectrolytes.
E. Donath (1998)
10.1038/NMAT1211
Nanostructure engineering by templated self-assembly of block copolymers
J. Cheng (2004)
10.1063/1.2360920
Alkylsiloxane self-assembled monolayer formation guided by nanoimprinted Si and SiO2 templates
A. Yasseri (2006)
10.1142/S0219581X06004747
DIRECT FORMATION OF NANOPORE ARRAY VIA FOCUSED ION BEAM FINE MILLING AND SURFACE COATING TECHNIQUES
Yongqi Fu (2006)
10.1002/1521-4095(200105)13:10<749::AID-ADMA749>3.0.CO;2-7
Room‐Temperature Imprint Lithography
Dahl-Young Khang (2001)
10.1063/1.121799
Fabrication of patterned electroluminescent polymers that emit in geometries with feature sizes into the submicron range
J. Rogers (1998)
10.1021/LA011652J
Molecular Transport from an Atomic Force Microscope Tip: A Comparative Study of Dip-Pen Nanolithography
P. Schwartz (2002)
10.1016/J.MEE.2004.12.085
Chemical patterning of sub-50-nm half pitches via nanoimprint lithography
S. Park (2005)
10.1021/MA0607564
Dimensions and Shapes of Block Copolymer Domains Assembled on Lithographically Defined Chemically Patterned Substrates
E. Edwards (2007)
10.1039/B606391H
Single-chain antibodies against DNA aptamers for use as adapter molecules on DNA tile arrays in nanoscale materials organization.
H. Li (2006)
10.1039/B600913C
Imparting size, shape, and composition control of materials for nanomedicine.
Larken E. Euliss (2006)
10.1002/(SICI)1521-3773(19990614)38:12<1808::AID-ANIE1808>3.0.CO;2-C
DNA-Based Assembly of Gold Nanocrystals.
Colin J. Loweth (1999)
10.1021/bi00064a003
DNA double-crossover molecules.
T. J. Fu (1993)
10.1063/1.100162
Deposition and imaging of localized charge on insulator surfaces using a force microscope
J. Stern (1988)
10.1021/LA061372+
Replica molding of high-aspect-ratio polymeric nanopillar arrays with high fidelity.
Y. Zhang (2006)
10.1080/14786440808564615
XXXVIII. A suggested method for extending microscopic resolution into the ultra-microscopic region
E. Synge
10.1021/JA058145Z
A study of DNA tube formation mechanisms using 4-, 8-, and 12-helix DNA nanostructures.
Yonggang Ke (2006)
10.1021/ja960151v
Micromolding in Capillaries: Applications in Materials Science
E. Kim (1996)
10.1063/1.2032609
Bendable GaAs metal-semiconductor field-effect transistors formed with printed GaAs wire arrays on plastic substrates
Y. Sun (2005)
10.1021/JA040811T
Solvent Resistant Photocurable “Liquid Teflon” for Microfluidic Device Fabrication [J. Am. Chem. Soc. 2004, 126, 2322−2323].
J. Rolland (2004)
10.1021/JA0383367
DNA-templated self-assembly of protein and nanoparticle linear arrays.
H. Li (2004)
10.1016/J.MEE.2006.01.254
Direct pattern transfer for sub-45nm features using nanoimprint lithography
N. Le (2006)
10.1117/1.1637366
Transparent fluids for 157-nm immersion lithography
R. Kunz (2004)
10.1117/12.487739
Extendibility of chemically amplified resists: another brick wall?
W. Hinsberg (2003)
10.1364/AO.18.003073
Contact printing method utilizing heated photoresist adhesive property for hologram copying.
Motoo Nakano (1979)
10.1002/1521-4095(200108)13:15<1164::AID-ADMA1164>3.0.CO;2-S
Hydrophilic Poly(dimethylsiloxane) Stamps for Microcontact Printing
C. Donzel (2001)
10.1126/SCIENCE.1081940
Ultrahigh-Density Nanowire Lattices and Circuits
N. Melosh (2003)
10.1116/1.590979
Lithographically induced self-assembly of periodic polymer micropillar arrays
S. Chou (1999)
10.1063/1.125582
Patterned polymer growth on silicon surfaces using microcontact printing and surface-initiated polymerization
N. L. Jeon (1999)
10.1021/JA021096V
What controls the melting properties of DNA-linked gold nanoparticle assemblies?
R. Jin (2003)
10.1021/LA990070N
Ordered Deposition of Inorganic Clusters from Micellar Block Copolymer Films
J. Spatz (2000)
10.1021/LA990610G
Tailored surfaces using optically manipulated colloidal particles
Cristina Mio (1999)
10.1021/JA0446045
DNA-directed self-assembling of carbon nanotubes.
S. Li (2005)
10.1021/cm011513n
Electroforming of Copper Structures at Nanometer-Sized Gaps of Self-assembled Monolayers on Silver
H. Yang (2002)
10.1021/NL051234P
Multilevel, room-temperature nanoimprint lithography for conjugated polymer-based photonics.
E. Mele (2005)
10.1002/ADMA.200400593
Three-Dimensional Nanofabrication with Rubber Stamps and Conformable Photomasks†
Seokwoo Jeon (2004)
10.1039/A700145B
Soft lithographic methods for nano-fabrication
X. Zhao (1997)
10.1063/1.115297
NEAR-FIELD DIRECT-WRITE ULTRAVIOLET LITHOGRAPHY AND SHEAR FORCE MICROSCOPIC STUDIES OF THE LITHOGRAPHIC PROCESS
I. Smolyaninov (1995)
10.1021/ja00109a002
A synthetic DNA molecule in three knotted topologies
S. M. Du (1995)
10.1126/science.240.4848.62
Molecular-Level Control over Surface Order in Self-Assembled Monolayer Films of Thiols on Gold
C. Bain (1988)
10.1063/1.1637143
Printing nanoparticle building blocks from the gas phase using nanoxerography
C. Barry (2003)
10.1021/NL0344007
Three-Dimensional and Multilayer Nanostructures Formed by Nanotransfer Printing
J. Zaumseil (2003)
10.1021/LA050011B
Masterless soft lithography: patterning UV/ozone-induced adhesion on poly(dimethylsiloxane) surfaces.
W. R. Childs (2005)
10.2494/PHOTOPOLYMER.19.641
High Refractive Index Fluid for Next Generation ArF Immersion Lithography
T. Furukawa (2006)
10.1088/1367-2630/6/1/101
Block copolymer micelle nanolithography on non-conductive substrates
R. Glass (2004)
10.1002/ANIE.200501089
Aptamer-directed self-assembly of protein arrays on a DNA nanostructure.
Y. Liu (2005)
10.1116/1.2122747
Bubbles in immersion lithography
M. Switkes (2005)
10.1116/1.2091091
Full wafer simulation of immersion fluid heating
M. Elmorsi (2005)
10.1098/rsta.2006.1902
Nanostructures in photovoltaics
Kylie R Catchpole (2006)
10.1021/LA011098D
Polymer-on-Polymer Stamping: Universal Approaches to Chemically Patterned Surfaces
Xueping Jiang (2002)
10.1002/1521-4117(200211)19:5<321::AID-PPSC321>3.0.CO;2-I
Nanostructured deposition of nanoparticles from the gas phase
Thomas Krinke (2002)
10.1016/J.MEE.2004.05.010
Ramifications of lubrication theory on imprint lithography
Matthew E. Colburn (2004)
10.1021/JP021550H
Dip-Pen Nanolithography: What Controls Ink Transport?
S. Rozhok (2003)
10.1021/JA0278584
Ordered nanoporous polymers from polystyrene-polylactide block copolymers.
A. S. Zalusky (2002)
10.1021/MA991896Z
Overcoming Interfacial Interactions with Electric Fields
T. Thurn-Albrecht (2000)
10.1126/SCIENCE.286.5439.523
Multiple ink nanolithography: toward a multiple-Pen nano-plotter
Hong (1999)
10.1021/CM9902467
Supercritical CO2 Processing for Submicron Imaging of Fluoropolymers
N. Sundararajan (2000)
10.1116/1.1421551
Nanoscale patterning using self-assembled polymers for semiconductor applications
K. Guarini (2001)
10.1002/adma.19950070513
Reduction in the size of features of patterned SAMs generated by microcontact printing with mechanical compression of the stamp
Y. Xia (1995)
10.1109/TEPM.2003.817714
Electron beam lithography in nanoscale fabrication: recent development
A. A. Tseng (2003)
10.1002/PAT.662
Recent progress in high resolution lithography
D. Bratton (2006)
10.1002/adma.19960081016
Fabrication of three‐dimensional micro‐structures: Microtransfer molding
X. Zhao (1996)
10.1063/1.2190899
Nanolithography by elastomeric scattering mask: An application of photolithographic standing waves
G. Kostovski (2006)
10.1002/ANIE.200503208
DNA-templated self-assembly of two-dimensional and periodical gold nanoparticle arrays.
J. Sharma (2006)
10.1116/1.587395
FUNDAMENTAL PRINCIPLES OF PHASE-SHIFTING MASKS BY FOURIER OPTICS - THEORY AND EXPERIMENTAL-VERIFICATION
K. Ronse (1994)
10.1116/1.2197508
Implementation of an imprint damascene process for interconnect fabrication
Gerard M. Schmid (2006)
10.1002/(SICI)1521-3773(19980316)37:5<550::AID-ANIE550>3.0.CO;2-G
Soft Lithography.
Y. Xia (1998)
10.1021/JP036538J
Selectively Assembled Co Nanoparticle Stripes Prepared by Covalent Linkage and Microcontact Printing
Sung-soo Bae (2004)
10.1016/J.SBI.2006.07.001
The architectonics of programmable RNA and DNA nanostructures.
L. Jaeger (2006)
10.1002/ANIE.200351818
A two-state DNA lattice switched by DNA nanoactuator.
Liping Feng (2003)
10.1109/JPROC.1998.658762
Cramming More Components Onto Integrated Circuits
G. E. Moore (1998)
10.1117/12.451270
Focused ion beam methods of nanofabrication: room at the bottom
R. Gerlach (2001)
10.1021/NL051932+
Fabrication of metallic nanodots in large-area arrays by mold-to-mold cross imprinting (MTMCI).
Sunghoon Kwon (2005)
10.1021/JP013570+
Angle-Resolved Nanosphere Lithography: Manipulation of Nanoparticle Size, Shape, and Interparticle Spacing
C. Haynes (2002)
10.1116/1.590454
Ion projection lithography: Status of the MEDEA project and United States/European cooperation
G. Gross (1998)
10.1021/MA9700993
Synthesis and Surface Energy Measurement of Semi-Fluorinated, Low-Energy Surfaces†
S. Perutz (1998)
10.1021/JP972289L
Wetting and capillary phenomena of water on mica
L. Xu (1998)
10.1021/LA9710482
Patterned Protein Layers on Solid Substrates by Thin Stamp Microcontact Printing
C. James (1998)
10.1116/1.1417547
Room temperature replication in spin on glass by nanoimprint technology
S. Matsui (2001)
10.1021/MA000559J
Morphology and Surface Relief Structures of Asymmetric Poly(styrene-block-ferrocenylsilane) Thin Films
R. G. Lammertink (2001)
10.1063/1.1375006
Direct three-dimensional patterning using nanoimprint lithography
Mingtao Li (2001)
10.1126/science.1132394
Heterogeneous Three-Dimensional Electronics by Use of Printed Semiconductor Nanomaterials
J. Ahn (2006)
10.1088/0957-4484/16/8/010
6 nm half-pitch lines and 0.04 νm 2 static random access memory patterns by nanoimprint lithography
M. D. Austin (2005)
10.1088/0957-4484/16/8/032
Sub-10 nanometre fabrication: molecular templating, electron-beam sculpting and crystallization of metallic nanowires
M. Remeika (2005)
10.1117/12.657574
The next phase for immersion lithography
Harry Sewell (2006)
10.1021/JA0367647
Replication of vertical features smaller than 2 nm by soft lithography.
B. D. Gates (2003)
Nanometerperiod gratings in hydrogen silsesquioxane fabricated by electron beam lithography
P. R. Berg (2003)
10.1039/B501599P
Nano-chemistry and scanning probe nanolithographies.
