Online citations, reference lists, and bibliographies.

Hydrometallurgically Generated Nanostructured Lead (II) Oxide From Depleted Lead-acid Batteries For Potential Reuse In Next Generation Electrochemical Systems

Robert Chi Yung Liu
Published 2017 · Materials Science
Cite This
Download PDF
Analyze on Scholarcy
Share
................................................................................................................... iii
This paper references
10.1002/14356007.b06_001.pub2
Thermal Analysis and Calorimetry
Stephen Warrington (2008)
10.1016/0378-7753(89)85018-9
The role of tetrabasic lead sulphate in the lead/acid positive plate
B. Culpin (1989)
10.1016/0378-7753(89)80096-5
Technical and research aspects of lead/acid battery production
W. F. Gillian (1989)
10.1016/0304-386X(92)90044-Z
The conversion of lead sulphate to lead carbonate in sodium carbonate media
Yong-kuan Gong (1992)
10.1016/0378-7753(90)80085-R
Advanced lead/acid batteries for stand-alone power-supply systems
Anthony F Hollenkamp (1990)
10.1103/PhysRev.56.978
The Scherrer Formula for X-Ray Particle Size Determination
Adelaide Patterson (1939)
10.1016/S0378-7753(98)00247-X
A high performance lead-acid battery for EV applications
David R Battlebury (1999)
Thermal decomposition of lead citrate. Journal of the Chemical Society, Faraday Transactions 1: Physical Chemistry in Condensed Phases
ME Brown (1973)
Adsorption by Powders and Porous Solids: Principles, Methodology and Applications
Françoise Rouquerol (1998)
10.1016/j.poly.2009.04.009
Preparation of PbO nanocrystals via decomposition of lead oxalate
Masoud Salavati-Niasari (2009)
The Encyclopedia of Alternative Energy and Sustainable Living
D Darling (2010)
10.1016/0378-7753(94)02152-S
A theory of the grid/positive active-mass (PAM) interface and possible methods to improve PAM utilization and cycle life of lead/acid batteries
Detchko Pavlov (1995)
10.1016/S0378-7753(02)00532-3
The influence of different negative expanders on the performance of VRLA batteries
Jesús Valenciano (2003)
10.1111/j.1151-2916.1957.tb12597.x
Thermal Decomposition of Lead Carbonate
E. A. Peretti (1957)
10.1016/0360-1285(85)90004-8
Modeling of smoldering combustion propagation
Thomas J. Ohlemiller (1985)
10.1016/J.JPOWSOUR.2014.07.007
Lead acetate trihydrate precursor route to synthesize novel ultrafine lead oxide from spent lead acid battery pastes
Xiaojuan Sun (2014)
10.1016/S0378-7753(99)00398-5
Desulphurization of the damped lead battery paste with potassium carbonate
Veneta P. Yanakieva (2000)
10.1016/j.hydromet.2008.04.012
Leaching of waste battery paste components. Part 1: Lead citrate synthesis from PbO and PbO2
M. Seref Sonmez (2009)
Electrode Potentials: University of Oxford Press
R G Compton (1996)
10.1021/j100877a023
The Reaction of Pyrophoric Lead with Oxygen
J. Charles (1966)
10.1201/9781439807842.ch10
고분자를 위한 Cyclic Voltammetry
고장면 (1999)
10.2172/837669
Solubility of Litharge (α-PbO) in Alkaline Media at Elevated Temperatures
S. E. Ziemniak (2004)
10.1016/J.SUPFLU.2014.02.022
Hydrothermal synthesis of metal nanoparticles using glycerol as a reducing agent
M. S. Kim (2014)
10.1016/j.jhazmat.2011.07.050
Elecrokinetic separation of sulphate and lead from sludge of spent lead acid battery.
