Online citations, reference lists, and bibliographies.
← Back to Search

Relationships Between Fibre Distribution, Workability And The Mechanical Properties Of SFRC Applied To Precast Roof Elements

L. Ferrara, A. Meda
Published 2005 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
A series of 40 precast prestressed roof elements was cast, employing a self-compacting steel fibre reinforced concrete (SCSFRC). They are being used in an industrial building. The fibre distribution within the roof elements was investigated by means of a suitable test procedure and correlated with results obtained from cube samples drawn from the batches and tested in the fresh state. Companion slabs were also cast and tested under four point bending, in order to study the correlation between fibre distribution and the mechanical properties of the composite. The work presented here analyses the correlation between fibre distribution, workability and mechanical properties of steel fibre reinforced concrete (SFRC) with the aim of optimising both its fresh- and hardened-state properties for a series production of precast SFRC roof elements.
This paper references
10.14359/12280
A Comparative Evaluation of Concrete Reinforced with Straight Steel Fibers and Fibers with Deformed Ends Glued Together into Bundles
V. Ramakrishnan (1980)
Failure and toughness of steel fiber reinforced concrete under tension and shear
B. Barragán (2002)
10.14359/317
USE OF VISCOSITY-MODIFYING ADMIXTURE TO ENHANCE STABILITY OF FLUID CONCRETE
K. Khayat (1997)
10.1007/BF02483119
Experimental and theoretical investigation of the shear resistance of steel fibre reinforced prestressed concrete X-beams—Part I: Experimental work
K. Elliott (2002)
10.14359/2494
TENSILE STRENGTH OF STEEL FIBER REINFORCED CONCRETE: CORRELATION WITH SOME MEASURES OF FIBER SPACING
P. Soroushian (1990)
The use of steel fibres in self-compacting concrete
P. Groth (1999)
10.14359/7151
STEEL FIBERS AS SHEAR REINFORCEMENT IN BEAMS
G. Batson (1972)
10.1617/2351580168.012
HPSFRC prestressed roof elements
M. Prisco (2003)
10.1007/BF02479076
Steel fibre reinforced concrete. The effect on fibre orientation of compaction by vibration
J. Edgington (1972)
10.1007/BF02483120
Experimental and theoretical investigation of the shear resistance of steel fibre reinforced prestressed concrete X-beams—Part II: Theoretical analysis and comparison with experiments
K. Elliott (2002)
10.1533/9780857093103.287
THE USE OF VISCOSITY ENHANCING ADMIXTURES TO IMPROVE THE HOMOGENEITY OF FIBRE DISTRIBUTION IN STEEL FIBRE REINFORCED CONCRETES
L. Ferrara (2003)
10.14359/9751
Effect of Steel Fiber Reinforcement on Fresh Mix Propertiesof Concrete
M. Z. Bayasi (1992)