R. Garcia (2006)
10.1016/S0167-9317(02)00464-1
Improving stamps for 10 nm level wafer scale nanoimprint lithography
M. Beck (2002)
10.1088/0034-4885/48/6/002
REVIEW ARTICLE: Electron lithography for the fabrication of microelectronic devices
G. Owen (1985)
10.1002/1616-3028(200104)11:2<95::AID-ADFM95>3.0.CO;2-O
The Race for the Photonic Chip: Colloidal Crystal Assembly in Silicon Wafers
G. Ozin (2001)
10.1021/cm00019a010
Synthesis of silver and gold nanoclusters within microphase-separated diblock copolymers
Y. Chan (1992)
10.1021/NL061866R
Three-dimensional self-assembly of spherical block copolymer domains into V-shaped grooves.
V. P. Chuang (2006)
10.1063/1.119426
Nanoscale silicon field effect transistors fabricated using imprint lithography
Lingjie J. Guo (1997)
10.1038/29730
Controlling local disorder in self-assembled monolayers by patterning the topography of their metallic supports
J. Aizenberg (1998)
10.1049/ME:20050408
A new era dawns [equipment management]
K. Peng (2005)
10.1126/SCIENCE.290.5499.2126
Ultrahigh-density nanowire arrays grown in self-assembled diblock copolymer templates.
T. Thurn-Albrecht (2000)
10.1103/PHYSREVLETT.84.2997
Patterned colloidal deposition controlled by electrostatic and capillary forces.
J. Aizenberg (2000)
10.1038/35002540
Electrically induced structure formation and pattern transfer
Erik Schaeffer (2000)
10.1116/1.590052
A review of ion projection lithography
J. Melngailis (1998)
10.1116/1.590436
Problems of the nanoimprinting technique for nanometer scale pattern definition
H. Scheer (1998)
10.1002/1521-4095(20021104)14:21<1553::AID-ADMA1553>3.0.CO;2-9
Approaching nanoxerography: The use of electrostatic forces to position nanoparticles with 100 nm scale resolution
H. Jacobs (2002)
10.1021/MA050081P
Magnetic Field Induced Orientation in Diblock Copolymers with One Crystallizable Block
Tatyana Grigorova (2005)
10.1021/ja00098a055
Layer-by-Layer Assembly of Intercalation Compounds and Heterostructures on Surfaces: Toward Molecular "Beaker" Epitaxy
S. W. Keller (1994)
Nanoimprint lithography enables fabrication of subwavelength optics
Jian Wang (2005)
10.1116/1.1629711
Nanometer-period gratings in hydrogen silsesquioxane fabricated by electron beam lithography
M. Word (2003)
10.1116/1.1827218
Polyvinyl alcohol templates for low cost, high resolution, complex printing
C. Schaper (2004)
10.1016/0924-4247(93)00705-9
Development of piezoelectric micromovement actuator fabrication using a thick-film double-paste printing method
H. Moilanen (1994)
10.1016/J.MEE.2004.12.063
Design of low Tg thermosets for short cycle time nanoimprint lithography
F. Reuther (2005)
10.1021/NL0515495
Sequence-encoded self-assembly of multiple-nanocomponent arrays by 2D DNA scaffolding.
Yariv Y. Pinto (2005)
10.1021/la962029f
Nanometer-Scale Fabrication by Simultaneous Nanoshaving and Molecular Self-Assembly
Song Xu (1997)
10.1021/LA052954E
Novel 3-D structures in polymer films by coupling external and internal fields.
M. Dickey (2006)
10.1021/LA047674Y
Novel polymer patterns formed by lithographically induced self-assembly (LISA).
L. Chen (2005)
10.1002/adma.19970090712
Direct observation of chemical reactions in silica‐coated gold and silver nanoparticles
P. Mulvaney (1997)
10.1007/bfb0118623
Mechanism of Formation of Two-Dimensional Crystals from Latex Particles on Substrates
I. Ivanov (2001)
Layerby-layer assembly of intercalation compounds and heterostructures on surfaces: toward molecular “beaker
S. W. Keller (1994)
10.1021/NL0511972
Charging process and Coulomb-force-directed printing of nanoparticles with sub-100-nm lateral resolution.
C. Barry (2005)
10.1016/J.MEE.2006.01.251
Practical development and implementation of 193nm immersion lithography
M. McCallum (2006)
10.1126/science.273.5277.931
Local Control of Microdomain Orientation in Diblock Copolymer Thin Films with Electric Fields
T. L. Morkved (1996)
10.1002/ADFM.200500365
Multifaceted and Nanobored Particle Arrays Sculpted Using Colloidal Lithography
Dae-geun Choi (2006)
10.1021/CR9601324
Self-assembly of discrete cyclic nanostructures mediated by transition metals.
S. Leininger (2000)
10.1002/CHIN.199938263
Lithographic Imaging Techniques for the Formation of Nanoscopic Features
G. M. Wallraff (1999)
10.1063/1.122188
Exploiting the properties of carbon nanotubes for nanolithography
H. Dai (1998)
10.1016/S0921-5107(98)00183-4
Patterning of poly(3-alkylthiophene) thin films by direct-write ultraviolet laser lithography
T. Wong (1998)
10.1002/BBPC.19971011110
Chemistry of nanosized silica-coated metal particles-EM-study
M. Giersig (1997)
10.1063/1.373019
Fabrication of regularly arranged nanocolumns on diamond(100) using micellar masks
B. Koslowski (2000)
10.1021/JA017673H
Nanoscale molecular patterns fabricated by using scanning near-field optical lithography.
S. Sun (2002)
10.1557/MRS2005.248
Imprint Materials for Nanoscale Devices
M. Stewart (2005)
10.1021/NL0491778
Overpressure Contact Printing
Q. Guo (2004)
10.1016/S0167-9317(96)00197-9
Economic production of submicron ASICs with laser beam direct write lithography
C. Schomburg (1997)
10.1039/B517278K
Biomimetic silicification of 3D polyamine-rich scaffolds assembled by direct ink writing.
M. Xu (2006)
10.1002/ANIE.200461122
High-resolution soft lithography: enabling materials for nanotechnologies.
J. Rolland (2004)
10.1116/1.2388966
Layer thickness-induced lens distortions during thermal nanoimprint
H. Scheer (2006)
10.1021/NL050175C
Programmable DNA self-assemblies for nanoscale organization of ligands and proteins.
S. Park (2005)
10.1117/12.603718
Advanced mask metrology enabling characterization of imprint lithography templates
L. Myron (2005)
10.1002/SMLL.200500213
Fabrication of thin, metallic films along the sidewalls of a topographically patterned stamp and their application in charge printing.
T. Cao (2005)
10.1063/1.2140471
Printing electrode for top-contact molecular junction
K. Ojima (2005)
10.1557/MRS2005.247
Nanopatterning with UV Optical Lithography
M. Rothschild (2005)
10.1021/JA043436D
Approaching zero: using fractured crystals in metrology for replica molding.
Qiaobing Xu (2005)
10.1002/1521-4095(200109)13:18<1395::AID-ADMA1395>3.0.CO;2-0
Attaching silica nanoparticles from suspension onto surface charge patterns generated by a conductive atomic force microscope tip
P. Mesquida (2001)
10.1016/J.MEE.2004.02.036
Characterization of 8-in. wafers printed by nanoimprint lithography
C. Perret (2004)
10.1002/1616-3028(200104)11:2<147::AID-ADFM147>3.0.CO;2-W
Microcontact printing with heavyweight inks
M. Liebau (2001)
10.1117/1.2172991
Study of pattern placement error by thermal expansions in nanoimprint lithography
Y. Chen (2006)
10.1063/1.114851
Imprint of sub-25 nm vias and trenches in polymers
S. Chou (1995)
10.1021/LA0269098
Nanocontact Printing: A Route to Sub-50-nm-Scale Chemical and Biological Patterning
H. Li (2003)
10.1002/ADMA.200401994
Shear‐Induced Alignment in Thin Films of Spherical Nanodomains
D. Angelescu (2005)
10.1088/0957-4484/13/5/309
Diamond nanoimprint lithography
J. Taniguchi (2002)
10.1038/382609a0
Organization of 'nanocrystal molecules' using DNA
A. P. Alivisatos (1996)
10.1021/JA982824A
Modifying the Surface Features of Two-Dimensional DNA Crystals
Furong Liu (1999)
10.1021/JA9817601
Ligation of DNA Triangles Containing Double Crossover Molecules
Xiaoping Yang (1998)
10.1116/1.590024
Direct nano-printing on Al substrate using a SiC mold
S. Pang (1998)
10.1021/NL025754L
Generation of Nanostructures by Scanning Near-Field Photolithography of Self-Assembled Monolayers and Wet Chemical Etching
Shuqing Sun (2002)
10.1063/1.1384550
Self-assembly of ink molecules in dip-pen nanolithography: A diffusion model
J. Jang (2001)
10.1007/12_003
Patternable block copolymers
Mingqi Li (2005)
10.1016/J.MATERRESBULL.2006.05.021
Preparation of Pt-Ru-Ni ternary nanoparticles by microemulsion and electrocatalytic activity for methanol oxidation
X. Zhang (2007)
10.1016/j.talanta.2006.02.066
Stripping of photoresist on silicon wafer by CO(2) supercritical fluid.
Jian-Lian Chen (2006)
10.1126/science.1121401
A Stretchable Form of Single-Crystal Silicon for High-Performance Electronics on Rubber Substrates
Dahl-Young Khang (2006)
10.1116/1.1826058
Simulation and experimental study of polymer deformation in nanoimprint lithography
Y. Hirai (2004)
10.1117/12.485329
Immersion liquids for lithography in the deep ultraviolet
M. Switkes (2003)
10.1021/JA060882N
Janus and ternary particles generated by microfluidic synthesis: design, synthesis, and self-assembly.
Z. Nie (2006)
10.1016/0021-9797(91)90442-B
Preparation of hollow spherical particles of yttrium compounds
N. Kawahashi (1991)
10.2494/PHOTOPOLYMER.16.621
The Evolution of Materials for the Photolithographic Process
C. G. Willson (2003)
10.1117/12.577587
Evolution of light source technology to support immersion and EUV lithography
G. Blumenstock (2005)
10.1002/ADMA.200501936
Pattern registration between spherical block-copolymer domains and topographical templates
J. Cheng (2006)
10.1021/NL034867H
Template-induced growth of close-packed and non-close-packed colloidal crystals during solvent evaporation
J. P. Hoogenboom (2004)
10.1063/1.1767591
A printable form of silicon for high performance thin film transistors on plastic substrates
E. Menard (2004)
10.1109/DRC.1997.612486
Sub-10 nm imprint lithography and applications
Peter R. Krauss (1997)
10.1021/NL048835L
Fabricating semiconductor nano/microwires and transfer printing ordered arrays of them onto plastic substrates
Y. Sun (2004)
Design and self-assembly of twodimensional DNA crystals. Nature 394, 539-544
E. Winfree (1998)
10.1116/1.2132328
Electron beam lithography patterning of sub-10 nm line using hydrogen silsesquioxane for nanoscale device applications
In-Bok Baek (2005)
10.1063/1.1857069
Photonic band gaps and defect modes of polymer photonic crystal slabs
Chul-Sik Kee (2005)
10.1063/1.365847
Oxidation of hydrogen-passivated silicon surfaces by scanning near-field optical lithography using uncoated and aluminum-coated fiber probes
S. Madsen (1997)
10.1002/1521-4095(200108)13:15<1174::AID-ADMA1174>3.0.CO;2-Q
Formation of a Cobalt Magnetic Dot Array via Block Copolymer Lithography
J. Cheng (2001)
10.1021/JP000762G
Bolaamphiphile Nanotube-Templated Metallized Wires
H. Matsui (2000)
10.1021/LA970921W
Effect of Water on Lateral Force Microscopy in Air
R. Piner (1997)
10.1126/SCIENCE.277.5330.1232
Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites
Gero Decher (1997)
10.1073/pnas.072089599
Molecular self-assembly of surfactant-like peptides to form nanotubes and nanovesicles
Sylvain Vauthey (2002)
10.1038/44065
Materials: A class of porous metallic nanostructures
O. Velev (1999)
10.1021/MA982034L
Siloxane Polymers for High-Resolution, High-Accuracy Soft Lithography
H. Schmid (2000)
10.1063/1.1377625
Positioning of nanometer-sized particles on flat surfaces by direct deposition from the gas phase
Thomas Krinke (2001)
10.1103/PHYSREVLETT.88.156104
Thiol diffusion and the role of humidity in "Dip Pen Nanolithography".
P. Sheehan (2002)
10.1117/12.390082
Step and flash imprint lithography for sub-100-nm patterning
M. Colburn (2000)
10.1016/S0167-9317(03)00329-0
Improved step and flash imprint lithography templates for nanofabrication
D. Resnick (2003)
10.1063/1.118988
Using an elastomeric phase mask for sub-100 nm photolithography in the optical near field
J. Rogers (1997)
10.1021/JA0665141
Highly connected two-dimensional crystals of DNA six-point-stars.
