Online citations, reference lists, and bibliographies.

Quantitative Characterization Of Micro-topography A Bibliography Of Industrial Surface Metrology

Roger John Pike, Tom R. Thomas
Published 1998 · Engineering
Cite This
Download PDF
Analyze on Scholarcy
Share
3
This paper references
10.1016/0030-4018(81)90337-0
Determination of roughness of LiF films using guided light modes
D. L. Hornauer (1981)
10.1080/00207547508942997
Surface roughness: the measurement of spark erosion reference standards
J. Koning (1975)
10.1016/0039-6028(93)90770-K
Surface light-induced drift as a tool for studying gas-surface interactions
Michael A. Vaksman (1993)
10.1243/PIME_PROC_1993_207_060_02
Surface Roughness Model for Turning Grey Cast Iron (154 BHN)
Mohie El Baradie (1993)
10.1520/JTE11850J
Objective Evaluation of Surface Characteristics to Determine Smoothness of Pile Fabrics
Jo Ajayi (1994)
10.1117/12.198860
Inspecting wood surface roughness using computer vision
Xuezeng Zhao (1995)
10.1002/(SICI)1096-9918(199607)24:7<469::AID-SIA140>3.0.CO;2-U
SIMS Depth Profiling of Delta‐doped Layers in Silicon
Valery Konstantinovich Smirnov (1996)
10.1504/IJVD.1995.061919
Nonstationary random response of a vehicle with a varying structure
Unyime O. Akpan (1995)
10.1088/0957-0233/3/8/011
Statistical analysis of optical Fourier transform patterns for surface texture assessment
Lawrence. Cuthbert (1992)
10.1007/BF00362152
Scanning tunnelling microscopy studies of nucleation and growth of silver films
M.R.K. Rao (1995)
10.1016/0038-1098(93)90660-F
Thin film conductivity, impurities and surface roughness
Chr. Kunze (1993)
Novel Technique for Monitoring Surface Finishes: Proc.of the Int.Conf. on Prod.Eng
K. G. Keeping (1977)
Antigenantibody diffusion-limited binding kinetics of biosensors, a fractal analysis: Biosensors
Sadana (1995)
Interface tests to investigate pile skin friction in sands: Research Report - University of Sydney
J. T. Tabucanon (1992)
The analysis and presentation of multi-trace data, and some applications in industrial research: Surface Topography
S. J. Radcliffe (1988)
10.1364/AO.34.000201
Calculation of the power spectral density from surface profile data.
James Merle Elson (1995)
Optical methods for surface finish evaluation
H. von Weingraber (1963)
10.1016/0043-1648(95)06609-8
Experimental investigation of the superfinishing process
Keiji Nakayama (1995)
10.1243/PIME_CONF_1967_182_336_02
Paper 32: Accurate Calibration of Surface Texture and Roundness Measuring Instruments
Robert C. Spragg (1967)
10.1016/0304-8853(95)00292-8
Letter to the Editor Dipolar interaction and its interplay with interface roughness
Dora Altbir (1995)
Application of vertical scanning interferometric profiler to paper surface
Teruo Yamauchi (1996)
10.1016/0960-1481(96)88401-1
Wind mapping of a region in the north-east of Algeria
K. Abdeladim (1996)
10.1016/1044-5803(93)90075-7
Surface roughness of anisotropic fracture surfaces
Arun M. Gokhale (1993)
10.1016/0017-9310(94)90094-9
Local heat transfer in a rotating serpentine passage with rib-roughened surfaces
Fann Shin (1994)
10.1016/0039-6028(96)00197-5
Structural and doping properties of molecular beam epitaxy-grown Si-doped GaAs(001) surfaces
Shangjr Gwo (1996)
10.1016/0141-6359(81)90045-3
Assessment of surface roughness parameters and their interdependence
O. A. Gorlenko (1981)
10.1115/1.3251544
An Evaluation of the Average Flow Model [1] for Surface Roughness Effects in Lubrication
Jennifer Teale (1980)
Advantages and Industrial Applications of Three-Dimensional Surface Roughness Analysis
L Dechiffre (1994)
10.1364/JOSA.73.000222
Autocovariance functions for polished optical surfaces
Georges Rasigni (1983)
10.1021/jp982910x
In Situ Monitoring of the NaCl + HNO3 Surface Reaction: The Observation of Mobile Surface Strings
Christopher D. Zangmeister (1998)
10.1115/1.3261237
High-Speed Noncontact Profiling of Pavement Surface Texture and Its Significance
James C. Wambold (1986)
10.1007/BF02325587
Development of a test machine and method for galling studies
Arif Ertas (1992)
Statistical Analysis of Roughness on Contact Surfaces (I)
Shigeru Hoyashita (1986)
10.1002/sia.740050203
Ion sputtering in the surface analysis of practical surfaces
M. Keenlyside (1983)
10.1007/BF00246950
Hydrogen evolution reaction on Ni-Al electrodes
Przemyslaw Los (1993)
Subcooled flow boiling CHF at high liquid velocity: Institution of Chemical Engineers Symposium Series v. 1 no. 129
Cumo (1992)
Effects of the microgeometry of surfaces on lubrication.l
N. Tipei (1963)
Surface roughness profiles and coatings performance
C. M. Hansen (1972)
10.1016/0043-1648(93)90462-U
Characterization of the shape of the roughness profile ordinate distribution of honed cylinder surfaces
Jacek Michalski (1993)
A model of friction for elastic plastic contact: Trenie i Iznos v
N. B. Demkin (1994)
Model for the transport and deposition of particles in rivers: Measurement and Modeling of Environmental Flows
S. M. Fitzpatrick (1992)
Non-contact precision measuring system: Hongwai/lnfrared
Gao (1993)
lubrication of solids. Part 2: Oxford University Press, U.K. 544p
P. E. D'yachenko (1964)
Power density development, The role of improved line contact performance: Am
C. A. Moyer (1989)
Sources of error in Surface Texture Measurement: SME
F. W. Witzke (1976)
10.1016/0043-1648(86)90045-1
Comparison of models for the contact of rough surfaces
John I. McCool (1986)
Roughness of the chromium coatings formed in the low-concentrated electrolytes with the organic additives
A. I. Falicheva (1994)
10.1088/0022-3735/10/2/015
Some theoretical aspects of the measurement of curved surfaces
Michael J. Phillips (1977)
10.1524/teme.1986.53.jg.40
Messung der Neigungsstreuung an rauhen Oberflächen / Measurement of the rms slope of rough surfaces
Martin Grabe (1986)
10.1016/0043-1648(75)90147-7
Significance of grit morphology in fine abrasion
S. K. Dean (1975)
10.1115/1.3438536
Profile Characterization of Manufactured Surfaces Using Random Function Excursion Technique, Part 2: Application
M. O. M. Osman (1975)
10.1109/NTC.1994.316684
Road surface classification by using a polarimetric coherent radar module at millimeter waves
Norbert Kees (1994)
10.7567/JJAPS.14S1.293
Surface Roughness Measurement by Using Speckle Pattern
Junji Ohtsubo (1975)
10.1016/0043-1648(94)06570-5
Deterministic modeling and numerical simulation of lubrication between rough surfaces—a review of recent developments
Liming Chang (1995)
10.1016/0039-6028(95)00460-2
In situ electrochemical STM imaging of roughened gold and platinum electrode surfaces
Norbert Breuer (1995)
10.1109/INTMAG.1992.696585
Thin film disks with transient metal underlayers
M. Mirzamaani (1992)
10.1117/12.22807
Robust, angstrom level circularity profilometry
Paul E. Glenn (1990)
10.1109/APS.1985.1149431
Scattering of Hermite-Gaussian beams from an irregular surface
Takehiro Kojima (1985)
10.1016/0890-6955(94)90038-8
Light scattering patterns of simulated engineering surfaces when the surfaces have a sinusoidal waviness
D. Y. Yim (1994)
10.1017/S0001924000059595
DRAINAGE CRITERIA FOR RUNWAY SURFACE ROUGHNESS
Desmond F. Moore (1965)
10.1016/0141-6359(94)90233-x
Handbook of Surface Metrology
David J. Whitehouse (1994)
10.1088/0022-3727/25/1A/038
The classification of rough surfce contacts in relation to tribology
Chin Y. Poon (1992)
10.1016/0030-4018(81)90305-9
Surface studies of absorbing thin solid films
Himadri B. Bohidar (1981)
10.2166/wst.1996.0210
Development of design methodology for self-cleansing sewers
Richard May (1996)
10.1115/1.3254944
Contact Stress Between Rollers With Surface Irregularity
Aizoh Kubo (1981)
10.1016/0169-4332(95)00566-8
Pulsed laser deposition of nasicon thin films
Ricardo Izquierdo (1996)
10.1088/0268-1242/9/5S/139
Fluctuations in the transmission properties of a quantum dot with interface roughness and impurities
Scott Kirby (1994)
10.1016/0257-8972(94)02391-3
Introduction of fractal dimension to adhesive strength evaluation of plasma-sprayed coatings
Shigeyasu Amada (1996)
10.1016/0956-716X(95)00322-M
Deformation-induced surface roughening studies in an AISI 1090 spheroidized steel
Paul Antony Sundaram (1995)
10.1111/j.1151-2916.1993.tb08321.x
Silicon Carbide Platelet/Alumina Composites: III, Toughening Mechanisms
Yeong-Shyung Chou (1993)
X-ray characterization of a SrTiO 3 bicrystal interface
Alexander Kazimirov (1996)
10.1049/ip-h-2.1989.0039
EM wave scattering from statistically inhomogeneous and periodic random rough surfaces
Dimitrios P. Chrissoulidis (1989)
10.1016/0043-1648(95)06697-7
Comparison of surface roughness measurements by stylus profiler, AFM and non-contact optical profiler
Chin Y. Poon (1995)
Average height of rough surface asperities and density of contact spots In the contacting of a rough surface with a smooth surface
N. F. Semenyuk (1986)
Friction surfaces microrelief formation by means of laser radiation
V. S. Avanesov (1995)
Animal study of c.p. titanium screws with different surface topographies: Journal of Materials Science, Materials in Medicine v
A. Wennerberg (1995)
10.1016/0043-1648(79)90108-X
Effect of the surface finish of brake rotors on the performance of brakes
Brittany J. Chapman (1979)
10.1016/0030-4018(93)90584-R
Effect of mechanical polishing on the surface structure of glasses studied by grazing angle neutron reflectometry
Malik Maaza (1993)
Roughness measurements by light scattering techniques
G. W. Thum (1985)
10.1016/S0022-0248(07)80112-6
Direct evidence for melting transition at interface between ice crystal and glass substrate
Yoshinori Furukawa (1993)
Rolling contact bearing surfaces - the current relationship between requirements and processing
S. J. Puckett (1973)
A critical evaluation of surface
C. K. Hsieh (1974)
Fringe-field capacitive profilometry
J. L. Garbini (1988)
Effects of surface roughness on the flexural strength of a hard metal
J. J. Fernandes (1994)
10.1109/55.215171
On the electrical conduction in the interpolysilicon dielectric layers
Cornel Cobianu (1993)
Study of the contact of two rough surfaces
N. B. Demkin (1990)
The nature and topography
J. E. Field (1967)
10.1109/ICSMC.1991.169792
Multisensor integration for underwater scene classification
Sharad Malik (1991)
10.1109/ECTC.1994.367537
Fine line thin dielectric circuit board characterization
Chi Shih Chang (1994)
10.1088/0031-9112/24/10/011
Stylus methods of surface measurement
R. E. Reason (1973)
10.1007/BF00461378
Effect of surface roughness on the room temperature low cycle fatigue life of alloy Nimonic 90
S. Ganesh Sundara Raman (1994)
10.1243/PIME_PROC_1985_199_104_02
The Elastic Contact of Rough Surfaces and its Importance in the Reduction of Wear
John Halling (1985)
10.1016/0038-1098(95)00500-5
Surface composition and ordering of Cu3Pt(111)
Yaogen Shen (1995)
10.1063/1.1143139
Long‐range scanning for scanning tunneling microscopy
Joseph H. G. Fu (1992)
10.1299/jsme1958.19.54
Friction between Hard Rough and Soft Smooth Surfaces
Tadasu Tsukizoe (1976)
10.1149/1.1836895
Protrusion Formation at the Edges of Ion Implanted Regions
Antonio L. P. Rotondaro (1996)
10.1007/BF00817684
New parameter for evaluating the step of the profile's predominant harmonic
T. S. Lopovok (1975)
10.2118/23992-PA
A Correlation for Miscible Flood Displacement Efficiency in the San Andres with NMR Relaxation
R. D. Hazlett (1994)
10.1016/0039-6028(94)00670-9
Surface plasmon polariton radiation from silver films on fluoride films and surface roughness parameters of those silver films
Haruo Tajima (1995)
10.1016/0022-0248(93)90300-L
Fluctuation of steps in a surface diffusion field
Makio Uwaha (1993)
10.1016/1352-2310(94)90325-5
Wind-tunnel studies of roughness effects in gas dispersion
Pc Roberts (1994)
10.1016/0020-7403(95)00038-Y
Hardening laws, surface roughness and biaxial tensile limit strains of sheet aluminium alloys
Mukul Jain (1996)
10.1016/0924-0136(93)90124-O
High quality machining of ceramics
Chisato Tsutsumi (1993)
10.1016/0167-6105(94)90039-6
Pulsed-wire anemometry on rough surfaces, with application to desert sand dunes
I. Penalosa Castro (1994)
10.1016/S0007-8506(07)61363-8
Power Spectra of Rough Surfaces Obtained by Optical Fourier Transformation
E. G. Thwaite (1980)
10.1115/1.2901656
Generation of Milled Surfaces Including Tool Dynamics and Wear
Fathy Ismail (1993)
10.1109/48.289445
Short-wave measurements by a fixed tower-based and a drifting buoy system
Siegfried Stolte (1994)
10.1016/0039-6028(95)00003-8
Thermal roughness of a Si(331) surface
Do Young Noh (1995)
10.1007/BF00356821
Surface roughness and impact strength of injection-moulded polystyrene
Tae Hee Lee (1994)
10.1016/0039-6028(96)00053-2
MOS interface characterization by cross-sectional STM
Tadahiro Komeda (1996)
10.1016/0266-3538(93)90031-B
The mixed-mode delamination of fibre composite materials
Anthony J. Kinloch (1993)
10.1016/0148-9062(78)90007-4
A NEW METHOD FOR THE DETERMINATION OF THE ROUGHNESS OF ROCK JOINTS IN THE LABORATORY
G H Weissbach (1978)
10.1109/MEMSYS.1996.493835
Nanotribology and nanomechanics of MEMS devices
Bharat Bhushan (1996)
10.1080/10402009608983539
Surface Abuse Associated with Finish Turning of Gray Cast Iron with Ceramic Tools
Emmanuel O. Ezugwu (1996)
10.1007/BF00539956
Correlation between phase transformation and surface texture induced by grinding in tetragonal zirconia polycrystals
Hai-yan Zhu (1996)
10.1115/1.3428308
Stylus Tracer Resolution and Surface Damage as Determined by Scanning Electron Microscopy
José Guerrero (1972)
10.1016/0165-1633(91)90035-J
Texture of selective surfaces for photothermal conversion
Adéchion Komla (1991)
10.1557/PROC-367-83
Fractal Properties of Fracture Surfaces: Roughness Indices and Relevant Lengthscales
Elisabeth Bouchaud (1994)
10.1016/0921-4526(95)00120-X
Interfacial roughness and the giant magnetoresistance effect of Fe/Cr multilayers
Masatoshi Takeda (1995)
10.1002/(SICI)1096-9918(199604)24:4<282::AID-SIA112>3.0.CO;2-R
Determination of Fractured Steel Surface Roughness by Atomic Force Microscopy Using Fractal‐based Approaches
Ph. Gollion (1996)
10.1016/0043-1648(92)90153-Y
Friction in deep drawing of aluminium sheet
Jen Fin Lin (1992)
10.1117/12.141943
Coherence radar: an accurate 3D sensor for rough surfaces
Gerd Häusler (1993)
10.1007/BF01098690
Deterministic modelling of indoor radio propagation at 40–60 Ghz
Peter F. M. Smulders (1994)
10.1016/0043-1648(80)90007-1
An equation for the centre-line average roughness of material slid against abrasive paper
Hirofumi Miki (1980)
10.1016/0022-1694(92)90086-B
Evaluating Manning's roughness coefficients for tilled soils
Yusuf M. Mohamoud (1992)
10.1063/1.1714062
Deformation of Surface Asperities During Bulk Plastic Flow
Joseph A. Greenwood (1965)
10.1364/AO.20.003385
Contouring by laser speckle.
G. K. Jaisingh (1981)
10.1021/ma00059a015
Time evolution of the free surface of ultrathin copolymer films
Georges Coulon (1993)
10.1115/1.3261472
Influence of Surface Waviness and Roughness on the Normal Pressure Distribution in the Hertzian Contact
Jorge H.O. Seabra (1987)
10.1016/0043-1648(82)90311-8
The importance of surface characterization in surface treatment processes
D. M. Turley (1982)
10.1016/0304-3991(93)90156-R
Cross-sectional transmission electron microscopy studies of metallic multilayers
A. De Veirman (1993)
10.1115/96-GT-451
Surface Optimisation by Engineering the Stress and Roughness
Peter T. Ohara (1996)
10.1557/PROC-366-247
Adsorption on Rough Surfaces
Ronald A Segars (1994)
10.1016/0043-1648(94)06545-4
Generalized fractal analysis and its applications to engineering surfaces
Suryaprakash Ganti (1995)
10.1007/BF00414277
Environmentally enhanced instability of stressed solids
Boris I. Yakobson (1993)
10.1109/VLSIT.1995.520851
Pressure-controlled two-step TEOS-O/sub 3/ CVD eliminating the base material effect
Masayoshi Saito (1995)
10.1115/1.2901673
Effects of operating parameters on surface quality for laser cutting of mild steel
Roberta Neimeyer (1993)
10.1016/0043-1648(77)90057-6
The spatial representation of surface roughness by means of the structure function: A practical alternative to correlation
Richard S. Sayles (1977)
10.1116/1.587869
Scaling of Si/SiO2 interface roughness
Tatsuo Yoshinobu (1995)
10.1115/1.3261924
A Spectral Approach to the Analysis of Rough Surfaces
H. Moalic (1989)
Measurement of smoothness on optical plane surfaces with an autocollimating telescope and a pentagonal prism: PTB
E. Debler (1980)
10.1016/0043-1648(94)90088-4
The influence of surface roughness and oil viscosity on the transition in mixed lubricated sliding steel contacts
Sören Andersson (1994)
10.1007/BF00872279
Derivation of errors of kinematic-wave and diffusion-wave approximations for space-independent flows
Vijay P. Singh (1994)
10.1016/0043-1648(80)90114-3
The effect of surface topography on the wear of steel
M. A. Shafia (1980)
10.1016/0045-7949(95)00320-7
Stochastic response of a flexible mobile robotic manipulator structure
Unyime O. Akpan (1996)
10.1117/12.130615
Improvement in the synthesis of Ni/Ti neutron mirrors
Alan F. Jankowski (1992)
Deformation caused by stylus tracking on thin gold film
W. B. Estill (1966)
Mesoscale simulation of the arctic ice pack: Ice Mechanics
Hopkins (1993)
Area! measurement of topography
L. R. Baker (1988)
Effect of surface topography on damping in machined joints: 2nd Int.Conf.on Met
Akella (1982)
Influence of oriented growth on the surface roughness of CVD diamond films: Surface & Coatings Technology v
C. Norgard (1995)
Cast surfaces evaluation for roughness standards
E. Swing (1959)
10.1088/0022-3727/5/2/314
On the distribution of asperity heights of surfaces
A. Jackie Hunter (1972)
Modern methods of assessing the quality and function of surface texture: S.M.E
D. J. Whitehouse (1972)
Watching those international surface standards: S.M.E
P. O. Lenz (1975)
10.1016/0043-1648(79)90142-X
A comparison between talysurf 10 and optical measurements of roughness and surface slope
Lawrence H. Tanner (1979)
Hingle: Use of optical diffraction techniques to obtain information about surface finish, tool shape and machine tool condition: Wear, V.109
J. H. Rakels (1986)
Some topographic features of the wear process - theory and experiment
T. G. King (1977)
Prueffung Der Oberflaechen-Rauheit Mit Tastschnitigeraeten. (Surface Roughness Testing with Tracer Cutting Devices)
H. Wolff (1976)
CLEANING STEEL WIRE WITHOUT ACID
Klaus Oehr (1996)
Rubbing and scrubbing (tribology)
Hahner (1998)
A case for the qualitative
H. P. 1944. Jost (1944)
10.1088/0957-0233/3/12/001
Recent developments in surface roughness characterization
J. Michael Bennett (1992)
Exploring surface texture
H. Dagnall (1980)
How real wetting conditions influence hysteresis of the edge angle of drops
V. G. Pppov (1992)
On determination of probability characteristics of composite surface microgeometry: Problemy Prochnosti i Nadezhnos'ti
V. S. Luk'yanov (1992)
Lets clean up the mess in surface
T. Busch (1968)
10.1007/BF00814935
Analysis of methods for filtration of surface waviness
T. S. Lopovok (1974)
10.1016/0304-3991(92)90302-Z
Resolution of the photon scanning tunneling microscope: influence of physical parameters
Frédérique de Fornel (1992)
Nondestructive inspection of surface topography by electrical discharge imaging
Nielsen (1981)
Mixed friction in an elastohydrodynamic system: Symp. on Elastohydrodynamic Lubrication, Leeds, April, 11-13, 1972, organised by the I
J. C. Bell (1972)
10.1016/0043-1648(94)90166-X
Effects of surface roughness and type of oil on traction characteristics between steel rollers
Akira Ishibashi (1994)
A critical survey of surface-finish
H P. (1944)
Use of a microwave backscatter model for retrieving soil moisture over bare soil: International Journal of Remote Sensing v
P. Bertuzzi (1992)
A survey of factors affecting
G. R. Dickinson (1967)
Measurement of the fractal dimension of surfaces
J. C. Russ (1991)
Envelope characteristics of machined surfaces and their functional importance
J. Peklenik (1973)
RELIABILITY ANALYSIS OF DEEP WATER PIPELINES DURING LAYING, FOR COMBINED PRESSURE, TENSION AND BENDING LOADS
Ragnar T. Igland (1993)
Error estimates from the deviation measurements of surface straightness under real conditions
V. V. Leonpv (1989)
10.1016/0921-4534(96)00220-1
Growth process of YBa 2Cu 3O 7- x films prepared by RF thermal plasma evaporation
Tsujino Jiro (1996)
A comparative study of surface
A. F. George (1979)
Evaluating casting finishes
H. H. Fairfield (1950)
The influence of abrasive fillers on the wear properties of PTFE-based composites: Royal Aircraft Estab
D. C. Evans (1976)
10.1007/BF00504436
Correlation and prediction of dense fluid transport coefficients. I. n-alkanes
Marc J. Assael (1992)
Adhesion between metal surfaces
V. Radhakrishnan (1981)
Turbulent boundary layers on rough surfaces with and without a pliable overlayer: ASME/ASCE Bioeng
A. K. Lewkowicz (1981)
10.1115/1.3187097
A Consideration of Surface Roughness Measurement by Optical Method
Minoru Shiraishi (1987)
10.1115/96-GT-203
Measurements and Prediction of the Effects of Surface Roughness on Profile Losses and Deviation in a Turbine Cascade
Richard J. Kind (1996)
10.1007/BF00680260
Fatigue strength of nickel electrodeposits prepared in ultrasonically agitated bath
P. Sathya Sainath Prasad (1994)
10.1016/0010-4485(94)90041-8
Effect of cutter mark on surface roughness and scallop height in sculptured surface machining
B. H. Kim (1994)
10.1016/0890-6955(95)00068-2
An experimental study on grinding of silicon carbide reinforced aluminium alloys
A. Di Ilio (1996)
10.1007/BF00356654
Evaluation of advanced alumina-based ceramic tool inserts when machining high-tensile steel
Xinyong Li (1994)
10.1016/0079-6816(94)90036-1
Crystallization of diamond from gas at the periodic pulse supersaturation
Boris V. Derjaguin (1994)
10.1029/97JB02836
Synthetic rough fractures in rocks
Paul W. J. Glover (1998)
10.1016/0169-4332(93)90487-V
Laser direct-write Al deposition on Si, GaAs and diamond from trialkylamine-alane precursors.
François Foulon (1993)
10.1016/0301-679X(78)90001-4
Some problems in the tribology of rough surfaces
Tom R Thomas (1978)
10.1299/jsme1958.1.329
On the Distribution of Surface Roughness when Two Surfaces Are Pressed Together
Akira Iwaki (1958)
10.1049/jipe:19470036
Surface finish measurement of engineering components
Colin Timms (1947)
10.1002/ppsc.19930100302
Applied Fractal Geometry and the Fineparticle Specialist. Part I: Rugged boundaries and rough surfaces
Brian Howard Kaye (1993)
10.1016/S0007-8506(07)62427-5
Dynamic stability of the technological machining system in EDM
St. Enache (1993)
10.1098/rspa.1989.0101
Evaluating the fractal dimension of surfaces
Benoit Dubuc (1989)
10.1016/0039-6028(95)00061-5
LEED and resonance EELS study of the (NO)2 dimer on graphite
Iris Nandhakumar (1995)
10.1016/0020-7357(79)90003-9
Filtering of surface profiles using fast fourier transform
Jay Raja (1979)
10.1117/12.962828
Optical Measurement Of Roughness On Cylinders With Thick, Refractive Coatings
Wilson M. Routt (1989)
10.1016/0043-1648(82)90108-9
Approximate harmonic models for roundness profiles with equivalent energy mean square values
A. Y. Chien (1982)
10.1115/1.2920900
Simulation of Elastohydrodynamic Contacts Between Rough Surfaces
C. C. Kweh (1992)
10.1002/adma.19940060606
In-situ stress investigations on thin copper films with the STM†
Thomas R. Fries (1994)
Runway Roughness Studies in the Aeronautical Field
John C. Houbolt (1962)
10.1103/PhysRevB.38.9031
Fractal approach in petrology: Small-angle neutron scattering experiments with volcanic rocks.
Lucido (1988)
Measuring and designating
J. A. 1944. Broadston (1944)
Lukianowicz, Cz., Surface Roughness Measurements by Photometric Method
T. Karpinski (1977)
Inherent roughness of a machined surface: SME
Gillibrand (1980)
General Reynolds-type equation for rough surfaces, based on numerical simulation: Surf Roughness Eff in Hydrodyn and Mixed Lubr
K. Tonder (1980)
10.1016/0026-2692(93)90050-O
Dielectric properties of polyoxides for EEPROM
Gregor Fernholz (1993)
Wierzcholski, The influence of sleeve surface roughness on the load-carrying capacity of journal bearings in a magnetic field: Wear
Krause (1982)
Changes of Manning's roughness coefficient with river stages: International Water Resources
Soong (1995)
The topographical characteristics of micro-indentations and their relevance to microhardness testing
P. J. Sullivan (1988)
10.1111/j.2042-7158.1978.tb13252.x
The measurement of the adhesion of film coatings to tablet surfaces: the effect of tablet porosity, surface roughness and film thickness.
Raymond C. Rowe (1978)
Surface roughness sensed by ultrasound
G. V. Blessing (1988)
10.1016/0378-4754(95)00032-1
Simulating models of turbulence and interfaces
Mogens Høgh Jensen (1996)
10.1115/1.3645799
A Theory of Lubrication by Microirregularities
David Boyce Hamilton (1966)
Condensed Matter, v
B Physica (1996)
10.1016/S0007-8506(07)60984-6
Investigations of the Surface Roughness Range
Bogdan Nowicki (1981)
Special measures for thin coatings measurement: Instrumentation in the Aerospace Industry
Tseytlin (1994)
Stancec, Testing of calibration specimen used with stylus instruments for measuring surface roughness
F. Dusman (1985)
Automatic, high-precision flatness testing of large surfaces: Jena Rev
Schuchardt (1981)
Millis, Study of surface topography in impact
P. A. Engel (1982)
Surface roughness and size tolerance
P Herbertosanna (1979)
10.1016/S0007-8506(07)63254-5
Modelling and Simulation of Grinding Processes
Hans Kurt Tönshoff (1992)
10.1016/0043-1648(82)90341-6
The parameter rash — is there a cure?
David J. Whitehouse (1982)
10.1016/0039-6028(96)00216-6
Surface structures of (NH4)2Sx-treated GaAs studied by S K-edge X-ray absorption fine structure
Satoshi Maeyama (1996)
10.13031/2013.25437
Random Roughness Assessment by the Pin and Chain Method
John E. Gilley (1995)
10.1080/09500349514552041
Statistics of rough surfaces via remote sensing An experiment
Josué Álvarez-Borrego (1995)
Optimierung von Strahlprozessen durch Computersimulation
R. Elsing (1991)
10.1016/0030-3992(95)00081-X
Optical testing of hard disks
Michael K Miller (1996)
10.1016/0890-6955(92)90083-S
A stylus instrument for roughness and profile measurement of ultra-fine surfaces
Jeffery David Garratt (1992)
10.13031/2013.28750
A coupled, field hydrology: open channel flow model: theory
Kenneth D. Konyha (1992)
10.1115/1.2831249
Investigation of the Deformation and Damage Sustained by a Wearing Surface in Sliding Metallic Friction
E. M. Kopalinsky (1995)
10.1016/0920-4105(95)00005-3
Foam flow through a transparent rough-walled rock fracture
Anthony R Kovscek (1995)
10.2514/3.735
Effect of spray characteristics on spray cooling with liquid nitrogen
Maninder S. Sehmbey (1994)
10.1364/AO.11.000807
Surface Roughness Measurement by Holographic nterferometry.