Sundaram Maruthamuthu (2011)
Electrode Dynamics: University of Oxford Press
A C Fisher (1996)
10.1016/S0020-1693(99)00339-4
Lead–citrate chemistry. Synthesis, spectroscopic and structural studies of a novel lead(II)–citrate aqueous complex
M. Kourgiantakis (2000)
10.1016/S0378-7753(02)00700-0
Lead−acid battery research and development—a vital key to winning new business
Kathryn R. Bullock (2003)
10.1016/0378-7753(90)80071-K
Lead/acid battery positive plates manufactured from 4PbO·PbSO4 pastes prepared from leady oxide and red lead
D. Pavlov (1990)
10.1039/9781847552228-00100
Lead-Acid Batteries
Chaz Miller (2006)
10.1016/B978-0-444-53882-6.00005-X
Chapter 4 – Catalytic Activation and Conversion of Carbon Dioxide into Fuels/Value-Added Chemicals Through CC Bond Formation
An-hua Liu (2013)
Estimating Crystallite Size Using XRD Boston: MIT
S A Speakman
Hand Book of Batteries
D Linden
10.1180/minmag.1997.061.405.14
Electron Microprobe Analysis and Scanning Electron Microscopy in Geology
Philip J. Potts (1997)
10.1016/0010-2180(83)90027-5
An experimental comparison of forward and reverse smolder propagation in permeable fuel beds
Thomas J. Ohlemiller (1983)
10.1016/S0378-7753(99)00029-4
Lead-acid batteries with polymer-structured electrodes for electric-vehicle applications
Marina Lara Sória (1999)
10.1016/S0378-7753(99)00014-2
Electrodeposited, dispersion-hardened, lightweight grids for lead–acid batteries
Gerhard Barkleit (1999)
10.1016/0378-7753(93)80159-M
Lead/acid battery recycling and the new Isasmelt process
K. Ramus (1993)
10.1016/S0378-7753(02)00006-X
Spray pyrolysis as a method for preparing PbO coatings amenable to use in lead-acid batteries
Manuel Cruz (2002)
10.1016/j.jpowsour.2003.09.004
Systems for 42 V mass-market automobiles
Thomas A. Keim (2004)
10.1016/J.ELECOM.2012.03.028
A new process of lead recovery from waste lead-acid batteries by electrolysis of alkaline lead oxide solution
Junqing Pan (2012)
10.1016/S0378-7753(96)02515-3
Effects of carbon in negative plates on cycle-life performance of valve-regulated lead/acid batteries
Masaaki Shiomi (1997)
THE LEAD CITRATE COMPLEX ION AND ITS RÔLE IN THE PHYSIOLOGY AND THERAPY OF LEAD POISONING
Seymour S. Kety (1942)
10.1098/rspa.1938.0079
The measurement of particle size by the X-ray method
Frederic Wood Jones (1938)
10.1016/j.jpowsour.2003.12.034
Changes in the demands on automotive batteries require changes in battery design
Patrick Timothy Moseley (2004)
10.1016/0022-1902(65)80049-5
The preparation of ultra pure lead oxide
W. Kwestroo (1965)
10.1016/j.jpowsour.2008.12.140
The lead and lead-acid battery industries during 2002 and 2007 in China
H. Y. Chen (2009)
10.1021/es9805270
Microchemical Investigations of Dust Emitted by a Lead Smelter
Sophie Sobanska (1999)
10.1016/j.jpowsour.2005.07.042
Studies on electrolyte formulations to improve life of lead acid batteries working under partial state of charge conditions
Juan Carlos Catalina Hernández (2006)
High-performance inverted polymer solar cells with lead monoxidemodified indium tin oxides as the cathode. Organic Electronics: physics, materials, applications
H Zhang (2011)
Using Glycerol under Microwave Irradiation Conditions
PD Vaidya (2013)
10.1016/0378-7753(93)80140-K
Calculation of potential distribution and voltage drop at electrodes on high-rate discharge: literature survey and computer-aided approach
Eberhard Dr. Dipl.-Phys. Meißner (1993)
10.1016/S0378-7753(99)00520-0
Environmentally sound technologies for recycling secondary lead