Y. He (2006)
10.1021/NL0258473
Fabrication of sub-50-nm solid-state nanostructures on the basis of dip-pen nanolithography
H. Zhang (2003)
10.1021/ja00019a011
Comparison of the Structures and Wetting Properties of Self-Assembled Monolayers of n- Alkanethiols on the Coinage Metal Surfaces, Cu, Ag, Au'
P. E. Laibinis (1991)
10.1147/rd.411.0081
Negative photoresists for optical lithography
J. M. Shaw (1997)
10.1021/cm950464+
Microcontact Printing of Alkanethiols on Copper and Its Application in Microfabrication
Y. Xia (1996)
10.1116/1.1815299
Mold deformation in nanoimprint lithography
F. Lazzarino (2004)
10.1007/BF01831002
Reduction of multi-photon ionization in dielectrics due to collisions
D. Du (1996)
10.1557/MRS2006.209
Use of Nanotechnologies for Drug Delivery
P. Shah (2006)
10.1021/MA060087U
Defect Structure in Thin Films of a Lamellar Block Copolymer Self-Assembled on Neutral Homogeneous and Chemically Nanopatterned Surfaces
S. Kim (2006)
10.1021/ja00200a039
Formation of monolayers by the coadsorption of thiols on gold: variation in the head group, tail group, and solvent
C. Bain (1989)
10.1038/nature02307
A 1.7-kilobase single-stranded DNA that folds into a nanoscale octahedron
W. Shih (2004)
10.1038/nnano.2006.139
Controlled patterning of aligned self-assembled peptide nanotubes
M. Reches (2006)
10.1038/366324a0
Self-assembling organic nanotubes based on a cyclic peptide architecture
M. Ghadiri (1993)
10.1021/JP0475741
Fabrication of a Two-Dimensional Periodic Non-Close-Packed Array of Polystyrene Particles
B. J. Tan (2004)
10.1063/1.2363982
Guided self-assembly of diblock copolymer thin films on chemically patterned substrates.
X. Wu, (2006)
10.1021/la00036a014
Preparation of ordered colloid monolayers by electrophoretic deposition
M. Giersig (1993)
10.1063/1.2193653
Fabrication of 100 nm metal lines on flexible plastic substrate using ultraviolet curing nanoimprint lithography
Heon Lee (2006)
10.1002/CHIN.200227264
Dense Nanoparticulate Thin Films via Gold Nanoparticle Self‐Assembly.
D. Gittins (2002)
10.1126/SCIENCE.1057061
Submicrometer Patterning of Charge in Thin-Film Electrets
H. Jacobs (2001)
10.1063/1.124581
Low-voltage 0.1 μm organic transistors and complementary inverter circuits fabricated with a low-cost form of near-field photolithography
J. Rogers (1999)
10.1116/1.1420199
Characterization and modeling of volumetric and mechanical properties for step and flash imprint lithography photopolymers
M. Colburn (2001)
10.1201/b11626-12
Nanoimprint Lithography
S. Chou (1996)
10.1063/1.102999
Modification of hydrogen‐passivated silicon by a scanning tunneling microscope operating in air
J. Dagata (1990)
Semiconductor Lithography: Principles, Practices, and Materials
W. Moreau (1988)
10.1088/0957-4484/14/10/312
High density nanostructure transfer in soft molding using polyurethane acrylate molds and polyelectrolyte multilayers
Y. Kim (2003)
10.1146/annurev.pc.41.100190.002521
Block copolymer thermodynamics: theory and experiment.
Frank S. Bates (1990)
10.1007/BF01567218
Fabrication of nano-dot- and nano-ring-arrays by nanosphere lithography
M. Winzer (1996)
10.1116/1.1852467
Solvent-assisted polymer-bonding lithography
S. Luan (2005)
10.1088/0957-4484/9/2/016
Can charge writing aid nanotechnological manipulation
W. Wright (1998)
10.1117/12.359371
Critical point drying and cleaning for MEMS technology
I. Jafri (1999)
10.1016/J.SUSC.2005.09.037
Dip-pen nanolithography: A simple diffusion model
E. Antončík (2005)
10.1021/MA052335C
Long-Range Order and Orientation of Cylinder-Forming Block Copolymers on Chemically Nanopatterned Striped Surfaces
E. Edwards (2006)
10.1080/00218467408075037
Spreading of Polydimethylsiloxane Drops on Solid Horizontal Surfaces
V. Ogarev (1974)
10.1021/NL050108I
Three-helix bundle DNA tiles self-assemble into 2D lattice or 1D templates for silver nanowires.
S. Park (2005)
10.1002/ADMA.200500721
Two‐Polymer Microtransfer Molding for Highly Layered Microstructures
J. Lee (2005)
10.1002/anie.199013041
Perspectives in Supramolecular Chemistry—From Molecular Recognition towards Molecular Information Processing and Self‐Organization
J. Lehn (1990)
10.1116/1.571227
Submicroscopic pattern replication with visible light
U. Fischer (1981)
10.1002/1521-4095(200006)12:12<917::AID-ADMA917>3.0.CO;2-K
Optical Trapping for the Manipulation of Colloidal Particles
Cristina Mio (2000)
10.1117/12.600025
High refractive index immersion fluids for 193 nm immersion lithography
Bridgette M Budhlall (2004)
10.1021/NL048355U
Polymer Imprint Lithography with Molecular-Scale Resolution
Feng Hua (2004)
10.1117/1.1756917
Immersion lithography and its impact on semiconductor manufacturing
B. Lin (2004)
10.1021/LA034370N
Microcontact Printing Using Poly(dimethylsiloxane) Stamps Hydrophilized by Poly(ethylene oxide) Silanes
E. Delamarche (2003)
10.1063/1.1519356
Fabrication of nanostructures with long-range order using block copolymer lithography
J. Cheng (2002)
10.1088/0957-4484/12/2/321
Pattern formation in hot embossing of thin polymer films
H. Schift (2001)
10.1021/LA990023V
Preparation of unsymmetrical microspheres at the interfaces
Keiji Fujimoto (1999)
10.1016/S0169-4332(98)00840-X
Colloid monolayer lithography : a flexible approach for nanostructuring of surfaces
F. Burmeister (1999)
10.1063/1.372962
Photonic band in two-dimensional lattices of micrometer-sized spheres mechanically arranged under a scanning electron microscope
H. Miyazaki (2000)
10.1016/J.JPHOTOCHEM.2004.04.035
Nanopatterning with conformable phase masks
J. Maria (2004)
10.1021/JA0541938
Self-assembly of hexagonal DNA two-dimensional (2D) arrays.
Y. He (2005)
10.1080/10408430490888968
Applications of “Dry” Processing in the Microelectronics Industry Using Carbon Dioxide
C. A. Jones (2004)
10.1116/1.585373
A low magnification focused ion beam system with 8 nm spot size
R. L. Kubena (1991)
10.1088/0957-4484/14/2/323
Focused ion beam fabrication of silicon print masters
H. Li (2003)
10.1116/1.571180
Insitu vaporization of very low molecular weight resists using 1/2 nm diameter electron beams
M. Isaacson (1981)
10.1021/MA034739F
Block Copolymer Domain Reorientation in an Electric Field: An in-Situ Small-Angle X-ray Scattering Study
J. DeRouchey (2004)
10.1021/JA0441561
Binding and condensation of plasmid DNA onto functionalized carbon nanotubes: toward the construction of nanotube-based gene delivery vectors.
R. Singh (2005)
10.1021/JA065867X
A controlled-release strategy for the generation of cross-linked hydrogel microstructures.
Giovanni Talei Franzesi (2006)
10.1021/ma00063a010
Alignment of lamellar block copolymer microstructure in an electric field. 1. Alignment kinetics
K. Amundson (1993)
10.1021/NL061846P
Bulk quantities of single-crystal silicon micro-/nanoribbons generated from bulk wafers.
H. C. Ko (2006)
10.1021/JA035902P
DNA-templated nanotube localization.
Huijun Xin (2003)
10.1016/J.MEE.2005.01.013
Selective dry etch process for step and flash imprint lithography
N. Le (2005)
10.1021/LA0516476
Shear ordering in thin films of spherical block copolymer.
Gaurav Arya (2005)
10.1116/1.579726
Nanosphere lithography: A materials general fabrication process for periodic particle array surfaces
John C. Hulteen (1995)
10.1016/0022-5193(82)90002-9
Nucleic acid junctions and lattices.
N. Seeman (1982)
The “ Millipede ” — More than one thousand tips for future AFM data storage
Dürig (2000)
10.1021/AC0346712
Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices.
J. N. Lee (2003)
Quantum Interference Device Made by DNA Templating of Superconducting Nanowires
J. M. Headrick
10.1002/ELAN.200302915
Electrochemistry of DNA at Single‐Wall Carbon Nanotubes
Jianxiu Wang (2004)
10.1021/ja00246a011
Spontaneously organized molecular assemblies. 4. Structural characterization of n-alkyl thiol monolayers on gold by optical ellipsometry, infrared spectroscopy, and electrochemistry
M. Porter (1987)
10.1002/SMLL.200500528
Printed arrays of aligned GaAs wires for flexible transistors, diodes, and circuits on plastic substrates.
Y. Sun (2006)
10.1016/S0167-9317(01)00537-8
Multistep profiles by mix and match of nanoimprint and UV lithography
K. Pfeiffer (2001)
10.1126/SCIENCE.1071247
Sequence-Specific Molecular Lithography on Single DNA Molecules
K. Keren (2002)
10.1021/NL000182V
DNA Nicks and Nodes and Nanotechnology
N. Seeman (2001)
10.1021/NL005508E
Electrophoretic Isolation of Discrete Au Nanocrystal/DNA Conjugates
D. Zanchet (2001)
10.1080/14786443209461931
XXIII. An application of piezo-electricity to microscopy
E. Synge
10.1016/S0167-9317(02)00485-9
Room-temperature and low-pressure nanoimprint lithography
A. Lebib (2002)
10.1088/0957-4484/14/10/301
Printing nanoparticles from the liquid and gas phases using nanoxerography
C. Barry (2003)
10.1021/JA051977C
Direct fabrication and harvesting of monodisperse, shape-specific nanobiomaterials.
J. Rolland (2005)
10.1016/J.MEE.2006.01.213
Microtransfer molding of hydrophobic dendrimer
C. Thibault (2006)
10.1246/cl.1996.499
Effect of Capillary Force on Friction Force Microscopy : A Scanning Hydrophilicity Microscope
M. Fujihira (1996)
10.1126/science.272.5265.1145
The Self-Assembly Mechanism of Alkanethiols on Au(111)
G. Poirier (1996)
10.1021/CM049506X
Modified Polyelectrolyte Microcapsules as Smart Defense Systems
D. Shchukin (2004)
10.1021/NL0490826
From Functional Core/Shell Nanoparticles Prepared via Layer-by-Layer Deposition to Empty Nanospheres
Grégory Schneider and (2004)
10.1088/0960-1317/10/2/314
Focused ion beam induced deposition: fabrication of three-dimensional microstructures and Young's modulus of the deposited material
S. Reyntjens (2000)
10.1126/science.273.5273.347
Complex Optical Surfaces Formed by Replica Molding Against Elastomeric Masters
Y. Xia (1996)
10.1021/la960608e
Confinement-Induced Morphological Changes in Diblock Copolymer Films
N. Koneripalli (1996)
Fabrication of Three Dimensional Microstructures: Microtransfer Molding
X. Zhao (1996)
10.1016/J.MEE.2004.01.042
One-step lithography for various size patterns with a hybrid mask-mold
X. Cheng (2004)
10.1063/1.2164904
Transfer fabrication technique for embedded and inverted micro/nanostructures
Soonmin Seo (2006)
10.1002/adma.19970090914
Stability of molded polydimethylsiloxane microstructures
E. Delamarche (1997)
10.1002/(SICI)1521-4095(200006)12:11<787::AID-ADMA787>3.0.CO;2-1
Nanoscopic Templates from Oriented Block Copolymer Films
T. Thurn-Albrecht (2000)
10.1073/PNAS.0403048101
Fabricating complex three-dimensional nanostructures with high-resolution conformable phase masks.