W. B. Ribbens (1972)
10.1117/12.172591
Fractal surface and its measurement by computer simulation
Siak Piang Lim (1994)
10.1080/00207219308925881
Equilibrium and space-charge wave analysis of electron beams in conducting and absorbing gyrotron beam tunnels
David Richard Whaley (1993)
10.4271/740201
Triangular Asperities Control Seal Leakage and Lubrication
Dennis Lee Otto (1974)
EFFECT OF COLD WORK AND HEAT TREATING ON THE FORMATION OF BRITTLE ALLOY LAYER DURING HOT DIPPED GALVANIZING
Masoud Molaei (1996)
Hardening of steels and irons by surface passivation and heat treatment: Metallovedenie i Termicheskaya
A. I. Kulikov (1994)
The 3-D representation of engineering surfaces: Surface Topography
W. Eatson (1988)
Investigations of soil moisture 95
K. S. Chen (1998)
Three-dimensional surface-topography assessments using a stylus/computer system: Int
P. W. O'Callaghan (1989)
10.1016/0043-1648(79)90127-3
A study of surface wearing ability in relation to some technological factors II. Effect of the method of surface finishing and running-in
L. Y. Prujanski (1979)
10.1016/0039-6028(93)90586-9
Aluminum deposition on NiO(100): growth, structure and composition of the interface
Syed Imaduddin (1993)
10.1680/gein.3.0061
Geomembrane Microtopography by Atomic Force Microscopy
John E. Dove (1996)
10.1364/AO.25.004349
Effect of surface texture on absorption by lossy dielectric slabs.
Akhlesh Lakhtakia (1986)
10.1080/10402009608983549
Topographic Investigation of the Wear Resistance of PTFE Seals in Sliding Contact with Ceramic Materials
Steen Ledet Christiansen (1996)
10.1016/0304-8853(95)00871-3
Influence of the quantum size effect and interface roughness on the giant magnetoresistance in ultrathin magnetic layered structures
J. Barnas (1996)
10.1016/0378-3839(95)00024-0
Increase of Current Bottom Shear Stress Due to Waves
Zai-jin You (1995)
10.1520/STP14037S
DDW Testing of Thermal Spray Coatings
Df Bowers (1995)
10.1016/0040-6090(95)05849-4
Multivariate estimation of the systematic error of scanning probe microscopes
Hendrik Rothe (1995)
10.1016/0924-0136(93)90196-D
Whole field measurement of surface roughness using laser speckle
Cho Jui Tay (1993)
10.1007/BF00865858
Estimating profilometer errors in measuring roughness parameters
V. Ya. Barash (1987)
10.1007/BF00978898
Interference method of measuring the roughness of a surface
G. Trumpol'd (1971)
LABORATORY SCANNING ACOUSTIC MICROSCOPE
Alexander Lukhvich (1992)
10.1061/(ASCE)0733-9429(1993)119:5(651)
Generalized inner region velocity distribution equation
Prabhata K. Swamee (1993)
10.1016/0043-1648(82)90337-4
Assessment of surface texture from analysis of the signal visibility of a laser Doppler anemometer
David R. Burton (1982)
10.1109/19.492755
Analysis of optical surfaces by means of surface plasmon spectroscopy
Eduardo Fontana (1995)
10.1016/0921-4526(95)00902-7
Effect of roughness correlations in multilayers on Bragg peaks in X-ray diffuse scattering
Vladimir M. Kaganer (1996)
10.1088/0022-3735/21/2/003
Scanning capacitance microscopy
Charles Bugg (1988)
10.1016/0040-6090(92)90125-U
Study of the texture of conversion coatings with specific optical or catalytic properties. I: Influence of the type of substrate
Adéchion Komla (1992)
10.1016/0043-1648(77)90011-4
Quantitative characterization of abrasive surfaces using a new profile measuring system
G. N. Shah (1977)
10.1016/0041-2678(72)90071-1
Characterization of the working surface of abrasive wheels
R. M. Baul (1972)
10.1080/10402009008981986
Modifying the Lambda Ratio to Functional Line Contacts
Curt A. Moyer (1990)
10.1016/S0022-0248(07)80017-0
Epitaxial growth of high quality ZnSe and ZnSe/ZnS superlattices for optical processing
Chungdee Pong (1993)
Borensztein, Roughening of smooth cold Ag surface by Ag Overlayer studied by differential reflectivity
T. Lopez-Rios (1983)
Effect of surface roughness on the acid etching of amorphous silica: Journal of the American Ceramic Society, v
Affatigato (1996)
Roughening of metal surfaces: Surface
Lapujoulade (1994)
10.1109/14.231536
Dependence of the surface flashover properties of alumina on polishing abrasive parameters
T. Namitha Asokan (1993)
10.1088/0022-3735/12/10/017
A pneumatic Wheatstone bridge for surface roughness measurement
Lawrence H. Tanner (1979)
Effect of surface defects on mechanical properties of powder forged material: Journal of the Japan Society of Powder and Powder Metallurgy v
Takahashi (1994)
Fatigue crack growth in nickelbased superalloys at 500-700 degree: Fatigue and Fracture of Engineering Materials & Structures v
S. P. Lynch (1994)
Surface Roughnessmeasurement, interpretation and significance of data,-1
K. J. Stout (1981)
Analysis and modeling of optical elements and systems: Journal of Engineering for Industry, Transactions of the ASME v
Psang (1994)
10.1016/0039-6028(95)01341-5
A reversible reaction forming (CuO) strings and (Cu)6-clusters on Ag(110) shown by STM
Yuji Matsumoto (1996)
Measurement of surface topography
J. Kagami (1998)
tdesawa, Masanqri, Use of Synthetic Deformed Gratings in Moire Topography: Opt.Commun v
Yatagai (1977)
Characterizing Microsurface quality: Met.Prog
Wright (1978)
Lubrication of rough compliant solids: Elastohydrodyn and Relat Top
P. L. Darbey (1978)
Micromachines show it is a small world after all: Design Engineering (London) Feb
Bartlett (1996)
Impacts of roughness bars on the mixing processes: Proceedings
Xu (1994)
10.1061/(ASCE)0733-9437(1994)120:1(48)
Automated field irrigation system using side weirs
Rajendra Singh (1994)
10.1016/0030-4018(94)00426-U
1D rough surfaces: glitter function for remote sensing
Josué Álvarez-Borrego (1995)
The use of spectral analysis in describing lunar surface roughness
Wesley J. Rozema (1968)
10.1016/0032-5910(92)80074-7
Characterization of solvent interactions with treated titanium dioxide powders
Young-Jin Lee (1992)
10.1243/PIME_PROC_1962_176_077_02
The Thirty-Fourth Thomas Lowe Gray Lecture: Resistance of Ships, with Special Reference to Skin Friction and Hull Surface Condition:
H. Lackenby (1962)
10.1149/1.2048636
Interface Smoothing of High Indium Content InGaAs Layers on GaAs
Sam-Dong Kim (1995)
10.1016/0043-1648(94)06560-8
Erosion of glass by alumina particles: transitions and exponents
Maarten Buijs (1995)
10.1063/1.113785
Measurement of photoemission oscillations during molecular beam epitaxial growth of (001) GaAs, AlAs, AlGaAs, InAs, and AlSb
Jennifer J. Zinck (1995)
10.1016/0043-1648(92)90300-W
Roughness effect of silicon nitride sliding on steel under boundary lubrication
Jean Denape (1992)
10.1016/0039-6028(95)01301-6
Equilibrium morphology of the Ag(110) surface
G Bracco (1996)
10.1243/PIME_PROC_1988_202_105_02
A Revised Philosophy of Surface Measuring Systems
David J. Whitehouse (1988)
10.2514/3.12654
Link between flow separation and transition onset
Jamal A. Masad (1995)
10.1002/pssb.2221350235
Effects of a thin transition layer on the dispersion relation of surface polaritons on a randomly rough surface
Ralf D. Pechstedt (1986)
10.1006/jsvi.1996.0274
WHEEL-RAIL NOISE REDUCTION THROUGH PROFILE MODIFICATION
Paul James Remington (1996)
10.1016/0045-7949(93)90416-B
Probabilistic fatigue life analysis of highway steel bridges
Tao Wang (1993)
10.1016/0043-1648(76)90069-7
Real area of contact and friction stress at high pressure sliding contact
Niels Bay (1976)
New technique for surface shape investigation
C. Wykes (1978)
The gold standard precision specimens of surface
C. R. Lewis (1952)
Wire Assoc Int Inc, Guilford, CT, p
International (1996)
Ranges of unobstructed ground-toground visibility, in U.S. Army Ordnance Corps symposium, Environmental Factors Influencing Optimum Operation of Ordnance Materiel
W. F. Wood (1961)
10.1016/0043-1648(79)90110-8
The influence of surface roughness on gas flow through cracks
Pamela T. Manning (1979)
Effect of ultrasonic vibration on electrical discharge machining characteristics of Ti-6AI-4V alloy: Keikinzoku/Journal of Japan
Yan (1994)
Friction surfaces: Engineering (London) v
Baker (1981)
10.1080/10402008908981918
The Possible Role of Fractal Geometry in Tribology
Frederick F. Ling (1989)
Effect of surface roughness on dielectric strength of thick film dielectrics
W. A. Zdaniewski (1987)
Experimental investigations of the deformation of asperities on the contact interface
Kayaba (1981)
10.1016/0043-1648(82)90179-X
Machined surfaces: Final texture and underlying structure
Derek G. Chetwynd (1982)
Morphology of ballistically aggregated surface deposits, in Fractal Aspects of Materials: Pittsburgh, Materials
R. Messier (1986)
Structure and properties of spray formed 7150 containing Fe and Si: International Journal of Powder Metallurgy (Princeton, New Jersey) v
Plies (1994)
10.1243/PIME_PROC_1972_186_044_02
A Theory of Mixed Lubrication
H. Christensen (1972)
10.1007/978-94-009-1267-0_29
The Topography of Ion-Bombarded Surfaces
Ian H Wilson (1989)
Mechanical contact of heavily loaded surfaces: Rev
J.B.P. Williamson (1971)
Preferred patterns of convection in plane fluid layers: Bifurcation Phenomena and Chaos in Thermal Convection
D. N. Riahi (1992)
Typology of manufactured surfaces
D. J. Whitehouse (1971)
10.1117/12.139241
Mathematical modeling of amplitude-phase measuring system for a precision surface-roughness registration
Yury Snezhko (1992)
Universal Surface Texture Measuring System: SME
Fromson (1976)
The measurement and analysis of surfaces: Tribology
D. J. Whitehouse (1974)
Large-area epitaxial CeO//2 buffer layers on sapphire substrates for the growth of high quality YBa//2Cu//3O//7 films: Thin Solid Films
F. Wang (1993)
10.1243/PIME_PROC_1976_190_074_02
The Failure of Elastohydrodynamic Lubrication of Circumferentially Ground Discs
Anthony Dyson (1976)
The role of NBS in the US National Measurement System for surface finish: Ann
R. D. Young (1974)
Grigor'ev, Microtopography evaluation with scanning electron microscope
N. V. Kholodilov (1985)
10.1109/IMTC.1992.245090
Surface roughness measurement with optical fibers
A. Domański (1992)
10.1002/srin.199605471
Applicability of fractal concepts to surface roughness
Hartmut Pawelski (1996)
AC response of fractal interfaces: Solid State Ionics, Diffusion & Reactions
S. H. Liu (1986)
10.1016/0924-0136(92)90253-O
MACHINABILITY OF CARBON-FIBER EPOXY COMPOSITE-MATERIALS IN TURNING
Ki Soo Kim (1992)
10.1007/BF01121728
Status and prospects for the development of contact instruments for measuring surface roughness
V. I. Veretennikov (1975)
10.1016/0169-4332(94)00431-5
Laser-induced surface modification and metallization of polymers
H. Frerichs (1995)
10.1002/pssa.2211470141
Angular Dependence of Coercive Field in DC-Sputtered Nd2Fe14B Films
M. A. Abdellateef (1995)
Factors affecting accuracy of slope-area discharge determination of the September 1992 flood in Raven Fork, Western North Carolina
William H. Eddins (1994)
10.1016/0143-8174(83)90038-0
The use of discriminant function techniques in reliability assessment and data classification
R. S. Sayles (1983)
10.1080/10402009408983273
A model for static sealing performance of end face seals
Izhak Etsion (1994)
10.1016/0043-1648(92)90247-6
On the experimental verification of the Greenwood-Williamson model for the contact of rough surfaces
Z. Handzel-Powierza (1992)
10.1086/627164
Barchan Dunes of Imperial Valley, California
Robert Matheson Norris (1966)
10.1117/12.148073
MMW modeling and measurement of targets and materials
Keith D. Trott (1993)
10.1243/JMES_JOUR_1970_012_047_02
Real Area of Contact between a Rough Surface and a Softer Optically Flat Surface
P. W. O'callaghan (1970)
10.1016/0043-1648(73)90039-2
Mean separation and real contact area between surfaces pressed together under high static loads
Ashok Uppal (1973)
10.13031/2013.27904
Low and High Strain Macrobehavior of Grain Masses—The Effect of Particle Eccentricity
M. Aloufi (1995)
10.1063/1.115924
Atomic force and optical near‐field microscopic investigations of polarization holographic gratings in a liquid crystalline azobenzene side‐chain polyester
P. S. Ramanujam (1996)
10.1117/12.215588
Scattering effects from residual optical fabrication errors
James E. Harvey (1995)
10.1016/0584-8547(93)80019-Q
Boron nitride sample carriers for total-reflection X-ray fluorescence
Andreas Prange (1993)
Surface measurement, An advancing technology: Quality Progress, V.20
W. E. Drews (1987)
Surface roughness effect on vibration behavior of mechanical contact at lowamplitude fretting
S. G. Kostogryz (1991)
10.1109/8.204741
A comparison of scattering model results for two-dimensional randomly rough surfaces
Taiqian Yang (1992)
Characterizing microroughness and haze on silicon wafers
Bullis (1996)
10.2493/jjspe1933.42.1197
Study on the Pitch of Ground Surface Roughness
Seiki Matsui (1976)
Surface phase transitions in twocomponent systems: Surface Science, v
Mazzeo (1996)
10.1115/1.3261870
Theoretical Approach to Turbulent Lubrication Problems Including Surface Roughness Effects
Hiromu Hashimoto (1989)
Effect of polishing on glass surface properties: Fizika i Khimiya Obrabotki Materialov
N. N. Khomenko (1992)
Application of acceptable quality areas in controlling technological foundry processes: Liteinoe
F. I. Bernatskij (1994)
Named, A study
T. C. Buttery (1979)
Ultrasonic method for jogging testing: Defektoskopiya no
A. G. Vasil'ev (1994)
10.1115/1.2921661
Influence of Contact Temperature on Contact Fatigue Failure Forms: Part 2—The Test and Analysis
Long-qing Chen (1993)
Spectral approach for analyzing the rill structure over hillslopes
Govindaraju (1994)
10.2109/jcersj.103.162
Effect of Surface Roughness of Substrates on Residual Stress of TiN Coating
Yuji Chiba (1995)
10.2514/3.46940
Characteristics of surface roughness associated with leading edge ice accretion
Jaiwon Shin (1996)
10.1063/1.350267
Scanning tunneling microscopy on rough surfaces: quantitative image analysis
Guenter Reiss (1991)
10.1088/0508-3443/17/12/310
Constriction resistance and the real area of contact
Jaqueline A Greenwood (1966)
10.1115/1.3253232
Effect of surface roughness on elastohydrodynamic line contact
Bhaskar Chandra Majumdar (1982)
Effects of polyimide structure and morphology on adhesion to metals
Ravi F Saraf (1995)
10.1016/S1065-7355(96)90066-8
Behavior of cement based matrices reinforced by randomly dispersed microfibers
David A. Lange (1996)
10.1016/0043-1648(82)90140-5
Wear characteristics, friction and surface topography observed in the dry sliding of as-cast and agehardening Al-Si alloys☆
A. K. De Sarkar (1982)
10.1016/0925-3467(95)00017-8
Rough surface absorption of Nd:YAG laser rods
Guido Mann (1995)
10.2514/3.679
Contact conductance of selected metal-matrix composites
Daniel G. Blanchard (1992)
10.1115/1.2902148
Machinability of Fiber-Reinforced Thermoplastics in Drilling
H. Hocheng (1993)
10.1061/(ASCE)0733-9429(1994)120:1(22)
Hydraulics of Stationary Capsule in Pipe
Henry C. Liu (1994)
10.1007/BF01341557
Surface roughness measurements in finish turning
Dunbao Yan (1996)
10.1109/IMTC.1996.507382
Effect of noise on surface roughness measurements
S. Z. Sahwi (1996)
10.1088/0960-1317/5/2/014
Etch rate and surface roughness of deep narrow U-grooves in (110)-oriented silicon
Petra Krause (1995)
10.1115/1.3670456
The Role of Topography in the Cutting Performance of Abrasive Tools
H. T. McAdams (1964)
10.1021/la00001a029
Structural Rearrangements upon Photoreorientation of Amphiphilic Azobenzene Dyes Organized in Ultrathin Films on Solid Surfaces
Minika Schoenhoff (1995)
10.1016/0042-207X(87)90097-2
Some transport properties of granular metal films with rough surfaces
F. Warkusz (1987)
10.1016/0038-092X(88)90058-8
Effect of artificial roughness on heat transfer and friction factor in a solar air heater
B. N. Prasad (1988)
10.1016/0043-1648(72)90273-6
The real area of contact between a rough and a flat surface
Ashok Uppal (1972)
Hegmon, Evaluation of pavement surface texture significance and measurement techniques: 2nd Int.Conf.on Met
J. C. Wambold (1982)
IEEE, Piscataway, NJ, 95CH35842
Report (1995)
/OBe//2////.//5, a bulk metallic glass
I. 5NJ (1996)
Raschet veroyetnost'ikh kharakteristik
Rudzit (1982)
10.1016/0894-1777(94)90058-2
Effects of oxidation and surface roughness on contact angle
Kwang Taek Hong (1994)
On forming of surface
T Sata (1966)
Studying microturning process of parts from optical crystals: Avtometriya no. 1 Jan-Feb
L. L. Burman (1992)
Effects of friction and wear on
A. H. Hehn (1970)
10.1016/S0257-8972(09)90079-2
Surface roughness created by laser surface alloying of aluminium with nickel
Dipak Kanti Das (1994)
10.1016/0043-1648(84)90111-X
Surface topography of cylinder bores — the relationship between manufacture, characterization and function
Ken J. Stout (1984)
10.1111/j.1365-2818.1988.tb01385.x
Effects of sputtering on the surface of graphite
Nobuyuki Nakagiri (1870)
10.1016/0043-1648(91)90360-7
A model for friction in quasi-steady-state sliding part I. Derivation
Jia-lü Zhang (1991)
10.1163/156856194X00302
Improved adhesion between plasma-treated polyimide film and evaporated copper
Norihiro Inagaki (1994)
10.1126/science.279.5359.2048
Integrated Science and The Coming Century of The Environment
Edward O. Wilson (1998)
10.1016/0921-4526(94)90611-4
Effect of surface roughness on the eddy viscosity of superfluid4He
Yoshiko Fujii (1994)
10.1016/0043-1648(81)90124-1
Adhesion between metal surfaces: The effect of surface roughness
S. K. Roy Chowdhury (1981)
HOW TO EXTEND THE LIFE OF ASPHALT PAVEMENT
P Sontowski (1995)
10.1016/0301-679X(95)00093-J
Influence of surface roughness on friction and scuffing behaviour of cast iron under sparse lubrication
Osamu Jinno (1996)
Viscous flow around oscillating roughened cylinders
Koji Otsuka (1994)
10.1016/0020-7357(77)90013-0
Digital oscillating stylus profile measuring device
Mark A. Fugelso (1977)
10.1016/0039-6028(96)00303-2
What information can be obtained by RHEED applied on polycrystalline films
Stéphane Andrieu (1996)
10.1021/la00019a002
Simulations of self-assembled monolayers under compression : effect of surface asperities
Kenneth J. Tupper (1994)
10.1115/1.2822618
Heat transfer enhancement in narrow channels using two and three-dimensional mixing devices
Suresh V. Garimella (1995)
INFLUENCE OF THE SURFACE OF THE BASE ON THE MICROPROFILE OF THE CATHODIC DEPOSIT
Tatyana Arzhanova (1992)
10.1016/0030-4018(77)90025-6
Measurement of surface roughness using dichromatic speckle
Hitoshi Fujii (1977)
10.1007/BF02648525
Influence of substrate preparation on the flattening and cooling of plasma-sprayed particles
Christian Moreau (1995)
10.1680/macr.1995.47.170.57
A unified failure envelope from the evaluation of concrete repair bond tests
Peter J. Robins (1995)
10.1002/pssa.2211540215
012) Textured LiNbO3 Waveguiding Films Grown on SiO2 by Pulsed Laser Deposition Technique
Xin Quo (1996)
10.1139/l94-004
Load model for bridge design code
Andrzej S. Nowak (1994)
10.1061/(ASCE)0733-9445(1995)121:8(1245)
Calibration of LRFD Bridge Code
Andrzej S. Nowak (1995)
10.1557/JMR.1994.1035
FIBER PUSH-OUT TESTING APPARATUS FOR ELEVATED TEMPERATURES
Jeffrey I. Eldridge (1994)
10.1016/0956-7151(92)90168-E
Electrochemical determination of the fractal dimension of fractured surfaces
Attila R. Imre (1992)
Laminar-turbulent transition process in the presencce of simulated wall roughness
Jerzy M. Floryan (1992)
10.1016/0030-4018(95)00645-1
Manifestation of electrodynamical forbiddance of the quadrupole SERS mechanism in the methane molecule
Aleksey Mickhailovich Polubotko (1996)
10.1016/0043-1648(74)90106-9
Surface and shape effects in the measurement of friction forces
Maurice Godet (1974)
10.1109/18.57199
The wavelet transform, time-frequency localization and signal analysis
Ingrid Daubechies (1990)
10.1016/0304-3991(92)90442-M
Measuring the fractal dimension with STM: application to vacuum-evaporated gold
José M. Gómez-Rodríguez (1992)
Predicting Roughness in Concrete Channels with Bed Load
Ronald R. Copeland (1995)
10.1006/jsvi.1993.1082
Wheel-rail Noise Generation, Part I: Introduction And Interaction Model
David Timothy Thompson (1993)
Enamelling of glass by CO2 laser treatment
C. Buerhop (1995)
10.1364/AO.14.000872
Optical surface roughness determination using speckle correlation technique.
Dominique Léger (1975)
10.1080/00202967.1948.11869502
Surface Reflectometer for Evaluating Polished Surfaces
Eric Alexander Ollard (1948)
10.1002/hyp.3360050103
DIGITAL TERRAIN MODELLING: A REVIEW OF HYDROLOGICAL, GEOMORPHOLOGICAL, AND BIOLOGICAL APPLICATIONS
I. D. Moore (1991)
10.1016/0890-6955(92)90080-Z
The perturbation dimension for describing rough surfaces
D. Wehbi (1992)
10.1016/0924-0136(95)02060-8
Computer-integrated ball burnishing of a plastic-injection-mould cavity insert
S.S.G. Lee (1996)
10.1680/iwtme.1996.28428
SMALL CATCHMENT AREA FLOOD ESTIMATION.
Michael J Hall (1996)
Vibration and Impact in Skewed Steel Bridges
Ton-Lo Wang (1993)
10.1016/0098-3004(89)90033-2
The use of fractals and pseudofractals in the analysis of two-dimensional outlines: Review and further exploration
W. B. Whalley (1989)
10.1557/s0883769400035302
Effects of Stress on Step Energies and Surface Roughness
Christopher C. Roland (1996)
Surface roughness parameters: Strojarstvo, V.26
B. Krizan (1984)
A study of abrasive blasted
H. G. Daniel (1969)
Computer Assistance in Surface Topographic Analysis: Manuf.Eng.Trans
Beers (1978)
10.1002/pen.760351203
An overview of the basic aspects of polymer adhesion. Part II: Application to surface treatments
Georges Fourche (1995)
Aggregative stability of suspensions and density of their coagulation structure: Kolloidnyi
Z. M. Yaremko (1994)
Designation of metallic surfaces.Part
H. Thielsch (1950)
Flow Study of In-Service Sanitary Sewers Rehabilitated with Insitupipe
Lisa Harris (1993)
Moment analysis of engineering surfaces: 2nd Int Conf.on Met.& Prop, of Eng.Suri
Walsh M-l- YOlles (1982)
Crankshafts finished and sized
Judge (1995)
An analysis of the elastic and plastic deformations of machined surfaces in contact.(lst report, deformations of contacting rough surfaces when
Macmillan (1975)
The 3-D representation of engineering surfaces
W. Watson (1988)
The unsteady friction heating during sliding of elastic pressurized bodies: Prikladnaya
A. A. Evtushenko (1992)
A fractal-based method for describing surface texture
S. Chesters (1991)
Mechanical, A review of surface roughness measurement techniques: Engineering
R. A. Agarwal (1989)
Intensification of convective heat transfer and self-arrangement of whirl structures: Teploenergetika
M. A. Gotovskij (1995)
Dependence of approach of rough surfaces on contacting bodies on load in the elastic contact case
A. N. Mikhin (1990)
Scuffing failure investigation of GCM 5 bearing steel friction pairs: Mocaxue Xuebao/Tribology v
Zhpu (1994)
Contact of rough bodies and its conductivity
N. K. Myshkin (1983)
Scattering of scalar fields by hard and soft rough surfaces. Angular distribution of intensity: Akusticheskii
A. L. Gavrilov (1992)
Direct cylinder bore surface measurement during engine operation: Experimental Methods in Engine
R. F. AI-Khatib (1988)
pH-cqntrolled TMAH etchants for silicon micromachining: International Conference on Solid-State Sensors and Actuators, and Eurosensors IX
Tabata (1995)
10.1115/92-GT-195
An Experimental Study of Heat Transfer in a Large-Scale Turbine Rotor Passage
Michael F. Blair (1992)
Statistical model of elastic Optimization of roughness on sliding motion guideways
N. V. Gitis (1986)
10.1115/1.2904379
Tribology and Mechanics of Magnetic Storage Devices
Bharat Bhushan (1990)
10.1109/8.496258
A new numerical method for rough-surface scattering calculations
D. A. Kapp (1996)
The accuracy of profilometric wear volume measurement on the rough LC1B coated surfaces of an articulating joint
P. T. Newman (1989)
10.1111/j.1151-2916.1995.tb08214.x
Effect of interface roughness on fiber push-out stress
Hong-yuan Liu (1995)
Effect of die surface characteristics on processing additive performance: Annual Technical Conference ANTEC
Priester (1994)
Surface morphology
Y. Bruynseraede (1996)
lain, Classification of threebody abrasive wear and design of a new tester: Wear of Mater
A. Misra (1979)
10.1080/10589759608952853
GEOMETRICAL ANALYSIS OF SEGMENTED ULTRASONIC FLAW REGIONS
Ian Dunlop (1996)
The stylus method of surface measurement
R. E. Reason (1963)
10.1049/tpe.1972.0028
The specification of surface qualityߝquo vadis
John Halling (1972)
10.1002/ls.3010080308
On the theory of time-dependent micro-TEHL for a non-Newtonian lubricant in line contacts
Yang (1996)
Analytical model for stress concentration and failure along fault planes: Rock Mechanics
Hopkins (1991)
10.1016/0167-6105(94)00014-5
An analytical model for simulation of the wind field in a typhoon boundary layer
Yan Meng (1995)
Tribological aspects of wear in parts of cylinder-piston group of powerful ICE
B. M. Astashkevich (1995)
Profiles: J.Opt Soc.Am
Rasigni (1981)
Measurement of ultrafine surface
J. C. Moody (1968)
10.1016/0254-0584(95)01618-5
Surface/interface X-ray diffraction
Haydn Chen (1996)
Measurement of Surface Roughness
Kozo Miyamoto (1998)
Surface roughness standards
W. M. de Vries (1963)
10.2166/wst.1994.0139
Tackling the Bank Erosion Problem: (Re-)Introduction of Willows on Riverbanks
I. P. van Splunder (1994)
10.1007/BF00037814
Fracture parameters for interfacial cracks: an experimental-finite element study of crack tip fields and crack initiation toughness
Liming Xu (1995)
10.1364/AO.18.004051
Surface roughness measurements by means of polychromatic speckle patterns.