Derek Andrews (2000)
10.1016/S0378-7753(97)02602-5
Opportunities for cost reduction and improved environmental impact in the lead and lead/acid battery industries
Niko Lewis (1997)
10.3133/CIR1196
Flow studies for recycling metal commodities in the United States
Scott F. Sibley (2011)
10.1016/0378-7753(93)80038-Q
Aspects of lead/acid battery technology 7. Separators
L R Prout (1993)
10.1016/S0926-860X(96)00418-8
CO adsorption on supported Pd catalysts studied by adsorption microcalorimetry and temperature programmed desorption
Holger Dropsch (1997)
10.1016/0304-386X(92)90117-I
THE REACTION OF ANGLESITE (PBSO4) CRYSTALS WITH SODIUM-CARBONATE SOLUTIONS
Yong-kuan Gong (1992)
10.1016/j.jpowsour.2008.08.084
Consequences of including carbon in the negative plates of Valve-regulated Lead–Acid batteries exposed to high-rate partial-state-of-charge operation
Patrick T. Moseley (2009)
10.1016/S0378-7753(99)00017-8
Changes in the structure of active materials in lead–acid batteries
Q Dengke (1999)
10.1016/S0378-7753(99)00390-0
Investigation on soaking and formation of lead/acid battery plates with different mass structure
Ilona Dreier (2000)
10.1016/J.MATLET.2010.01.017
Synthesis of PbO nano-particles from a new one-dimensional lead(II) coordination polymer precursor
Homa Sadeghzadeh (2010)
10.1016/j.micromeso.2008.06.010
On the estimation of average crystallite size of zeolites from the Scherrer equation: A critical evaluation of its application to zeolites with one-dimensional pore systems
Allen W. Burton (2009)
10.1016/j.jpowsour.2005.11.022
Significance of carbon additive in negative lead-acid battery electrodes
Milan Calabek (2006)
10.1021/ja01184a034
The Determination of Pore Size Distribution from Gas Adsorption Data
C. G. Schull (1948)
10.1002/jps.20613
Equilibrium versus kinetic measurements of aqueous solubility, and the ability of compounds to supersaturate in solution--a validation study.
Karl J. Box (2006)
10.1021/CM502317G
Tetragonal–Orthorhombic–Cubic Phase Transitions in Ag2Se Nanocrystals
Junli Wang (2014)
10.1016/0378-7753(92)80051-C
Gelled-electrolyte lead/acid batteries for stationary and traction applications
Gregory J. May (1992)
10.1039/b926176a
Colloidal synthesis of lead oxide nanocrystals for photovoltaics.
Christopher A Cattley (2010)
10.1039/F19736901202
Thermal decomposition of lead citrate
Michael E. Brown (1973)
10.1016/j.materresbull.2007.11.014
Synthesis of uniform nano-structured lead oxide by sonochemical method and its application as cathode and anode of lead-acid batteries
Hassan Karami (2008)
Estimating Crystallite Size Using XRD Boston: MIT; Available from: http://prism.mit.edu/xray
SA Speakman (2012)
10.1016/0378-7753(93)85011-C
Aspects of lead/acid battery technology 3. Plate curing
L R Prout (1993)
10.1007/BF01909627
Kinetics and mechanism of thermal decomposition of lead carbonate
Živan D. Živković (1979)
10.1016/0378-7753(94)80062-6
Aspects of lead/acid battery technology 8. Battery oxide
L R Prout (1994)
10.1002/JCTB.4620
Structural study of a lead (II) organic complex – a key precursor in a green recovery route for spent lead-acid battery paste
Wenbo Zhang (2016)
10.1021/SC400007P
Green Synthesis of Noble Nanometals (Au, Pt, Pd) Using Glycerol under Microwave Irradiation Conditions
Jiahui Kou (2013)
10.1016/0032-3861(80)90250-5
An empirical estimation of Scherrer parameters for the evaluation of true crystallite size in fibrous polymers
A. M. Hindeleh (1980)
10.1016/0022-1902(72)80068-x