Seokwoo Jeon (2004)
Toward largescale alignment of electrohydrodynamic patterning of thin polymer films
N. Wu (2006)
10.1002/CHIN.200527216
New Approaches to Nanofabrication: Molding, Printing, and Other Techniques
B. Gates (2005)
10.1021/NL0342287
Dichroic Optical Properties of Extended Nanostructures Fabricated Using Angle-Resolved Nanosphere Lithography
C. Haynes (2003)
10.1109/TNANO.2002.1005425
The "millipede" - nanotechnology entering data storage
P. Vettiger (2002)
10.1021/LA047884A
Large-area patterning of coinage-metal thin films using decal transfer lithography.
W. R. Childs (2005)
10.1016/S0167-9317(96)00210-9
Silicon micro/nanomechanical device fabrication based on focused ion beam surface modification and KOH etching
J. Brugger (1997)
10.1002/ANIE.200353009
Shear patterning of microdominos: a new class of procedures for making micro- and nanostructures.
B. D. Gates (2004)
10.1002/1521-3773(20010817)40:16<3069::AID-ANIE3069>3.0.CO;2-J
Combinatorial templates generated by dip-pen nanolithography for the formation of two-dimensional particle arrays.
L. Demers (2001)
10.1063/1.126137
Dense arrays of ordered GaAs nanostructures by selective area growth on substrates patterned by block copolymer lithography
R. Li (2000)
10.1038/35013018
Microdomain patterns from directional eutectic solidification and epitaxy
C. Rosa (2000)
10.1002/1439-7633(20020301)3:2/3<242::AID-CBIC242>3.0.CO;2-F
DNA‐Directed Assembly of Bienzymic Complexes from In Vivo Biotinylated NAD(P)H:FMN Oxidoreductase and Luciferase
C. Niemeyer (2002)
10.1021/NL0258271
Photonic Crystals Based on Periodic Arrays of Aligned Carbon Nanotubes
K. Kempa (2003)
10.1126/SCIENCE.290.5499.2120
Molybdenum nanowires by electrodeposition.
M. P. Zach (2000)
10.1146/ANNUREV.MATSCI.31.1.203
Patterned Magnetic Recording Media
C. Ross (2001)
10.1021/la970167e
Selective chemical vapor deposition of platinum and palladium directed by monolayers patterned using microcontact printing
Noo Li Jeon (1997)
10.1016/0021-9797(68)90272-5
Controlled growth of monodisperse silica spheres in the micron size range
W. Stoeber (1968)
10.1021/JA042393Y
Spontaneous "phase separation" of patterned binary alkanethiol mixtures.
Khalid S Salaita (2005)
10.1038/NMAT877
DNA-assisted dispersion and separation of carbon nanotubes
M. Zheng (2003)
10.1007/S10854-006-6761-3
Diamond nanopatterns fabricated by room-temperature nanoimprinting technology with diamond molds using polysiloxane
Shuji Kiyohara (2006)
Fundamentals of microfabrication : the science of miniaturization
M. Madou (2002)
10.1021/la00009a012
A Simple Method for the Production of a Two-Dimensional, Ordered Array of Small Latex Particles
R. Micheletto (1995)
10.1088/0957-4484/14/10/201
Nanostructure fabrication using block copolymers
I. W. Hamley (2003)
10.1209/0295-5075/9/3/011
“Janus Beads”: Realization and Behaviour at Water/Oil Interfaces
C. Casagrande (1989)
10.1002/ANIE.200502193
Sequence symmetry as a tool for designing DNA nanostructures.
Y. He (2005)
10.1016/0168-583X(93)90781-Z
Focused ion beam lithography
J. Melngailis (1993)
10.1143/JJAP.43.3767
5-nm-order electron-beam lithography for nanodevice fabrication
K. Yamazaki (2003)
10.1021/LA062110A
Relative humidity effects in dip-pen nanolithography of alkanethiol mixtures.
Omkar A. Nafday (2006)
10.1063/1.881357
Wavefront Engineering for Photolithography
Marc D. Levenson (1993)
10.1126/SCIENCE.1111041
Directed Assembly of Block Copolymer Blends into Nonregular Device-Oriented Structures
M. P. Stoykovich (2005)
10.1016/S1074-5521(00)00024-7
Atomic force microscopy of parallel DNA branched junction arrays.
R. Sha (2000)
10.1093/nar/14.24.9745
Three-arm nucleic acid junctions are flexible.
R. Ma (1986)
10.1117/12.29740
What IS a phase-shifting mask?
D. Levenson (1991)
10.1038/386137b0
Assembly of Borromean rings from DNA
C. Mao (1997)
10.1016/S0167-9317(01)00536-6
Characterization and application of a UV-based imprint technique
M. Otto (2001)
10.1016/S1369-7021(06)71539-5
Moore's law: the future of Si microelectronics
S. Thompson (2006)
10.1147/rd.411.0159
Lithography beyond light: Microcontact printing with monolayer resists
H. Biebuyck (1997)
10.1142/S0219581X05003139
ION BEAM LITHOGRAPHY AND NANOFABRICATION: A REVIEW
F. Watt (2005)
10.1088/0957-4484/17/21/016
Direct patterning of negative nanostructures on self-assembled monolayers of 16-mercaptohexadecanoic acid on Au(111) substrate via dip-pen nanolithography
Z. Zheng (2006)
10.1143/JJAP.42.3849
Elimination of Pattern Defects of Nanoimprint under Atmospheric Conditions
H. Hiroshima (2003)
10.1016/S0167-9317(03)00075-3
Fabrication of multi-tiered structures on step and flash imprint lithography templates
S. Johnson (2003)
10.1021/MA961686B
Thin diblock copolymer films on chemically heterogeneous surfaces
J. Heier (1997)
10.1021/JA9900398
Designed Two-Dimensional DNA Holliday Junction Arrays Visualized by Atomic Force Microscopy
C. Mao (1999)
10.1021/MA981249S
The Effect of Temperature Gradient on the Microdomain Orientation of Diblock Copolymers Undergoing an Order−Disorder Transition
T. Hashimoto (1999)
10.1111/j.1742-4658.2006.05602.x
Nanoparticle–enzyme hybrid systems for nanobiotechnology
I. Willner (2007)
10.1021/NL025670C
Three-Dimensional Nanostructure Construction via Nanografting: Positive and Negative Pattern Transfer
J. Liu (2002)
10.1116/1.1347039
Fabrication of ideally ordered anodic porous alumina with 63 nm hole periodicity using sulfuric acid
Hidetaka Asoh (2001)
10.1021/JA026973B
Paranemic cohesion of topologically-closed DNA molecules.
X. Zhang (2002)
10.1002/1521-4095(200106)13:11<795::AID-ADMA795>3.0.CO;2-1
A Route to Nanoscopic SiO2 Posts via Block Copolymer Templates
Hc-C. Kim (2001)
10.1002/1521-4095(200112)13:23<1793::AID-ADMA1793>3.0.CO;2-V
Platinated DNA as Precursors to Templated Chains of Metal Nanoparticles
W. E. Ford (2001)
10.1063/1.1378046
Large area dense nanoscale patterning of arbitrary surfaces
M. Park (2001)
10.1063/1.1493226
Additive, nanoscale patterning of metal films with a stamp and a surface chemistry mediated transfer process: Applications in plastic electronics
Y. Loo (2002)
10.1063/1.1289816
Conformal contact and pattern stability of stamps used for soft lithography
A. Bietsch (2000)
10.1117/1.2358112
Sober view on extreme ultraviolet lithography
B. J. Lin (2006)
10.1006/jmbi.1997.0918
A DNA decamer with a sticky end: the crystal structure of d-CGACGATCGT.
H. Qiu (1997)
10.1117/12.485075
Negative tone 193-nm photoresists
N. Pugliano (2003)
10.1039/B602886C
First blueprint, now bricks: DNA as construction material on the nanoscale.
Sethuramasundaram Pitchiaya (2006)
10.1038/nature01775
Epitaxial self-assembly of block copolymers on lithographically defined nanopatterned substrates
S. Kim (2003)
10.1021/NL049887D
Low-Pressure Nanoimprint Lithography
Dahl-Young Khang (2004)
10.1021/ja00116a033
USE OF CONTROLLED REACTIVE SPREADING OF LIQUID ALKANETHIOL ON THE SURFACE OF GOLD TO MODIFY THE SIZE OF FEATURES PRODUCED BY MICROCONTACT PRINTING
Y. Xia (1995)
10.1021/NL034016+
DNA-Templated Construction of Copper Nanowires
Christopher F. Monson (2003)
10.1021/LA048827K
Improved surface chemistries, thin film deposition techniques, and stamp designs for nanotransfer printing.
E. Menard (2004)
10.1021/JP054519Z
Microfabrication using elastomeric stamp deformation.
X. Fan (2006)
10.1002/ADMA.200601268
Antiadhesion surface treatments of molds for high-resolution unconventional lithography
M. Lee (2006)
10.1073/pnas.70.11.3240
Construction of biologically functional bacterial plasmids in vitro.
S. Cohen (1973)
10.1063/1.112799
Fabrication of visibly photoluminescent Si microstructures by focused ion beam implantation and wet etching
J. Xu (1994)
10.1016/S1369-7021(05)00702-9
Recent progress in soft lithography
J. Rogers (2005)
10.1021/ja00084a006
Construction of a DNA-Truncated Octahedron
Y. Zhang (1994)
10.1126/science.257.5067.189
Near-Field Optics: Microscopy, Spectroscopy, and Surface Modification Beyond the Diffraction Limit
E. Betzig (1992)
10.1117/12.487728
Resist requirements in the era of resolution enhancement techniques
J. S. Petersen (2003)
10.1039/B008534K
Opal chips: vectorial growth of colloidal crystal patterns inside silicon wafers
S. Yang (2000)
10.1117/1.1507335
Photoresists for microlithography, or the Red Queen's race
R. R. Dammel (2002)
10.1117/12.351155
Step and flash imprint lithography: a new approach to high-resolution patterning
Matthew E. Colburn (1999)
10.1063/1.882522
Block Copolymers—Designer Soft Materials
F. Bates (1999)
10.1116/1.589860
Lithography with a mask of block copolymer microstructures
C. Harrison (1998)
10.1002/1522-2683(200101)22:2<187::AID-ELPS187>3.0.CO;2-0
Nanofabrication: Conventional and nonconventional methods
Y. Chen (2001)
10.1116/1.1324618
Step and flash imprint lithography: Template surface treatment and defect analysis
T. Bailey (2000)
10.1038/nature05498
Label-free immunodetection with CMOS-compatible semiconducting nanowires
E. Stern (2007)
10.1021/LA000822+
Wetting Behavior of Block Copolymers on Self-Assembled Films of Alkylchlorosiloxanes: Effect of Grafting Density
R. D. Peters (2000)
10.1038/350631a0
Synthesis from DNA of a molecule with the connectivity of a cube
J. Chen (1991)
10.1117/12.695223
Enzyme electrodes immobilized on hetero-structured metallic nanowire array for glucose sensing
H. Yoon (2006)
10.1016/S0169-4332(99)00014-8
The deposition of anti-adhesive ultra-thin teflon-like films and their interaction with polymers during hot embossing
R. Jaszewski (1999)
10.1016/J.SSE.2006.03.028
Nanotechnology: Role in emerging nanoelectronics
B. Yu (2006)
10.1116/1.1523405
High-resolution transfer printing on GaAs surfaces using alkane dithiol monolayers
Y. Loo (2002)
10.1021/MA0526443
Bending Soft Block Copolymer Nanostructures by Lithographically Directed Assembly
G. Wilmes (2006)
10.1038/scientificamerican0907-12sp
The art of building small.
G. Whitesides (2001)
10.1038/40779
Entropy difference between crystal phases
P. Bolhuis (1997)
10.1039/B402293A
The single-step synthesis of a DNA tetrahedron.
R. P. Goodman (2004)
10.1116/1.2167077
Surface modification of silicon and polydimethylsiloxane surfaces with vapor-phase-deposited ultrathin fluorosilane films for biomedical nanodevices
B. Bhushan (2006)
10.1117/12.631046
Nanoimprint lithography: review of aspects and applications
D. J. Wagner (2005)
10.1016/S0167-7799(00)88950-7
Patterning self-assembled monolayers using microcontact printing: A new technology for biosensors?