Carl Trygve Stansberg (1979)
10.1016/0043-1648(95)90187-6
An integrated approach to the characterization of surface wear. I: Qualitative characterization
Weiping P. Dong (1995)
10.1038/scientificamerican1089-98
Scanned-probe microscopes
Hemantha K. Wickramasinghe (1989)
Influence of topographical input data on the accuracy of wind flow modelling in complex terrain
Niels Gylling Mortensen (1998)
10.4271/922464
DYNAMIC PAVEMENT LOADS AND TESTS OF ROAD-FRIENDLINESS FOR HEAVY VEHICLE SUSPENSIONS
L. Gyenes (1992)
10.1080/05698196308971998
Surface Roughness Effects on Metallic Contact and Friction
Michael J. Furey (1963)
10.1090/qam/1343468
A model for the effect of roughness on the load capacity of journal bearings
David W. Pravica (1995)
Problems with rough surfaces
John A. Greenwood (1992)
10.1061/(ASCE)0733-9445(1993)119:8(2387)
Impact Studies of Multigirder Concrete Bridges
Dongzhou Huang (1993)
10.1051/jp4:1994103
Basic aspects regarding irregular metal surfaces and their application in electrochemistry
A. J. Arvia (1994)
10.1117/12.20373
Measuring surface roughness of an optical thin film with scanning tunneling microscopes
Khaled J. Habib (1990)
10.1080/05698198108982992
Elastohydrodynamic Film Thickness Measurements of Artificially Produced Nonsmooth Surfaces
C. Cusano (1981)
10.1080/00150199408017615
Spectroscopic ellipsometry studies of ferroelectric thin films
Susan Trolier Mckinstry (1994)
10.1016/0141-6359(81)90010-6
Burnishing of metallic surfaces — a review
R. L. N. Murthy (1981)
10.1179/000705992798268585
Electrochemical impedance spectroscopy of plastically deformed mild steel
Carmen Mireya Rangel (1992)
10.1016/0921-4526(95)00905-1
Dynamic scaling phenomena in growth processes
Mehran Kardar (1996)
10.1109/8.204737
Electromagnetic scattering from perfectly conducting rough surfaces (a new full wave method)
Robert E. Collin (1992)
10.1063/1.116423
EXTRACTION OF REAL-SPACE CORRELATION FUNCTION OF A ROUGH SURFACE BY LIGHT SCATTERING USING DIODE ARRAY DETECTORS
Yiping Zhao (1996)
10.1016/0377-0257(94)80054-5
Effect of surface properties on polymer melt slip and extrusion defects
Nadia El Kissi (1994)
10.1115/1.3184494
On Some Aspects of Surface Formation in ECM
O. V. Krishnaiah Chetty (1981)
10.1002/aic.690410432
Excluded volume contribution to the osmotic second virial coefficient for proteins
B. L. Mc Neal (1995)
10.1016/0956-716X(92)90688-B
Fracture resistance of an adhesive interface
Michael D. Thouless (1992)
10.1016/0167-6105(94)90007-8
Aerodynamic forces on circular cylinders of finite height
Yasushi Uematsu (1994)
10.1016/0043-1648(73)90082-3
The plastic contact between a rough and a flat surface
Ashok Uppal (1973)
10.1016/0043-1648(73)90021-5
Significance of profile length in roughness measurements
Vm Radhakrishnan (1973)
10.1115/1.3251585
The Pearson System of Distributions: Its Application to Non-Gaussian Surface Metrology and a Simple Wear Model
Trevor A. Spedding (1980)
10.1080/10402009508983456
Die-Workpiece Interfacial Behaviors in Axisymmetric Forging Processes with Flat Dies
Sy-wei Lo (1995)
10.1147/rd.305.0472
Scanning tunneling microscopy of surface microstructure on rough surfaces
James K. Gimzewski (1986)
10.1016/0043-1648(79)90109-1
Roughness, friction and wear: The effect of contact planform
K. L. Woo (1979)
10.1016/0043-1648(95)06764-7
Surface roughness analysis of glass-ceramic substrates and finished magnetic disks, and Ni-P coated Al-Mg and glass substrates
Chin Y. Poon (1995)
10.1016/0043-1648(82)90351-9
Spectral analysis of the finish of polished optical surfaces
Eugene L. Church (1982)
10.1109/16.182518
Properties of nitrogen-implanted SOI substrates
Stanley Walter Polchlopek (1993)
10.1016/0921-4526(94)90116-3
Whispering gallery effect for the testing of concave surface microroughness
Inna N. Bukreeva (1994)
10.1016/0039-6028(95)00656-7
Surface damage produced by 20 keV Ga bombardment of Ge(001)
Pascal Bellon (1995)
10.1016/0039-6028(95)01148-X
Surface morphology of Au(111) after exposure to oxygen at high temperature and pressure
Lijian Huang (1996)
10.1121/1.394543
The reflection of radiation from randomly irregular surfaces
Shimshon Frankenthal (1987)
10.1002/pen.760352211
Comparisons of experimental data to indices of adhesion derived from dielectric models
Nobuya Iwamoto (1995)
Surface analysis - A new tool in erosion research
J. J. Witton (1979)
10.1016/0167-6105(92)90434-C
Updating the Davenport roughness classification
Jon Wieringa (1992)
Evaluating Flow Resistance Using Height of Roughness Protrusions
Ivana Marešová (1994)
10.1080/00405009308631250
Measurement of Fabric Roughness by a Non- contact Method
R. B. Ramgulam (1993)
10.1016/0043-1648(72)90301-8
Characterisation of cylinder bore surface finish— A review of profile analysis
J. E. Willn (1972)
10.1243/PIME_PROC_1973_187_047_02
Analysis of Some of the Reference Lines Used for Measuring Surface Roughness
Venkataraman Radhakrishnan (1973)
10.1016/0169-4332(95)00489-0
Single shot excimer laser annealing of amorphous silicon for AMLCD
Pierre Boher (1996)
10.1007/BF00619546
Determination of the autocorrelation function of height on a rough surface from coherent light scattering
Peter Chandley (1976)
10.1016/0030-3992(95)00051-8
Correlation between roughness and porosity in rocks
M. A. Rebollo (1996)
10.1115/1.2804372
Fatigue Gage Utilizing Surface Roughening of Aluminum Foil
Yasuo Nagase (1995)
10.1080/00207549608904964
Analysis of model building techniques for the development of machinability database systems
I. A. Choudhury (1996)
On surface roughness and implant incorporation
Ann Wennerberg (1996)
10.1049/jipe:19440025
Surface finish and its measurement
Richard Edmund Reason (1944)
10.1016/0956-7151(95)90285-6
Extensive wetting due to roughness
Frederick G. Yost (1995)
10.1016/0043-1648(82)90190-9
Plate roughness and hydrodynamic drag
Kong Bieng Chuah (1982)
10.1016/S0007-8506(07)62223-9
Generation of Parabolic and Toroidal Surfaces on Silicon and Silicon-Based Compounds Using Diamond Cup Grinding Wheels
Zhaowei Zhong (1994)
10.1115/1.2920314
Limitations and Corrections of Optical Profilometry in Surface Characterization of Carbon Coated Magnetic Recording Disks
Yan Li (1990)
10.1016/0960-1686(92)90281-O
Measurement and modelling of cloudwater deposition to a snow-covered forest canopy
Martin Gallagher (1992)
On CLA value obtained with direct
J. Nara (1966)
Induced tangential contact vibrations of die within preliminary shift: Problemy Prochnosti i Nadezhnos'ti
A. N. Tritenko (1992)
Shear surface waves in periodic structure of rectangular projections of small height: Akusticheskii
S. V. Biryukov (1992)
10.1016/0141-6359(81)90092-1
Potential use of image analysis techniques in surface texture studies
D. Graham (1981)
Fractal roughness investigation of isolropically etched surfaces: Journal of ComputerAssisted Microscopy
Skands (1995)
Study of surface roughness using microdensitometer analysis of electron micrographs of surface replicas - 2
Monique Rasigni
Discrete properties of random surfaces: Phil
D. J. Whitehouse (1978)
10.1109/55.363215
SOI/bulk hybrid technology on SIMOX wafers for high performance circuits with good ESD immunity
Mansun Chan (1995)
10.1016/0043-1648(95)90205-8
Measurements of real contact areas using PET films (thickness, 0.9 μm)
Isami Nitta (1995)
10.1016/0043-1648(84)90221-7
Accuracy of profile measurements by means of a focused laser beam
Marek Dobosz (1984)
10.1016/0360-3199(93)90174-9
Study of electrode activities towards the hydrogen evolution reaction by a.c. impedance spectroscopy
Andrzej Lasia (1993)
10.1016/0022-4898(92)90048-O
Development of a criterion for road surface roughness based on power spectral density function
D. M. Xu (1992)
10.1038/273573b0
Topography of random surfaces (reply)
Richard S. Sayles (1978)
10.1016/0043-1648(95)90027-6
Oxidation and its influence on low pressure polyethylene wear
Yu.M. Pleskachevsky (1995)
10.1017/S0022112096000432
Mechanics of collisional motion of granular materials. Part 3. Self-similar shock wave propagation
A. D. Gol'dshtein (1996)
10.1002/pssa.2211500146
The dependence of quantum-well features in photoemission on film quality†
K. Meinel (1995)
10.1243/PIME_CONF_1967_182_324_02
Paper 25: Development of Objective Methods for Judging the Quality of Ground and Polished Surfaces in Production
Jane Westberg (1967)
10.1016/0043-1648(91)90307-G
Modification of the elastic-plastic model for the contact of rough surfaces
D. G. Evseev (1991)
10.1016/0039-6028(95)01268-0
Surface studies by means of 45° reflectometry
Lothar Bleckmann (1996)
10.1002/pssa.2211420140
Effects of surface roughness and patches on the work function of cobalt
Susumu Saito (1994)
10.1117/12.145559
Feasibility of moire contouring for flatness checking of steel plates
Eric J. Sieczka (1993)
10.1016/0257-8972(95)02528-6
Surface roughening of metallic substrates by high pressure pure waterjet
T. Taylor (1995)
10.1016/0043-1648(75)90206-9
The normal approach between rough flat surfaces in contact
Kenji Nuri (1975)
10.1109/IGARSS.1995.524088
Near-surface moisture profile effects on the microwave emission of bare soils
Konstantin Georgiev Kostov (1995)
10.1080/00221686.1994.10750038
Round buoyant jet in shallow water: bed shear velocity
Amanda J. Johnston (1994)
10.1016/S0007-8506(07)61217-7
New Grinding Methods for Aspheric Mirrors with Large Curvature Radii
Zhaowei Zhong (1992)
Highsensitive moire topography for measuring errors in curved smooth surfaces
T. Konde (1982)
Non-conventional grinding as a tribological system: Abrasives Jun-Jul
Marciniak (1996)
Analysis of surface profiles by computational methods: J.lnst.Eng
V. Radhakrishnan (1971)
Mphammad, Critical path incremental loading procedure for system reliability analysis of offshore structures: International Offshore and Polar Engineering Conference
Rosyid (1994)
An evaluation of machined surface topography.(2nd report, on statistics of surface asperity heights)
T. Tsukada (1975)
10.1002/stem.170001
On relevance.
Don Metcalf (1999)
Approximation of ball reducer parts wear: Trenie i Iznos v
M. F. Pashkevich (1995)
Effect of preweathering, surface roughness, and wood species on the performance of paint and stains
Richard S. Williams (1994)
Study of internal structure of closed contacts under by a neutrographic method
P. Johannet (1972)
Contact mechanism between sliding surfaces (1 st report)-Effects of probability density of surface heights and shapes of asperities
T. Hisakado (1986)
Surface Roughness - A Criterion for Machinability: Mech.Eng.Bull
P. K. Mukherjee (1977)
10.1016/0043-1648(93)90411-E
A study of mixed lubrication parameters of journal bearings
A. Ramamohana Rao (1993)
Evaluating specific surface area by the secondary electron emission method
Grigor'ev (1988)
Applications de ('analyse de surface aux problemes de lybrification. (Application of Surface Analysis to Lubrication Problems)
J. M. Georges (1979)
Principles and applications of tribology: Pergamon Press, Oxford UK, 388p
D. F. Moore (1975)
10.1016/0169-4332(94)00106-5
The structure and biomedical behavior of ion bombarded and plasma polymerized segmented polyurethane
Li De-jun (1994)
Calculation of the contact area between solid surfaces with polymer coatings
A. P. Makushkin (1975)
Representation of surface irregularity using waveform model: Bull Jpn
Ito (1979)
Effect of Secondary Structure on the ability of a Rough Surface to Scatter Light: Sov
O. K. Taganov (1976)
Surface roughness topography investigations: Chemnitz, 8th Internationales
J. Rudzitis (1992)
Lapping and polishing process to achieve high quality alumina surfaces for applications in device fabrication: Thin Solid Films v
Khan (1992)
Shear behaviour of physical models of rock joints under restricted dilation conditions: Engineer v
P.G.R. Dharmaratne (1990)
Surface quality as a function of static and dynamic machine tool behaviour during the cutting process
M. Week (1988)
Modem trends in the measurement of surfaces: Rev
D. J. Whitehouse (1975)
Tommei, Theory of atom scattering from disordered surface
A. C. Levi (1983)
How rough the surface?: Prod
H. W. Eberhardt (1965)
Werkstatt Betr, Optical surface analysis for determining surface Irregularities: V.118
N. Rau (1985)
10.1115/1.3261571
Effect of Surface Roughness on the Point Contact EHL
Dong Zhu (1988)
Influence of fractal surface roughness on reflectance: Optica
M. Latka (1998)
10.1016/0043-1648(81)90151-4
Analytical study of surface roughness in turning
S. Vajpayee (1981)
10.1029/90JB02107
EUCLIDEAN AND FRACTAL MODELS FOR THE DESCRIPTION OF ROCK SURFACE ROUGHNESS
William L. Power (1991)
10.13031/2013.28717
AERODYNAMIC ROUGHNESS AND SALTATION TRAPPING EFFICIENCY OF TILLAGE RIDGES
Lawrence J. Hagen (1992)
10.1115/1.2920277
Advanced Multilevel Solution of the EHL Line Contact Problem
Cornelis H. Venner (1990)
10.1016/0141-6359(79)90044-8
An analysis of surface profiles for stationarity and ergodicity
Ram A. Agarwal (1979)
10.1016/0043-1648(95)90176-0
The effect of humidity and electrical fields upon the wear of high density polyethylene and polytetrafluoroethylene
A. Mcnicol (1995)
10.1016/0042-207X(94)00053-0
Surface morphology of films having columnar grains
Dibyendu Bhattacharyya (1995)
10.1016/0043-1648(75)90310-5
Ra and the average effective strain of surface asperities deformed in metal-working processes
Niels Bay (1975)
10.1016/0956-716X(95)00353-W
Study of electroless nickel plating of ceramic particles
R. L. Deuis (1995)
10.1007/BF00824556
Metrological support to means of measuring deviations from rectilinearity and planarity
L. L. Medyantseva (1981)
10.1080/01431169408954200
The patchwork problem: effects of sub-pixel scale non-uniformity on the spatially-averaged sensible heat flux
K. J. Mcaneney (1994)
10.1016/0043-1648(86)90267-X
Optical measurements of chatter marks
N. Rau (1986)
10.1080/01611598608241265
Fractal scaling in thin film condensation and material surfaces
Paul Z. Meakin (1986)
10.1017/S0022112096000511
Effective boundary conditions for Stokes flow over a rough surface
Kausik Sarkar (1996)
10.1063/1.115610
Capillary waves in pulsed excimer laser crystallized amorphous silicon
David K. Fork (1996)
10.1016/0169-4332(95)00380-0
Surface diffusion and surface atomic roughness on Ir(001) surface and terraces
Chonglin Chen (1996)
10.1016/0043-1648(88)90040-3
A general expression for plasticity index
Chengwei Wu (1988)
10.1088/0950-7671/22/12/310
The Measurement of Finely Finished Surfaces by Optical Interference
Colin Timms (1945)
10.1007/BF00680314
Remote laser tester of the surface roughness of articles
Vladimir Ya. Mendeleev (1995)
10.2307/3225040
Multiple-beam interference microscopy of metals
Samuel Tolansky (1971)
10.1299/jsme1958.20.915
On Measurement of Three Dimensional Deformation Using Moire Method and Light Slicing Method
Kazunori Kato (1977)
10.1016/0143-8166(92)90012-V
Real time measurement of surface roughness on ground surfaces using speckle-contrast technique
Ulf A. Persson (1992)
10.1557/PROC-399-257
Interfacial Coarsening in an MBE Growth without Slope Selection
Leonardo Golubović (1995)
10.1016/S0007-8506(07)62306-3
Fractal geometry used for the characterization of sheet surfaces
Eckart Prof.Dr.-Ing. Doege (1995)
10.1088/0957-4484/7/1/007
Enhancement of instrument and machine capabilities
David J. Whitehouse (1996)
10.1243/03093247V303175
An experimental investigation of dynamic crack propagation
Thomas H. Hyde (1995)
10.1016/0143-8166(92)90015-Y
Specular reflectance of cold-rolled aluminum surfaces
Raimo V. J. Silvennoinen (1992)
10.1115/1.2817394
Effect of Laminar Flow Control by Suction on Separation
Jamal A. Masad (1996)
10.1046/j.1365-2389.1998.00160.x
Mathematical morphology for analysing soil structure from images
Horgan (1998)
10.1088/0508-3443/13/1/310
Method for the measurement of surface microtopography; experiments with gelatine models
J. D. Huffington (1962)
10.1364/AO.19.000561
Ellipsometry of rough surfaces.
Theodore V. Vorburger (1980)
10.1016/0038-1098(93)90451-R
Relaxation processes and in-plane electron mobility limited by interface defects in CdTeCd1-xMnxTe quantum wells
T. Z. Kachlishvili (1993)
10.1016/0039-6028(94)00750-0
Atomic burrowing and hole formation for Au growth on Ag(110)
E. S. Hirschorn (1995)
Contact mechanism between sliding surfaces (4th report) theoretical analysis of count erf ace roughness effect on the friction and wear of polymers
T. Hisakado (1986)
10.1109/36.368209
A comparison of backscattering models for rough surfaces
Kunshan Chen (1995)
High-performance cylindrical surface form grinding: Zeitschrift fur Wirtschaftlichen Fabrikbetrieb, v
E. Jisheng (1996)
Wire EDM of SiC reinforced aluminum: Integrated Design and Manufacturing of Composites American Society of Mechanical Engineers, Petroleum Division
M. Monno (1994)
Procedure and mechanism of electrostatic sealing: Bandaoti Xuebao/Chinese
Luo (1992)
Changes in the surface morphology
Affatigato (1998)
STM/STS and XPS study of oxidized metal powders: Ultramicroscopy v
O. Enea (1992)
Visible and infra-red scattering from well-characterised surfaces: Surface Topography
D. L. Jordan (1988)
Statistical characteristics of surface profile: Bull. Japan
H. Hasunuma (1966)
10.9753/icce.v23.%p
THE EFFECT OF WAVES ON SURGES IN THE NORTH SEA
Carel Mastenbroek (1993)
Bin zShlgerat fur die
H. Wolff (1967)
Determination of surface roughness by correlation of laser speckle in real time
Y. Zheng (1985)
10.1111/j.1460-2695.1994.tb00226.x
THE FATIGUE RESISTANCE OF PEENED 7050-T7451 ALUMINIUM ALLOY—REPAIR AND RE-TREATMENT OF A COMPONENT SURFACE
Peter Sharp (1994)
Limits of applicability of the Bouguer model for analyzing the optical reflective characteristics of rough metal surfaces
Vladimir Ya Mendeleev (1995)
10.1088/0957-4484/3/3/011
Atomic layer etching and sidewall roughness measurement using the scanning tunneling microscope
Shinji Matsui (1992)
10.1016/0043-1648(92)90079-N
High-speed video photographs of lubrication breakdown in squeeze-sliding contact
Jan Lundberg (1992)
10.13031/2013.28097
Plant Canopy Effects on Wind Erosion Saltation
Lawrence J. Hagen (1994)
10.1016/0254-0584(93)90205-Z
A procedure for achieving single crystal-like zirconia particles
Silvia Ardizzone (1993)
10.1007/BF01151531
The assessment of particle friction of a drug substance and a drug carrier substance
Fridrun Podczeck (1995)
Surfaces in metal rolling: Engineered Surfaces American Society of Mechanical Engineers, Production Engineering Division
Wilson (1992)
Partial solution to fitting large
Lichten (1979)
Vanherck,.P., Survey of reference lines in the assessment of surface texture
D. J. Whitehouse (1972)
Influence of intermetallic precipitates on the adhesion of electrodeposited zinc to aluminum cathodes: Hydrometallurgy v
Gu (1995)
acob, Rotationalecho double-resonance NMR to observe the interfaces of heterogeneous polymer blends: Macromolecules
Tong (1995)
10.1364/OPN.2.5.000014
Precision metrology for studying optical surfaces
Jean Louise Mcpherson Bennett (1991)
10.1109/FREQ.1992.270056
Low temperature limitation on the quality factor of quartz resonators
A. El Habti (1992)
3D Free Surface Flow Model Verifications - A Proposed Procedure
Sam S. Y. Wang (1995)
Optical method of roughness measurement light-scattering method
M. Dobosz (1984)
General expression for plasticity
C. Wu (1988)
The measurement of surface finish, Part I: Metrology and Inspection, p
M. O. Nicolls (1975)
10.1016/0043-1648(81)90368-9
Investigation of a laser scattering technique for the study of micropitting in test gears
D. C. Strachan (1981)
10.1299/jsme1958.20.1042
The Elastic and Plastic Components of Deflection of Model Asperities in the Shape of Parabolic Cusps
S hovelledR.E. (1976)
Scanning interferometer characterizes surfaces: Laser Focus World v
Connolly (1995)
IEEE, Piscataway, NJ, p
Atmosphere Sensing - Conference Proceedings (1995)
10.1016/0043-1648(79)90099-1
Analysis of the active profile of grinding wheel surfaces
W. Scott (1979)
Variations of friction in the roll bite and their effects on cold strip rolling: Iron & Steelmaker (I&SM), v
W.Y.D. Yuen (1996)
Kuriva, Use of the Beta-distribution for calculating the contact characteristic of Rough-bodies
V. V. Izmailov (1983)
Atomic roughness of steps of lr(001) layers: Surface Science v
Chen (1995)
10.1007/BF02282447
Generation of secondary instability modes in the interaction of a Tollmien-Schlichting wave with isolated roughness
Maxim Vladimirovich Ustinov (1995)
10.1016/0039-6028(96)00692-9
Characterization of surface morphology in epitaxial growth
Jacques G. Amar (1996)
Topology of Modified Helical Gears.
Faydor L. Litvin (1989)
10.1016/1359-6462(95)00581-1
Characteristic contact angles in the aluminium/vitreous carbon system
Karine Landry (1996)
10.1016/0043-1648(76)90061-2
Identification of grinding wheel wear using random process analysis
W. Scott (1976)
10.1080/10402009508983494
The effects of cylinder wall surface roughness and bore distortion on blow-by in automotive engines
M. Hennessy (1995)
10.1016/0890-6955(95)00065-8
Nose radius oblique tool: Cutting force and built-up edge prediction
Joseph A. Arsecularatne (1996)
10.1016/0043-1648(93)90521-M
Macroscopic and microscopic wear mechanisms in ultra-high molecular weight polyethylene
John Robert Cooper (1993)
SCALE AND ROUGHNESS EFFECTS IN SHIP PERFORMANCE FROM THE DESIGNER'S VIEWPOINT
Victor Mishkevich (1995)
10.1364/JOSA.44.000005
Use of Multilayer Films for Surface Topography Interferometry
J. A. Belk (1954)
10.1115/1.2830607
Evaluating Surface Roughness From Contact Vibrations
Daniel P. Hess (1995)
10.1016/0043-1648(86)90248-6
Optical measurement of the roughness of sinusoidal surfaces
Theodore V. Vorburger (1986)
10.1016/0020-7357(80)90024-4
Minimum zone evaluation of surfaces
T.S.R. Murthy (1980)
10.1080/00202967.1993.11870989
Laser treatment of zinc coated aluminium
Christos Panagopoulos (1993)
First-order phase statistics of Gaussian speckles produced in the diffraction field by ellipsoidal rough surfaces
Takeshi Nakamura (1995)
10.1016/0169-4332(93)90065-J
Some examples of depth resolution in SIMS analysis
Gilles Prudon (1993)
10.1016/0143-7496(95)91622-D
Fractals for fractured surfaces of adhesives under static and fatigue loadings
Kimiyoshi Naito (1995)
10.1002/sia.740210507
Depth profiling with sample rotation : capabilities and limitations
Siegfried Hofmann (1994)
10.1299/kikai1938.43.3893
In-Process Detection of Surface Roughness in Machining
Hiroshi Sekiguchi (1977)
10.1243/JMES_JOUR_1978_020_037_02
The Digital Measurement of Peak Parameters on Surface Profiles
David J. Whitehouse (1978)
10.2493/jjspe.60.245
Mirror-finish Slicing for Optical Device Endface.
Torahiko Kanda (1994)
10.1016/0017-9310(70)90126-2
Thermal contact resistance: The directional effect and other problems
T. R. Thomas (1970)
10.1117/12.140989
Characterization and measurement of localized surface quality
Lionel R. Baker (1993)
10.1016/S0007-8506(07)62196-9
On-the-Machine Measurement in EDM Process by a Calibration System with Polyhedra
Naotake Mohri (1994)
10.1002/(SICI)1096-9853(199601)20:1<1::AID-NAG799>3.0.CO;2-L
AN INTERFACE MODEL FOR ANALYSIS OF DEFORMATION BEHAVIOUR OF DISCONTINUITIES
Zenon Mróz (1996)
10.1243/PIME_PROC_1992_206_127_02
Identification of Surface Characteristics from Large Samples
Radovan Kovacevic (1992)
10.1109/48.289446
Rain measurement on buoys using hydrophones
J Forster (1994)
10.1016/0042-207X(93)E0064-R
Surface roughening resulting from ion irradiation of multilayered materials
Liudvikas Pranevičius (1995)
Manufacturing methods and manufacturing equipment: Welding
Schauder (1996)
Pt(110) surface studied by STM and RHEED: Surface Science, v
J. Kuntze (1996)
10.1007/BF00918825
Consideration of roughness of a surface over which flow occurs
E. A. Shkvar (1986)
10.1063/1.114935
Optical characterization of continuous compositional gradients in thin films by real time spectroscopic ellipsometry
Sangbo Kim (1995)
Ronnberg, Obtaining the topographical Image of a surface with the aid of a profilograph
A. Bengtsson (1986)
Visco-elastic approach to impact with friction: Impact, Waves, and Fracture American Society of Mechanical Engineers, Applied Mechanics Division
Ivanov (1995)
10.1115/1.2921659
A Fast Model for Pressure Profile in Rough EHL Line Contacts
Xiaolan Ai (1993)
Neue Dimensionen, Scanning force microscopy, roughness measuring new aspects of rating
Fries (1995)
10.1149/1.2056099
The Dependence of Photoetching n ‐ InP on Surface Preparation and Electrolyte Metal Ion Impurities
Theodore Douglas Lowes (1993)
10.2493/jjspe.58.1179
Fractal Analysis of Three-Dimensional Engineering Surface Irregularities.
N. Itoh (1992)
Analyzing field data for HazenWilliams and Darcy-Weisbach equations
Clark (1994)
10.1201/b17110-2
Contact mechanics
José Ramón Barberá (1999)
Model of an optical roughnessmeasuring instrument
Kiely (1992)
10.2514/3.389
Effect of Surface Material Properties and Surface Characteristics in Evaporative Spray Cooling
Maninder S. Sehmbey (1990)
10.1016/0043-1648(84)90027-9
The use of surface analysis techniques in the study of wear
William A. Glaeser (1984)
10.1306/BDFF8B32-1718-11D7-8645000102C1865D
Tilt and Drainage Ratio in Sedimentary Basins
Andrzej Pawel Radlinski (1993)
10.1016/0039-6028(95)00800-4
On the (absence of) surface melting in biphenyl
Wim H. de Jeu (1995)
10.1080/10402009408983315
Effects of 3-D Surface Topography on the EHL Film Thickness and Film Breakdown
Liming Chang (1994)
10.1115/1.3451381
The Influence of Surface Roughness on the Mechanism of Friction
Tadasu Tsukizoe (1970)
10.1299/jsme1958.1.86
Factors of Generating Surface Roughness in Cutting
Akira Iwaki (1958)
10.1615/JEnhHeatTransf.v2.i3.20
Pool Boiling of R-11 Refrigerant and Water on Oxidized Enhanced Tubes
Harris Eze Imadojemu (1995)
10.1557/PROC-366-231
Probing Surface Roughness and Porosity through Adsorption of Wetting Layers
Jacqueline Krim (1994)
Tribology theory versus experiment
John Ferrante (1987)
10.1149/1.1837003
Characterization of Proton‐Induced Color Transition in an Amorphous Tungsten Oxide Film
H. Rafla‐Yuan (1996)
10.1006/jsvi.1993.1086
Wheel-rail Noise Generation, Part V: Inclusion Of Wheel Rotation
David Thompson (1993)
10.1016/0924-0136(92)90283-X
An expert system for grinding process optimisation
G. J. Trmal (1992)
10.1063/1.115663
Effect of facet roughness on etched-facet semiconductor laser diodes
D.A. Francis (1996)
10.1016/0043-1648(95)90208-2
Theoretical and practical aspects of the wear of vane pumps Part A. Adaptation of a model for predictive wear calculation
R. Gellrich (1995)
10.2514/3.644
Heat transfer variation on protuberances and surface roughness elements
Robert W Henry (1995)
10.1016/0167-577X(93)90206-D
Studies on the behavior of the roughness of the fracture surfaces of silica glass
Rosaura Ham-Su (1993)
10.1016/0043-1648(93)90424-K
Measurement of surface roughness on rough machined surfaces using spectral speckle correlation and image analysis
Ulf A. Persson (1993)
Surface roughness effects in hydrodynamic and mixed lubrication : presented at the winter annual meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 16-21, 1980
Steve M. Rohde (1980)
10.1007/BF00270735
Effect of magnesia content on expansion, strength and roughness in dental ethyl silicate-bonded investment
Yoshio Nomura (1995)
10.1016/0141-6359(81)90003-9
An optical measurement of surface profile
Gary E. Sommargren (1981)
10.1088/0957-4484/7/1/002
Measurement of the roughness of supersmooth surfaces using a stylus instrument
James Garratt (1996)
Survey of non-destructive surface characterization methods used to insure reliable gate oxide fabrication for silicon 1C devices: Surface and Interface Analysis v
Diebold (1993)
Effects of surface roughness in elastohydrodynamic lubrication: JSME International Journal, Series 3, Vibration, Control Engineering, Engineering for Industry v
Kaneta (1992)
10.1016/0022-0248(94)00467-6
Growth and characterization of two-dimensional GaP on Si by metalorganic chemical vapor deposition
Tetsuo Soga (1995)
10.1061/(ASCE)1084-0702(1996)1:2(67)
DYNAMIC BEHAVIOR OF CONTINUOUS AND CANTILEVER THIN-WALLED BOX GIRDER BRIDGES
Tao Wang (1996)
Review of the workshop on WECS blade-surface roughness: Wind Energy American Society of Mechanical Engineers, Solar Energy Division
Berg (1994)
Fractal approach to the evaluation of surface roughness
J. Ondra (1990)
The Friction Coefficient Between Model Ice And Roughened Model Surface
Shujiro Kishi (1994)
Non-contact profile recording instrument
E. G. Thwaite (1980)
Replica techniques in the study of crankshaft journal topography: IMechE
F. A. Davis (1979)
Methodology of analyticexperimental- determination of friction surface micro-topographic parameters
Rudzit (1984)
IEEE, Piscataway, NJ, 5CH3482-7
Facilities (1995)
10.1116/1.588171
Vertical etching of thick SiO2 using C2F6‐based reactive ion beam etching
Achyut Kumar Dutta (1995)
10.1520/JTE10399J
Effects of finishing treatments on fabric friction
Jo Ajayi (1995)
On the real contact area of rough spheres: Soviet Journal of Friction Wear., V.6
A. Sviridenok (1985)
accommodation of misfit stresses: Journal of the American Ceramic Society, v
K. C. Khulbe (1996)
Studies of ion-beam modified 80
Zhang (1998)
Fibre optic reflectometers: Optics and Lasers in Engineering v
R. llvennoinen (1993)
Examining machined surfaces
J. Dyson (1954)
I.ST., Atomic structures of 6HSiC (0001) and (0001 over bar) surfaces: Surface Science, v
L. Li (1996)
Messverfahren zur beschreibung der oberflaeche mit hilfe des lasers. (Measurement Techniques for Describing Surfaces with the Aid of Lasers)
M. Abou-Aly (1977)
Methods of measuring surface roughness: Metallurgia
D. R. Gabe (1965)
Some factors affecting surface finish in grinding
R. S. Hahn (1966)
Testing of aspherical surfaces on a goniometer Sov
T. M. Leushina (1978)
A statistical model for engineering surfaces: Proc. of the Tribology Convention, Douglas
J. Hailing (1971)
Investigation of the method of intensifying heat transfer on the surface of dielectrics
E. B. Gerasimov (1995)
10.1007/BF01159843
AFM, SEM and XPS characterization of PAN-based carbon fibres etched in oxygen plasmas
Randolph J. Smiley (1993)
Workshop requirements of surface measurement
R. E. Reason (1967)
10.1016/0043-1648(92)90253-5
Static and dynamic friction processes under the influence of external vibrations
Thomas Skåre (1992)
The future of surface quality and surface geometry standards in the United States and abroad: S.M.E
E. J. Schneider (1975)
Transition boiling in natural convection systems
Auracher (1993)
Theoretical study of the Influence of surface roughness on the load capacity of a lubricant film
P. P. Usov (1984)
10.1016/0043-1648(76)90184-8
Methods of measuring and characterising the surface geometry of road stones
William Otho Yandell (1976)
10.1002/chin.199448011
Electrochemical Smoothing of Silicon (111).