On the complex formation between lead(II) and tartrate ions in alkaline solution
Emilio Bottari (1972)
10.1016/S1573-4374(03)80009-2
Handbook of Thermal Analysis and Calorimetry
Patrick K. Gallagher (2003)
10.1016/j.hydromet.2008.04.019
Leaching of waste battery paste components. Part 2: Leaching and desulphurisation of PbSO4 by citric acid and sodium citrate solution
M. Seref Sonmez (2009)
10.1016/j.resconrec.2007.05.004
Technological improvements in automotive battery recycling
Marie Kreusch (2007)
10.1134/S0020168506100098
Synthesis and properties of lead oxide carbonate
Seyed Ali Akbar Sajadi (2006)
Secondary Batteries -High Temperature Systems | Flooded Batteries. Encyclopedia of Electrochemical Power Sources
R Wagner (2009)
10.1016/0378-7753(85)80087-2
A study of the phase composition, crystallinity, morphology, porosity and surface area of leady oxides used in lead/acid battery plates
Gary L. Corino (1985)
10.1016/0378-7753(96)02323-3
Lead/acid battery technology
J. E. Manders (1996)
10.1016/S0378-7753(99)00022-1
Constant and pulse power capabilities of lead-acid batteries made with thin metal film (TMF®) for different applications
R. C. Bhardwaj (1999)
10.1002/chin.199013014
Lead-Acid Battery Pastes Containing 4 PbO·PbSO4 and Pb3O4.
D. Ya. Pavlov (1990)
10.1007/s10973-007-8844-7
Conventional and controlled rate thermal analysis of nesquehonite Mg(HCO3)(OH)·2(H2O)
Veronika Vágvölgyi (2008)
10.1016/j.jpowsour.2004.09.018
Porosity measurements of electrodes used in lead-acid batteries
Ernst Ferg (2005)
Understanding Voltammetry: University Oxford Press
R G Compton
10.1016/0022-1902(73)80199-X
On the complex formation between lead(II) and citrate ions in acid solution
Emilio Bottari (1972)
10.1016/j.jpowsour.2004.10.034
Development of a high-performance lead–acid battery for new-generation vehicles
Allan Cooper (2005)
10.1016/J.RSER.2015.03.020
The formation of a series of carbonates from carbon dioxide: Capturing and utilisation
Wan Nor Roslam Wan Isahak (2015)
10.1016/J.MATLET.2011.12.027
Thermally deposited lead oxides for thin film photovoltaics
Laura Melanie Droessler (2012)
10.1039/C3GC36908K
An unprecedented use for glycerol: chemoselective reducing agent for sulfoxides
Nuria Garcia (2013)
10.1023/A:1012737410052
Effect of Lead(II) Complexation on Solubility of β-PbO in Alkaline Solutions in the Presence of Certain Alcohols
V. P. Yurkinskii (2001)
10.1016/0378-7753(94)01993-6
A new high-rate, fast-charge lead/acid battery
Tristan Dieter Juergens (1995)
Lead-Acid Batteries: Science and Technology. A handbook of lead-acid battery technology and its influence on the product
D Pavlov (2011)
10.1016/S0378-7753(98)00021-4
Improved oxides for production of lead/acid battery plates
David P. Boden (1998)
10.1016/S0378-7753(96)02436-6
The use of HgHg2SO4 reference electrodes in valve-regulated lead/acid cells
Michael K. Carpente (1996)
CRC Handbook of Chemistry and Physics
David R. Lide (1996)
Elements Of X Ray Diffraction
Tanja Neumann (2016)
10.1016/0021-8502(72)90158-9
The Kelvin equation—a review
L. M. Skinner (1972)
10.1016/j.jpowsour.2008.11.066
Influence of some metal ions on the structure and properties of doped β-PbO2
N. Chahmana (2009)
10.1016/0378-7753(89)80082-5
Resistance of expanded grids and high-rate plate performance: preliminary results
Eugene M L Valeriote (1989)
10.1023/B:CESW.0000007687.99660.9f
Anomalous Phase Transition in Shock‐Compressed PbO
Sergey M. Gavrilkin (2003)
Characterization of powder surfaces: With special reference to pigments and fillers