M. Mrksich (1995)
10.1116/1.1880292
Development and characterization of silane antisticking layers on nickel-based stamps designed for nanoimprint lithography
M. Keil (2005)
10.1126/SCIENCE.1070821
Self-Assembly at All Scales
G. Whitesides (2002)
10.2494/PHOTOPOLYMER.19.555
Responding to the Challenge: Materials Design for Immersion Lithography
M. Padmanaban (2006)
10.1002/adma.19960080411
Gold nanoparticles in micellar poly(styrene)‐b‐poly(ethylene oxide) films—size and interparticle distance control in monoparticulate films
M. Moeller (1996)
10.1117/12.582435
Nanoimprint lithography: full wafer replication of nanometer features
R. Pelzer (2005)
10.1007/12_015
The Formation of Ordered Polymer Structures at Interfaces: A Few Intriguing Aspects
J. Sommer (2005)
10.1117/12.29750
Chromeless phase-shifted masks: a new approach to phase-shifting masks
K. Toh (1991)
10.1063/1.1947380
Extreme bendability of single-walled carbon nanotube networks transferred from high-temperature growth substrates to plastic and their use in thin-film transistors
Seung-Hyun Hur (2005)
10.1021/JA0479078
Microcontact printing of colloidal crystals.
Xin Yan (2004)
10.1238/PHYSICA.REGULAR.067A00357
Pattern Transfer using Step&Stamp Imprint Lithography
T. Haatainen (2003)
10.1021/JA011048V
Template-assisted self-assembly: a practical route to complex aggregates of monodispersed colloids with well-defined sizes, shapes, and structures.
Y. Yin (2001)
10.1021/MA980674I
Investigation of electrostatic interactions in polyelectrolyte multilayer films: Binding of anionic fluorescent probes to layers assembled onto colloids.
F. Caruso (1999)
10.1126/SCIENCE.283.5402.661
"Dip-Pen" nanolithography
Piner (1999)
10.1021/MA980705+
Using Surface Active Random Copolymers To Control the Domain Orientation in Diblock Copolymer Thin Films
Elbert E. Huang (1998)
10.1002/ANIE.199721981
Immobilization of Platinated and Iodinated Oligonucleotides on Carbon Nanotubes
S. Tsang (1997)
10.1021/MA970675V
Ordered diblock copolymer films on random copolymer brushes
P. Mansky (1997)
10.1002/(SICI)1521-4095(200003)12:5<333::AID-ADMA333>3.0.CO;2-X
Nano- and Microengineering: 3-D Colloidal Photonic Crystals Prepared from Sub-μm-sized Polystyrene Latex Spheres Pre-Coated with Luminescent Polyelectrolyte/Nanocrystal Shells
A. Rogach (2000)
10.1021/AR980081S
Nanofabrication of self-assembled monolayers using scanning probe lithography.
G. Y. Liu (2000)
10.1016/S0928-4931(01)00245-4
Characterisation of new thermosetting polymer materials for nanoimprint lithography
D. Lyebyedyev (2001)
10.1021/LA001211K
Soft Lithographic Approach to the Fabrication of Highly Ordered 2D Arrays of Magnetic Nanoparticles on the Surfaces of Silicon Substrates
Z. Zhong (2000)
10.1021/JA990858S
Patterning Disorder in Monolayer Resists for the Fabrication of Sub-100-nm Structures in Silver, Gold, Silicon, and Aluminum
A. J. Black (1999)
10.1021/NL025729F
Covalently Bonded Adducts of Deoxyribonucleic Acid (DNA) Oligonucleotides with Single-Wall Carbon Nanotubes: Synthesis and Hybridization
S. Baker (2002)
10.1146/ANNUREV.MATSCI.31.1.323
Block copolymer thin films : Physics and applications
M. J. Fasolka (2001)
10.1021/JA026355V
Interfacial chemistries for nanoscale transfer printing.
Y. Loo (2002)
10.1088/0022-3727/39/20/R01
The production of nanostructures by mechanical forming
Graham L. W. Cross (2006)
10.1063/1.2392960
Continuous ultraviolet roll nanoimprinting process for replicating large-scale nano-and micropatterns
Suho Ahn (2006)
10.1063/1.2405386
Three dimensional nanoporous density graded materials formed by optical exposures through conformable phase masks
Seokwoo Jeon (2006)
10.1021/CM047970W
DNA-Templated Assembly of Conducting Gold Nanowires between Gold Electrodes on a Silicon Oxide Substrate
A. Ongaro (2005)
10.1002/adma.19940060719
Microfabrication by microcontact printing of self‐assembled monolayers
J. Wilbur (1994)
10.1021/NL051804L
Fabrication of biological nanostructures by scanning near-field photolithography of chloromethylphenylsiloxane monolayers.
S. Sun (2006)
10.1021/nl062998n
Self-assembled combinatorial encoding nanoarrays for multiplexed biosensing.
Chenxiang Lin (2007)
10.1116/1.576399
Localized charge force microscopy
B. Terris (1990)
10.1016/J.MEE.2006.02.003
Compressed-carbon dioxide (CO2) assisted nanoimprint lithography using polymeric mold
W. M. Choi (2006)
10.1002/ADMA.200304496
Universal Route to Cell Micropatterning Using an Amphiphilic Comb Polymer
J. Hyun (2003)
10.1073/PNAS.0508047103
Beyond Rayleigh's criterion: a resolution measure with application to single-molecule microscopy.
S. Ram (2006)
10.1039/B605212F
Double cohesion in structural DNA nanotechnology.
Pamela E. Constantinou (2006)
10.1088/0957-4484/12/2/303
Nanoimprint lithography: challenges and prospects
S. Zankovych (2001)
10.1002/1521-4095(200007)12:14<1067::AID-ADMA1067>3.0.CO;2-M
Microcontact Printing of Proteins
A. Bernard (2000)
10.1038/NMAT789
Hierarchical structure formation and pattern replication induced by an electric field
Mihai D. Morariu (2003)
10.1063/1.1773933
Fabrication of high aspect ratio 100nm metallic stamps for nanoimprint lithography using proton beam writing
K. Ansari (2004)
10.1002/SMLL.200400073
Molding and replication of ceramic surfaces with nanoscale resolution.
M. A. Auger (2005)
10.1021/LA0513205
Fluorinated organic-inorganic hybrid mold as a new stamp for nanoimprint and soft lithography.
D. Choi (2005)
10.1021/ma00202a036
Characteristics of the surface-induced orientation for symmetric diblock PS/PMMA copolymers
T. P. Russell (1989)
10.1016/S0924-4247(98)00259-3
5×5 2D AFM cantilever arrays a first step towards a Terabit storage device
M. Lutwyche (1999)
10.1021/LA0113567
Constraints on Microcontact Printing Imposed by Stamp Deformation
C. Hui (2002)
10.1016/S0167-9317(00)00414-7
Flow behaviour of thin polymer films used for hot embossing lithography
L. Heyderman (2000)
10.1002/bip.360270902
The ligation and flexibility of four‐arm DNA junctions
M. L. Petrillo (1988)
10.1002/bip.360340105
The construction of a trefoil knot from a DNA branched junction motif
S. M. Du (1994)
10.1021/NL034207C
Electrical Contacts to Molecular Layers by Nanotransfer Printing
Y. Loo (2003)
10.1116/1.1585066
Embossing of polymers using a thermosetting polymer mold made by soft lithography
R. Xing (2003)
Molecular Dynamics Study on the Pattern Transfer in Nanoimprint Lithography
Kang Ji-hoon (2005)
10.1016/S1369-7021(06)71620-0
Block copolymer patterns and templates
Mingqi Li (2006)
10.1021/ma00162a016
Ordered bicontinuous double-diamond structure of star block copolymers: a new equilibrium microdomain morphology
E. Thomas (1986)
10.1002/ANIE.200462160
Adsorption and self-assembly of peptides on mica substrates.
C. Whitehouse (2005)
10.1080/713826373
Principles of Optics
E. H. Linfoot (1961)
10.1002/ANIE.200603142
Massively parallel dip-pen nanolithography with 55 000-pen two-dimensional arrays.
Khalid S Salaita (2006)
10.1016/J.MEE.2006.01.057
Fabrication of micro-photonic devices using embossing technique
Chul-hyun Choi (2006)
10.1021/CM051606V
Assembly of fullerene arrays templated by DNA scaffolds
C. Song (2005)
10.1016/S0076-6879(97)76051-8
[5] Response surface methods for optimizing and improving reproducibility of crystal growth.
C. Carter (1997)
10.1063/1.2062989
Recent Advances in Lithography and High Level Critical Dimension Metrology Needs for Lithography
S. Hector (2005)
10.1002/ADMA.200400643
Macroscopic Orientation of Block Copolymer Cylinders in Single‐Layer Films by Shearing
D. Angelescu (2004)
10.1116/1.1641056
Nanoimprint lithography of chromophore molecules under high-vacuum conditions
D. Pisignano (2004)
10.1021/la00018a034
Comparison of Organic Monolayers on Polycrystalline Gold Spontaneously Assembled from Solutions Containing Dialkyl Disulfides or Alkanethiols
H. Biebuyck (1994)
10.1063/1.1686045
Microtool fabrication by etch pit replication
D. Kiewit (1973)
10.1007/3-540-36412-9_6
Hollow Inorganic Capsules via Colloid-Templated Layer-by-Layer Electrostatic Assembly
F. Caruso (2003)
10.1017/S0016672308009476
A mechanism for gene conversion in fungi.
R. Holliday (2007)
10.1088/0957-4484/13/5/307
Nanoimprinted passive optical devices
J. Seekamp (2002)
10.1016/J.MEE.2007.01.134
Investigation of capillary bridges growth in NIL process
S. Landis (2007)
10.1002/1521-4095(200109)13:17<1312::AID-ADMA1312>3.0.CO;2-Z
Patterning Polymers by Micro‐Fluid‐Contact Printing
Mingtai Wang (2001)
10.1126/SCIENCE.288.5467.831
Micropatterning of organic electronic devices by cold-welding
Kim (2000)
10.1002/(SICI)1521-4095(200002)12:4<269::AID-ADMA269>3.0.CO;2-5
Patterning of Polymer Light‐Emitting Diodes with Soft Lithography
T. Granlund (2000)
10.1021/JP980198Y
Influence of Polyelectrolyte Multilayer Coatings on Förster Resonance Energy Transfer between 6-Carboxyfluorescein and Rhodamine B-Labeled Particles in Aqueous Solution
F. Caruso (1998)
10.1063/1.122263
Centimeter scale atomic force microscope imaging and lithography
S. Minne (1998)
10.1021/LA970454I
Microfabrication through Electrostatic Self-Assembly
Joe Tien (1997)
10.1021/JA020942Z
Decal transfer microlithography: a new soft-lithographic patterning method.
W. R. Childs (2002)
10.1063/1.1353844
Morphology and photonic band structure modification of polystyrene particle layers by reactive ion etching
T. Fujimura (2001)
10.1038/414735a
Hierarchical self-assembly of metal nanostructures on diblock copolymer scaffolds
W. A. Lopes (2001)
10.1021/CM0101632
Inkjet Printing for Materials and Devices
P. Calvert (2001)
10.1021/JA042789+
Wafer-scale periodic nanohole arrays templated from two-dimensional nonclose-packed colloidal crystals.
P. Jiang (2005)
10.1063/1.1803916
Patterning conductive copper by nanotransfer printing
K. Felmet (2004)
10.1143/JJAP.46.1808
Improvements of Defects by Patterning Using Thermal Nanoimprint Lithography
H. Park (2007)
10.1126/science.1962191
Molecular self-assembly and nanochemistry: a chemical strategy for the synthesis of nanostructures.
G. Whitesides (1991)
10.1038/nature04586
Folding DNA to create nanoscale shapes and patterns
P. Rothemund (2006)
10.1063/1.116192
NANOLITHOGRAPHIC TEMPLATES FROM DIBLOCK COPOLYMER THIN FILMS
P. Mansky (1996)
10.1021/JA0360034
Nanoporous materials with spherical and gyroid cavities created by quantitative etching of polydimethylsiloxane in polystyrene-polydimethylsiloxane block copolymers.
S. Ndoni (2003)
10.1116/1.2130352
Defect control in nanoimprint lithography
L. Chen (2005)
10.1002/ANIE.200503797
Finite-size, fully addressable DNA tile lattices formed by hierarchical assembly procedures.
S. Park (2006)
10.1021/NL0489438
A Novel Approach to Produce Protein Nanopatterns by Combining Nanoimprint Lithography and Molecular Self-Assembly
D. Falconnet (2004)
10.1126/SCIENCE.1139131
Plastic and Moldable Metals by Self-Assembly of Sticky Nanoparticle Aggregates
R. Klajn (2007)
10.1021/NL061719T
DPN-generated nanostructures as positive resists for preparing lithographic masters or hole arrays.
Khalid S Salaita (2006)
10.1002/ADMA.200300385
Inkjet Printing of Polymers: State of the Art and Future Developments
D. Gans (2004)
10.1021/LA060790B
Hydrophilic composite elastomeric mold for high-resolution soft lithography.