Joerg Rappich (1994)
Nonstationary temperature field of discrete sliding contact of elastic bodies: Wear v
A. Yevtushenko (1994)
10.1364/AO.27.001518
Fractal surface finish.
E L Church (1988)
Bellingham, WA, p
International Society for Optical Engineering v. (1702)
Mechanism of surface layers fracture and formation of equilibrium roughness during friction process: Trenie i Iznos v
V. A. Ershov (1992)
Combined working of deep holes in articles made of yiscoplastic materials
V. A. Gorokhpv (1993)
10.1116/1.571826
Ion-beam-induced topography and surface diffusion
Raymond S. Robinson (1982)
10.1557/PROC-387-29
Emissivity of rough silicon surfaces: Measurement and calculations
Hongxing Xu (1995)
10.1016/0022-460X(72)90169-1
The dynamic response of elastic bodies in rolling contact to random roughness of their surfaces
Garnett G. Gray (1972)
10.1016/0043-1648(73)90138-5
Observations of steel surfaces under lubricated wear
Kichiro Endo (1973)
10.1016/S0007-8506(07)62261-6
Measurement of Surface Roughnesses and Topography at Nanometer Levels by Diffuse X-Ray Scattering
D. Keith Bowen (1994)
10.1016/0890-6955(94)90101-5
Description of honed cylinders surface topography
Jacek Michalski (1994)
10.1002/aic.690420427
Influence of wall roughness on the hydrodynamics in a circulating fluidized bed
Jiangfeng Zhou (1996)
10.1243/PIME_PROC_1987_201_123_02
Parameters for Characterizing the Surface Topography of Engineering Components
Ian Sherrington (1987)
10.1016/0257-8972(93)90013-E
Tribological behaviour of chemical vapour deposition diamond films on various cutting tools
T. H. Huang (1993)
On three-dimensional measurement of surface roughness
Anders K. H. Bengtsson (1991)
10.1016/0043-1648(72)90276-1
Considerations governing the contact between a rough and a flat surface
Ashok Uppal (1972)
10.1080/07038992.1993.10874545
Tillage effects on radar backscatter in southern Alberta
Donald J. Major (1993)
10.1007/978-94-011-7772-6
Atlas of Machined Surfaces
Ken J. Stout (1990)
REFLECTION OF LIGHT FROM THE SURFACE NEAR THE CRITICAL POINT
Vladimir L Kuzmin (1994)
10.1002/app.1992.070460508
Factors affecting the coefficient of friction of paper
Norayr Gurnagul (1992)
10.1016/0043-1648(96)07224-9
Angularity determination of abrasive powders
Ma Mariëtte Verspui (1996)
10.1016/0142-9612(96)87281-4
Influence of the surface structure of titanium materials on the adhesion of fibroblasts.
Eva Eisenbarth, (1996)
10.1243/PIME_PROC_1986_200_149_02
A Comparison of Orthogonal Transforms in Their Application to Surface Texture Analysis
D. J. Mulvaney (1986)
10.1524/teme.1992.59.10.389
Suppression of stochastically placed, straight toolmarks to enhance objects and defects / Unterdrückung von stochastisch plazierten, geraden Riefen zur Hervorhebung von Objekten und Defekten
Jürgen Beyerer (1992)
10.1557/PROC-399-89
Kinetic Roughening of Fe/Fe(100) Epitaxial Thin Films
Maria C. Bartelt (1995)
10.1016/0043-1648(82)90188-0
Hydrodynamic drag versus roughness for rotating disks
Theodore V. Vorburger (1982)
10.1080/05698196708972179
The Measurement of Surface Roughness and Profiles on Metals
Roderick Gerald Quiney (1967)
10.1007/BF00978988
Investigating the microgeometry of the surface of monocrystalline acoustic lines
L. N. Logacheva (1970)
10.1007/BF02325714
Influence on fiber inclination and interfacial conditions on fracture in composite materials
Sanjeev K. Khanna (1994)
10.1177/002199839402800905
Solid Particle Erosion of Thermoplastic Resins Reinforced by Short Fibers
Noriyuki Miyazaki (1994)
10.1115/1.3101928
Contact Mechanics of Rough Surfaces in Tribology: Single Asperity Contact
Bharat Bhushan (1996)
10.1021/la00032a016
Surface morphology and the response of the thickness-shear mode acoustic wave sensor in liquids
Mengsu Yang (1993)
10.1016/0043-1648(74)90077-5
Plastic replicas for optical and scanning electron microscopy
Sören Andersson (1974)
Bubble model of pulse breakdown in liquids
Sergey M. Korobeynikov (1992)
10.1364/JOSA.69.000031
Relation between the angular dependence of scattering and the statistical properties of optical surfaces
James Merle Elson (1979)
10.1021/ma00081a020
Evolution of order in thin block copolymer films
Anne M. Mayes (1994)
10.1016/0043-1648(95)06898-8
Comparative wear mapping techniques. I. Friction and wear mapping of tungsten carbide/silicon carbide
Jeffrey R. Alcock (1996)
10.1016/0043-1648(73)90023-9
Deformation of single and multiple asperity models of modelling clay
Ashok Uppal (1973)
10.1016/0167-6105(92)90443-E
Model study of the development of boundary layers above urban areas
Wolfgang Theurer (1992)
10.1016/0010-4361(91)90554-T
Topography of carbon fibre surfaces
Pamela A Marshall (1991)
TBM tunnel friction values for the Grizzly Powerhouse Project
Robert D. Stutsman (1995)
10.1016/S0257-8972(05)80008-8
Initial stages of development of the surface topography induced by ion bombardment
Liudvikas Pranevičius (1994)
10.1016/S0191-8141(96)80031-9
Formation of voids and veins during faulting
Stephen R. Brown (1996)
10.1016/0022-1694(94)05092-C
The Crau field experiment: turbulent exchange in the surface layer under conditions of strong local advection.
L. J. M. Kroon (1995)
10.1017/S002211209600050X
Gravity granular flows of slightly frictional particles down an inclined bumpy chute
Jianfa Cao (1996)
10.1121/1.395803
Comparison of the Rough Surface Reflection Coefficient with Specularly Scattered Acoustic Data.
A. R. Miller (1987)
10.1115/1.3184478
A Method to Measure Contact Pressure Between Metallic Surfaces by Changes in Surface Roughness
Shinsuke Kato (1981)
10.1121/1.395165
Acoustic scattering from an arbitrarily rough surface
B. J. Kachoyan (1987)
Technique for full surface examination of small spheres in the scanning electron microscope
C. M. Ward (1978)
10.1016/0030-4018(95)00666-4
Contrast variations in white-light speckle interferometry with application to 3D profilometry
A. Lulli (1996)
10.1116/1.579380
Flux dependence of in situ electron transport in Ag/Si(111)
Kevin R. Kimberlin (1995)
10.1016/0043-1648(84)90153-4
Numerical filtering used in microtopographical surface measurement
M. Chuard (1984)
Comparison of 2D and 3D Models for Computing Shallow Water Tides in a Friction-Dominated Tidal Embayment
Roger R. Grenier (1994)
10.1016/0043-1648(76)90053-3
Observation of surface profiles and the nature of the contact between polymer films by multiple beam interferometry
Keiji Ohara (1976)
10.2118/22867-PA
Effects of Nonstandard Operating Conditions on the Accuracy of Orifice Meters
Ven C. Ting (1993)
10.1007/BF01121727
Metrological provision for surface roughness measurement
V. S. Luk’yanov (1975)
10.1243/PIME_PROC_1967_182_026_02
First Paper: Sliding Friction between Lubricated Rollers
J. A. Jefferis (1967)
10.1115/1.3261575
Static friction coefficient model for metallic rough surfaces
Wen Rui Chang (1988)
10.1088/0150-536X/11/5/005
Contribution of immersion technique to light scattering analysis of very rough surfaces
Pietro Croce (1980)
10.1016/0890-6955(94)00063-P
A new technique to characterize and predict laser cut striations
Paul Di Pietro (1993)
10.1016/0924-0136(94)01440-C
High-speed milling in tooling production
Jukka Paro (1995)
10.1016/0254-0584(94)01426-H
Surface morphology and optical properties of ZnS:In films
Bikas Maiti (1995)
10.1117/12.130736
Replicated optics in the production of "supersmooth" surfaces
Kenneth E. Tapp (1992)
10.1016/0038-1098(95)00823-3
Temperature quenching of excitons in resonant elastic light scattering from rough surfaces of crystals
Vladimir A. Kosobukin (1995)
10.1007/BF02669869
Micromechanics of shear ligament toughening
Kwai S. Chan (1991)
10.1016/0043-1648(79)90141-8
The direct measurement of the power spectrum of rough surfaces by optical fourier transformation
E. G. Thwaite (1979)
10.1016/0042-207X(87)90110-2
Depth resolution of multilayer Cr/Ni thin film structures deposited on substrates with different roughness
Anton Zalar (1987)
10.1007/BF00193908
Determining surface roughness and displacement height
Charles R. Stearns (1970)
10.1007/BF00608621
Specific features of strain measurement in composite materials
Ludmilla P. Tairova (1993)
10.1117/12.7974177
Frequency Response Characteristics Of A Mechanical Surface Profilometer
Ghanim A. Al-Jumaily (1987)
10.1016/0921-5093(95)09805-4
Influence of surface condition on the fatigue of an aluminum-lithium alloy (2090-T3)
Ali Eftekhari (1995)
10.1016/0043-1648(94)06537-3
The friction and wear of automotive grey cast iron under dry sliding conditions Part 1-relationships between wear loss and testing parameters
Mircea Terheci (1995)
10.1016/0020-7357(78)90002-1
The ratio of axial to lateral stiffness, a quality parameter for stylus surface profile tracing instruments
J M Verkerk (1978)
Objektive Glanzbeurteilung Ebener Oberflaechen.(Objective Gloss Estimation of Plate Surfaces): Ind.Anz
K. H. Moeller (1977)
A re-evaluation of surface finish: A.S.M.E
L. Chaney (1954)
Zur problematik der oberflachennormung (problems of surface standardization)
H. von Weingraber (1975)
In-situ reflectivity measurements during pulsed-laser deposition of Bi//2Sr//2CaCu//2O//8// plus // delta: Applied Surface Science, v
Ritzer (1996)
ON THE CALCULATION OF INTERNATIONAL ROUGHNESS INDEX FROM LONGITUDINAL ROAD PROFILE
Michael W. Sayers (1995)
10.1016/0039-6028(95)00060-7
The structure of dense sulphur layers on Ru(0001) II. The (√7 × √7) R19.1° structure
W. Sklarek (1995)
Enamel and hydrocolloide dental replica surfaces, Part 1. Statistical characterisation of enamel topography
T. G. Mathia (1989)
Thermal conductance of elastic contact of rough surfaces in vacuum
V. M. Schcavelin (1986)
Determination of the direct and indirect 31
M. S. Selvam (1998)
Surface microprofile measurements by diffraction of a strong focused laser beam: Pribory i Sistemy Upravleniya no. 1 Jan-Feb
A. F. Rezchikov (1993)
Surface roughness measurements over long scan lengths
T. C. Bristow (1988)
10.1016/0043-1648(73)90132-4
Some aspects of surface roughness measurement
P. Ranganath Nayak (1973)
Fractal surface characterization 121
Bozhevolnyi (1998)
Multifractals and mixed fractals: Journal of Computer-Assisted Microscopy
J. C. Russ (1991)
Effect of router tool wear on AE count rate: Zairyo/Joumal of the Society of Materials Science, Japan, v
Cyra (1996)
Features of manufacturing automobile wheel disks from silumin by low-pressure casting
V. V. Mel'nikov (1994)
Mathematics of motif combination and their use for functional simulation: International Journal of Machine Tools & Manufacture v
Scott (1992)
Effect of surface roughness on scoring - 2. Under flooded lubricating conditions
Yamamoto (1979)
Raschyet koeffits ientov treniye pri epregoplasticheskikh deformatsiyakh
N. N. Kuz'min (1985)
An analysis of distribution
Y. Kimura (1966)
Measuring matching wear scars on balls and flats
E. P. Whitenton (1989)
10.1149/1.2777972
On the Determination of the Roughness of Metallic Surfaces
C. Kenyon Wagner (1950)
10.1117/12.957451
Role Of Surface Topography In X-Ray Scattering
Eugene L. Church (1979)
10.1116/1.1318703
Ultrahigh vacuum system for the study of the mechanical and electrical properties of metallic surfaces
Robert E. Cuthrell (1974)
10.1016/0043-1648(90)90193-E
Fractal characteristics of rubber wear surfaces as a function of load and velocity
Peter R. Stupak (1990)
10.1080/00221689209498914
Extended data on sediment transport in rigid bed rectangular channels
Chandra Nalluri (1992)
10.1016/0141-6359(81)90069-6
Determination of flatness from straightness measurements and characterization of the surface by four parameters
Johan Meijer (1981)
10.1299/jsme1958.2.29
On the Influences of the Finishing Condition of the Surface of Metallic Plate upon the Abrasion of Metals to the Fluid with Sand Particles
Sadaji Yamasita (1958)
10.1016/0921-4534(94)02378-6
Homoepitaxy of thin films using YBa2Cu3O7−x single-crystal substrates
Hiroyuki Sakai (1995)
Estimation of regional heat flux from scanning radiometer measurements
T. Dale Bess (1977)
10.2514/3.24107
Boundary-layer tripping by a roughness element
Jamal A. Masad (1996)
10.1016/0030-4018(93)90695-2
Backscattering enhancement from a conducting surface with isotropic roughness
Michael E. Knotts (1993)
10.1016/0043-1648(81)90260-X
Surface roughness effects on heat transfer in Couette flow
Gerard G. Elia (1981)
10.1016/0169-4332(95)00539-0
Selection of kinetic energy of laser ablated particles
Kanji Kuba (1996)
10.1016/0043-1648(75)90149-0
Tool vibration and its influence on surface roughness in turning
M. S. Selvam (1975)
10.1016/0039-6028(94)00737-3
Buckled layer structure for atomic adsorption on W{100}: the (√2 × √2)R45° nitrogen structure from ATLEED
M. P. Bessent (1995)
10.1016/0043-1648(75)90074-5
The influence of surface roughness on wear
Raymond G. Bayer (1975)
10.1073/pnas.93.10.4600
Mapping leaf surface landscapes.
Wendy L. Mechaber (1996)
10.1016/0043-1648(77)90149-1
Effects of surface roughness and surface films on contact resistance
Terumasa Hisakado (1977)
Material Representations and Algorithms for Nanometer Lithography Simulation (Special Issue on 1993 VLSI Process and Device Modeling Workshop (VPAD93))
Edward W. Scheckler (1994)
Feinwerktech, Topographical representation of surface
F. Zilling (1987)
Milling cutter runout compensation by control of radial depth of cut: Flexible Automation
Liang (1992)
The statistical geometry of random surfaces
M. S. Longuet-Higgins (1962)
In situ TEM observations of surfactant128
H. Minoda (1998)
The effect of electrodischarge machining on the surface integrity and mechanical properties of an alloy steel
I. Strode (1988)
Ribbing, Determination oT the SJO2/SI Interface roughness by diffuse reflectance measurements
A. Roos (1988)
Some methods of measuring surface topography as applied to stretcher-strain markings on metal
W.H.L. Hooper (1952)
10.1016/0043-1648(79)90147-9
The digitization of surface profiles
Derek G. Chetwynd (1979)
10.1109/20.490248
Experimentally observed roughness effects on the air bearing in the pseudo-contact spacing regime
Michele Donovan (1995)
10.1016/0141-6359(81)90038-6
Optical techniques for on-line measurement of surface topography
Theodore V. Vorburger (1981)
10.1109/OCEANS.1995.528715
Cross-polarized power returned from a random surface: application to the rough sea surface
O. Airiau (1995)
10.1007/BF01083952
James Clerk Maxwell, the first quantitative geomorphologist?: Discussion
David M. Mark (1982)
Surface structure of latex films, varnishes, and paint films studied with an atomic force microscope
Hans-Jürgen Butt (1995)
10.1016/0039-6028(94)00811-6
Dynamical electron scattering from growing surfaces
Sergei L Dudarev (1995)
10.1016/0043-1648(81)90322-7
Microtexture roughness effect on predicted road-tyre friction in wet conditions
Pichai Taneerananon (1981)
10.1038/172169b0
Elastic Deformation and the Laws of Friction
Bert H. Lincoln (1953)
10.1016/0043-1648(86)90260-7
Modification of a surface profile's height parameters during strip drawing
Jürgen von Stebut (1986)
10.1016/0017-9310(95)00267-7
Transient heat transfer from surfaces of defined roughness into liquid nitrogen
Volker Drach (1996)
10.1088/0950-7671/28/7/306
An instrument for automatically recording waviness of surfaces
C W Medhurst (1951)
10.1117/12.146265
Breakdown analysis of multilayer amorphous silicon photoreceptors
Jian Liang Hu (1993)
10.1115/1.3261869
Hertzian Contact of Ground Surfaces
David Nowell (1989)
10.1063/1.1146162
X‐ray supermirrors for BESSY II
Alexei Erko (1995)
10.1016/S0007-8506(07)61280-3
Predicting microcontact spots size distribution in contact problems
T. Klimczak (1992)
10.1117/12.130720
Roughness evolution of optical materials induced by ion-beam milling
Charles Egert (1992)
10.1016/0925-3467(95)00026-7
Surface roughness effects in ellipsometry: comparison of truncated sphere and effective medium models
Daniel Rönnow (1995)
10.1007/BF00832538
Reflectometric roughness measurement for ultrasmooth surfaces
F. M. Solodukho (1983)
10.1016/0040-6090(95)08028-7
Microstructural investigations of a textured black brass selective surface
Purnima Richharia (1996)
10.1175/1520-0450(1994)033<0140:ASTMFM>2.0.CO;2
A Statistical-Topographic Model for Mapping Climatological Precipitation over Mountainous Terrain
Christopher Daly (1994)
10.1080/10402009208982180
Influence of Surface Roughness Skewness on Rolling Contact Fatigue Life
Yoshinobu Akamatsu (1992)
10.1016/0043-1648(76)90109-5
A study of the surface parameters of ground and lapped metal surfaces, using specular and diffuse reflection of laser light
Lawrence H. Tanner (1976)
10.1115/1.2920892
A numerical model for the contact of layered elastic bodies with real rough surfaces
Samuel J. Cole (1992)
10.1116/1.569034
Evaluation of surface roughness of metal films by transmission electron microscopy and ellipsometry
E. C. S. Chan (1976)
10.1016/0043-1648(94)90173-2
Mechanics of Fretting Fatigue
David A. Hills (1994)
10.1006/jcis.1994.1044
Effect of surface roughness on the morphology of calcite crystallizing on mild steel
Shani Keysar (1994)
10.1016/0040-6090(94)90070-1
Characterization of obliquely deposited tungsten/silicon multilayers
Eva Majková (1994)
10.1115/1.3261463
On Random Reynolds Roughness
Roger F. Gans (1987)
10.1016/0043-1648(81)90014-4
Application of a relocation technique to the study of surface production in electrochemical machining and electrodischarge machining
Venkataraman Radhakrishnan (1981)
Evaluation of surface finish
Y. R. Vitenberg (1969)
A review of surface texture
E. Green (1967)
Singlepoint machining technology of a supersmooth surface using a flying tool: Nanotechnology v
Enpmoto (1992)
Taper sectioning, A method for the examination of metal surfaces
E. Rabinowicz (1950)
The equation of the mean line of surface texture found by an electric wave filter: Rank Precision Industries
D. J. Whitehpuse (1965)
Predicting flash temperature at microcontacts
J. I. McCool (1988)
A preliminary investigation on the condition of the grinding wheel surface by air flow measurements
V. Radhakrishnan (1977)
Developing a haze and microroughness reference standard: MICRO, v
Scheer (1996)
IEEE, Piscataway, NJ, 5TH8015
Microwave Earth (1995)
Traction in rough elastohydrodynamic contacts: Surf Roughness Eff in Hydrodyn and Mixed Lubr
Nemiekar (1980)
Influence of surface waviness and roughness parameters on friction and wear
Y. Ivanzov (1987)
Model experiments of wet pressing
Norman (1995)
Tooth Surface Roughness Tested with the Arithmetic Base Circle
Sukehire (1976)
10.1063/1.1142244
Improved scanning ion‐conductance microscope using microfabricated probes
Craig Prater (1991)
10.4271/910511
Effects of bead surface preparation on friction in the drawbead test
Gregory M. Dalton (1991)
10.1016/0043-1648(81)90349-5
A conversion method from the E system to the M system in measuring surface roughness
Hiroyuki Ishigaki (1981)
10.1109/SOI.1995.526515
Final polish for SOI wafers-surface roughness and TTV degradation
Gotz Pfeiffer (1995)
10.1016/0025-5416(69)90027-5
Registration and mapping of plastically deformed metal surfaces by means of photoelectrons
C. C. Veerman (1969)
10.1115/1.2920974
Application of Average Flow Model to Thin Film Gas Lubrication
Takayuki Makino (1993)
10.1016/0043-1648(78)90199-0
Surface density of asperities and real distribution of asperity heights on rubbed surfaces
Kunio Yamada (1978)
10.1109/48.219529
Reverberation fluctuations from a smooth seafloor
Steve Stanić (1993)
10.1016/0038-1098(93)90796-P
Influence of the substrate morphology on porous silicon formation
Girolamo Di Francia (1993)
10.1007/BF00247785
Mass transfer at rough gas-sparged electrodes
G. H. Sedahmed (1994)
10.1016/0304-3991(92)90494-5
Probe characterization for scanning probe metrology
David A. Grigg (1992)
10.1029/94JB03262
Simple mathematical model of a rough fracture
Stephen R. Brown (1995)
10.1109/61.400827
Role of the size of particles of alumina trihydrate filler on the life of RTV silicone rubber coating
Hui Deng (1995)
10.1109/27.491701
Hydrogen collision dynamics on a rough nickel surface
David N. Ruzic (1996)
10.1117/12.225300
Application of hot-pressed silicon carbide to large high-precision optical structures
C. James Shih (1995)
10.1016/0043-1648(88)90016-6
A new three-dimensional non-contact digital optical profiler
Bharat Bhushan (1988)
10.1002/er.4440180304
A two-point method for turbulent pipe flow measurements
Fu Wen (1994)
10.1016/0043-1648(94)90106-6
Rise in fatigue strength of Ti by extremely mild abrasive processing
Seiki Watanabe (1994)
10.1115/1.3251583
Micropitting in Hertzian Contacts
D. Berthe (1980)
10.1016/0141-6359(85)90088-1
Analysis of light scattering by rough manufactured surfaces
C. Lukianoqicz (1985)
10.4028/www.scientific.net/MSF.175-178.287
Fractal Studies on the Positron Annihilation in Metals
C. W. Lung (1994)
10.1016/0378-4371(96)00013-1
Reentrant oscillation in kinetic thin-film deposition
Rongfu Xiao (1996)
10.1117/12.140363
Electro-optical information processing for optical heterodyne interferometry profilometer
Tao Chen (1992)
The generation of pressure between rough, fluid lubricated, moving, deformable surfaces: Lubr.Engng
M. G. Davies (1963)
Practical aspects of surface finish measurement instrumentation
J. A. Broadston (1947)
Contact vibrations: J.Sound
P. R. 1972. Nayak (1972)
Influence of surface roughness on normal-sliding lubrication: Tribology International v
Lundberg (1995)
Characterizing and modeling fractal surfaces: Journal of ComputerAssisted Microscopy
J. C. Russ (1992)
ASCE, New York
Management (1993)
10.1016/0043-1648(81)90269-6
Effects of cartilage roughness on the lubrication of human joints
P. N. Tandon (1981)
Named, Tribology parameter prediction: Wear
D. J. Whitehouse (1979)
Three dimensional model of contact surface: Zagadienia Eksploatacji Maszyn, Zeszyt
B. Nowicki (1983)
Modem approach to design of grassed channels: Journal of Irrigation and Drainage Engineering v
N. Kouwen (1992)
Testing the precision of electric
E. Bickel (1960)
Surface features influencing the effectiveness of lip seals, a pattern - recognition approach: S.M.E
T. R. Thomas (1975)
Pressure-shear plate impact experiment for investigating transient friction: Experimental Mechanics v
Prakash (1995)
A new method for surface reproduction
K. B. Mather (1949)
Tracer-point sharpness as affecting roughness measurements
D. E. Williamson (1947)
The scattering of electromagnetic waves from rough surfaces
André Spizzichino (1963)
Chra-Chung, Machinability of SiC particle reinforced aluminum alloy composite material: Keikinzoku/Journal of Japan Institute of Light Metals v
Yan (1993)
New model for interface failure in fibre-reinforced polymers: Composites
M. R. Piggptt (1995)
Changes of surface properties In rolling/sliding contact during running-in process
Y. Yamamoto (1985)
A new evaluation of surface finishes
W. F. Klemm (1945)
What can we learn from offspecular neutron reflection?: Neutron Scattering in Materials Science II, Materials
Pynn (1995)
Study of friction and wear characteristics of copper- and iron-based sintered materials: Wear v
Kang (1993)
10.1080/10402009608983508
Effect of Roughness on the Behavior of Squeeze Film in a Spherical Bearing
J. L. Gupta (1996)
10.1007/BF00611557
Investigation of the influence of the microstructure on the scattering properties of a complex rough surface
O. K. Taganov (1979)
10.1016/0034-4257(92)90072-R
Modeling spectral and bidirectional soil reflectance
Stéphane Jacquemoud (1992)
10.1115/1.3453329
Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces
Nadir Patir (1979)
10.1016/0022-1694(93)90171-5
The Prairie Blowing Snow Model: characteristics, validation, operation
John W. Pomeroy (1993)
10.1016/0043-1648(94)90171-6
The steady state sliding of rough surfaces
Ajay Kapoor (1994)
10.2118/30987-MS
Effects of Wall Slip and Shear-Induced Transition on the Viscosity Measurements of Crosslinked Fracturing Fluids
Yong Fan (1995)
An assessment of anisotropic properties in three-dimensional asperities
Tokuaki Tsukada (1983)
Effect of grain size on wire electrical discharge machining of polycrystalline diamond
Sheng Ze Wang (1993)
10.1149/1.1836951
Nonparticulate Origins of Light Point Defects on Polished Silicon Wafers
James Shen (1996)
10.1109/36.406676
Inferring snow wetness using C-band data from SIR-C's polarimetric synthetic aperture radar
Jiancheng Shi (1995)
10.1557/JMR.1992.1769
Tribological characteristics of polycrystalline diamond films produced by chemical vapor deposition
Masao Kohzaki (1992)
10.1061/(ASCE)0733-9437(1992)118:6(914)
VELOCITY DISTRIBUTION INSIDE AND ABOVE BRANCHED FLEXIBLE ROUGHNESS
Omnia El‐Hakim (1992)
10.1088/0022-3735/8/6/026
Diffraction grating ruling tool alignment by analysis of traced groove profile
John F. Verrill (1975)
10.1016/0043-1648(77)90200-9
The influence of surface roughness on abrasive wear
Terumasa Hisakado (1977)
10.1016/0039-6028(96)00583-3
Steps and facets on annealed LaAlO3{100} and {110} surfaces
Zhong Lin Wang (1996)
Certain regularities of elastic sphere force contact with the elastoplastic half-space
M. S. Drozd (1995)
10.1243/JMES_JOUR_1962_004_005_02
Effect of Metallic Contact on the Pitting of Lubricated Rolling Surfaces
Peter H. Dawson (1962)
Surface roughness measurement of metals using microwave
Ding (1993)
Optical Inspection of Ground Metal Surfaces: Electro
Kern (1978)
An analysis of contacting the rough surfaces with full contact consideration
O. G. Chekina (1995)
Surface examination
J. S. Halliday (1955)
Modélisation du contact rugueux élastoplastique
Cyril Mayeur (1995)
10.1016/0043-1648(79)90135-2
Progress in the appraisal of surface topography during the first half-century of instrument development☆
R. E. Reason (1979)
The Aerodynamic Properties of a Roughened Cone
Richard G. J. Flay (1995)
10.1177/004051759306300904
Evaluating Carpet Appearance Loss: Surface Intensity and Roughness
Behnam Pourdeyhimi (1993)
10.1109/36.297987
Active and passive microwave signature catalog on bare soil (2-12 GHz)
Urs Wegmüller (1994)
10.1016/S0007-8506(07)62168-4
Characterization of Manufacturing Processes Based upon Acoustic Emission Analysis by Neural Networks
I. Grabec (1994)
10.1016/0045-7949(93)90383-O
Parametric Study of Cable-Stayed Bridges Response Due to Traffic-Induced Vibration
Magdi A. Khalifa (1993)
10.1088/0022-3727/24/11/030
Numerical simulation of friction between contacting rough surfaces
Jill Audrey Ogilvy (1991)
10.1080/05698198508981625
Temperature Analysis in Lubricated Simple Sliding Rough Contacts
Wen Ter Lai (1985)
10.1016/0042-207X(94)90254-2
A scanning tunnelling microscopy study of thin gold films evaporated on silicon
Azzadine Hammiche (1994)
10.1016/0020-7683(94)00168-V
Evolution of waviness on the surface of a strained elastic solid due to stress-driven diffusion
L. B. Freund (1995)
10.1016/0043-1648(79)90104-2
Two-dimensional random surface model for asperity-contact in elastohydrodynamic lubrication
John J. Coy (1979)
10.1002/app.1994.070521213
Surface modification of UHMWPE fibers
Michael Stephen Silverstein (1994)
Experimental Statistical Study of the Motion of a Particle on a Rough Surface
Alejandra Aguirre (1995)
10.1063/1.1728372
Single Contacts and Multiple Encounters
J. F. Archard (1961)
10.1557/PROC-407-239
Kinetic Roughening of Quenched Xenon Films
Ralf K. Heilmann (1995)
10.1016/0039-6028(94)00853-1
Electronic structure of the laser-annealed Si(111)1 × 1 surface
Helmut Öfner (1995)
10.1109/20.490175
Developments and advances in thin layer particulate recording media
S. Saitoh (1995)
10.1016/0148-9062(79)90241-9
Estimating joint roughness coefficients
R. Tse (1979)
10.1243/PIME_PROC_1985_199_078_02
Assessment of Surface Finish Profiles Produced by Multi-Process Manufacture
David J. Whitehouse (1985)
10.1049/ipej:19540032
The trend of surface measurement
R. E. Reason (1954)
10.1016/0043-1648(77)90008-4
The study of machined surface roughness by random analysis
M. S. Selvam (1977)
10.1016/0148-9062(93)91433-j
Hand-held velocity probe for rapid outcrop and core characterization
Michael Lee Batzle (1992)
10.1006/jsvi.1996.0248
Railway noise : The physics of airborne sound generation and propagation
Paul De Vos (1996)
10.1016/0167-9317(95)00212-X
Fabrication of waveguide tapers by semitransparent mask photolithography
J. Wengelink (1996)
10.1016/0257-8972(94)02395-6
Hardness evaluation of thin ceramic coatings on tool steel
Fouad Attar (1996)
10.1016/0960-1481(96)88836-7
Fractal community tissue: Differentiating the energy harvest through self-similar urban form
Robert Koester (1996)
10.1163/156856194X00528
Nanoscale deformations of polyimide with a force microscope
J. A. Lin (1994)
Study of Friction Factors in the Upper Reaches of the Rio Grande
Cassie C. Klumpp (1994)
10.1016/0017-9310(93)80051-U
Natural convection heat transfer in enclosures fitted with a periodic array of hot roughness elements at the bottom
Md. Ruhul Amin (1993)
10.1177/004051759206201009
RotorRing Measurement of Fiber Cohesion and Bulk Properties of Staple Fibers
Subhas Ghosh (1992)
10.6028/jres.036.019
A glossmeter for smoothness comparisons of machine-finished surfaces
Richard S. Hunter (1946)
10.1016/0022-1694(94)90162-7
Application of fracture-flow hydrogeology to acid-mine drainage at the Bunker Hill Mine, Kellogg, Idaho
Thomas E. Lachmar (1994)
10.1016/0141-6359(81)90043-X
Characterization of surface roughness
Thomas Ronald Thomas (1981)
10.1117/12.231082
Ray tracing from two-dimensional randomly rough surfaces
Neil C Bruce (1996)
10.1016/0020-7357(86)90196-4
Surface roughness and measurement with new contact methods
Bogdan Nowicki (1986)
10.1088/0022-3727/8/1/013
Contact electrification of metals
Jane Lowell (1975)
10.1115/1.2817293
On the effect of surface roughness on the vapor flow under Leidenfrost-levitated droplets
Marc Prat (1995)
10.1016/0042-207X(95)80053-0
Studies of the grain boundary effect in electrodeposited cadmium telluride films from optical measurements
Joydeep Dutta (1995)
10.1016/0921-4526(94)90721-8
3He-B in a thin film: A comparison of boundary conditions
Louis J. Buchholtz (1994)
10.1109/MEMSYS.1996.493990
Low strain sputtered polysilicon for micromechanical structures
Takeshi Abe (1996)
10.1524/teme.1983.50.jg.233
Optisches Verfahren zur Bestimmung der Oberflächenrauheit / Optical procedure for surface roughness determination
R.-J. Ahlers (1983)
10.1243/JMES_JOUR_1978_020_035_02
The Generating Mechanism of Surface Roughness by Random Cutting Edges
Motoyoshi Hasegawa (1978)
10.1016/0030-4018(78)90305-X
Transition radiation from rough surfaces
Detlef Heitmann (1978)
10.1016/S0007-8506(07)62398-1
Development of an advanced tool-setting device for diamond turning
Mariko Sawa (1993)
10.1016/0039-6028(95)00338-X
Enhanced inverse photoemission by hot electrons at strongly charged silver surfaces
H A Janssen (1995)
10.1557/PROC-383-319
Friction and Wear of Amorphous Hydrogenated Carbon
Susan L. Heidger (1995)
10.1121/1.1903240
Theory and construction of multivariate Gaussian surfaces
Luise S. Schuetz (1973)
10.1088/0022-3727/13/9/009
Determination of surface roughness from scattered light measurements
Franz. U. Hillebrecht (1980)
10.1016/0041-2678(73)90242-X
Characteristics of a surface machined with a single point tool
M. S. Selvam (1973)
10.1364/AO.20.000610
Optical heterodyne profilometry.