Geoffrey D. Parfitt (1976)
Understanding Voltammetry: University
RG 104.Compton (1996)
Developments in Catalysis
WNR Wan Isahak (2013)
10.1021/ja01269a023
Adsorption of Gases in Multimolecular Layers
Stephen Brunauer (1938)
Elemental mapping of minerals by electron microprobe
W. hNsnu (2007)
10.1016/j.jpowsour.2006.02.031
The role of carbon in valve-regulated lead–acid battery technology
Patrick T. Moseley (2006)
10.1180/002646100549896
Crystal chemistry of basic lead carbonates. III. Crystal structures of Pb3O2(CO3) and NaPb2(OH)(CO3)2
Sergey V Krivovichev (2000)
10.1016/0378-7753(96)02296-3
Leady oxide for lead/acid battery positive plates: scope for improvement?
Michael A. Mayer (1996)
10.1071/ch9620040
The Kinetics of the Reduction of Lead Monoxide by Hydrogen
R. V. Culver (1962)
10.1016/j.jhazmat.2013.02.018
Leaching of spent lead acid battery paste components by sodium citrate and acetic acid.
Xinfeng Zhu (2013)
10.1016/j.jpowsour.2008.11.120
New lead-acid battery for submersible vehicles
Yu Ye Kamenev (2009)
10.1016/j.scriptamat.2009.04.021
Lead dioxide coated hollow glass microspheres as conductive additives for lead acid batteries
Simon D. McAllister (2009)
Preparation of ultrafine PbO powders from lead paste in spent lead acid battery
Yang Jia-kuan (2010)
10.1016/j.jeurceramsoc.2009.02.012
Crystal structure and orthorhombic–tetragonal phase transition of nanoscale (Li0.06Na0.47K0.47)NbO3
Chao Wang (2009)
Chapter 4 - Thermogravimetry and Thermomagnetometry
PK Gallagher (2016)
Synthesis of High-Purity alpha-and beta-PbO and Possible Applications toSynthesis and Processing of Other Lead Oxide Materials
Dale L. Perry (2007)
10.3791/54029
Experimental Methodology for Estimation of Local Heat Fluxes and Burning Rates in Steady Laminar Boundary Layer Diffusion Flames
Ajay Veer Singh (2016)
10.1016/S0378-7753(97)02497-X
The tin effect in lead-calcium alloys
Nhan Bui (1997)
10.1016/0378-7753(93)85009-D
Aspects of lead/acid battery technology I. Pastes and paste mixing
L R Prout (1993)
10.1016/J.JCRYSGRO.2011.03.033
Stabilities of crystal faces of aragonite-type strontianite (SrCO3) and cerussite (PbCO3) compared by AFM observation of facet formation in acid
Yusuke Shirota (2011)
10.1007/s10854-015-2815-8
Effects of pH on the crystal structure, morphology and microwave dielectric properties of Bi12TiO20 ceramics synthesized by citrate sol–gel method
Yangyang Zhang (2015)
10.1002/j.1538-7305.1970.tb01829.x
Lead-acid battery: Tetrabasic lead sulfate as a paste material for positive plates
R. V. Biagetti (1970)
10.1016/S0378-7753(99)00012-9
Synthetic fibre reinforcement of absorptive glass-mat separators for valve-regulated lead–acid batteries
R. Simarro (1999)
10.1063/1.112697
Simple electrochemical method for the preparation of a highly oriented and highly photoactive α‐PbO film
P. Veluchamy (1994)
10.1016/J.ELECTACTA.2015.01.019
Electrochemical Synthesis of PbO2, Pb3O4 and PbO Films on a Transparent Conducting Substrate
Christopher G. Poll (2015)
Electron Microprobe Analysis and Scanning Electron Microscopy in Geology. Cambridge, Second Edition
Sjb Reed (2005)
Carbon dioxide as chemical feedstock [electronic resource
M Aresta
10.1002/JCTB.3772
Combustion synthesis of PbO from lead carboxylate precursors relevant to developing a new method for recovering components from spent lead–acid batteries
Jiakuan Yang (2012)
10.1021/j100871a019
Kinetics of the reaction of some pyrophoric metals with oxygen
Thomas M. Gorrie (1967)
10.1063/1.555628