N. Lee (2006)
10.1109/10.930910
Aligned microcontact printing of biomolecules on microelectronic device surfaces
L. Lauer (2001)
10.1021/CM052694M
Nanopore and nanobushing arrays from ABC triblock thin films containing two etchable blocks
S. Guo (2006)
10.1002/1521-4095(200107)13:14<1111::AID-ADMA1111>3.0.CO;2-L
Recent Developments in Materials Synthesis and Processing Using Supercritical CO2
A. Cooper (2001)
10.1021/LA061334Q
Design of experiment for optimization of plasma-polymerized octafluorocyclobutane coating on very high aspect ratio silicon molds.
L. P. Yeo (2006)
Roomtemperature imprint lithography
298 Khang (2001)
10.1021/NL034851R
Microcontact Printing of Uniform Nanoparticle Arrays
V. Santhanam (2004)
10.1021/CM9911058
Core−Shell Particles and Hollow Shells Containing Metallo-Supramolecular Components
F. Caruso (1999)
10.1116/1.589836
Generating ∼90 nanometer features using near-field contact-mode photolithography with an elastomeric phase mask
J. Rogers (1998)
10.1103/PHYSREVB.63.060403
Tailoring exchange bias with magnetic nanostructures
K. Liu (2001)
10.1021/LA991584P
Patterned Electroless Deposition of Copper by Microcontact Printing Palladium(II) Complexes on Titanium-Covered Surfaces
H. Kind (2000)
10.1007/S00339-006-3744-4
Fabrication of high-aspect-ratio silicon nanostructures using near-field scanning optical lithography and silicon anisotropic wet-etching process
S. Kwon (2006)
10.1002/SMLL.200500028
Novel ultrananocrystalline diamond probes for high-resolution low-wear nanolithographic techniques.
Keun-Ho Kim (2005)
10.1063/1.110628
Features of gold having micrometer to centimeter dimensions can be formed through a combination of stamping with an elastomeric stamp and an alkanethiol ‘‘ink’’ followed by chemical etching
A. Kumar (1993)
10.1088/0957-4484/16/10/044
High-yield DNA-templated assembly of surfactant-wrapped carbon nanotubes.
Huijun Xin (2005)
Release Layers for Contact and Imprint Lithography
D. Resnick (2002)
10.1116/1.1619954
Why optical lithography will live forever
T. Brunner (2003)
10.1016/J.OPTLASTEC.2005.11.002
Recent developments in nanofabrication using scanning near-field optical microscope lithography
A. A. Tseng (2007)
10.1039/B607657B
A short water-soluble self-assembling peptide forms amyloid-like fibrils.
S. Ray (2006)
10.1002/MARC.200400462
Ink-Jet Printing, Self-Assembled Polyelectrolytes, and Electroless Plating: Low Cost Fabrication of Circuits on a Flexible Substrate at Room Temperature
K. Cheng (2005)
10.1002/ADMA.200304507
Benchtop Fabrication of Submicrometer Metal Line and Island Arrays Using Passivative Microcontact Printing and Electroless Plating
C. E. Moran (2003)
10.1038/nmat1532
Transfer printing by kinetic control of adhesion to an elastomeric stamp
M. Meitl (2006)
10.1016/S0928-4931(02)00221-7
Nanoimprint lithography: An alternative nanofabrication approach
C. Torres (2003)
10.1016/J.CPLETT.2004.05.042
DNA-mediated self-assembly of carbon nanotube-based electronic devices
M. Hazani (2004)
10.1088/0957-4484/15/10/021
Fabrication of cantilever based mass sensors inteagrated with CMOS using direct write laser lithography on resist
E. Forsen (2004)
10.1021/LA053377X
Uniformly sized gold nanoparticles derived from PS-b-P2VP block copolymer templates for the controllable synthesis of Si nanowires.
J. Lu (2006)
10.1143/JJAP.43.4050
Bi-layer resist method for room-temperature nanoimprint lithography
K. Nakamatsu (2003)
10.1021/cm00022a026
Synthesis of palladium and platinum nanoclusters within microphase-separated diblock copolymers
Y. Chan (1992)
10.1126/science.276.5317.1401
Block Copolymer Lithography: Periodic Arrays of ~1011 Holes in 1 Square Centimeter
Mi-ri Park (1997)
10.1002/(SICI)1521-3765(20000204)6:3<413::AID-CHEM413>3.0.CO;2-9
Hollow capsule processing through colloidal templating and self-assembly
Caruso (2000)
10.1063/1.119713
Demonstration of waveguide couplers fabricated using microtransfer molding
X. Zhao (1997)
10.1016/S0142-9612(99)00165-9
Patterning proteins and cells using soft lithography.
R. Kane (1999)
10.1002/ADMA.200306052
Preparation of arrays of isolated spherical cavities by self-assembly of polystyrene spheres on self-assembled pre-patterned macroporous films
M. Abdelsalam (2004)
10.1021/JP010657M
Nanosphere Lithography: A Versatile Nanofabrication Tool for Studies of Size-Dependent Nanoparticle Optics
C. Haynes (2001)
10.1103/PHYSREVLETT.88.255505
Effect of dissolution kinetics on feature size in dip-pen nanolithography.
B. Weeks (2002)
10.1021/AR010110Q
Poly(dimethylsiloxane) as a material for fabricating microfluidic devices.
J. C. Mcdonald (2002)
10.1021/LA020072Z
Assembly of Microsized Colloidal Particles on Electrostatic Regions Patterned through Ion Beam Irradiation
Hiroshi Fudouzi (2002)
10.1002/CHIN.200117227
Nanoengineering of Particle Surfaces
F. Caruso (2001)
10.1016/S0378-3812(01)00466-6
Morphological control of mesoscale colloidal models
Cristina Mio (2001)
10.1021/JP013219O
Mesoscopic Metal Particles and Wires by Electrodeposition
R. Penner (2002)
10.1116/1.2184327
Polymer to polymer to polymer pattern transfer : Multiple molding for 100 nm scale lithography
E. Mele (2006)
10.1002/ADFM.200500470
Electric-Field-Induced Pattern Morphologies in Thin Liquid Films†
N. Voicu (2006)
10.1021/ma60078a047
Theory of Microphase Separation in Block Copolymers
L. Leibler (1980)
10.1016/J.NIMB.2005.01.084
A progress review of proton beam writing applications in microphotonics
A. Bettiol (2005)
10.1038/385321a0
Template-directed colloidal crystallization
A. V. Blaaderen (1997)
10.1016/J.CRHY.2006.10.005
Optical lithography—present and future challenges
B. J. Lin (2006)
10.1038/372709a0
Self-assembling organic nanotubes based on a cyclic peptide architecture
J. Granja (1994)
10.1116/1.1545754
Room-temperature nanoimprint and nanotransfer printing using hydrogen silsequioxane
S. Matsui (2003)
10.1021/NL048589D
Large-Scale Fabrication of Ordered Nanobowl Arrays
X. Wang (2004)
10.1038/376581a0
Polymer microstructures formed by moulding in capillaries
E. Kim (1995)
10.1002/ADFM.200400295
Pattern‐Transfer Fidelity in Soft Lithography: The Role of Pattern Density and Aspect Ratio
T. Lee (2005)
10.1002/CHIN.200406297
Scanning Probe Lithography Using Self‐Assembled Monolayers
S. Kraemer (2004)
10.1039/B612304J
Large scale alignment of a lamellar block copolymer thin film via electric fields: a time-resolved SFM study.
V. Olszowka (2006)
10.1021/NL049345W
Sub-100 nm Triangular Nanopores Fabricated with the Reactive Ion Etching Variant of Nanosphere Lithography and Angle-Resolved Nanosphere Lithography
Alyson V. Whitney (2004)
10.1002/SMLL.200500050
Recent developments in nanofabrication using ion projection lithography.
A. A. Tseng (2005)
10.1016/S0167-9317(02)00528-2
Maskless electron beam lithography: prospects, progress, and challenges
T. Groves (2002)
10.1002/ADMA.200305832
Room‐Temperature Nanoimprint Lithography of Non‐thermoplastic Organic Films
D. Pisignano (2004)
10.1016/S1369-7021(05)00700-5
Step & flash imprint lithography
D. Resnick (2005)
10.1016/J.MEE.2004.12.006
Focused ion beam lithography for two dimensional array structures for photonic applications
S. Cabrini (2005)
10.1116/1.1627805
Sublithographic nanofabrication technology for nanocatalysts and DNA chips
Y. Choi (2003)
10.1080/00107518108231531
Electron beam lithography
R. W. Pease (1981)
10.1126/SCIENCE.282.5391.1111
Nanoengineering of inorganic and hybrid hollow spheres by colloidal templating
Caruso (1998)
10.1116/1.590438
Roller nanoimprint lithography
Hua Tan (1998)
10.1021/JA9815024
Electrostatic Self-Assembly of Silica Nanoparticle−Polyelectrolyte Multilayers on Polystyrene Latex Particles
F. Caruso (1998)
10.1021/JA993393E
Construction, analysis, ligation, and self-assembly of DNA triple crossover complexes
T. LaBean (2000)
10.1021/MA981538G
Single-Grain Lamellar Microdomain from a Diblock Copolymer
J. Bodycomb (1999)
10.1116/1.1521729
Polymer microring resonators fabricated by nanoimprint technique
Chung-Yen Chao (2002)
10.1063/1.109259
Selective area oxidation of silicon with a scanning force microscope
H. Day (1993)
10.1143/JJAP.45.4290
Room-Temperature Nanoimprint Lithography Using Photosensitive Dry Film
Ken-ichiro Nakamatsu (2006)
10.1021/la9507500
Microcontact Printing of Palladium Colloids: Micron-Scale Patterning by Electroless Deposition of Copper
P. C. Hidber (1996)
10.1021/JA031754R
Tensegrity: construction of rigid DNA triangles with flexible four-arm DNA junctions.
Dage Liu (2004)
10.1088/0022-3727/38/1/012
Uniformity across 200 mm silicon wafers printed by nanoimprint lithography
C. Gourgon (2005)
10.1021/LA048228D
Phase behavior and rheological properties of polyelectrolyte inks for direct-write assembly.
Gregory M. Gratson (2005)
10.1002/ANIE.200504022
Approaching the limit: can one DNA oligonucleotide assemble into large nanostructures?
H. Liu (2006)
10.1117/1.2198540
Measurements of the dynamic contact angle for conditions relevant to immersion lithography
Scott D. Schuetter (2006)
10.1021/JA047486U
Pseudohexagonal 2D DNA crystals from double crossover cohesion.
Baoquan Ding (2004)
10.1002/ADMA.200690089
Inside Front Cover: Buckled and Wavy Ribbons of GaAs for High‐Performance Electronics on Elastomeric Substrates (Adv. Mater. 21/2006)
Y. Sun (2006)
10.1021/JA0395893
Fabrication of metal structures with nanometer-scale lateral dimensions by sectioning using a microtome.
Qiaobing Xu (2004)
10.1116/1.1633281
Nanoimprint using three-dimensional microlens mold made by focused-ion-beam chemical vapor deposition
K. Watanabe (2004)
10.1021/JA0379969
Colloidal crystal films: advances in universality and perfection.
S. Wong (2003)
10.1016/J.DIAMOND.2006.02.007
From self-organized masks to nanotips: A new concept for the preparation of densely packed arrays of diamond field emitters
F. Weigl (2006)
10.1063/1.2206688
Mechanically flexible thin-film transistors that use ultrathin ribbons of silicon derived from bulk wafers
S. Mack (2006)
10.1021/ja960162o
ANTIPARALLEL DNA DOUBLE CROSSOVER MOLECULES AS COMPONENTS FOR NANOCONSTRUCTION
X. Li (1996)
10.1002/ANIE.200600438
Self-assembled signaling aptamer DNA arrays for protein detection.
Chenxiang Lin (2006)
10.1126/science.7624795
Fabrication of submicrometer features on curved substrates by microcontact printing.
R. J. Jackman (1995)
10.1002/MACP.200350018
Molecular and Microdomain Orientation in Semicrystalline Block Copolymer Thin Films by Directional Crystallization of the Solvent and Epitaxy
Cheolmin Park (2003)
10.1002/CHIN.200413268
The Evolution of Dip‐Pen Nanolithography.
D. Ginger (2004)
10.1021/ma00093a006
The Gyroid: A New Equilibrium Morphology in Weakly Segregated Diblock Copolymers
D. Hajduk (1994)
10.1073/PNAS.0305860101
DNA nanotubes self-assembled from triple-crossover tiles as templates for conductive nanowires.