Gary E. Sommargren (1981)
10.1557/JMR.1995.2503
Measurement of surface topography and area-specific nanohardness in the scanning force microscope
Detlef Scholl (1995)
10.1117/12.130626
Supermirror neutron guide coatings
Charles F. Majkrzak (1992)
10.1063/1.1723395
On Asperity Distributions of Metallic Surfaces
Frederick F. Ling (1958)
10.1364/AO.18.000796
Surface roughness measurements with an optical Fourier spectrum analyzer.
Benjamin J. Pernick (1979)
10.1016/0043-1648(95)06848-1
Tribological investigation of textile fabrics
Marie-Ange Bueno (1996)
10.1016/0167-6105(92)90453-H
An æolian geographical informative system for civil engineering
Vittorio Gusella (1992)
10.1016/0148-9062(93)91885-m
Modeling flow in non-homogeneous rock joints using the integral transform method
Bernard Amadei (1992)
10.1016/0301-679X(95)00017-X
Relationship of surface slope distributions to the wear mechanisms of ceramics
Jeffrey R. Alcock (1995)
10.1016/0257-8972(95)02544-8
An a.c. impedance study on PVD CrN-coated mild steel with different surface roughnesses
Changqing Liu (1995)
10.1080/05698197508982757
Dependence of Bearing Fatigue Life on Film Thickness to Surface Roughness Ratio
Jing Yi Liu (1975)
10.1038/165342d0
Journal of the Optical Society of America
(1950)
An inprocess tool proximity sensor for ultra-fine machining
A. E. Gee (1988)
Effect of surface topography on the electrode-electrolyte interface impedance.Part 3. The fractal approach
E. T. McAdams (1990)
10.1016/S0007-8506(07)62477-9
The new method of free form surface honing
Bogdan Nowicki (1993)
surface roughness on elastohydrodynamic traction
J. Howard (1987)
10.1557/PROC-391-217
Material Properties of Coherent Tin Films
Ken Ngan (1995)
Modelling whole-life pavement performance
Andy Collop (1995)
Bearings systems principles and practice: Oxford University press, UK
F. T. Barwell (1979)
10.1080/00423119608969231
The In-Plane Dynamics of Tyres on Uneven Roads
Peter Zegelaar (1996)
10.1007/BF01577607
SPA-LEED studies of growth of Ag on Ag(111) at low temperatures
E. Z. Luo (1995)
10.1016/0043-1648(82)90324-6
The deformation of rough cylinders compressed between smooth flat surfaces of hard blocks
H. Mccallion (1982)
10.1016/0040-6090(95)06994-1
Wetting studies of molecularly engineered surfaces
Abraham Ulman (1996)
10.1021/ac00114a032
Influence of compressional wave generation on thickness-shear mode resonator response in a fluid
T. Schneider (1995)
10.1016/0043-1648(83)90215-6
Microcontinuum analysis of squeeze films between rough surfaces
Prawal Sinha (1983)
10.1557/s0883769400035284
Heteroepitaxy and Strain: Applications to Electronic and Optoelectronic Materials
Leo J. Schowalter (1996)
Three Dimensional Characterisation of Engineering Surfaces
Nirwan Idrus (1977)
New ideas concerning aircraft icing forecast
Werner Fuchs (1994)
10.1109/36.175345
Rough-sea microwave emissivities measured with the SSM/I
Philip W. Rosenkranz (1992)
10.1016/S0022-0248(07)80045-5
Solid source MOCVD for the epitaxial growth of thin oxide films
Zhiping Lu (1993)
10.1109/36.406677
Measuring soil moisture with imaging radars
Pascale C. Dubois (1995)
10.1016/0021-9290(95)00062-3
Relative friction minimization in fixed orthodontic bracket appliances.
Volker Schlegel (1996)
10.1016/0020-7683(94)00241-N
Fractal models of elastic-perfectly plastic contact of rough surfaces based on the Cantor set
Thomas L. Warren (1995)
10.1016/0039-6028(95)00992-2
Surface roughening and metastable superstructures on wet-processed Si(111) surface induced by hydrogen desorption
Tadahiro Komeda (1996)
10.2514/3.632
Thermal contact resistance between balls and rings of a bearing under axial, radial, and combined loads
Katsuhiko Nakajima (1995)
10.1098/rspa.1972.0037
Asperity persistence and the real area of contact between rough surfaces
J. Peter Williamson (1972)
Microtopography of the grinding wheel surface with SEM
Y. Matsuno (1975)
Heat transfer augmentation in turbulent boundary layer: Advances in Engineering Heat Transfer1995
Zukauskas (1995)
Kinetics of graphite dissolution in molten iron and surface structure of corroded graphite: Huagong Yejin/Engineering
Quo (1994)
10.1080/00221689309498862
The effects of bed roughness on the distribution of turbulent intensities in open-channel flow
Jinjun Wang (1993)
Ronberg, Absolute measurement of running-in
A. Bengtsson (1986)
The measurement of surface
R. E. Reason (1960)
Heat transfer and friction characteristics of turbulator radiator tubes: SAE (Society of Automotive Engineers
Farrell (1991)
Qualitative evaluation of roughnessln machined surfaces of the higher class of finish by x-ray reflectometry: Measurement
V. M. Sinaiski (1983)
Study of the fundamental mechanisms of erosion using Hertzian fracture tests: Wear v
Lu (1993)
A light projection technique for studying surface topology
M. C. Shaw (1963)
On-line measuring of the roughness of periodically shred surfaces using the reflection index: Tech
Piwonka (1979)
10.1016/0043-1648(93)90128-9
Effect of fillers on the friction and wear behaviour of ultrahigh molecular weight polyethylene during water-lubricated reciprocating sliding wear
Kashif Marcus (1993)
10.1109/20.490249
Effect of isotropic sub-micron crystallized texture of glass-ceramic disks on low glide, stiction, and CSS
Jialuo Jack Xuan (1995)
Laser modification of metal surfaces: Optics and Lasers in Engineering v
D. A. Scott (1993)
10.1016/0043-1648(91)90088-C
The influence of surface roughness texture on the temperature and scuffing in sliding contact
Robert Wolff (1991)
Contribution to the typology
O. Kienzle (1960)
The design, construction and commissioning of an inexpensive prototype laser optical profilometer
R. S. Sayles (1988)
An investigation on the roundness and side-wall errors in ultrasonic drilling
V. Soundararajan (1989)
Characteristic effects of DDC lubrication: Lubrication Science v
K. Tender (1993)
lida, Kisuke, Stock removal mechanism of grit blasting: Journal of the Japan Society of Precision Engineering/Seimitsu
Tosha (1992)
10.1109/21.259692
An efficient differential box-counting approach to compute fractal dimension of image
Nirupam Sarkar (1994)
10.1109/48.289447
Shallow water sonar conditions and radar backscatter
Siegfried Stolte (1994)
10.1016/0043-1648(77)90042-4
Real area of contact and friction stress — The role of trapped lubricant
T Nellemann (1977)
10.1117/12.939518
High Accuracy Form Measurement Of Specularly Reflecting Surfaces By Laser Autocollimation
Munmohan Singh Virdee (1987)
10.1016/0020-7357(67)90021-2
Surface effects in pneumatic gauging
John G. Wager (1967)
10.1016/0040-6090(92)90799-H
Surface evaluation of ultrathin platinum films
Sei-chi Itabashi (1992)
10.1016/0921-4526(95)00969-8
X-ray diffraction in quantum-well structures
Emil Zolotoyabko (1996)
10.1016/0042-207X(96)00069-3
Diffuse scattering of gas molecules from conical surface roughness
Ta-i Sawada (1996)
10.1115/1.2927196
Numerical Contact Model of a Smooth Ball on an Anisotropic Rough Surface
Chin Y. Poon (1994)
10.1080/07038992.1993.10874541
Evaluation of Limits to the Performance of the Surface Roughness Meter
F. B. Johnson (1993)
Assessment of surface typology analysis techniques
Jacques Peters (1979)
10.1080/00221689409498745
Hydraulics of Skimming Flows over Stepped Channels and Spillways
Hubert Chanson (1994)
10.1016/0039-6028(95)00157-3
Description of surface roughness as an approximate self-affine random structure
Oleg I. Yordanov (1995)
10.1557/PROC-361-257
Pt Hillock Formation and Decay
Scott R. Summerfelt (1994)
10.1049/cp:19950665
A Surface Relief Meter Based on Trinocular Vision
V.G.S. Ernst (1995)
Environmental Loading on Offshore Structures
K. Davis (1993)
10.1109/42.293919
Application of shape analysis to mammographic calcifications
Liang Shen (1994)
10.1016/0043-1648(93)90482-2
Mechanisms of hard alloy wear in frictional processes with polymers and composite materials
Alexander L. Zaitsev (1993)
10.1016/0043-1648(92)90260-F
Elastic-plastic contact model for bifractal surfaces
Bharat Bhushan (1992)
10.1016/0030-4018(95)00222-T
Anderson localization of surface electromagnetic waves on rough, perfectly conducting surfaces that are periodic on average
Jos'e A. S'anchez-Gil (1995)
10.1016/0141-6359(84)90007-2
Formation of surfaces with uniform micropatterns on precision machine and instruments parts
Yu.G. Schneider (1984)
10.1038/physci229086a0
Hardness of Rough Surfaces
Tom R Thomas (1971)
Ellipsometric measurements of surface roughness of silicon wafers: Electron Technology (Warsaw) v
Kaminska (1992)
Understanding gloss anisotropy in machine-made papers
Alexander A. Koukoulas (1994)
Electronic method, based on the surface of a liquid, for measuring flatness: Microtechnic
K. Miyazaki (1965)
Determination of a contact surface by the method of speckle photography: Soviet Physics
A. V. Osintsev (1988)
Growth of cobalt films on vicinal copper surfaces: Surface
Giesen (1995)
10.1117/12.215587
Influence of surface skewness on the zero-order light scatter for a given roughness
Jan H. Rakels (1995)
10.1016/0043-1648(82)90182-X
Deviations in form and workpiece accuracy
P. Herbert Osanna (1982)
10.1016/0043-1648(79)90098-X
Effect of material aspects on the production of machined and ground surfaces
D. M. Turley (1979)
Cutting out reflections: Glass v
Westra (1995)
10.1016/0921-4526(95)00900-0
Probing interface roughness by X-ray scattering
Dick de Boer (1996)
10.1080/10402009408983306
Behavior of Traction Oils under Impact Loads
Keiji Imado (1994)
10.1049/cp:19940011
An impedance UTD model for the prediction of terrain undulation and roughness effects in radiating systems
M. M. Poulouse (1994)
10.1177/002029407500800407
Some Ultimate Limits on the Measurement of Surfaces Using Stylus Techniques
David J. Whitehouse (1975)
10.1063/1.341530
Dipolar magnetic surface anisotropy in ferromagnetic thin films with interfacial roughness
Patrick Bruno (1988)
10.1016/0301-679X(95)00116-L
Sliding wear behaviour of ion implanted ultra high molecular weight polyethylene against a surface modified titanium alloy Ti-6Al-4V
C. Allen (1996)
10.1029/RG023i001p00001
Quantitative Methods for Analyzing the Roughness of the Seafloor (Paper 5R0105)
Christopher G. Fox (1985)
10.1007/BF00351613
A comparative evaluation method of machinability for mica-based glass-ceramics
D. S. Baik (1995)
10.1016/0960-1686(93)90228-Q
Plume rise measurements from large point sources in Israel
Geulah Sharf (1993)
10.1088/0031-8949/1992/T44/001
The Fractal Characterization of Rough Surfaces
Torstein Jøssang (1992)
Rough Surfaces: Singapore, World Scientific Press, ca
T. R. Thomas (1999)
McGurran, Some effect of surface texture on liquid behaviour
M. G. Nicholas (1986)
Measurement of surface roughness by pneumatic methods: Metrologia
C. Buzatu (1985)
IEEE, Piscataway, NJ
Electronic Components (1994)
Surface microtopography of aluminium plates for offset litho printing
A. Luders (1994)
Electrodischarge texturing (EOT) of steel rolls
D. K. Aspinwall (1989)
Identification and elimination of roughness patterns in coated products: TAPPI
Rogowski (1995)
Experimental studying contact metallic spots forming
L. V. Markova (1995)
Designating surface roughness
C. R. Lewis (1948)
10.1016/0094-114X(94)00040-R
Contribution to the controller design in tasks of robot deburring
Aleksandar D. Rodic (1995)
10.1016/0043-1648(80)90197-0
The accuracy of turned surfaces
S. Vajpayee (1980)
10.1115/1.2910887
Wall Roughness Effects on Stagnation-Point Heat Transfer Beneath an Impinging Liquid Jet
Laurette A Gabour (1994)
Surface topography measurement techniques
C. Mollenhauer (1973)
10.1364/AO.30.000042
Stylus profiling at high resolution and low force.
Junfeng Song (1991)
10.1063/1.882369
A Surface View of Etching
John J Boland (1998)
10.1016/0043-1648(93)90100-Z
Corrosion-wear study of 304 stainless steel in various NaCl solutions
Wu Chung-Wen (1993)
10.1016/0925-9635(94)90081-7
Mechanical properties of ion-beam deposited diamond-like carbon on polymers
Andrew Robert Mccabe (1994)
10.1016/0022-0248(93)90443-Z
Layer quality of Sb-doped GaAs grown by metalorganic vapor phase epitaxy
Rositsa Yakimova (1993)
10.1016/0039-6028(93)91474-4
Ultralarge atomically flat template-stripped Au surfaces for scanning probe microscopy
Martin Hegner (1993)
10.1109/HOLM.1993.489675
Resistance buildup in electrical connectors due to fretting corrosion of rough surfaces
Michael David Bryant (1993)
10.1243/JMES_JOUR_1978_020_044_02
The Influence of Surface Roughness on Friction and Wear in Boundary Lubrication
Terumasa Hisakado (1978)
10.1061/(ASCE)0733-9372(1993)119:3(591)
Design of sewers based on minimum velocity
Ismail I. Esen (1993)
10.1016/0043-1648(79)90103-0
Detection and measurement of damage to surfaces after static contact loading
A. Williams (1979)
10.1016/0039-6028(95)01302-4
Anharmonic effects at the onset of the Ag(110) roughening transition
G Bracco (1996)
10.1016/0043-1648(82)90184-3
Surface roughness effects in point contact elastohydrodynamic lubrication
Alan W. Bush (1982)
10.1080/10402009408983333
Frictional Behaviors of Some Nitrogen Ceramics in Conformal Contact with Tin Coated Al-Si Alloy, Steel and MMC
Qian Wang (1994)
10.1016/0043-1648(86)90264-4
Problems in measuring the topography of machined surfaces produced by plastic deformation mechanisms
B. J. Griffiths (1986)
10.1109/IGARSS.1995.524098
Decorrelation of backscattered signal due to soil moisture changes
Giuseppe Nesti (1995)
10.1111/j.1151-2916.1995.tb08650.x
Striation‐Free, Spin‐Coated Sol‐Gel Optical Films
Xin Du Min (1995)
Particle inspection on bare wafer by side-scattering light detection: Conference on Solid State Devices and Materials
M. Noguchi (1992)
10.1016/0039-6028(95)00293-6
Experimental investigation of criteria for thermal roughening
Petra Hegeman (1995)
Rarefied solids: Microgravity Science and Technology v
D. A. Noever (1995)
Evaluation of form errors of axi-symmetric components: 2nd Int.Conf.on Met.Prop.of Eng.Surf
Murthy (1982)
10.1002/aic.690420329
Role of surface fines on growth rate of L-SCMC crystals in DL-SCMC aqueous solution
Masaaki Yokota (1996)
Connection between sputter cleaning and adhesion of thin solid films: Surface & Coatings Technology, v
Koski (1996)
Electroerosion machining and control of the surface quality of technological equipment: Elektronnaya Obrabotka Materialov no. 2 Mar-Apr
N. K. Fottev (1994)
Length of surface profiles: Engineered Surfaces: American Society of Mechanical Engineers
Zipin (1992)
Tong-Kuan, Surface organisation of carbon black and its implication on rubber reinforcement: Progress in Rubber and Plastics Technology v
Donnet (1995)
10.1016/0304-8853(94)90651-3
Evaluation of the magnetic dipolar fields from layered systems on atomic scale
Evgenii Tsymbal (1994)
10.1016/0039-6028(95)00359-2
The epitaxial growth of Cu on Si(111)7×7: a RHEED study
T.I.M. Bootsma (1995)
10.1016/0301-679X(87)90091-0
Surface topography and lubrication in sheet-metal forming
Di Bello (1987)
10.1080/07038992.1996.10874632
Potential of Synthetic Aperture Radar for Large-Scale Soil Moisture Monitoring: A Review
Johanne B. Boisvert (1996)
10.1016/S0007-8506(07)62249-5
Optimization and Dynamic Adaptation of the Cutter Inclination during Five-Axis Milling of Sculptured Surfaces
Jean-Pierre Kruth (1994)
Calibration of a 3D surface roughness measuring device
F. Desages (1993)
Some aspects of unbalance in the wheel-spindle assembly of cylindrical grinding
G. Trmal (1975)
Theoretical analysis of stylus integration: Ann
D. J. Whitehouse (1974)
Plasma coatings of chills for magnesium castings
D. G. Isaev (1992)
Walmsley, Walsh functions and their use in the assessment of surface
E. H. Smith (1979)
Threedimensional roughness measurement with a stylus instrument
R. S. Sayles (1978)
Height Sensitive Surface Roughness Parameters: Appl.Surf.Sci
Zipin (1981)
Conductive properties of two-component xerographic developer materials
E. J. Gutman (1995)
Mikrogeometria i Ekspluatacionniye Svoistva Mashin (in Russian; Surface roughness and performance of Machines)
A. Yonans (1984)
An approach to the evaluation of surface profiles by separating them into functionally different parts
U. Schneider (1988)
Electrical discharge machining characteristics of Ti6AI-4V alloy: Keikinzoku/Journal of Japan
Yan (1992)
10.1016/0022-1694(93)90226-Y
The causes of stemflow variation in three semi-arid growing species of northeastern Mexico
J. Navar (1993)
10.1007/BF00189302
Velocity field measurements of cavitating flows
A. L. Tassin (1995)
Normal vibrations and friction under harmonic loads
Dale P. Hess (1991)
Flow of a thin film over a rough rotating disk
Fangrui Ma (1994)
10.1016/0304-8853(93)90007-O
Intrinsic biquadratic contribution to interlayer coupling in magnetic layered structures
J. Barnas (1993)
Comparison of bidirectional reflectance measurements and model for rough metallic surfaces
Robert G. Hering (1970)
10.1080/10402009608983553
Improvement in dynamic characteristics of circular journal bearings by means of longitudinal microgrooves
Takahisa Kato (1996)
10.1016/0304-8853(93)90012-Q
Surface and volume pinning of domain walls in amorphous ribbons
Joseph Horvat (1993)
10.1016/0304-8853(95)00788-1
Magnetoresistance in sputtered Fe/Cr multilayer films
Eun Mi Ho (1996)
10.1016/0004-6981(88)90438-6
A simple physical model of dry deposition to a rough surface
Michael Bennett (1988)
10.5006/1.3293603
Surface Roughness and the Metastable Pitting of Stainless Steel in Chloride Solutions
G. Tim Burstein (1995)
10.1016/0304-3991(95)00093-G
Under buffer SFM observation of immunospecies adsorbed on a cyano grafted silicon substrate.
P E Mazeran (1995)
Evaluating the Variability of Engineering Properties of Soil Deposits Using Fractals
Luis Vallejo (1996)
10.1016/0956-7151(94)90034-5
Fiber fracture during the consolidation of metal matrix composites
James F. Groves (1994)
Improved roll texturing through implementation of statistical process control
H. E. Billot (1994)
10.1088/0022-3727/25/8/019
Surface measurement and fractal characterization of naturally fractured rocks
Chin Y. Poon (1992)
10.1061/(ASCE)0733-9429(1994)120:1(60)
Flow Velocity Profiles in Gravel-Bed Rivers
Vito Ferro (1994)
10.1117/12.7972054
Measurement of the Finish of Diamond-Turned Metal Surfaces By Differential Light Scattering
Eugene L. Church (1977)
10.4271/790851
The Use of the Scanning Electron Microscope in Analyzing Rolling Contact Surfaces
W. J. Derner (1979)
10.1016/0030-4018(95)00562-1
Nonlocal effects on the optical response of a rough surface
Shu Wang (1995)
10.1016/0022-0248(94)90189-9
Epitaxial growth and structure characterization of single-crystal Co(11⦶20) films on Cr(100) surfaces
J. C. A. Huang (1994)
10.1139/tcsme-1978-0025
A Simplified Probabilistic Model for Two-Dimensional Profile Characterization of Surfaces Machined by Finishing Processes*
A. A. Elgabry (1978)
10.1080/10426919408934915
Excimer Laser Processing of Nodular Iron
André Cerejeira Fontes (1994)
10.1016/0043-1648(82)90204-6
Defining the microtopography of surfaces in thermal contact
Thomas Ronald Thomas (1982)
10.1115/1.2831290
Determination of Ball and Roller Compliances Using a Vibration Measuring Technique
Alaa G. Sherif (1995)
10.1080/10402009608983550
Infrared and visual study of the mechanisms of scuffing
J. C. Enthoven (1996)
10.4271/670031
Peak to Valley Surface Roughness Control Now
Robert R. Hydell (1967)
10.1117/12.139243
Rapid surface roughness measurements of coarse objects
John N. Pike (1992)
10.1063/1.113902
SURFACE ROUGHNESS EFFECTS IN LASER CRYSTALLIZED POLYCRYSTALLINE SILICON
D. J. McCulloch (1995)
10.1016/0043-1648(86)90282-6
Importance of checking the stylus radius in the measurement of surface roughness
I. M. Elewa (1986)
10.1016/0043-1648(75)90145-3
The elastic contact of a rough surface
Alan W. Bush (1975)
10.1016/0039-6028(94)00757-8
STM study of Mo growth and induced surface structure changes on HOPG
Hy Xu (1995)
10.1016/0890-6955(93)90067-5
Characterisation of ground surface profiles: a comparison of AR, MA and ARMA modelling methods
S.Ravi Teja (1993)
10.1098/rspa.1986.0055
The effect of a footprint on perceived surface roughness
David Newland (1986)
Investigating a trans-dichloroethylene vapor cleaning process.