The Solubility of Some Sparingly Soluble Lead Salts: An Evaluation of the Solubility in Water and Aqueous Electrolyte Solution,
H. Lawrence Clever (1980)
10.1351/pac198557040603
Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984)
Kenneth S. W. Sing (1985)
10.1016/S0016-7037(99)00091-5
An explanation of the effect of seawater carbonate concentration on foraminiferal oxygen isotopes
Richard E. Zeebe (1999)
10.1021/cm0101069
Gas Adsorption Characterization of Ordered Organic−Inorganic Nanocomposite Materials
Michal Kruk (2001)
10.3133/ofr01170
Lead recycling in the United States in 1998
Gerald R. Smith (2001)
10.1016/S0378-7753(02)00716-4
The VRLA modular wound design for 42 V mild hybrid systems
Fernando L. Trinidad (2003)
10.1016/S0304-386X(02)00087-7
Lead recovery from a typical Brazilian sludge of exhausted lead-acid batteries using an electrohydrometallurgical process
Luiz Carlos Ferracin (2002)
10.1016/S0378-7753(00)00390-6
Preparation of leady oxide for lead-acid battery by cementation reaction
Jin Ha Shin (2000)
10.1016/j.drudis.2006.09.002
Solubility: it's not just for physical chemists.
Shobha N. Bhattachar (2006)
10.1016/S0378-7753(99)00021-X
Lead–acid technology: a look to possible future achievements
R. David Prengaman (1999)
10.1016/0378-7753(94)01983-3
Failure modes of valve-regulated lead/acid batteries in different applications
Rainer Dr Wagner (1995)
10.1007/S10800-009-0007-Z
A new look at determining acid absorption of lead oxide used in the manufacturing of Pb-acid batteries
Ernst Ferg (2010)
10.1016/j.jpowsour.2008.12.066
The influence of formation conditions on the electrochemical behavior of lead oxide in sulfuric acid solution
L. A. Yolshina (2009)
10.1016/0378-7753(94)02153-T
Passivation and corrosion phenomena on lead-calcium-tin alloys of lead/acid battery positive electrodes
R. Miraglio (1995)
10.1016/0022-3697(96)80009-6
Time resolved XAS study of a phase transition: The polymorphic transformation of tetragonal to orthorhombic PbO
Ludovic Douillard (1996)
10.1016/0304-386X(84)90047-1
Leaching of lead sulphate in sodium carbonate solution
K. Arai (1984)
Development of high power VRLA batteries using novel materials and processes
M. A. López-Montenegro Soriaa (2003)
10.1016/J.JPOWSOUR.2014.01.091
A novel ultrafine leady oxide prepared from spent lead pastes for application as cathode of lead acid battery
Danni Yang (2014)
10.1016/J.PSS.2012.11.005
Gas-solid carbonation as a possible source of carbonates in cold planetary environments
A. Garenne (2013)
10.1016/J.HYDROMET.2012.01.006
Preparation of basic lead oxide from spent lead acid battery paste via chemical conversion
Xinfeng Zhu (2012)
10.1016/J.ORGEL.2011.07.023
High-performance inverted polymer solar cells with lead monoxide-modified indium tin oxides as the cathode
Hong-mei Zhang (2011)
10.1016/0010-2180(90)90030-U
Smoldering combustion propagation through a permeable horizontal fuel layer
Thomas J. Ohlemiller (1990)
10.1002/ceat.200900120
Glycerol Reforming for Hydrogen Production: A Review
Prakash D. Vaidya (2009)
10.1021/ja01145a126
(CONTRIBUTION FROM THE MULTIPLE FELLOWSHIP OF BAUGH AND SONS COMPANY, MELLOX INSTITUTE) The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms
Elliott P. Barrett (1951)
10.1016/j.jpowsour.2007.06.014
Desulphurization of damped battery paste by sodium carbonate and sodium hydroxide
Nedialko K. Lyakov (2007)
10.1016/j.scitotenv.2008.07.043
An exploratory study of lead recovery in lead-acid battery lifecycle in US market: an evidence-based approach.