Dage Liu (2004)
10.1038/344524a0
Positioning single atoms with a scanning tunnelling microscope
D. Eigler (1990)
10.1021/NL048635
DNA-Templated Self-Assembly of Metallic Nanocomponent Arrays on a Surface
J. D. Le (2004)
10.1016/S0040-6090(03)01412-3
Near-field photo-patterning of ultra-thin polymer films
Hiroyuki Aoki (2004)
10.1021/LA0513095
Submerged microcontact printing (SmuCP): an unconventional printing technique of thiols using high aspect ratio, elastomeric stamps.
F. Bessueille (2005)
10.1021/ma00112a041
Confined Block Copolymer Thin Films
N. Koneripalli (1995)
Principles of nucleis acid
W. Saenger (1984)
10.1002/CHIN.200429277
Nanolithography and Nanochemistry: Probe‐Related Patterning Techniques and Chemical Modification for Nanometer‐Sized Devices
D. B. Wouters (2004)
10.1088/0034-4885/68/1/R05
Nucleic Acid Nanostructures: Bottom-Up Control of Geometry on the Nanoscale.
N. Seeman (2005)
10.1002/ADMA.200400592
Patterning of Thin‐Film Microstructures on Non‐Planar Substrate Surfaces Using Decal Transfer Lithography
W. R. Childs (2004)
10.1116/1.1523404
Reversal imprinting by transferring polymer from mold to substrate
Xudong Huang (2002)
10.1103/PhysRevLett.72.2899
Observed frustration in confined block copolymers.
Lambooy (1994)
M.Micromolding in capillaries: applications in materials science
E. Kim (1996)
10.1002/ADMA.200306150
Patterning Colloidal Crystals by Lift‐up Soft Lithography
J. Yao (2004)
10.1016/J.MEE.2006.01.095
Directly patterning metal films by nanoimprint lithography with low-temperature and low-pressure
H. Chen (2006)
10.1016/J.TIBTECH.2006.02.009
Mastering the complexity of DNA nanostructures.
M. Brucale (2006)
10.1002/adma.19960081217
Microcontact printing with a cylindrical rolling stamp: A practical step toward automatic manufacturing of patterns with submicrometer‐sized features
Y. Xia (1996)
10.1126/SCIENCE.1069210
Tissue Engineering--Current Challenges and Expanding Opportunities
L. Griffith (2002)
10.1021/NL025503C
High-Resolution Contact Printing with Dendrimers
H. Li (2002)
10.1146/ANNUREV.BIOENG.3.1.335
Soft lithography in biology and biochemistry.
G. Whitesides (2001)
10.1021/LA020169L
Improved pattern transfer in soft lithography using composite stamps
T. Odom (2002)
10.1021/NL025612R
DNA as a Selective Metallization Template
M. Mertig (2002)
10.1126/SCIENCE.290.5496.1536
From micro- to nanofabrication with soft materials.
S. Quake (2000)
10.1063/1.480469
Transfer of a chemical substrate pattern into an island-forming diblock copolymer film
J. Heier (1999)
10.1002/ELPS.200305584
Microfluidic devices fabricated in Poly(dimethylsiloxane) for biological studies
S. Sia (2003)
10.1021/MA020647Z
Thermodynamic Interactions in Organometallic Block Copolymers: Poly(styrene-block-ferrocenyldimethylsilane)
H. Eitouni (2002)
Recent progress in nanoimprint technology and its applications
L. Guo (2004)
10.1088/0957-4484/17/5/028
Fabrication of nanopillars by nanosphere lithography
C. L. Cheung (2006)
10.1016/0030-4018(95)00280-L
Near field microscopy and lithography with uncoated fiber tips: a comparison
G. Krausch (1995)
10.1016/S0167-9317(02)00441-0
Maskless nanofabrication using the electrostatic attachment of gold particles to electrically patterned surfaces
P. Mesquida (2002)
10.1116/1.1627806
Focused ion beam-induced fabrication of tungsten structures
M. Ishida (2003)
10.1016/S0167-9317(01)00569-X
A contribution to the flow behaviour of thin polymer films during hot embossing lithography
H. Scheer (2001)
10.1016/J.CRHY.2006.10.007
Optical lithography—a historical perspective
K. Ronse (2006)
10.1021/JA0557177
Self-assembly of DNA double-double crossover complexes into high-density, doubly connected, planar structures.
D. Reishus (2005)
10.1063/1.464613
Molecular ordering of organosulfur compounds on Au(111) and Au(100): Adsorption from solution and in ultrahigh vacuum
L. Dubois (1993)
10.1002/CPHC.200600260
DNA tile based self-assembly: building complex nanoarchitectures.
Chenxiang Lin (2006)
10.1021/NL034031E
Nanoimprint Lithography for Hybrid Plastic Electronics
Michael C. McAlpine (2003)
10.1117/12.604662
Development of electron beam lithography for nanoscale devices
V. A. Zlobin (2005)
10.1063/1.1829774
Nanotransfer printing by use of noncovalent surface forces: Applications to thin-film transistors that use single-walled carbon nanotube networks and semiconducting polymers
S. H. Hur (2004)
10.1016/J.NIMB.2005.01.091
Proton beam fabrication of nickel stamps for nanoimprint lithography
K. Ansari (2005)
10.1002/ADMA.200600741
Highly Oriented Thin‐Film Microdomain Patterns of Ultrahigh Molecular Weight Block Copolymers via Directional Solidification of a Solvent
Jongseung Yoon (2006)
10.1021/LA0358668
Sub-100 nm patterning with an amorphous fluoropolymer mold.
D. Khang (2004)
10.1103/PHYSREVE.74.040801
Shear alignment of sphere-morphology block copolymer thin films with viscous fluid flow.
M. Wu (2006)
10.1081/DIS-120021792
New Developments in Soft Lithography
M. Brehmer (2003)
10.1002/ADFM.200390021
Preparation of Metallic Films on Elastomeric Stamps and Their Application for Contact Processing and Contact Printing
H. Schmid (2003)
Moore's Law: The History and Economics of an Observation that Changed the World
G. Hutcheson (2005)
10.1002/ADFM.200600225
Fabrication of High‐Density, Large‐Area Conducting‐Polymer Nanostructures
B. Dong (2006)
10.1021/JA0319083
Colloidal lithographic nanopatterning via reactive ion etching.
D. Choi (2004)
10.1002/ADMA.200400763
Precise Control over Molecular Dimensions of Block‐Copolymer Domains Using the Interfacial Energy of Chemically Nanopatterned Substrates
E. Edwards (2004)
10.1021/JA049956Q
Enzymatic nanolithography of a self-assembled oligonucleotide monolayer on gold.
J. Hyun (2004)
10.1039/B307788H
Microcontact printing of DNA-surfactant arrays on solid substrates
C. Xu (2003)
10.1021/JA038381E
Paranemic crossover DNA: a generalized Holliday structure with applications in nanotechnology.
Z. Shen (2004)
10.1021/LA062716Z
Simple method to produce Janus colloidal particles in large quantity.
L. Hong (2006)
10.1002/adma.19970090814
Solvent‐assisted microcontact molding: A convenient method for fabricating three‐dimensional structures on surfaces of polymers
E. King (1997)
10.1021/MA0018603
Large area orientation of block copolymer microdomains in thin films via directional crystallization of a solvent
C. Park (2001)
10.1021/NL015622C
Nanotubes Prepared by Templating Sacrificial Nickel Nanorods
K. Mayya (2001)
10.1126/SCIENCE.1071480
Direct Patterning of Modified Oligonucleotides on Metals and Insulators by Dip-Pen Nanolithography
L. Demers (2002)
10.1021/BM050230B
A new triple crossover triangle (TXT) motif for DNA self-assembly.
Bryan Wei (2005)
10.1021/NL049540A
Matching the Resolution of Electron Beam Lithography by Scanning Near-Field Photolithography
S. Sun (2004)
10.1021/LA046931W
Stability of microfabricated high aspect ratio structures in poly(dimethylsiloxane).
Pere Roca-Cusachs (2005)
10.1038/428386A
Microperiodic structures: Direct writing of three-dimensional webs
Gregory M. Gratson (2004)
10.1021/CR0300789
Self-assembled monolayers of thiolates on metals as a form of nanotechnology.
J. Love (2005)
10.1063/1.2347693
Fast three-dimensional nanostructure fabrication by laser-assisted nanotransfer printing
B. L. Drogoff (2006)
10.1063/1.106695
Multibeam laser manipulation and fixation of microparticles
H. Misawa (1992)
10.1016/J.MEE.2004.02.040
Anti-adhesive layers on Nickel stamps for nanoimprint lithography
S. Park (2004)
10.1002/ADFM.200500388
Hierarchical Pattern Formation in Thin Polymer Films Using an Electric Field and Vapor Sorption
S. Harkema (2005)
10.1002/ADFM.200600092
Toward Large‐Scale Alignment of Electrohydrodynamic Patterning of Thin Polymer Films
N. Wu (2006)
10.1147/rd.411.0039
High-numerical-aperture optical designs
R. Singh (1997)
10.1093/nar/23.12.2212
Relative stabilities of DNA three-way, four-way and five-way junctions (multi-helix junction loops): unpaired nucleotides can be stabilizing or destabilizing.
J. Kadrmas (1995)
10.1063/1.1611640
Narrow features in metals at the interfaces between different etch resists
V. C. Sundar (2003)
10.1023/A:1021145208328
Selfassembly of Metallic Nanoparticle Arrays by DNA Scaffolding
S. Xiao (2002)
10.1080/14786447408640996
XII. On the manufacture and theory of diffraction-gratings
Lord Rayleigh F.R.S.
10.1016/J.MEE.2006.01.038
Nickel stamp fabrication using step & stamp imprint lithography
T. Haatainen (2006)
10.1088/0960-1317/14/3/R01
Review on micro molding of thermoplastic polymers
M. Heckele (2004)
10.1002/chem.19960021213
Mineralization of Gold Nanoparticles in a Block Copolymer Microemulsion
J. Spatz (1996)
10.1016/J.TSF.2003.11.071
Laser pulse assisted nanoimprint lithography
V. Grigaliūnas (2004)
10.1063/1.2218818
Metal printing with modified polymer bonding lithography
X. Yu (2006)
10.1081/AL-120024632
Layer-by-Layer Biomolecular Assemblies for Enzyme Sensors, Immunosensing, and Nanoarchitectures
M. Campàs (2003)
10.1021/JP055264S
Transport rates vary with deposition time in dip-pen nanolithography.
J. R. Hampton (2005)
10.1021/ma00100a047
Alignment of Lamellar Block-Copolymer Microstructure in an Electric-Field .2. Mechanisms of Alignment
K. Amundson (1994)
10.1016/0924-4247(94)80060-X
A novel thick-film technique, gravure offset printing, for the realization of fine-line sensor structures
S. Leppävuori (1994)
10.1016/S0006-3495(03)75110-8
The flexibility of DNA double crossover molecules.
Phiset Sa-Ardyen (2003)
10.1117/1.1636768
Benefits and limitations of immersion lithography
J. Mulkens (2004)
10.1063/1.113020
Influence of capillary condensation of water on nanotribology studied by force microscopy
M. Binggeli (1994)
10.1002/1521-4095(200104)13:8<604::AID-ADMA604>3.0.CO;2-J
Fabrication of Nanometer-Scale Features by Controlled Isotropic Wet Chemical Etching**
J. Love (2001)
10.1063/1.1338967
Construction of highly conductive nanowires on a DNA template
J. Richter (2001)
10.1021/LA000079L
Patterning Surfaces Using Tip-Directed Displacement and Self-Assembly
N. Amro (2000)
10.1039/B311427A
Ionic surface masking for low background in single- and double-stranded DNA-templated silver and copper nanorods
Héctor A. Becerril (2004)
10.1021/LA049716O
Hydrophilic elastomers for microcontact printing of polar inks.
D. Trimbach (2004)
10.2494/PHOTOPOLYMER.18.579
Optical Lithography for the 32nm Node
H. Sewell (2005)
10.1021/JA0428208
Fabrication of non-close-packed arrays of colloidal spheres by soft lithography.