Damon K. DeBusk (1995)
10.1016/0043-1648(76)90080-6
Peripheral electrochemical grinding of sintered carbides — Effect on surface finish
Michael Geva (1976)
10.1109/8.391134
Surface reflection at low-angle propagation
Didier Rana (1995)
10.1080/00986449208936082
INTERFACIAL FRICTION FACTORS IN COUNTERCURRENT STRATIFIED TWO-PHASE FLOW
S. C. Lee (1992)
10.1016/0925-7535(93)90056-J
Slipping accidents in Great Britain — an update
T. D. Proctor (1993)
10.1061/(ASCE)0733-9399(1994)120:4(720)
Modified Eddy Viscosity Model in Fully Developed Asymmetric Channel Flows
Whey-Fone Tsai (1994)
10.1016/0040-6090(92)90816-T
The effects of surface and interface scattering on the electrical resistivity of double-layered thin films
N. Artunç (1992)
Flow Capacity of Rehabilitated Sanitary Sewers
Kenneth K. Kienow (1994)
10.1063/1.1721448
Contact and Rubbing of Flat Surfaces
J. F. Archard (1953)
10.1016/0360-5442(95)00115-8
Optimization of in-tube enhancement for large evaporators and condensers
Tiruvadi S. Ravigururajan (1996)
10.1016/0890-6955(92)90068-R
Non-Gaussian effects in microcontact
John I. McCool (1992)
10.2514/3.48177
Predicting the effects of surface roughness on laminar-turbulent transition for axisymmetric bodies
Mario J. Casarella (1980)
10.1016/0043-1648(92)90125-R
Application of the modified Greenwood and Williamson contact model for the prediction of thermal contact resistance
Thomas H. Mcwaid (1992)
10.1016/0956-716X(95)00443-Y
Surface treatment of carbon fibers for aluminum alloy matrix composites
Ian Wavell Hall (1995)
10.1016/0890-6955(92)90063-M
Use of profile data in simulation of lubrication of real surfaces
C. C. Kweh (1992)
10.1117/12.22817
Angstrom level profilometry for submillimeter- to meter-scale surface errors
Paul E. Glenn (1990)
10.1016/0043-1648(80)90217-3
The topography of abraded surfaces in relation to contact area and mechanism of abrasion
J. D. Huffington (1980)
10.1016/0008-8846(94)90059-0
Assessment and evaluation of fractal dimension of concrete fracture surface digitized images
Mohsen Issa (1994)
10.1109/JOE.1987.1145266
Radiation reflected from random rough surfaces
William Coryell Meecham (1987)
10.1016/0043-1648(74)90107-0
Surface topographic changes at breakdown of thin-film lubrication; a short account of a collaborative C.I.R.P. investigation☆
Geoffrey W. Rowe (1974)
10.1007/BF00819135
Determination of surface roughness according to the All-Union State Standards (GOST) 2789-73
V. S. Luk’yanov (1974)
10.1016/0042-207X(81)90081-6
Quantitative compositional analyses of engineering surfaces, using AES
M. Keenlyside (1981)
10.1016/0043-1648(81)90294-5
Electron microscopy study of surface and subsurface friction damage in single-crystal SiC
Olusegun Oyeleke Adewoye (1981)
10.1063/1.360034
Angular‐selective optical transmittance of highly transparent Al‐oxide‐based films made by oblique‐angle sputtering
David Le Bellac (1995)
10.1016/0040-6090(93)90564-6
High resolution Rutherford backscattering spectroscopy studies on Mo/Si multilayers
Bernhard Heidemann (1993)
10.1080/00986449608936418
TURBULENT FLOW IN A PIPE WITH INTERMITTENT ROUGH PATCHES: AN ANALOGUE OF ANNULAR TWO-PHASE FLOW
Sreenivas Jayanti (1996)
10.1063/1.339953
Multiple scattering from a randomly rough surface
Ya‐Qiu Jin (1988)
10.1016/0043-1354(94)90100-7
Air-Water Interface Area in Self-Aerated Flows
Hubert Chanson (1994)
10.1016/0920-3796(95)90132-9
Interface conductance between roughened Be and steel under thermal deformation
Mark S. Tillack (1995)
10.1016/0169-4332(93)90504-5
Bulk and surface properties of RTCVD Si3N4 films for optical device applications
Frédéric Lebland (1993)
10.1016/0010-4485(76)90090-7
Comparison of different methods for computing the two-dimensional envelope for surface finish measurements
M. S. Shunmugam (1976)
Heat treat cracking of superalloys
Dwain L. Klarstrom (1996)
10.1117/12.145530
Laser gage using chirped synthetic wavelength interferometry
Peter J. de Groot (1993)
10.2493/jjspe.62.230
6-Axis Control Finishing for Character Line.
Tatsuya Hisaki (1996)
10.1007/BF00278160
Oxidation of polypropylene using phase-transferred permanganate as oxidant
Jayashree Konar (1994)
10.1115/1.3261574
Adhesion Model for Metallic Rough Surfaces
Wen Rui Chang (1988)
10.1016/0022-3115(79)90403-3
Changes in the roughness factors of 304 stainless steel, pyrolytic carbon and silicon carbide surfaces with energetic ion irradiation
Kuniaki Watanabe (1979)
10.1016/0167-6105(92)90425-A
Wind structure over postglacial lava surface
Jónas Thór Snæbjörnsson (1992)
10.1016/0924-0136(93)90087-M
The properties of a repeatedly ballised hole surface
Man On Lai (1993)
10.2514/3.24106
MODIFIED SPALART-ALLMARAS ONE-EQUATION TURBULENCE MODEL FOR ROUGH WALL BOUNDARY LAYERS
Jaesoo Lee (1996)
10.1080/00207219208925778
Classification of polymeric material surfaces
Danka Slavínská (1992)
10.1080/01431169308904396
Scattering laws for reflected solar radiation and the characterisation of terrain roughness
Nicholas D. Efford (1993)
Fatigue behaviour of rope eutectoid steel wires
Stefano Beretta (1994)
10.1002/(SICI)1099-0526(199707/08)2:6%3C30::AID-CPLX6%3E3.0.CO;2-L
How nature works: The science of self-organized criticality
David M. Raup (1997)
Surface testing using the Hommel
H. Wolff (1967)
Frictional and elastic propertie of high polymeric materials: Brit.J.Appl.Phys
B. Lincoln (1952)
10.1149/1.1836996
Topographic Changes of Polycrystalline Ag and Cu Electrodes in Acid Aqueous Solutions Resulting from a Prolonged Application of the Potential Reversal Technique
Pilar Carro (1996)
10.1364/AO.17.003827
Laser heterodyne apparatus for roughness measurements of polished surfaces.
Sverker Hård (1978)
10.1117/12.945030
Statistical Effects In The Measurement And Characterization Of Smooth Scattering Surfaces
Eugene L. Church (1985)
10.1557/JMR.1994.1156
Chemisorptive electron emission as a probe of plastic deformation in reactive metals
J. Thomas Dickinson (1994)
10.1080/09500838708228739
Fractal characterization of rough surfaces using secondary electrons
Chandra S. Pande (1987)
10.1063/1.339427
Scaling law for contoured length of engineering surfaces
Frederick F. Ling (1987)
10.1080/10402009508983463
Surface Integrity and Wear Behavior of Ground Ceramics
Paul Roth (1995)
10.2464/jilm.42.459
Diffusion welding of zirconia and Al-Sn alloy in the atmosphere.
Isao Itoh (1993)
Plastic replicas for surface-finish measurement
J. Pearson (1948)
IEEE, Piscataway, NJ, p
Optical-Microwave Earth (1995)
Internal-variables' approach in friction modeling of computer simulation in sheet-metal forming processes: Journal of Materials Processing Technology, v
Hsu (1993)
Approximate methods of assessment of surface topography parameters
D. J. Whitehouse (1976)
Influence of stress intensity
D. Hull (1996)
Multiscale of engineering surface: Int
X. Chen (1995)
Mirgaux, Mathematical study to obtain qualitative effects of roughness in technical problems: Wear, V.109
Lanchon (1986)
A mode of substrate surface roughness effect on the electrical properties of thin film
L Toth (1987)
A topographic study
conditions. Ohlsson (1996)
New methods for estimation of the article surface roughness and for correction of the ultrasonic defectoscope susceptibility
V. G. Shcherbinskij (1992)
10.1177/001872088002200104
A Vector Model Analysis of Individual Differences in Sensory Measurement of Surface Roughness
Yukio Inukai (1980)
10.1016/0043-1648(80)90069-1
The effect of surface texture on friction mechanisms
Monir M. Koura (1980)
Easier check on surface finish
C. Baker (1957)
Design and performance assessment of a Kelvin clamp for use in relocation analysis of surface topography: Precision Engineering v
I. Sherrington (1993)
EFFECTS OF SURFACE CONDITION AND METALLURGICAL PRACTICE ON THE CORROSION BEHAVIOUR OF AA 7075 ALUMINIUM ALLOY
Tair I Wu (1996)
Metal/AI//2O//3 multilayers as high-temperature x-ray mirrors: Structure and Properties of Multilayered Thin Films
Morawe (1995)
Influence of surface topography on the friction and lubrication of elastometers
D. F. Moore (1971)
Summit height probability density and anisotropic rough surface summit characteristics
N. F. Semenyuk (1986)
Relaxation of the internal boundary layer behind a low obstacle in the channel
V. V. Olimpiev (1995)
10.1016/0960-1481(96)88415-1
A design strategy for the improvement of an existing 300kW WTGS rotor blade
Kazuichi Seki (1996)
On deformation of surface
T. Nakamura (1966)
Mathematical model of rain soil erosion and its computer realization: Avtomatika no. 2 Mar-Apr
Ladikov-Roev (1993)
Those conflicting surface specs
E. F. Miller (1965)
Role of fracture mechanics parameters in glass/ceramic wear: Engineering Fracture Mechanics v
Mashal (1995)
10.2514/6.1990-2850
Aerodynamic effects of body roughness
Asher Sigal (1990)
Effect of the types of mill on the flowability of ground powders: Advanced Powder Technology v
Oshima (1995)
10.1016/0043-1648(72)90417-6
Deformation of single and multiple asperities on metal surfaces
Ashok Uppal (1972)
10.1016/0043-1648(74)90165-3
A theoretically determined model for friction in metal working processes
Tarras Wanheim (1974)
10.1016/0890-6955(92)90081-Q
Performance assessment of stylus based areal roughness measurement systems
Ian Sherrington (1992)
10.1364/AO.23.003820
Surface roughness measurements of low-scatter mirrors and roughness standards.
Karl H. Guenther (1984)
10.1117/12.939841
Scanning Tunneling Microscopy (STM) Of A Diamond-Turned Surface And A Grating Replica
Robert A. Dragoset (1987)
10.1016/0043-1648(79)90100-5
The contact behaviour of surfaces of small nominal area
Kenji Nuri (1979)
10.1016/0141-6359(80)90136-1
Surface finish measurement using microwaves
M. S. Shunmugam (1980)
10.1016/0022-0248(95)01048-3
Some causes and a consequence of epitaxial roughening
Andrew Zangwill (1996)
10.1139/l96-061
A conservative diffusion wave flood routing scheme for channel networks
M. A. Sabur (1996)
10.1002/bit.260440315
Morphological kinetics and distribution in somatic embryo cultures.
Chung Ming Chi (1994)
10.1177/014233128000200305
A practical means of quantitatively describing the topographies of machined surfaces
Major C. J. Edmonds (1980)
10.1016/0038-1098(93)90529-V
Microstructure in thin carbon films
J. González-Hernández (1993)
10.1016/0043-1648(93)90418-L
Predicting the friction and durability of MoS2 coatings using a numerical contact model
Jill Audrey Ogilvy (1993)
10.1061/(ASCE)0733-9437(1992)118:6(981)
Furrow Flow Velocity Effect on Hydraulic Roughness
Thomas J. Trout (1992)
10.1016/0378-5963(81)90026-X
Surface flattening kinetics by optical scattering technique
S. E. Hebboul (1981)
10.4271/900910
Applying the Modified Lambda Ratio to Bearings and Gears
Charles A. Moyer (1990)
10.1063/1.103390
Scanning tunneling microscopy on rough surfaces: Deconvolution of constant current images
Guenter Reiss (1990)
10.1243/PIME_PROC_1970_185_081_02
A New Unified Approach to Surface Metrology
Robert C. Spragg (1970)
10.2166/wst.1995.0271
A method for describing biofilm surface roughness using geostatistical techniques
Jewelle Taylor Gibbs (1995)
10.1016/0021-8502(92)90420-Z
Comparison of light scattered by a single particle on different surfaces
Guangjian Yu (1992)
10.1115/1.3453271
Strongly Anisotropic Rough Surfaces
Alan W. Bush (1979)
10.1080/10402009408983328
Factors Influencing the Abrasion Resistance of Thin-Film Magnetic Media
K. J. Schulz (1994)
10.1016/0009-2509(92)85123-S
Dynamic wetting in the low capillary number regime
Jill E. Seebergh (1992)
10.1088/0370-1328/79/3/310
A Coefficient of Friction which increases with Increasing Load. Results with Undrawn Nylon Monofilaments, and a Theoretical Explanation
John Mølgaard (1962)
10.1016/0168-583X(87)90504-0
Surface roughness correction in thick target pixe analysis
Ž. Šmit (1987)
10.1016/0030-3992(95)00034-8
Roughness determination by direct visual observation of the speckle pattern
M. A. Rebollo (1995)
10.1364/AO.16.002152
Scanning moiré method and automatic measurement of 3-D shapes.
Masato Idesawa (1977)
10.1243/PIME_CONF_1967_182_323_02
Paper 16: High-Precision Optical Profilometer for the Study of Micro-Geometrical Surface Defects
Mlle O. Dupuy (1967)
Measurement and characterization of tunnel roughness with respect to ventilation and heat flow theory: Proceedings of the US Mine Ventilation
A. J. Jeffery (1993)
Mechanical adhesion in coated paper Effect of roughness and coat weight: International Paper and Coating Chemistry
Dickson (1996)
Flow characteristics in rectangular ducts
E. I. Gnggs (1992)
Thermal analysis of axially grooved heat pipes
Yasuhiro Kamotani (1976)
10.1016/0043-1648(80)90262-8
Development of a wear equation for polymer-metal sliding in terms of the fatigue and topography of the sliding surfaces
Vijay Kumar Jain (1980)
Surface roughening in liquid lubricated upsetting: Metalwork Lubr, Presented at the Int Symp, Century 2
W.R.D. Wilson (1980)
10.1016/0043-1648(81)90035-1
The application of Auger electron spectroscopy to the study of wear surfaces
Hans Jörg Mathieu (1981)
Regularities of interaction of underground construction with the ground: Prikladnaya
K. S. Sultanov (1993)
Zaritskii, Formation of surface roughness during surface finishing
V. A. Losev (1983)
Surface profile analysis by changing the stylus radius
V. Radhakrishnan (1980)
Effect of manufacturing conditions on surface defect production of powder forged material: Journal of the Japan Society of Powder and Powder
Takahashi (1994)
Hierarchical model of rough rock joints based on micromechanics: International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, v
Dong (1996)
Measurement of bearing curves
Y. Oonishi (1966)
Sung-Yuh, In situ x-ray reflectivity measurement of thin film growth during vacuum deposition: Applied Surface Science, v
Lee (1996)
Observations of roughening on ln//0//.//lGa//0//.//9As/GaAs surfaces by atomic force microscopy: Semiconductor Science and Technology v
Fatt (1993)
10.2464/jilm.44.41
Effect of interstage annealing on increase in limit strain of aluminum sheets.
Norio Takakura (1994)
Two dimensional measurement of surface roughness by the light sectioning method
Uchida (1979)
Influence of vortex generators on NREL S807 airfoil aerodynamic characteristics and wind turbine performance: Wind Engineering v
Wetzel (1995)
10.1115/1.2901802
On the Possibility of Process Monitoring in Grinding by Spark Intensity Measurements
Bp Rajmohan (1994)
10.1002/sia.740020307
The development of surface shape during sputter‐depth profiling in Auger electron spectroscopy
Surinder S. Makh (1980)
Spedding, The time series modelling on non-gaussian engineering processes: 2nd Int.Conf.on Met
W. Watson (1982)
IEEE, Piscataway, NJ, p
Semiconductor Devices (1995)
Fundamental Electronic Science (English translation of Denshi Tsushin
III Part (1994)
The slope of the bearing area
M. 1958. Ehrenreich (1958)
Engineering surfaces as fractals, in Fractal Aspects of Materials: Pittsburgh, PA, Materials
A. P. Thomas (1986)
How to measure surface finish: Can
L. Walter (1953)
Motifs' method. Interesting complement to ISO parameters for some functional problems: International Journal of Machine Tools & Manufacture v
Boulanger (1992)
Diffusion-dislocation deformation of surface roughnesses upon contact of solid bodies
V. S. Gostomel'skii (1989)
Criterion of articles quality, produced on the base of multisteps sheet metal stamping: KuznechnoShtampovochnoe
V. V. Karzhavin (1994)
Longitudinal streaks
Colombini (1995)
Tribological behaviour of solid lubricating coatings
M. Babich (1995)
The Proficorder An instrument for recording waviness and other surface profiles
E. J. Abbott (1948)
10.1109/ULTSYM.1991.234250
Effect of the hydrodynamic bearing on rotor/stator contact in a ring-type ultrasonic motor
Tomoyuki Maeno (1991)
10.1145/133994.134075
Predicting reflectance functions from complex surfaces
Stephen H. Westin (1992)
10.1002/chin.199513302
Silicon Carbide Wafer Bonding.
Q.‐Y. Tong (1995)
10.1016/0022-0248(95)01056-4
Chemical and physical effects in oxygen incorporation during the metalorganic vapor phase epitaxial growth of GaAs
Thomas F. Kuech (1996)
3-D surface topography measurement system and its applications: SAE Special Publications no. 936
Jeng (1992)
Roughening by ion
R. Cuerno (1995)
AN INVESTIGATION OF CAR USERS' PERCEPTIONS OF THE RIDE QUALITY OF ROADS
D. Potter (1992)
Experimental investigation of heat transfer enhancement in circulating fluidized beds: ASME/JSME Thermal Engineering Joint Conference
Hyre (1995)
Contacting of rough surfaces through a polymer layer
A. P. Makushkin (1986)
Macro and microtribological studies of CrC>2 video
Bhushan (1995)
Tapering for surface inspection
W Darmody (1946)
10.1016/0043-1648(93)90089-5
Frictional behavior of extremely smooth and hard solids
Dookyung Kim (1993)
10.1016/0020-7357(77)90018-X
Analysis and synthesis of surface profiles using Fourier series
Jay Raja (1977)
10.2166/wst.1994.0154
Surface Flow and Particle Settling in a Coastal Reed Field
Yasuyoshi Hosokawa (1994)
10.1016/B978-0-08-003491-1.50007-1
INFLUENCE OF THE RIGIDITY OF THE MACHINE-WORKPIECE-TOOL SYSTEM ON THE ROUGHNESS OF MACHINED SURFACE
A. I. Isaev (1968)
10.9753/icce.v24.%p
MODELLING MOVEABLE BED ROUGHNESS AND FRICTION FOR SPECTRAL WAVES
Leszek Kaczmarek (1995)
10.1016/0167-577X(94)90011-6
Electrodeposited zinc coatings on aluminium
Christos Panagopoulos (1994)
10.1049/tpe:19780027
Surface texture measurement
Ann Harvie (1978)
10.1016/0039-6028(96)00190-2
Roughening of the surface of an Si layer grown on an Si(111)-(7 × 7) superlattice
Yukichi Shigeta (1996)
10.1103/PhysRevA.39.1500
Evaluating the fractal dimension of profiles.
Dubuc (1989)
10.1016/0043-1648(95)06761-2
Metallic sliding friction under boundary lubricated conditions: Investigation of the influence of lubricant at the start of sliding
Eleonora M. Kopalinsky (1995)
10.1038/308721a0
Fractal character of fracture surfaces of metals
Benoit B. Mandelbrot (1984)
10.1016/0257-8972(95)02652-5
Surface effects on the growth, adhesion and properties of reactively deposited hard coatings
Douglas M. Mattox (1996)
10.4271/911199
Landing Gear Design Requirements for Bomb-Damaged Runway Operations
Henry Pollack (1991)
10.1115/1.2831270
A Numerical Elastoplastic Model for Rough Contact
Camille Mayeur (1995)
10.1029/JC085iC07p03955
Geometric properties of the underside of sea ice
D. Andrew Rothrock (1980)
10.1016/S0007-8506(07)61281-5
Surface Studies during Indexable Drilling with Coated Carbides of Different Geometry
Vasisht Venkatesh (1992)
10.1243/JMES_JOUR_1978_020_054_02
Calculation of the Topographic Characteristics of Rough Surfaces by Virtue of Profile
N. B. Demkin (1978)
10.1088/0022-3727/28/3/019
Assessment of optical constants of multilayer thin films with columnar-structure-induced anisotropy
Haiming Wang (1995)
10.1016/0890-6955(93)90044-U
Representation of three-dimensional surface topography in CAD-systems and image-processing software
B.-G. Rosén (1993)
10.1109/ECTC.1993.346700
Electroless Cu plated AlN substrate
Bi-Shiou Chiou (1993)
10.1049/cp:19950427
A ray-based, millimetre wave urban propagation tool
P.G.V. Charriere (1995)
10.1016/0043-1648(92)90062-D
Description of the bearing length curve of the inner surface of piston engine cylinders
Jacek Michalski (1992)
10.6028/jres.076c.003
Precision reference specimens of surface roughness: Some characteristics of the cali-block
Russell D. Young (1972)
10.1016/0043-1648(94)06559-4
New approach to the problem of bearing for rough surfaces under quasistatic load
A. Polijaniuk (1995)
10.4028/www.scientific.net/MSF.182-184.155
On the Mechanism of RHEED Oscillations in Molecular Beam Epitaxy of II-VI Compounds
Joachim Griesche (1995)
10.1016/0021-8928(92)90054-C
Fractal roughness in contact problems
Feodor M Borodich (1992)
10.1007/BF00456558
Atomic force microscopy: a key to direct wafer bonding technology
Victor H. C. Watt (1995)
10.1016/0375-9601(87)90546-9
Fractal dimensions and (a) spectrum of the Hnon attractor
Alain Arneodo (1987)
10.1016/0021-8634(70)90116-2
Introduction to terrain-vehicle systems
M. G. Bekker (1969)
10.1038/282885a0
Electron image processing
P. W. Hawkes (1979)
10.1111/j.1151-2916.1993.tb03783.x
Laser Specular Reflectance and the Optical rms Roughness of Alumina
Robert P. Kusy (1993)
10.1557/JMR.1990.2244
Quantitative topographic analysis of fractal surfaces by scanning tunneling microscopy
Morgan W. Mitchell (1990)
10.1051/rphysap:01988002302011100
Evaluation de la dimension fractale d'un graphe
Christian Tricot (1988)
10.1002/hyp.3360080304
Capturing the essential spatial variability in distributed hydrological modelling: Hydraulic roughness
Baxter E. Vieux (1994)
10.1080/09500349114552411
Theory of Wave Scattering from Random Rough Surfaces
J. Christopher Dainty (1991)
10.1115/1.2817329
On the roughness Reynolds number transition criterion
Jamal A. Masad (1995)
10.1115/96-GT-422
Simulation of Performance Deterioration in Eroded Compressors
Deepinder Singh (1996)
10.1109/94.368685
Electroluminescence from polyolefins subjected to a homogeneous ac field
Jacob C. Jonsson (1995)
10.1002/ls.3010080306
On thin film lubrication
Wen (1996)
10.1364/AO.18.000236
Assessment of surface roughness by x-ray scattering and differential interference contrast microscopy.
P. A. J. de Korte (1979)
10.1115/1.2830584
Optical Surface Analysis of the Head-Disk-Interface of Thin Film Disks
Sleven W. Meeks (1995)
10.1116/1.577708
Scanning probe metrology
Joseph Edward Griffith (1992)
10.1115/1.2822517
Prandtl Number Influence on Heat Transfer Enhancement in Turbulent Flow of Water at Low Temperatures
Tiruvadi S. Ravigururajan (1995)
10.1016/0030-4018(91)90355-H
A comment on Wave scattering from non-random fractal surfaces
Akhlesh Lakhtakia (1991)
10.1002/jbm.820270608
Collagen types I and III at the implant/tissue interface.
Andreas F von Recum (1993)
10.1016/0041-2678(73)90003-1
Elastohydrodynamic lubrication of real surfaces
J. F. Archard (1973)
10.1016/0043-1648(76)90007-7
Evaluation of coated abrasive wear via statistical parameters
Farhat Ali Burney (1976)
10.1115/1.3451616
Analytical Studies of Contact of Nominally Flat Surfaces; Effect of Previous Loading
B. Mikic (1971)
10.1016/0304-3991(90)90010-J
Practical applications of scanning tunneling microscopy
David Robert Denley (1990)
10.1016/0043-1648(78)90262-4
Roughness and wear characteristics of spark-eroded surfaces
M. L. Jeswani (1978)
The role of the electric field in triboelectric charging of two-component xerographic developers
Edward J. Gutman (1995)
10.1016/0043-1648(94)90266-6
Correlating tool wear, tool life, surface roughness and tool vibration in finish turning with coated carbide tools
M Bonifacio (1994)
10.1557/PROC-317-303
Dislocation Nucleation from a Surface CUSP
Jiangwei Li (1993)
10.1063/1.344240
Pin-on-disk tribology of thin-film magnetic recording disks
Thomas E. Karis (1989)
10.1115/1.2920579
A Sliding Wear Model for Partial-EHL Contacts
Shifeng Wu (1991)
10.1016/0039-6028(95)00260-X
Step topography of Si(001) vicinals, clean and after deposition of As, Sb and Bi
J. Wasserfall (1995)
10.1080/10402009608983571
Micro-EHL Analysis of Ground and Superfinished Steel Discs Used to Simulate Gear Tooth Contacts
M. J. Patching (1996)
10.1016/0045-7949(92)90385-D
Impact in highway prestressed concrete bridges
Tao Wang (1992)
10.2514/3.12660
Sensitivity of amplification-factor transition criterion for flow over roughness element
Jamal A. Masad (1995)
10.1016/0039-6028(95)01369-5
Fractal analysis of scanning probe microscopy images
Nils Almqvist (1996)
Role of nickel in Si(001) roughening: Surface Science, v
V. A. Ukraintsev (1996)
10.1016/0039-6028(95)01042-4
The effect of surface reconstruction on the growth mode in homoepitaxy
Thomas Michely (1996)
Roughness measurement by
J. C. Stover (1974)
10.1016/0022-0248(95)80297-P
Migration-enhanced pulsed chemical beam epitaxy of GaP on Si(001)
Nikolaus Dietz (1995)
Application of reflection
J. S. Halliday (1957)
10.1109/20.195575
The effect of slider roughness on asperity testing of thin-film media
Bryan K. Clark (1993)
Quantitative microcartography a physico-geometric approach to surface integrity
H. T. McAdams (1973)
W.E.R., Surface finish: Instn
1944. Clay (1944)
A stylus method
N. Schwartz (1966)
Supporting contact of two undulating rough surfaces
V. S. Radchik (1985)
10.1016/0043-1648(80)90090-3
Numerical investigation of the lubrication of doubly periodic unit roughnesses
Kristian To̸nder (1980)
Gorokhovsky, Effect of Tangential load on the Stressed State of Rubbing
Kuznetsov (1981)
Hardening of surfaces with electronic beams. Part II, Experimental results and applications: Haerterei
S. Panzer (1988)
Transmission electron microscopy of intermediate modulus carbon fibres: Electron Microscopy and Analysis 1991
L. Hayes (1991)
Use of two- and three-dimensional noncontact surface profiler for tribology applications: Surface Topography
S. R. Lange (1988)
Effect of punch surface topography on the deep drawing process
D. Spurgeon (1989)
Average values of total and mean summit curvatures and heights of asperities of an anisotropic rough surface
N. F. Semenyuk (1986)
Minimizing piping friction losses in low-pressure regulating valves: Control Engineering v
Ostand (1995)
10.1016/0043-1648(71)90050-0
An engineering model of spalling fatigue failure in rolling contact: II. The surface model
Tibor Tallián (1971)
Tribological aspects of hard turning with ceramic tools
Hans Kurt Tönshoff (1995)
10.1016/S0007-8506(07)60513-7
Progress in 3D Surface Microtopography Characterization
P. M. Lonardo (1996)
10.1049/ip-opt:19952269
Effect of roughness and inhomogeneity on evanescent single-mode optical couplers
Francois Ladouceur (1995)
10.1016/S0007-8506(07)62467-6
Computer Simulation for Cylindrical Plunge Grinding
Nan-Chieh Chiu (1993)
10.1016/0040-6090(95)08041-4
Photo- and potential-controlled nanoporous silicon formation on n-Si(111): an in-situ FTIR investigation
Joerg Rappich (1996)
10.9753/icce.v23.%p
THE PERMEABILITY OF RUBBLE MOUND BREAKWATERS. NEW MEASUREMENTS AND NEW IDEAS
A. F. Williams (1993)
10.1080/00405009508659038
Resolution of the Stick-slip Friction Traces of Fabrics
Joseph O. Ajayi (1995)
10.1557/JMR.1990.2616
Fractal analysis of erosion surfaces
Sreeram R. Srinivasan (1990)
10.1016/0301-679X(96)83204-X
Some considerations of slideway friction characteristics by observing stick-slip vibration
Etsuo Marui (1996)
10.1063/1.115788
ZnCdSe/ZnCdMgSe quantum wells on InP substrates for visible emitters
Abdullah Cavus (1996)
10.1109/PROC.1969.6887
Surface roughness studies by optical processing methods
Walter L. Anderson (1969)
10.1016/0167-9317(94)90153-8
Improvement of dry development of photoresist in a RIPE source for 0.4 to 0.35 μm technologies
Didier Louis (1994)
10.1016/0921-4534(94)90345-X
Roughness-induced absorption in layered superconductors
Tamara A. Leskova (1994)
10.1115/1.3261863
Large bearing numbers and stationary Reynolds roughness
Claude Greengard (1989)
10.1016/0304-8853(95)00808-X
Interface roughness correlation in tungsten/silicon multilayers
Matej Jergel (1996)
10.1111/j.1151-2916.1992.tb05489.x
Fractal Characteristics of Fracture Surfaces
George R. Baran (1992)
10.1016/0043-1648(75)90273-2
A simplified account of surface topography and the contact between solids
David Tabor (1975)
On the roughening of ceramic surfaces.