Ash M. Genaidy (2008)
10.1016/j.matchemphys.2007.09.045
Synthesis of lead oxide nanoparticles by Sonochemical method and its application as cathode and anode of lead-acid batteries
Hasan Karami (2008)
10.1180/002646100550065
Crystal chemistry of basic lead carbonates. I. Crystal structure of synthetic shannonite, Pb2O(CO3)
Sergey V Krivovichev (2000)
10.1016/S0925-8388(01)01467-0
Electrochemical performance of nanocrystalline lead oxide in VRLA batteries
Jia Wang (2001)
10.1016/j.jpowsour.2004.11.046
High-power lead–acid batteries for different applications
Rainer Wagner (2005)
Lead-acid battery pastes containing 4PbO · PbSO4 and Pb3O4. Journal of the Electrochemical Society
D Pavlov (1990)
10.1016/0021-9517(64)90092-2
Pore distributions from desorption isotherms
Robert B. Anderson (1964)
10.1016/j.ejps.2012.07.019
Optimizing solubility: kinetic versus thermodynamic solubility temptations and risks.
Christoph Saal (2012)
10.1016/J.JPOWSOUR.2009.12.118
The refining of secondary lead for use in advanced lead-acid batteries
Timothy W. Ellis (2010)
Overview of Lead Scale Formation and Solubility
J. Barry Maynard (2010)
10.1016/0304-386X(94)00081-D
The mineralogical characterization of lead-acid battery paste
Tony T Chen (1996)
Introduction to X-Ray Powder Diffraction
R Jenkins (1996)
Chapter 12 -Thermal Analysis A2 -Inagaki, Michio
M-M Chen (2016)
10.1063/1.1708890
Photoconductivity in Tetragonal and Orthorhombic Lead Monoxide Layers
John C. Schottmiller (1966)
10.1016/J.JCOU.2013.06.002
Adsorption-desorption of CO2 on different type of copper oxides surfaces: Physical and chemical attractions studies
Wan Nor Roslam Wan Isahak (2013)
10.1016/j.epsl.2005.03.006
The role of the global carbonate cycle in the regulation and evolution of the Earth system
Andy Ridgwell (2005)
10.1021/ed079p944
Holleman-Wiberg's Inorganic Chemistry (edited by Wiberg, Nils)
William B. Jensen (2002)
10.1016/J.MATERRESBULL.2013.01.031
Lead citrate precursor route to synthesize nanostructural lead oxide from spent lead acid battery paste
Lei Li (2013)
10.3390/APP3010055
Glycerol: A promising Green Solvent and Reducing Agent for Metal-Catalyzed Transfer Hydrogenation Reactions and Nanoparticles Formation
Alba E. Díaz-Álvarez (2013)
10.1016/j.jhazmat.2011.12.021
Preparation and characterization of nano-structured lead oxide from spent lead acid battery paste.
Lanlan Li (2012)



Semantic Scholar Logo Some data provided by SemanticScholar