Xin Yan (2005)
10.1002/CHIN.200705259
Scanning Near-Field Photolithography — Surface Photochemistry with Nanoscale Spatial Resolution
G. Leggett (2007)
10.1088/0957-4484/16/8/020
Fabrication of metal nanowires by atomic force microscopy nanoscratching and lift-off process
Y. Chen (2005)
10.1002/chin.198341063
ADSORPTION OF BIFUNCTIONAL ORGANIC DISULFIDES ON GOLD SURFACES
R. Nuzzo (1983)
10.1063/1.120220
Nanostructure array fabrication with a size-controllable natural lithography
C. Haginoya (1997)
10.1116/1.585993
Electron beam lithography using MEBES IV
F. Abboud (1992)
10.1016/J.APSUSC.2005.12.166
Nanoimprint lithography using IR laser irradiation
V. Grigaliūnas (2006)
10.1002/ADMA.200500484
Sub‐10 nm High‐Aspect‐Ratio Patterning of ZnO Using an Electron Beam
M. Saifullah (2005)
10.1088/0960-1317/14/12/005
Polymer deformation and filling modes during microembossing
H. Rowland (2004)
10.1088/0268-1242/21/11/S01
Charge and spin transport in carbon nanotubes
C. Schönenberger (2006)
10.1016/J.MEE.2005.11.013
Distortion reduction by load release for imprint lithography
H. Li (2006)
10.1002/ADMA.200304824
Fabrication of Large‐Area Periodic Nanopillar Arrays for Nanoimprint Lithography Using Polymer Colloid Masks
Chun-Wen Kuo (2003)
10.1117/12.607236
Nanoimprint lithography: the path toward high-tech, low-cost devices (Keynote Paper)
W. Tong (2005)
10.1149/1.2128981
The Evolution of Silicon Semiconductor Technology: 1952–1977
B. Deal (1979)
10.1021/NL052210L
Periodic square-like gold nanoparticle arrays templated by self-assembled 2D DNA Nanogrids on a surface.
Junping Zhang (2006)
10.1063/1.2356784
Micron and submicron patterning of polydimethylsiloxane resists on electronic materials by decal transfer lithography and reactive ion-beam etching: Application to the fabrication of high-mobility, thin-film transistors
H. Ahn (2006)
10.1021/NL035005J
Guiding Polymers to Perfection: Macroscopic Alignment of Nanoscale Domains
D. Sundrani (2004)
10.1063/1.1651329
Fabrication of planar optical waveguides by electrical microcontact printing
D. Wolfe (2004)
10.1021/JP0452913
Theory of structure-based carbon nanotube separations by ion-exchange chromatography of DNA/CNT hybrids.
S. R. Lustig (2005)
10.1021/NL060994C
Two-dimensional nanoparticle arrays show the organizational power of robust DNA motifs.
J. Zheng (2006)
10.1088/0957-4484/16/9/065
Photopatterning of self-assembled monolayers at 244 nm and applications to the fabrication of functional microstructures and nanostructures
S. Sun (2005)
10.1021/MA0513012
Layer-by-Layer Assembled Janus Microcapsules
Z. Li (2005)
10.1002/1521-4095(200108)13:15<1152::AID-ADMA1152>3.0.CO;2-5
Graphoepitaxy of Spherical Domain Block Copolymer Films
R. Segalman (2001)
10.1088/0957-4484/13/5/311
DNA-functionalized single-walled carbon nanotubes
C. Dwyer (2002)
10.1002/1521-4095(200103)13:6<396::AID-ADMA396>3.0.CO;2-T
Structured Metallic Films for Optical and Spectroscopic Applications via Colloidal Crystal Templating
P. Tessier (2001)
10.1116/1.1420203
Step and flash imprint lithography: Defect analysis
T. Bailey (2001)
10.1063/1.1481980
Nanolithography based on patterned metal transfer and its application to organic electronic devices
Changsoon Kim (2002)
10.1002/(SICI)1521-4095(199910)11:15<1285::AID-ADMA1285>3.0.CO;2-J
Patterned Films of Nanotubes Using Microcontact Printing of Catalysts
H. Kind (1999)
10.1063/1.125143
DIRECT NANOIMPRINT OF SUBMICRON ORGANIC LIGHT-EMITTING STRUCTURES
J. Wang (1999)
10.1021/LA981591Y
Using Elastomeric Membranes as Dry Resists and for Dry Lift-Off
R. J. Jackman (1999)
10.1063/1.1488690
Patterning surfaces with colloidal particles using optical tweezers
J. P. Hoogenboom (2002)
10.1021/JA0209464
Generation of 30-50 nm structures using easily fabricated, composite PDMS masks.
T. Odom (2002)
10.1016/S0167-9317(03)00059-5
Sub-50 nm period patterns with EUV interference lithography
H. Solak (2003)
10.1063/1.1766071
Fabrication of 5 nm linewidth and 14 nm pitch features by nanoimprint lithography
M. D. Austin (2004)
10.1016/S1369-7021(05)00698-X
Projection optical lithography
M. Rothschild (2005)
10.1117/12.537609
Is ArF the final wavelength?
W. Conley (2004)
10.1116/1.1828087
Stamps for nanoimprint lithography by extreme ultraviolet interference lithography
S. Park (2004)
10.1063/1.1630162
Ultrafast patterning of nanostructures in polymers using laser assisted nanoimprint lithography
Q. Xia (2003)
10.1016/0025-5408(95)00088-7
A simple method of hydrogen insertion in transition metal oxides to obtain bronzes
S. Ayyappan (1995)
10.1016/J.TSF.2006.01.064
Fabrication of densely packed, well-ordered, high-aspect-ratio silicon nanopillars over large areas using block copolymer lithography
V. Gowrishankar (2006)
10.1021/NL050084F
Six-helix bundles designed from DNA.
F. Mathieu (2005)
10.1016/J.MEE.2006.01.242
Methods to reduce lithography costs with reticle engineering
R. S. MacKay (2006)
10.1021/ac950579x
Embossable grating couplers for planar waveguide optical sensors.
B. L. Ramos (1996)
10.1143/JJAP.44.3649
Inkjet Printing of Polymeric Field-Effect Transistors and Its Applications
Takeo Kawase (2005)
10.1002/ADMA.200601599
Solvent‐Vapor‐Assisted Imprint Lithography
N. Voicu (2007)
10.1529/BIOPHYSJ.106.091769
pH-dependent self-assembly of polyalanine peptides.
Kalyan Giri (2007)
10.1116/1.1808715
Full-field exposure performance of electron projection lithography tool
K. Suzuki (2004)
10.1016/S0167-9317(99)00006-4
Ultrahigh density, high-data-rate NEMS-based AFM data storage system
P. Vettiger (1999)
10.1063/1.2349837
Bendable GaN high electron mobility transistors on plastic substrates
K. Lee (2006)
10.1088/0960-1317/16/10/008
Stamps for nanoimprint lithography fabricated by proton beam writing and nickel electroplating
K. Ansari (2006)
10.1021/jp035468d
Fabrication of size-tunable large-area periodic silicon nanopillar arrays with Sub-10-nm resolution
Chun-Wen Kuo (2003)
10.1023/A:1018565428355
New solid and hollow, magnetic and non-magnetic, organic-inorganic monodispersed hybrid microspheres: synthesis and characterization
H. Bamnolker (1997)
10.1146/annurev.pc.43.100192.002253
Synthesis, Structure, and Properties of Model Organic Surfaces
L. Dubois (1992)
10.1002/ADFM.200600434
Direct ink writing of 3D functional materials
J. Lewis (2006)
10.1002/ADFM.200305055
Morphology‐Controlled Growth of Large‐Area Two‐Dimensional Ordered Pore Arrays
Fengqiang Sun (2004)
10.2494/PHOTOPOLYMER.17.417
Step and Flash Imprint Lithography modeling and process development
S. Johnson (2004)
10.1021/LA036332+
Effect of stamp deformation on the quality of microcontact printing: theory and experiment.
K. Sharp (2004)
10.1063/1.2386936
Orientation and symmetry control of inverse sphere magnetic nanoarrays by guided self-assembly
M. E. Kiziroglou (2006)
10.1002/1521-4095(20020816)14:16<1160::AID-ADMA1160>3.0.CO;2-1
Metallodielectric opals of layer-by-layer processed coated colloids
Z. Liang (2002)
10.1073/PNAS.0603247103
Soft-lithographic replication of 3D microstructures with closed loops.
Christopher N Lafratta (2006)
10.1117/12.602025
Characterization of ArF immersion process for production (Invited Paper)
J. Chen (2004)
10.1039/B606706A
Scanning near-field photolithography--surface photochemistry with nanoscale spatial resolution.
G. Leggett (2006)
10.1039/B305074M
Fabrication of thermoset polyester microfluidic devices and embossing masters using rapid prototyped polydimethylsiloxane molds.
Gina S. Fiorini (2003)
10.1116/1.1313582
Aqueous-based photoresist drying using supercritical carbon dioxide to prevent pattern collapse
D. Goldfarb (2000)
10.1021/LA000277C
Selective Self-Organization of Colloids on Patterned Polyelectrolyte Templates
K. M. Chen (2000)
10.1116/1.590199
Focused-ion-beam-assisted etching of diamond in XeF2
J. Taniguchi (1998)



This paper is referenced by
10.1088/0957-4484/26/25/255301
Density patterns in metal films produced by laser interference.
Ramón Javier Peláez (2015)
10.1021/nn201464t
Soft embossing of nanoscale optical and plasmonic structures in glass.
J. Yao (2011)
10.3384/DISS.DIVA-111841
Nanoplasmonic Sensing using Metal Nanoparticles
Erik Martinsson (2014)
10.1021/am100434g
Survey of materials for nanoskiving and influence of the cutting process on the nanostructures produced.
D. Lipomi (2010)
10.1038/srep03396
Fabrication and Characterization of Flexible and Tunable Plasmonic Nanostructures
Mehmet Kahraman (2013)
10.1007/s11664-014-3071-z
Molds and Resists Studies for Nanoimprint Lithography of Electrodes in Low-Voltage Polymer Thin-Film Transistors
Marco R. Cavallari (2014)
Synthesis and characterization of nanoperforated metal oxide thin films
Q. Xu (2016)
10.1002/smll.200801058
Magnetolithography: from bottom-up route to high throughput.
Amos Bardea (2009)
10.1039/B900518H
Hierarchical inorganic nanopatterning (INP) through direct easy block-copolymer templating
Monika Kuemmel (2009)
10.2494/PHOTOPOLYMER.22.223
Surface Nanopatterning by Polymer Self-Assembly: from Applied Research to Industrial Applications
Raphaël Pugin (2009)
10.1002/adma.200904097
Functional nanostructured plasmonic materials.
J. Yao (2010)
10.1038/srep02550
Digital Imprinting of RNA Recognition and Processing on a Self-Assembled Nucleic Acid Matrix
Shiv K. Redhu (2013)
10.1021/ja908675c
Magnetolithographic patterning of inner walls of a tube: a new dimension in microfluidics and sequential microreactors.
Amos Bardea (2009)
Analyse expérimentale de l'effet de la texturation des patins sur le comportement des butées hydrodynamiques à géométrie fixe
Y. Henry (2013)
10.1016/B978-0-12-381312-1.00001-8
Magnetolithography: From the Bottom-Up Route to High Throughput
Amos Bardea (2010)
10.1007/978-1-4614-3933-2_9
Functional Nanoimprinted Plasmonic Crystals for Chemical Sensing and Imaging
An-Phong Le (2012)
10.1021/nn8003789
Nanopatterning of transition metal surfaces via electrochemical dimple array formation.
Sherdeep Singh (2008)
Assemblage électrostatique dirigé de nanoparticules colloïdales sur des surfaces par nanoxérographie par microscopie à force atomique
E. Palleau (2011)
10.1007/s11671-009-9386-7
Micro/Nanoscale Parallel Patterning of Functional Biomolecules, Organic Fluorophores and Colloidal Nanocrystals
S. Sabella (2009)
10.1109/ICSEE.2016.7806184
Magneto-lithography, a simple and inexpensive method for high-throughput, surface patterning
Amos Bardea (2016)
THz resonances in semiconductor structures
M. C. Schaafsma (2015)
10.1063/1.2939563
Sidewall corrugation lithography: Bulk fabrication of ordered nanowires, nanoribbons, and nanorings
G. Kostovski (2008)
10.2174/187221010792483681
Recent developments in the fabrication of ordered nanostructure arrays based on nanosphere lithography.
Xueyong Wei (2010)
10.1109/TNANO.2017.2672925
Magneto–Lithography, a Simple and Inexpensive Method for High Throughput, Surface Patterning
Amos Bardea (2017)
10.1109/ICSEE.2018.8646279
Novel Approach of Backside Lithography Using Dynamic Magnetic Mask
Amos Bardea (2018)
Semantic Scholar Logo Some data provided by SemanticScholar