R HeffelfingerJ (1996)
Friction in seals acting on rough piston rod surfaces
Jonas Olsson (1990)
10.1115/1.2817294
Surface Roughness Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks
Andreas Poullikkas (1995)
10.1007/BF02574547
Liquid oscillations in a circular cylindrical container with “sliding” contact line
Helmut Franz Bauer (1992)
10.1364/AO.26.000704
Reflectivity of a slightly rough surface.
Ruth Schiffer (1987)
Flow Resistance and Energy Dissipation in Skimming Flow Over Stepped Spillways
Jorge Matos (1995)
10.1016/0167-9317(94)90145-7
A new operating regime for electroplating the gold absorber on x-ray masks
William J. Dauksher (1994)
10.1117/12.138867
Effects of ocean waves on remote imaging sensors
John W. McLean (1992)
10.1016/0039-6028(96)01359-3
STM studies of a catalytically active p(3 × 1) PtRh(100) alloy surface
Yuji Matsumoto (1996)
10.1016/0278-6125(94)90012-4
Statistical surface roughness checking procedure based on a cutting tool wear model
Kai Yang (1994)
10.1016/0890-6955(92)90059-P
Workpiece accuracy — the critical path to economical production
P. Herbert Osanna (1992)
10.1016/S0007-8506(07)62473-1
The Effect of Deformation on the Contact Area in Grinding
W. B. Rowe (1993)
10.1016/0043-1648(77)90076-X
Application of spherical indentation mechanics to reversible and irreversible contact between rough surfaces
H. A. Francis (1977)
10.1016/0017-9310(94)90211-9
Condensation of pure vapours and binary vapour mixtures in forced flow
J. Kellenbenz (1994)
10.1088/0305-4470/18/13/023
Sampling in a two-dimensional plane
David J. Whitehouse (1985)
10.1007/BF02487654
Evolution of roughness on the surface of a strained elastic material due to stress-driven surface diffusion
L.B.Freund (1994)
10.1109/20.490193
Tribological properties of barium ferrite films
Matthias Scherge (1995)
10.1002/hyp.3360080305
Measuring channel and gully cross‐sections with an airborne laser altimeter
Jerry C. Ritchie (1994)
10.1016/0169-7722(94)90073-6
Echo tracer dispersion in model fractures with a rectangular geometry
Irene Paula Ippolito (1994)
10.1016/0039-6028(96)00585-7
IR spectroscopy of adsorbed dinitrogen : a sensitive probe of defect sites on Pt(111)
Christopher R. Arumainayagam (1996)
10.2166/wst.1992.0629
Modelling of Solute Transfer to Surface Runoff
Jia Lin Lai (1992)
10.1002/jbm.820270403
Guided bone tissue elaboration by osteogenic cells in vitro.
Kiyonori Gomi (1993)
10.1016/0043-1648(72)90412-7
Lubrication of cylindrical rollers with surface corrugations
Kristian Tønder (1972)
10.1557/JMR.1996.0128
EFFECT OF SUBSTRATE ORIENTATION ON THE CRYSTAL QUALITY AND SURFACE ROUGHNESS OF NB-DOPED TIO2 EPITAXIAL FILMS ON TIO2
Ye Gao (1996)
10.1016/0043-1648(96)07207-9
Wear of cylinder bore microtopography
Bengt-Göran Rosén (1996)
10.1016/0964-1807(93)90296-E
Low-temperature crystallization of high Tc Y-Ba-Cu-O thin films by resistive evaporation
Jacob Azoulay (1993)
10.1038/scientificamerican0791-66
OPTICAL INTERFEROMETRY OF SURFACES
Glen M. Robinson (1991)
10.1016/0043-1648(79)90152-2
The machined surface — time series modelling
William Watson (1979)
10.1007/BF01121732
Computer research on surface roughness
Iu. V. Egorov (1975)
10.1016/0013-7944(94)90233-X
Plasticity induced fatigue crack closure in single and dual phase materials
Suleyman Bulent Biner (1994)
10.1016/0043-1648(76)90052-1
A stochastic approach to the mode of deformation and contact between rough surfaces
P. T. Suratkar (1976)
10.1115/1.3261540
On the Squeeze Effect of Lubricant Between Two Rough Surfaces
Etsuo Marui (1987)
10.1016/0093-6413(74)90046-9
The thermoelastic contact of rough flats and spheres
Hans Peter Rossmanith (1974)
10.1016/S0007-8506(07)62329-4
Investigation of surface integrity by molecular dynamics simulation
R. Rentsch (1995)
10.1016/0890-6955(92)90069-S
Measurement of fractal dimension from surface asperity profile
K. Sasajima (1992)
10.1115/1.2920243
Role of Fractal Geometry in Roughness Characterization and Contact Mechanics of Surfaces
Arun Majumdar (1990)
10.1016/0304-8853(95)00782-2
Microstructural characterisation of Co/Cu multilayers using X-ray diffraction
Kenneth Y.Y. Kok (1996)
10.1016/0039-6028(95)01351-2
An ion scattering study of the interaction of oxygen with Si(111): surface roughening and oxide growth
H. C. Lu (1996)
10.1080/00986449608936421
INTERFACIAL INTERACTIONS AND SECONDARY FLOWS IN STRATIFIED TWO-PHASE FLOW
Alain Liné (1996)
10.1115/1.2927241
Atomic-Scale Friction Measurements Using Friction Force Microscopy: Part II—Application to Magnetic Media
Bharat Vinod Bhushan (1994)
10.13031/2013.30167
Effect of Tillage on Surface Roughness
M. J. M. Romkens (1986)
10.1016/0043-1648(82)90339-8
Stylus measurement techniques: A contribution to the problem of parameter variation☆
Edward J. Davis (1982)
10.1016/0165-232X(92)90003-D
Two-dimensional extrusion of crushed ice. Part 1: experimental
M. Sayed (1992)
10.1016/0025-5416(75)90198-6
Geometrical characterization of surface roughness and its application to fatigue crack initiation
P. S. Maiya (1975)
Multiple-beam interferometry of surfaces and films
Samuel Tolansky (1968)
10.1115/1.2803304
Surface Smoothing Mechanism by Replication in Ironing Process
Zhrgang Wang (1995)
10.1016/0890-6955(92)90075-R
Analysis of lay characteristics of three-dimensional surface maps
Brian D. Boudreau (1992)
10.1016/0043-1648(63)90125-X
The role of surface asperities in transmitting tangential forces between metals
James J. O'Connor (1963)
10.1007/BF00619822
Determination of the standard deviation of height on a rough surface using interference microscopy
Peter Chandley (1979)
Preliminary calculation of roughness parameters for grinding of high-hot-strain and tool materials with SHM wheels: Soviet
O. B. 1983. Fedoseev (1983)
Recent advances in areal characterization: International Surface Colloquium
P. J. Scott (1994)
A.W.J., Selection of materials for lubricated journal bearings - determination of the critical roughness parameter: Wear
De Gee (1977)
10.1006/jsvi.1996.0272
RAPPORTEUR'S REPORT: SESSION 4
B. Bariskow (1996)
10.1016/0956-7151(94)90410-3
In situ scanning tunneling microscopy of three-point bending investigations
Th. M. Fries (1994)
Influence of finishing treatment parameters of complex surfaces using free abrasive on their roughness
V. N. Efimov (1991)
Digital speckle pattern interferometry applied to a surface: Optical Engineering v
Lehman (1995)
Moulding sand based on cellolignine: Liteinoe Proizvodstvo
V. A. Rudenko (1995)
Spectroscopic determination of surface topography using acoustic surface
L. L. Morgan (1974)
Simultaneous AES-SIMS Measuring Method: Proc.of the Int.Vac.Congr, 7th, and the Int.Conf. on Solid Surf
G. Kaus (1977)
Stylus measurement of the microgeometry of a coated surface
M. J. King (1978)
10.1115/1.2792148
Effect of Interface Roughness on Fatigue Crack Growth in Sn-Pb Solder Joints
Jian Shang (1995)
10.1109/ROBOT.1995.525433
A method for controlling tactile sensation of surface roughness using ultrasonic vibration
Toshio Watanabe (1995)
Effect of metal surface roughness on the frictional properties of resins
Klein (1995)
10.1016/0921-4526(94)01119-L
The dissipative dynamics of the 3He A-B interface in finite geometries
Peter Kostaedt (1995)
10.1063/1.338833
Effects of cathode surface roughness on the quality of electron beams
Yue Ying Lau (1987)
Experimental and numerical study of sand-steel interfaces: International Journal for Numerical and Analytical Methods in Geomechanics v
Tejchman (1995)
10.1051/rphysap:01990002506050900
Perturbations et propriétés holdériennes en traitement de signal
Claude Tricot (1990)
THE EFFECT OF IRREGULAR SURFACE ROUGHNESS ON THE FRICTIONAL RESISTANCE OF SHIPS
Rolf I. Karlsson (1978)
ShiShung, Machinability of hypereutectic Al-Si alloy fabricated by rapid solidification process: Keikinzoku/Journal of Japan Institute of Light Metals v
Yan (1993)
Machine visualization of synoptic topography by digital image processing, Chapter B in Wiltshire, D.A., eel
R. J. Pike (1992)
10.1243/PIME_PROC_1990_204_076_02
Use of Profilometric Measurements in Cavitation Erosion and Corrosion Studies
Robert J. K. Wood (1990)
Hydraulic resistance of a two-phase flow in a tube with a porous coating: Teplofizika Vysokikh Temperatur v
A. B. Andrianov (1994)
Sources of error in comparative
H. J. Becker (1969)
10.2166/wst.1995.0296
Relative importance of mean velocity and bed shear on biofilm accumulation in open-channel flows
Y. Lam Lau (1995)
Determining surface finish of workpieces by means of surface standards: Microtecnic
J. Haesing (1961)
Ovseenko, Surface roughness with diamond grinding
V. M. Terekhov (1986)
Influence of part material on the results of measurement of the roughness parameters R by the reflectometric method: Industrial Laboratory (USSR), V.50
B. L. Dvinyaninov (1984)
Improving gear manufacturing quality with surface texture measurement: Gear Technology v
Moyer (1993)
surfaces by a phase-conjugate method: Ultrasonics v
Nakazono (1995)
10.1038/234278a0
Spectral Analysis
G. F. Lothian (1971)
Influence of strength of the carbide and nitride ceramics on power consumption of their grinding and roughness of machined surface: Sverkhtverdye
A. A. Sukhobrus (1995)
10.1016/S0007-8506(07)62765-6
The Analysis of the Three Dimensional Topography of the Grinding Process
Ken J. Stout (1989)
10.1117/12.944964
Direct Comparison Of Mechanical And Optical Measurements Of The Finish Of Precision Machined Optical Surfaces
Eugene L. Church (1984)
10.1016/0043-1648(79)90146-7
Definition and measurement of pavement surface roughness
Rudolph R. Hegmon (1979)
Linear Bearing Portion of a Surface Profile: Przegl
Ciesielski (1976)
10.1016/S0007-8506(07)62526-8
A Study of Chip Surface Characteristics during the Machining of Steel
Vellore Venkatesh (1993)
10.1557/PROC-367-471
Sedimentation to Form Rough, Quasi-One-Dimensional Interfaces
James V. Maher (1994)
10.1016/0304-8853(94)00143-X
CRITICAL ISSUES ON PASS WEAR DURABILITY FOR CoCr PERPENDICULAR FLEXIBLE DISKS
Yasunori Motomura (1994)
10.1016/S0007-8506(07)60982-2
Characteristics of Two Dimensional Surface Roughness — Taking Self-Excited Chatter Marks as Objective
Hisayasu Sato (1981)
10.1016/S0007-8506(07)61224-4
Study on Mechanism of Ceramics Grinding
Kyoji Kitajima (1992)
10.1016/0022-0248(94)00572-9
Bulk and surface stoichiometry of vapor grown mercuric iodide crystals
Markus Schieber (1995)
Recent development
K. 1966. Yamamoto (1966)
10.1016/0043-1648(75)90277-X
Recent advances in the measurement and analysis of surface microgeometry
Thomas Ronald Thomas (1975)
10.1021/la00032a017
Experimental study of a nanometric liquid bridge with a surface force apparatus
Jérome Crassous (1993)
10.1002/pssa.2211530108
Investigation of the grain boundary elemental composition of the low-alloy steel
Arkady M. Ilyin (1996)
Selecting laminates using 'fitness for use' criteria: Surface
Sober (1995)
Friction and surface measurement
D. J. Whitehouse (1988)
Hogmark: Correlation between groove size, wear rate and topography of abraded surface: Wear, V.115
S. Jacobson (1987)
Modeling and analysis of sonar backscatter intensity for ocean bottom classification: Oceans
Zietz (1995)
Non-contact, optically based measurement of 85
K. I. Jolic (1998)
10.1016/0039-6028(96)00196-3
Secondary electron imaging of nucleation and growth of GaAs
Yoshikazu Homma (1996)
10.1016/0043-1648(85)90216-9
Multiparameter representation of surface roughness
Bogdan Nowicki (1985)
10.1016/0736-5845(93)90026-G
SELECTION PROCEDURES FOR MANUFACTURING PROCESSES FOR DESIGN ENGINEERS
Jeroen C. M. van den Molengraaf (1993)
10.1016/0038-1098(92)90310-6
Radiative and non-radiative decay of surface plasmons in thin metal films
Shady Negm (1992)
10.1109/ROBOT.1992.220259
Robotic exploration of surfaces and its application to legged locomotion
Pramath Raj Sinha (1992)
10.1557/PROC-407-349
Verification and Application of a New Adsorption Model for Fractal Surfaces
Ronald A Segars (1995)
10.1016/0043-1648(79)90053-X
A simple estimation of the elastic-plastic deformation of contacting asperities
Hiroyuki Ishigaki (1979)
10.1016/1044-5803(91)90039-7
Computer-aided fractal analysis of rubber wear surfaces
Peter R. Stupak (1991)
10.1002/ls.3010030105
Acceleration of wear of steel with fatty acid and oxygen under rolling with sliding partial EHD conditions
Masayuki Masuko (1990)
10.1115/1.3184477
In-Process Measurement of Surface Roughness in Turning by Laser Beams
Minoru Shiraishi (1981)
10.1002/pssa.2211530103
A thermal neutron interferometer of the Fabry-Perot type
Ariel Caticha (1996)
10.1049/el:19960298
UV light induced selective etching in borosilicate glasses for micropatterning
Jae Hyun Kyung (1996)
10.1109/RADAR.1995.522584
Specular multipath from rough correlated surfaces
Ilan Rusnak (1995)
10.1243/PIME_PROC_1986_200_112_02
A Characterization of Surface Texture Profiles
D. J. Mulvaney (1986)
10.1063/1.115921
Huge birefringence in selectively oxidized GaAs/AlAs optical waveguides
Andrea Fiore (1996)
10.1029/92RS00195
Derivation of phase statistics from the Mueller matrix
Kamal Sarabandi (1992)
10.1016/0924-0136(95)01892-1
Cutting fluids: Part I. Characterisation
M. A. El Baradie (1996)
10.1016/0304-3991(92)90262-I
The whip motion of ultra-thin tunneling tips
W. Hanrieder (1992)
10.1016/0041-2678(73)90143-7
Surface preparation of machine tool slideways and its influence on the contact stiffness
D. K. Pal (1973)
10.1016/0039-6028(96)00077-5
Surface structure sequences formed on Ag(001) with increasing alkali-metal coverages at room temperature
Masao Imaki (1996)
Bellingham, WA, p
Society for Optical Engineering v. (1727)
The derivation of quantitative surface data from gross sources: Surveying and Mapping
G. M. Goldberg (1962)
Large-eddy simulation of turbulent flow and heat transfer in plane and rib-roughened channels: International Journal for Numerical Methods in Fluids v
M. Cipfalo (1992)
An Experimental study of the Hertzian contact of surfaces covered with lON-plated
E. L. Sherbiney (1977)
Surface characterization Fractal dimensions, Hurst coefficients, and frequency transforms
J. C. Russ (1990)
Recent development of surface roughness measurement in Japan: Bull. Jap, oc
J. Nara (1974)
10.1016/0043-1648(79)90143-1
The measurement of surface texture and topography by differential light scattering
Eugene L. Church (1979)
10.1016/0043-1648(79)90107-8
An analysis of changes in surface topography during running-in of plain bearings
S. K. Roy Chowdhury (1979)
Fatigue crack properties of thermal reactor irradiated NIMONIC PE16
Douglas (1994)
Beta Functions for surface typologie?
D. J. Whitehouse (1978)
Relationships between the parameters of surface roughness after diamond grinding: Sverkhtverdye Materialy no. 2 Mar-Apr
E. V. Ryzhoy (1995)
Quasistationary roughness in case of pulse laser treatment of steels
S. A. Fedosov (1992)
10.1115/1.2831313
Study of Slider Dynamics Over Very Smooth Magnetic Disks
Shoji Suzuki (1996)
10.1016/0043-1648(86)90258-9
Measurement and characterization of multiscale surfaces
Donna Latrice Jordan (1986)
10.1088/0022-3735/15/12/017
Surface texture assessment errors of finishing processes caused by skid distortion
David J. Whitehouse (1982)
10.1080/00423119608968974
Optimal Preview Control of a Two-dof Vehicle Model Using Stochastic Optimal Control Theory
S. Senthil (1996)
10.1016/0043-1648(70)90099-2
Effect of stylus radius on the roughness values measured with tracing stylus instruments
Vm Radhakrishnan (1970)
10.1117/12.221324
Applications of laser scanning systems to deposited dielectrics
Chiles T. A. Larson (1995)
10.1016/0043-1648(86)90253-X
A surface roughness characterization system
Chun C. Lin (1986)
10.1109/20.490245
Quasi-contact testing of carbon nitride hard disk overcoats
Pei Guo Zou (1995)
10.1115/1.2841004
Transient Liquid Crystal Technique for Convective Heat Transfer on Rough Surfaces
Douglas N. Barlow (1997)
10.1088/0957-0233/5/6/011
Digital measurement of surface profiles by automated optical sectioning
T. A. Lloyd Davies (1994)
10.1016/0040-6090(93)90577-C
In and ex situ diagnostics of the growth of α-Ti thin films deposited by plasma-enhanced physical vapour deposition
H. Steffen (1993)
10.1117/12.225284
CFRP composites for optics and structures in telescope applications
Robert C. Romeo (1995)
10.1016/0038-1098(93)90182-M
Effect of interface roughness on non-linear vertical transport in GaAs/AlAs superlattices
Gohar Etemadi (1993)
10.1063/1.345712
Scanning tunneling microscopy on rough surfaces: Tip‐shape‐limited resolution
Guenter Reiss (1990)
FOURIER ANALYSIS OF SURFACE ROUGHNESS
Matthew Brock (1983)
10.1016/0017-9310(94)00361-X
The transitive temperature processes in local friction contact
A. A. Yevtushenko (1995)
10.1016/0043-1648(86)90275-9
Predicting the behaviour of lubricated bearings from surface measurements
Alan W. Bush (1986)
10.1016/0022-3093(96)00089-0
Role of hydrogen in the growth of hydrogenated microcrystalline silicon
Hajime Shirai (1996)
10.1016/0924-0136(92)90257-S
Evaluating the performance of “seeded gel” grinding wheels
J. Eranki (1992)
Formation of Ni(100)-AI surface alloy: Surface Science, v
D. J. O'Connor (1996)
Influence of preparation conditions on the properties of sputtered NdFe-B films
H. Lemke (1995)
10.1061/(ASCE)0733-947X(1995)121:3(300)
Effects of Routine Maintenance on Flexible Pavement Condition
Edward S. K. Fekpe (1995)
10.1364/JOSA.53.001389
Specular Reflectance of Aluminized Ground Glass and the Height Distribution of Surface Irregularities
Harold Earl Bennett (1963)
10.1063/1.344086
Interfacial roughness in InAs/GaAs heterostructures determined by soft x‐ray reflectivity
S. C. Woronick (1989)
10.1016/0043-1648(95)06825-2
A revised model for predicting surface roughness in turning
Wit Grzesik (1996)
10.1557/PROC-314-51
Reliability Factors in Ceramic/Metal Joining
Katsuaki Suganuma (1993)
10.1016/0040-6090(93)90365-V
Surface roughness of Mo films prepared by magnetron sputtering
Tomoaki Hino (1993)
10.1016/0040-6090(95)07029-X
Influence of interface roughness and quantum size effect on the giant magnetoresistance in magnetic layered structures
J. Barnas (1996)
10.1016/S0007-8506(07)61236-0
Structural Configuration and Performances of Machining Environment-Controlled Ultraprecision Diamond Turning Machine "Capsule"
Hidenori Shinno (1992)
10.1016/0304-8853(95)00214-6
Magnetostatic coupling in multilayered films
B. V. Gavrilyuk (1995)
10.1016/0167-6636(94)00068-9
Equilibrium surface roughness of a strained epitaxial film due to surface diffusion induced by interface misfit dislocations
Fjola Jonsdottir (1995)
10.1116/1.576351
Scanning tunneling microscopy of rough surfaces
David Robert Denley (1990)
10.1016/0043-1648(78)90093-5
Computer simulation of the contact of rough surfaces
Richard S. Sayles (1978)
10.1016/0278-6125(87)90020-3
Range expansion and automation of a classical profilometer
M. Chuard (1987)
10.1111/j.1365-2818.1989.tb02927.x
Scanning tunnelling microscopy measurements of carbon deposited on to graphite
Nobuyuki Nakagiri (1989)
10.1115/1.3140674
Surface Roughness Measurement With Fiber-Optics
Walter P. North (1983)
10.1002/pen.760340808
The use of flexural tests in the study of environmental stress cracking of polymers
John Charles Arnold (1994)
10.1117/12.945833
Core-Ring-Ratio Method For Surface Roughness Measurement
Cheng Lu (1988)
10.1016/0257-8972(95)02540-5
Influence of substrate roughness and temperature on the adhesion/cohesion of alumina coatings
M. Mellali (1996)
10.1016/0043-1648(79)90120-0
Analysis of the initial contact height when a curved body approaches a rough flat surface
Hiroyuki Ishigaki (1979)
10.1016/0169-4332(95)00586-2
Ferrimagnetic thin films prepared by pulsed laser deposition
Marcel Guyot (1996)
10.1029/JC075i012p02185
A laser profilometer
W. S. Olsen (1970)
10.1029/GL014i001p00029
Roughness of natural fault surfaces
William L. Power (1987)
10.1016/0008-6223(96)00180-7
Surface fractal dimension of graphitized carbon black particles
Wei Xu (1996)
10.1016/0043-1648(95)06827-9
Modeling of microfracture-induced wear and wear transition in sliding of polycrystalline alumina ceramics
Hai Yan Liu (1996)
Study of squeeze film between non-normal rough surfaces under partial hydrodynamic lubrication
Cheng (1992)
10.1016/0142-727X(95)00013-G
Investigation of the effect of a smooth strip on rough-wall turbulent boundary layers
Walid Chakroun (1995)
Study of plastic deformation of a single rough surface microasperity
Chepovetskii (1986)
Methods of surface roughness measurement: Modern Castings (New 1 9 Pike & Thomas
E. Swing (1998)
Simulation of the lubricant of isotropically rough surfaces: ASLE
Tonder (1980)
10.1016/0043-1648(91)90208-C
A numerical model for the elastic contact of three-dimensional real rough surfaces
Liang Xian (1991)
10.1016/0016-0032(96)00009-9
The effect of an air gap on the coupling between two planar microstrip lines
Atef Z. Elsherbeni (1996)
Spark irradiance against vibration as a measure of grinding performance: Journal of the Institution of Engineers (India)
S.M.A. Suliman (1995)
Khodorkovskij, Ya.S., A semi-empirical scheme of pressure pulsation calculations under the turbulent boundary layer: Akusticheskii
V. B. Amfilokhiev (1994)
Ganss, The influence of nominal contact area planform on friction force
Chetwynd (1982)
Hen/Transactions of the Japan Society of Mechanical Engineers
C Gakkai Ronbunshu (1994)
Emissivity of a statistically irregular surface taking into account multiple scattering
D. V. Milhailqva (1993)
Prediction of film thickness and friction at a rotary pump blade and liner interface: Tribology
Sui (1995)
10.1557/jmr.1995.1984
INFLUENCE OF SURFACE-ROUGHNESS ON THE WETTING ANGLE
Xiao bo Zhou (1995)
Elusive mask defects, reflectivity variations
Reynolds (1995)
Effect of tension flex levelling on mechanical properties and formability of sheet steel: Stal' no
Mazur (1992)
Further research on
Y Gilbert (1975)
Photoluminescence study of electron 1 13 Pike & Thomas
Shimizu (1998)
Quick, non-destructive method for measuring surface finish using capacitance: Carbide
Risko (1981)
A Practical Guide to the Assessment of Surface Texture: Feinpruf Perthen
M. Sander (1991)
Quartz ceramics roller production: Steklo i Keramika
A. M. Akh'yan (1992)
Polysilicon surfacemodification technique to reduce sticking of micrpstructures: Sensors and Actuators, A, Physical, v
Yee (1996)
On the regularities of the microrelief changes of an anodically oxidized aluminium surface: Zashchita
A. V. Korotkevich (1992)
Growth-induced interface roughness of GaAs/AIAs-layers
Processes (1996)
Review of topography of machine surfaces
D. J. Whitehouse (1973)
Effect of cylinder surface finish
E. T. 1960. Jagger (1960)
Light scattering from fractal surfaces: Journal of Computer-Assisted Microscopy
Russ (1993)
Optical methods for rough surface measurements: Tribos
F. Berny (1976)
Tool flank wear in single point diamond turning
J. S. Strenkowski (1993)
10.1016/0043-1648(85)90078-X
Effects of profile, roughness and friction on contacting bodies in compression
Nicholas J. Salamon (1985)
10.9753/icce.v24.%p
EFFECT ON ROUGHNESS TO IRREGULAR WAVE RUN-UP
Jea-Tzyy Juang (1995)
Bearing fluctuational spectra of a low-altitude source moving over rough surface: Izvestiya VUZ
N. V. Gorbach (1992)
10.1098/rspa.1984.0050
A unified theory of surface roughness
Joseph A. Greenwood (1984)
Atomic force microscopy surface morphology studies of 'in situ'deposited polyaniline thin films: Synthetic Metals v
Avlyanov (1995)
Simulational study of granular boundary flows in two dimension: Computational Materials
Kim (1995)
Application of pneumatic gauging to the measurement of surface
M. Graneek (1952)
10.1016/0043-1648(66)90144-X
The effect of surface finish on the creep and wear of a rolling ball subjected to normal and tangential surface tractions
John Halling (1966)
10.1007/BF00687278
The use of force modulation microscopy to investigate block copolymer morphology
Jen-Yeu Chen (1996)
10.1063/1.359438
Effect of the surface roughness on the spectral distribution of photoemission current at the silver/solution contact
Robert Kostecki (1995)
10.1007/BF02648641
Adhesion mechanisms of arc-sprayed zinc on concrete
J. G. Legoux (1995)
10.1007/BF00354229
Shear strength resulting from static friction of some thermoplastics
S. M. H. Benabdallah (1993)
10.1061/(ASCE)0733-9437(1994)120:1(27)
General Formulation of Best Hydraulic Channel Section
Parviz Monadjemi (1989)
10.1115/1.3138198
Human joint performance and the roughness of articular cartilage.
T. R. Thomas (1980)
10.1016/0039-6028(95)00089-5
High resolution electron microscopy study of as-grown, crushed and cleaved C60 crystals
Ning Wang (1995)
10.2493/jjspe.59.72
Development of Silicon Acoustic Lens.