This paper is referenced by
10.1080/21650373.2014.989555
Citius, altius, fortius/faster, higher, tougher: pushing ahead the boundaries of structural concrete through fiber-reinforced cementitious composites with adapted rheology
L. Ferrara (2016)
Toughness Based Analysis and Design of Fiber Reinforced Concrete
Christopher Barsby (2011)
10.1002/SUCO.201700068
An overview of the flexural post-cracking behavior of steel fiber reinforced concrete
G. Tiberti (2018)
10.1016/j.cemconcomp.2020.103747
Service life prediction of steam-cured concrete utilizing in-situ air permeability measurements
M. Nguyen (2020)
10.1007/978-90-481-9664-7_33
Design with Highly Flowable Fiber-Reinforced Concrete: Overview of the Activity of fib TG 8.8
Liberato Ferrara (2010)
10.1016/J.CONBUILDMAT.2013.12.094
Workability and compressive strength of ductile self compacting concrete (DSCC) with various cement replacement materials
M. F. Nuruddin (2014)
10.1109/IMTC.2010.5488179
Steel fiber reinforced concrete characterization based on a magnetic probe
Marco Faifer (2010)
10.1016/J.CSCM.2019.E00219
High performance fibre reinforced cementitious composites: Six memos for the XXI century societal and economical challenges of civil engineering
L. Ferrara (2019)
DEVELOPMENT OF UHPC FROM MATERIALS AVAILABLE IN CZECH REPUBLIC
J. Kolísko (2013)
10.1016/J.CONBUILDMAT.2018.02.162
Effects of different deformed steel-fibers on preparation and fundamental properties of self-compacting SFRC
X. Ding (2018)
10.1016/J.CONBUILDMAT.2014.04.067
Fibre distribution in macro-plastic fibre reinforced concrete slab-panels
P. Pujadas (2014)
CONSTITUTIVE MICROPLANE AND INTERFACE LAWS FOR MULTISCALE ANALYSIS OF STEEL FIBER CONCRETE
G. Etse (2012)
Palm leaves reinforced calcium carbonate/adhesive/polyaluminium chloride as a potential roofing material
Muhd. Hafiz Abu Hassan (2007)
10.1007/978-3-319-03245-0_6
Fiber Reinforced SCC
Liberato Ferrara (2014)
10.1088/1757-899X/385/1/012028
Experimental assessment of steel fibre reinforced concretes with different concentrations of fibres
Tereza Komárková (2018)
10.1016/J.ENGSTRUCT.2017.05.014
Shear behaviour of prestressed double tees in self-compacting polypropylene fibre reinforced concrete
Antonio Conforti (2017)
10.1016/J.CONBUILDMAT.2014.07.037
Backcalculation of residual tensile strength of regular and high performance fiber reinforced concrete from flexural tests
B. Mobasher (2014)
10.1016/J.CONBUILDMAT.2017.01.104
Influence of fibres on the mechanical behaviour of fibre reinforced concrete matrixes
T. Simões (2017)
10.1109/TIM.2010.2090059
Nondestructive Testing of Steel-Fiber-Reinforced Concrete Using a Magnetic Approach
M. Faifer (2011)
Requirements for Use of Field-Cast, Proprietary Ultra-High-Performance Concrete in Florida Structural Applications
Kyle A. Riding (2019)
Response to the reviewers of the manuscript ENGSTRUCT D-16-00912 Structural elements made with highly flowable UHPFRC: can Computational Fluid Dynamics (CFD) and non-destructive survey of fiber dispersion complement structural design in predicting failure modes?
L. Ferrara (2016)
Self-consolidating concrete: now and future
S. Shah (2009)
10.1016/j.engstruct.2019.109636
Geometrical and material optimisation of deformed steel fibres: Spirally deformed fibres
M. Hajsadeghi (2019)
10.1007/s10704-012-9733-z
Multiscale failure analysis of fiber reinforced concrete based on a discrete crack model
G. Etse (2012)
10.1617/S11527-011-9793-Y
A magnetic method for non destructive monitoring of fiber dispersion and orientation in steel fiber reinforced cementitious composites—part 1: method calibration
L. Ferrara (2012)
10.1080/19648189.2009.9693124
Influence de la rhéologie des bétons renforcés de fibres métalliques sur leurs propriétés mécaniques
Bensaid Boulekbache (2009)
10.1063/1.4965080
Steel Fibre Reinforced Self-Compacting Concrete (SFRSC) performance in slab application: A review
Hazrina Ahmad (2016)
10.1088/1757-899x/615/1/012094
Flexural performance of full and partially steel fibre reinforced self-compacting concrete (SCFRC) ribbed slab
Hazrina Ahmad (2019)
10.4028/www.scientific.net/AMR.214.144
Experimental Study on Effects of Steel Fiber Volume on Mechanical Properties of SFRC
Farnoud Rahimi Mansour (2011)
10.1007/978-90-481-9664-7_34
Fiber-Reinforced Cementitious Materials: From Intrinsic Isotropic Behavior to Fiber Alignment
Laetitia Martinie (2010)
10.1617/S11527-014-0521-2
Assessment of fibre content and 3D profile in cylindrical SFRC specimens
Sergio H. Pialarissi Cavalaro (2016)
EFFECTS OF DIFFERENT TYPES AND DOSAGES OF FIBRES ON THE LONG – TERM BEHAVIOUR OF FIBRE – REINFORCED SELF – COMPACTING CONCRETE
Nicola Buratti (2012)
See more
Semantic Scholar Logo Some data provided by SemanticScholar