Shinji Tanaka (1993)
10.1016/0030-4018(95)00756-3
Notes on localization of surface-plasmon-polaritons
Maxim Arnold (1996)
10.1163/156856194X00122
Improvement of adhesion of Co-Cr layers by plasma surface modifications of the PET substrate
Gerd Dr Fischer (1994)
10.1111/j.1365-2818.1988.tb01428.x
Limits of topographic measurement by the scanning tunnelling and atomic force microscopes
Margaret R. Stedman (1988)
10.1016/0039-6028(95)00015-1
Studies of LaAlO3“100” surfaces using RHEED and REM. II: 5 × 5 surface reconstruction
Zhong Lin Wang (1995)
10.1016/0020-7357(73)90003-6
Effect of side flow on the straightness of the ridge and the surface roughness
M. S. Selvam (1973)
Calibration of Manning's Roughness for a River Reach
Cassie C. Klumpp (1993)
10.1557/S0883769400035296
Strain-Induced Modulations in the Surface Morphology of Heteroepitaxial Layers
Anthony George Cullis (1996)
10.1016/0020-7683(95)00191-3
Anti-plane elastic wave scattering from a rough volumetric crack
Per-Åke Jansson (1996)
10.1061/(ASCE)0733-9429(1996)122:1(19)
Numerical Model of Flow in Ice-Covered Channel
Jin Yue Yoon (1996)
10.1016/0043-1648(91)90293-4
Dynamics of dual film formation in boundary lubrication of steels part II. Chemical analyses
Btilent Cavdar (1991)
10.1049/el:19950891
Polarisation-independent phased-array demultiplexer on InP with high fabrication tolerance
Hans Bissessur (1995)
10.1115/1.3451629
Statistical Analysis of Mechanical Interaction of Rough Surfaces
Prem Kumar Gupta (1972)
10.1149/1.2054670
In Situ Atomic Force Microscopy Study of the Plating and Stripping of Silver
Krzysztof Kowal (1994)
10.1016/0017-9310(74)90082-9
THERMAL CONTACT CONDUCTANCE; THEORETICAL CONSIDERATIONS
Bora B. Mikic (1974)
10.1016/S0007-8506(07)62259-8
Contactless Surface Measurement with a New Acoustic Sensor
Gert Goch (1994)
10.1088/0950-7671/17/7/302
An optical smoothness-meter for evaluating the surface finish of metals
James Carrie Guild (1940)
10.1016/0304-8853(95)00866-7
Status and limitations of multilayer X-ray interference structures
Jeffrey B. Kortright (1996)
10.1088/0022-3727/27/5/024
Peening in ion-assisted thin-film deposition: a generalized model
G. Carter (1994)
10.1016/0022-3093(95)00564-1
X-ray reflectivity: a new tool for the study of glass surfaces
Jean Michel Grimal (1996)
10.1016/0043-1648(72)90302-X
Cylinder bore surface roughness in internal combustion engines: Its appreciation and control
Joe C. Campbell (1972)
10.1243/PIME_PROC_1985_199_124_02
Identification of Surface Roughness
D. J. Mulvaney (1985)
10.1088/0026-1394/21/3/005
Surface Roughness Standards, Obtained with the Scanning Tunneling Microscope Operated at Atmospheric Air Pressure
Nancy García (1985)
10.1016/0921-4526(95)00906-X
Orientation dependence of homoepitaxy: An in situ X-ray scattering study of Ag
W. Crawford Elliott (1996)
10.1016/0141-6359(94)00001-G
Development of directionally aligned SiC whisker wheel
Katsumi Yamaguchi (1995)
10.1007/BF00619545
Surface roughness measurements from coherent light scattering
Peter Chandley (1976)
10.1016/0043-1648(82)90058-8
An improved method for analysing surface topography information
D. J. Mulvaney (1982)
10.1051/jp4:19945241
Modelling of sound scattering by the sea floor
Anatoliy N. Ivakin (1994)
10.1016/0039-6028(94)00752-7
Direct imaging of the tip shape by AFM
Fachri Atamny (1995)
Raw Water Cement-Mortar Lined Pipeline Corrosion A Case Study
Charles F. Anderson (1994)
10.1088/0370-1301/67/4/305
The True Contact Area Between Solids
J. Dyson (1954)
10.1143/JJAP.29.744
Simulations of STM images and work function for rough surfaces
Nobuyuki Nakagiri (1990)
10.1016/0043-1648(93)90287-V
Coating thickness and surface roughness of TiN-coated high speed steel in relation to coating functionality
Kobus de Bruyn (1993)
10.1016/0043-1648(95)90047-0
Using profilometry for the quantitative assessment of tribological function : PC-based software for friction and wear prediction
Andrew Torrance (1995)
10.1142/S0218348X94000600
COMPARISON OF SEVERAL METHODS FOR CALCULATING FRACTAL-BASED TOPOGRAPHIC CHARACTERIZATION PARAMETERS
William A. Johnsen (1994)
10.1115/1.3261185
A Numerical Model for the Elastic Frictionless Contact of Real Rough Surfaces
Martin N. Webster (1986)
10.1002/pssa.2211310116
Topography of sputtered semiconductor surfaces by STM in Air
S. Zekorn (1992)
10.1016/S0007-8506(07)62475-5
Ultraprecision Grinding of Optical Glasses to Produce Super-Smooth Surfaces
Yoshiharu Namba (1993)
10.1016/0043-1648(95)90025-X
Surface topography evolution during sliding wear of 2009 Al-SiCp/17-4 PH
Anthony P. Sannino (1995)
10.1115/1.2920686
Effect of Roughness and Sliding Friction on Contact Stresses
David M. Bailey (1991)
10.1243/PIME_CONF_1967_182_345_02
Investigation of the behaviour of sliding surfaces of machine tools
Herwart Opitz (1967)
10.1088/0022-3727/3/3/306
Establishment of contact parameters from surface profiles
Tom R Thomas (1970)
10.1016/0141-6359(94)00016-S
Analysis of molecular scale roughness effect on contact of solids based on computer modeling
Sergei A. Chizhik (1995)
10.1016/0924-0136(94)01657-M
Preliminary study of ultrasonic drilling of fiber-reinforced plastics
H. Hocheng (1995)
10.1016/S0007-8506(07)61221-9
A Neural Network Approach to the Decision-Making Process for Grinding Operations
Moriaki Sakakura (1992)
10.1080/10402009608983564
Granular Collisional Lubrication: Effect of Surface Roughness, Particle Size and Solids Fraction
Chih-Ming Yu (1996)
10.1109/IROS.1995.525878
Reflexive responses to slipping in bipedal running robots
Gary N. Boone (1995)
10.1016/0020-7357(63)90002-7
Measuring the finish of rough surfaces
Moshe M. Barash (1963)
10.1016/0167-2789(89)90196-6
Growth of self-affine surfaces
János Kertész (1989)
10.2351/1.5058420
Laser scatter surface finish measurement techniques
Kevin George Harding (1991)
10.1016/S0020-7403(62)80005-8
A study of the effect of applied pressure on surface contact area
Gordon William Cunningham (1962)
10.1007/BF00818449
Investigating the microgeometry of the block gauges' working surfaces
F. M. Solodukho (1975)
10.1063/1.113055
Evaluation of the scaling exponent of self‐affine fractal surface from a single scanning probe microscope image
M.R.K. Rao (1994)
10.1016/0043-1648(92)90187-D
Phase shift of the reflection coefficient of ultrasonic waves in the study of the contact interface
Jerzy Królikowski (1992)
10.1016/0030-4018(95)00368-1
Scattering by fractal surfaces with an outer scale
Colin J. R. Sheppard (1996)
10.1149/1.2100544
The Evolution of Si / SiO2 Interface Roughness
Altaf Hyder Carim (1987)
A HIGH-SPEED ROAD PROFILOMETER - PRELIMINARY DESCRIPTION
Reed Dickerson (1976)
10.1115/1.2920588
Fractal Model of Elastic-Plastic Contact Between Rough Surfaces
Arun Majumdar (1991)
10.1117/12.962814
Measuring Surface Profiles With The Scanning Tunneling Microscope
Virgil B. Elings (1989)
10.1007/978-1-349-01857-4_12
Some Static and Dynamic Characteristics of Bonded, Machined Joint Faces
R. H. Thornley (1973)
Laser fusion cutting of stainless steel with a pulsed Nd.YAG laser, Welding
M. Geiger (1994)
Balazs Analytical Laboratory, Sunnyvale, CA, p
Chemicals Conference (1994)
10.1115/1.3656572
Effects of Two-Dimensional, Sinusoidal Roughness on the Load Support Characteristics of a Lubricant Film
Ralph A. Burton (1963)
Effects of wall perturbations on thermo-turbulent
Burton (1994)
Surface mechanics: John Wiley, New York
F. F. Ling (1973)
Fractals and surfce roughness, in International Colloquium on Micro- and Nanotechnology, 4th, Vienna, November 26, Proceedings: 10-p
T. R. Thomas (1997)
Effect of friction with the collecting surface on the build-up mass in the axial HGMS configuration: Magnetic and Electrical Separation v
N. Rezlescu (1995)
Scanning tunneling microscopy studies of thin foil Xray mirrors
Gamaes (1990)
Comparison of capacitance and stylus measurements of surface roughness
A. G. Lieberman (1988)
Description and observation of metal
S. Way (1969)
10.1016/0924-0136(95)02032-2
AN ENERGY-DISTRIBUTION STRATEGY IN FAST-CUTTING WIRE EDM
Yuan Fang Luo (1995)
Surface characterization by topographic feature extraction and discriminant function analysis: Proc. of the C.I.R.P
H. T. McAdams (1973)
Substrates for tribological coatings: Plating and Surface Finishing v
Mattox (1995)
Surface finishing and surface condition prior to coating: SME
Fritt (1979)
New optical method for fast, contraction roughness measurement of surfaces: Optik (Stuttgart
K. Leonhardt (1981)
Additional requirements for quality of surfaces of rolls for microband
V. A. Nikolaev (1995)
Refined surface finishes, their production and properties: The Iron and Coal
W. Johnson (1948)
Methods for characterising surface topography
T. V. Vorburger (1992)
Examination of surfaces Permanent'records by use of negative reproduction of surfaces by plastic castings
J. W. Sawyer (1949)
Geometric quality of end mills and the surfaces which they produce
L Peri (1992)
Gerstorfer and H. Paisdzior, Optical surface roughness measurement In practise
R. Brodmann (1984)
Capacitance-based Surface Texture Measuring System
Brecker (1977)
Narayanamurthi, Analysis of surface reproduction characteristics of different replica materials: Wear
K. Narayanasamy (1979)
IEEE, Piscataway, NJ, 5TH8070
Industrial Automation (1995)
Nonlinear dynamic systems in surface metrology
P. J. Scott (1989)
A new surface roughness standard fabricated using silicon technology
J. Berger (1988)
Investigation on p. -no. junction etch stop: Sensors and Actuators, A
Wu (1993)
10.1111/j.1151-2916.1989.tb05954.x
Quantitative Analysis of Brittle Fracture Surfaces Using Fractal Geometry
J. J. Jr Mecholsky (1989)
Analysis of dynamic characteristics of hydrodynamic journal bearings with isotropic roughness effects: Wear v
S. K. Guha (1993)
Combined methods for controlling roughness parameters: Soviet Engineering
R. Vitenberg (1983)
Surface finish.Effect on fatigue strength
W. K. Wilson (1945)
Determination of Roughness by Correlatin Speckles in the Image of the Diffusing Surface: Opt.Commun v
M. Menu (1977)
Kourova, Correlation between surface topography and profile statistical parameters: Wear
V. V. Izmailov (1980)
Gloss meter for surface evaluation: J.lnst.Eng
S. K. Vashisht (1975)
Contamination and cleaning of GaAs-(IOO) surfaces: Materials
K. Gutjahr (1995)
Roughness measuring device for controlling grinding processes
E. Salje (1979)
Assessing the quality of very fine surfaces - a coming breakthrough for light reflection photo - electrical methods?
J. Westberg (1973)
Runwen, Precision evaluation of a common-path interferometer in measurement of optical surfaces: Guangxue Xuebao/Acta Optica
Lin (1994)
10.1007/BF02648633
Study of Cr2O3 coatings Part I: Microstructures and modulus
Craig M. Richard (1995)
Influence of the surface structure of titanium materials on the adhesion of fibroblasts: Biomaterials, v
E. Eisenbarth (1996)
Thermal contact resistance of wavy surfaces: Revista Brasileira de Ciencias Mecanicas/Journal of the Brazilian Society of Mechanical Sciences v
Torii (1995)
10.1109/TSMC.1984.6313276
Metal surface inspection using image processing techniques
Hon-Son Don (1984)
10.1002/sia.740231103
Partial intensity analysis (PIA) for quantitative electron spectroscopy
Wolfgang S. M. Werner (1995)
10.1002/polb.1994.090321010
Surface stress-dependent adhesion to fluorinated polymers
Robert R. Rye (1994)
10.1115/1.3261350
Effect of a Rough Translating Surface on Gas Film Lubrication: A Numerical and Analytical Study
Jonathan W. White (1987)
Evaluating the variability of ceramics with x-ray fluorescence
Patricia L. Crown (1984)
10.1016/0001-8686(93)80021-3
Non-equilibrium electric surface phenomena
Stanislav S. Dukhin (1993)
10.1115/1.3453384
Measurements of the Statistical Microgeometry of Engineering Surfaces
Richard S. Sayles (1979)
10.1016/0378-4371(89)90367-1
Heterogeneous media and rough surfaces: A fractal approach for heat diffusion studies
Danièle Fournier (1989)
10.1115/1.3438357
Prediction of Objective Passenger Comfort From Road Profile
William H. Park (1974)
10.1115/1.3261945
Fully Developed Sliding of Rough Surfaces
Chia-Jyi Liu (1989)
10.1061/(ASCE)0733-9372(1993)119:1(90)
Comparison of physical transport processes in noncohesive river sediments
Danny D. Reible (1993)
Surface roughness characteristics for a mine airway in the sunshine mine
Indu Mohan Konduri (1993)
10.1016/0043-1648(79)90144-3
Roughness measurement with a laser scanning analyser
G. M. Clarke (1979)
10.1016/S0043-1648(97)00266-4
Three dimensional fractal analysis of sheet metal surfaces
A. Othmani (1998)
10.1115/1.3453283
A General Theory for Laminar Lubrication With Reynolds Roughness
Harold G. Elrod (1979)
10.1021/la00013a051
The molecular-kinetic theory of wetting
Robert A. Hayes (1994)
10.6028/nist.ir.89-4088
Surface finish metrology tutorial
Theodore V. Vorburger (1990)
10.1016/0022-0248(94)00548-6
In-situ observation of GaAs selective epitaxy on GaAs (111)B substrates
Francesco Allegretti (1995)
10.1016/0378-5963(84)90042-4
Fractal dimension as working tool for surface-roughness problems
Peter Pfeifer (1984)
10.1364/AO.34.000213
Scanning force microscope as a tool for studying optical surfaces.
J. Michael Bennett (1995)
10.1016/0043-1648(84)90102-9
On the use of a modular system for microtopographical surface measurement
M. Chuard (1984)
10.1016/0141-6359(81)90004-0
Surface topography and rolling element vibration
Richard S. Sayles (1981)
10.1117/12.944965
Survey Of The Finish Characteristics Of Machined Optical Surfaces
E L. Church (1984)
10.1117/12.51126
Estimation of plastic strain by fractal
YuZhong Dai (1991)
10.1080/10402009608983503
Behavior of Elastic-Plastic Rough Surface Contacts as Affected by Surface Topography, Load, and Material Hardness
Si C. Lee (1996)
10.4271/700144
Surface Finish Testing - The Present State-of-the-Art and Its Future
Eric Schneider (1970)
10.1016/0041-2678(70)90056-4
Physical techniques for examining surfaces
T. F. J. Quinn (1970)
10.1016/0043-1648(81)90156-3
Surface condition monitoring of grinding wheels by pneumatic back-pressure measurement
J. F. Rahman (1981)
10.1016/0043-1648(79)90148-0
Digital filtering of surface profiles
Jay Raja (1979)
10.1016/0043-1648(76)90095-8
An analysis of the reference lines of the surface profile and its true replica
M. S. Shunmugam (1976)
10.1117/12.60558
Optical estimation of fractal dimension for image assessment
Samuel P. Kozaitis (1992)
10.1016/0039-6028(95)00416-5
Electrochemical surface conditioning of n-Si(111)
Joerg Rappich (1995)
10.1115/1.3261348
An Elastic-Plastic Model for the Contact of Rough Surfaces
Wen Rui Chang (1987)
10.1117/12.956917
Machine For The Rapid And Accurate Measurement Of Profile
Margaret Stedman (1979)
10.1029/JB090iB14p12575
Broad bandwidth study of the topography of natural rock surfaces
Stephen R. Brown (1985)
10.1364/JOSA.53.001394
Relation between the Height Distribution of a Rough Surface and the Reflectance at Normal Incidence
J. O. Porteus (1963)
10.1163/156939396x00522
Experimental studies of millimeter-wave scattering in discrete random media and from rough surfaces - Summary
Yoshikazu Kuga (1996)
10.1016/0022-1694(93)90270-J
A model for phase lag of secondary flow in river meanders
Jinhong Zhou (1993)
10.1088/0960-1317/4/1/003
The formation of very flat silicon sidewalls by dry etching
Andreas Bertz (1994)
10.1021/la980673j
Effect of Surface Structure on the Spreading of a PDMS Droplet
Stina Gerdes (1998)
On the oblique incidences type
H. Wada (1966)
Transfer and wear of nylon and CuS-nylon composites, filler proportion and counterface characteristics: Wear v
S. Bahadur (1993)
A review of the recent studies on fractals in rock physics
O. Nishizawa (1988)
10.1061/(ASCE)0733-9429(1993)119:6(742)
Application of Probability and Entropy Concepts in Pipe-Flow Study
Chao‐Lin Chiu (1993)
10.1016/0043-1648(83)90093-5
Limits of applicability of elastic contact models of rough surfaces
John I. McCool (1983)
10.1016/0043-1648(86)90247-4
Roughness measurement of ground, turned and shot-peened surfaces by the light scattering method
Rainer Brodmann (1986)
10.1016/0020-7403(80)90048-X
The contact and friction between flat belts and pulleys
Thomas Childs (1980)
10.1016/0043-1648(76)90182-4
The effect of the size of the nominal area on the contact behaviour of surfaces
Kenji Nuri (1976)
Replica method for evaluating finish of a metal
H Herschman (1945)
10.1016/0141-6359(81)90041-6
Use of a profilometer for surface mapping
B. Snaith (1981)
The application of an electronic computer to the study of surface measurement: Automatisme
R. E. Reason (1964)
10.1016/0043-1648(77)90177-6
An investigation of ground wood surfaces as related to pulp and stone characteristics
David A. Dornfeld (1977)
Sight TM, a whole-field optical technique for determination of surface form deviation
T. R. Pryor (1988)
10.1016/0927-7757(95)03140-9
Fractal analysis of the surfaces of anisometric pigment particles
Robert Rhodes Mather (1995)
Modeling of piston secondary dynamics and tribology: Proceedings - Society of Automotive Engineers no. P-256
Keribar (1992)
ASCE, New York
Solving Probl (1994)
Shot blasting-A manufacturing method of surface finishing technology: Blech Rohre Profile v
Bahlmann (1981)
Optical measurement of the roughness and waviness of finish-machined surfaces: Werkstatt, V.119
R. Brodmann (1986)
A crosswind response of reinforced concrete chimneys: Journal of Wind Engineering and Industrial Aerodynamics v
Cheng (1992)
Surface analysis for measurement of pigment agglomeration in rubber
A. N. Tabenkin (1988)
10.1115/96-GT-388
Computational Prediction of Heat Transfer to Gas Turbine Nozzle Guide Vanes With Roughened Surfaces
Shengmin Guo (1996)
Comparison of the friction characteristics of friction pairs with various surface roughnesses
E. P. Krevsun (1984)
Surface roughness measurement: Werkstatt
Burrow (1980)
Statistical method for determining temperature fields in rubbing bodies.2
T. V. Korochkina (1989)
Near-wake characteristics of 2-D obstacles in tandem In a simulated atmospheric boundary layer: Measurement and Modeling of Environmental Flows
S. S. Rangaraj (1992)
The application of 3-D topography to engine bore surfaces: Surface Topography
E. J. Davis (1988)
Heat transfer in bulk material at a low bed depth under exposure to impacting jets of air
K. K. Bofah (1992)
Automatic levelling of profile measuring systems: S.M.E
G. P. Wilson (1974)
Area! Fourier analysis of surface topography.Part 1, Computational methods and sampling considerations
I. Sherrington (1990)
Lambda ratio - a critical reexamination: Wear v
P. Cann (1994)
10.1016/0304-3886(95)00035-9
Changing of HDPE film due to surface effects during fabrication
Tetsuji Oda (1995)
10.1117/12.145536
Improving the quality of fiber-optic-based surface-roughness sensing instrument using robust design methodology
Devdas Shetty (1993)
Aluminium content and its effect on MBE-grown AI//xGa//1// minus //xAs surfaces: Journal of Electrical and Electronics Engineering, Australia v
S. F. Yoon (1993)
Quantitative evaluation of microstructure in Si//3N//4/SiC platelet and paniculate
G. Pezzotti (1998)
Sackfield, Mechanics of elastic contacts: ButterworthHeinemann
D. A. Hills (1993)
The measurement of ship hull
M. J. King (1982)
Application of a statistical
March (1966)
Comparative wear
Kjeldsteen (1996)
STM study of molecular-beam epitaxy growth of GaAs: Journal of Crystal Growth v
E. G. Orr (1993)
10.1080/10402009408983337
The Subsurface Stress Field Created by Three-Dimensionally Rough Bodies in Contact with Traction
Si C. Lee (1994)
Current Advances in Surface Characterization: ASNE Pap no. 76-DET-88 for Meet
Eiss (1976)
The nature of polished and burnished surfaces: Proc.Int
E. Rabinpwicz (1973)
10.1115/1.2920944
On the effects of roughness orientation : a mapping and double scale analysis of flow factors
Sy-wei Lo (1992)
10.2514/6.1992-269
Modeling supersonic inlet boundary layer bleed roughness
Gerald C. Paynter (1992)
10.1002/pssa.2211010218
The interpretation and reconstruction of images in scanning tunneling microscopy
Joan Abellán (1987)
Effect of surface topography on the electrode-electrolyte interface impedance.2. The low frequency (f < 1 Hz), small signal, interface impedance - A review
E. T. McAdams (1989)
10.1119/1.1933017
The Friction and Lubrication of Solids
Frank Philip Bowden (1964)
10.1115/1.3453210
Lubrication of Surfaces Having Area-Distributed Isotropic Roughness
Kristian Tønder (1977)
10.1016/0890-6955(92)90067-Q
Parameters for evaluating the wearing behaviour of surfaces
H. Böhm (1992)
10.1016/0008-6223(94)90195-3
Study of carbon fiber surfaces by scanning tunneling microscopy, part III. Carbon fibers after surface treatments
Ren-Yan Qin (1994)
10.1007/BF00278157
Lapping of composite of Y-TZP and Ce-TZP
Thambu Sornakumar (1994)
10.1017/S0022112095004320
Local measurements of velocity fluctuations and diffusion coefficients for a granular material flow
V. V. R. Natarajan (1995)
10.1016/0043-1648(92)90281-C
Digital image processing techniques, fractal dimensionality and scale-space applied to surface roughness
Stephen Vandenberg (1992)
10.1029/97RS02746
Radiometric and structural measurements of snow samples
Andreas Wiesmann (1998)
10.1016/0040-6090(94)06257-L
Optical and surface properties of spray-pyrolysed CdS thin films
Sunny Mathew (1995)
10.1115/1.2920578
A Numerical Solution for Calculating Elastic Deformation in Elliptical-Contact EHL of Rough Surface
Jen Fin Lin (1991)
10.1016/0093-6413(76)90006-9
The limit of elastic deformation in the contact of rough surfaces
Alan W. Bush (1976)
10.1115/1.2910594
Fractal Network Model for Contact Conductance
Arun Majumdar (1991)
10.1006/jsvi.1996.0249
ESTIMATION OF WHEEL/RAIL INTERACTION FORCES IN THE CONTACT AREA DUE TO ROUGHNESS
Paul James Remington (1996)
10.1557/S0883769400044869
Laser-Reflectance Interferometry Measurements of Diamond-Film Growth.
C. D. Zuiker (1995)
10.1016/0041-624X(89)90016-4
Model for the ultrasonic inspection of rough defects
Jill Audrey Ogilvy (1989)
10.1016/0043-1648(81)90088-0
Effect of a skid on the accuracy of measuring surface roughness
Hiroyuki Ishigaki (1981)
10.1080/01431169208904274
A simulation of bidirectional reflectance distributions for various surface microstructures
Maxim Shoshany (1992)
10.1016/0167-6105(92)90427-C
Wind characteristics in the surface layer over heterogeneous terrain
Henry W. Tieleman (1992)
10.1007/BF00619823
Determination of the probability density function of height on a rough surface from far-field coherent light scattering
Peter Chandley (1979)
10.1080/10402009408983334
Study of Residual Stress Distribution in the Machined Stainless Steel Components
Dong Y. Jang (1994)
10.1088/0305-4470/19/8/006
Scaling of rough surfaces: effects of surface diffusion
Fereydoon Family (1986)
10.1016/0017-9310(94)90127-9
Design of surface microrelief with selective radiative properties
Anne Sentenac (1994)
10.1088/0963-9659/1/2/004
Interferogram analysis using a Fourier transform method for automatic 3D surface measurement
Christophe Gorecki (1992)
10.5254/1.3538663
Aggregate structure : effect on the agglomerate morphology and cohesivity
A. Drakopoulou (1994)
10.1002/sia.740100207
The space within a profile
Richard B. Zipin (1987)
10.2514/6.1989-1659
Predictions of contact parameters for thermally-distorted pressed joints
P. O'callaghan (1989)
10.1016/0043-1648(86)90034-7
Contact width and compliance between cylinders and rough plates
J. Kagami (1986)
10.4271/780064
THE DESIGN AND DEVELOPMENT OF A HIGHWAY SPEED ROAD PROFILOMETER
Ronald J. Chaka (1978)
10.1016/0043-1648(93)90266-O
Investigation of the hardening of a titanium alloy by laser nitriding
Mikhail Ignatiev (1993)
10.1016/0956-7151(93)90167-Q
Crack closure and residual stress effects in fatigue of a particle-reinforced metal matrix composite
Daniel M. Knowles (1993)
10.1007/BF01545044
Hydraulic studies of grass carpets for revetting canals
A. F. Dmitriev (1992)
10.1016/0166-3615(90)90002-7
A stylus/computer system describing three-dimensional engineering surfaces
Henri George (1990)
Test Cases for Canal Control Algorithms with Examples
Timothy F. Kacerek (1995)
10.1016/0043-1648(76)90129-0
The roughness of abraded metal surfaces
Robert Thomas Spurr (1976)
10.1016/0043-1648(83)90021-2
Measurement of surface roughness: Comparison between a defect-of-focus optical technique and the classical stylus technique
J. A. Mignot (1983)
10.1016/S0921-5956(90)80008-J
The scope of three dimensional topography
Edward J. Davis (1990)
Flow Resistance of High-Gradient Gravel Channels
Robert G. Millar (1994)
10.2514/3.11551
Normal Spectral Emittance of W-Re-HfC and W-Re-ThO2 Alloys
Bang-Hung Tsao (1992)
10.1088/0022-3727/10/1/014
Contact adhesion between solids in vacuum. I. Single-asperity experiments
Hubert M. Pollock (1977)
10.2514/3.60
Relative contact pressure - Dependence on surface roughness and Vickers microhardness
S. Song (1988)
10.1117/12.944551
High Resolution Phase Measuring Laser Interferometric Microscope For Engineering Surface Metrology
James F. Biegen (1988)
10.1080/05698197908982915
Calculation of Elastic Contact Stresses for Rough-Curved Surfaces
Tom R Thomas (1979)
10.1109/20.490149
Co-Zn ferrite rigid disks prepared by plasma-free sputtering at low substrate temperature
Nobuhiro Matsushita (1995)
10.1051/jp4:1994413
Modification of metals by high energy excimer laser
Tiina Sarnet (1994)
Ride Quality as a Part of Airport Pavement Management Systems
Tony G. Gerardi (1995)
How long is the coastline of Britain
Benoit B. Mandelbrot (1967)
10.1103/PhysRevB.42.6546
Wetting phenomena on rough substrates.
Li (1990)
10.1115/1.3184509
A Data Dependent Systems Approach to Dynamics of Surface Generation in Turning
Sudhakar M. Pandit (1981)
10.1080/07038992.1996.10874642
Mapping of Soil Moisture from C-Band Radar Images
Huaibin Geng (1996)
10.1243/PIME_PROC_1972_186_096_02
Waviness and Roughness in Hydrodynamic Lubrication
Kristian Tønder (1972)
10.1007/BF02319357
A measurement of three-dimensional strains around a creep-crack tip
K. Hatanaka (1992)
10.1103/PhysRevB.40.2450
Influence of rough surfaces on electrolytic conduction in porous media.
Schwartz (1989)
10.1063/1.116300
Losses in polycrystalline silicon waveguides
James S. Foresi (1996)
10.1016/0167-9317(93)90095-M
Analysis of microstructured samples by focused ion beam sample preparation
Lothar Frey (1993)
The classification of wear particle shape
Surapol Raadnui (1995)
10.1016/0924-0136(95)01857-3
Production of free standing objects by high velocity oxy-fuel (HVOF) thermal spraying process
Mm Helali (1996)
Scanning tunnel microscopy of friction surfaces
S. A. Chizhik (1991)
Testing methods for optimum selecting cleaning agent for mirror: Guangxue Jishu/Optical Technique
Ma (1992)
An in-process roughness measuring system for adaptive control of plunge grinding
Y. W. Zhao (1989)
Computer-assisted N/C programming of parts contours: SME Tech Pap Ser MS
Stevenson (1980)
Effects of precoating surface treatments on fatigue of Ti-6AI-4V: Journal of Applied Biomaterials v
Eberhardt (1995)
About the standardization and spectral measurement of surface waviness
J. Nara (1971)
Hen/Transactions of the Japan Society of Mechanical Engineers
C Ronbunshu (1993)
Overview of fabrication methods and fluid flow and heat transfer characteristics of micro channels: Advances in Engineering
Sunden (1995)
Report on the measurement of surface finish by stylus methods
Richard Edmund Reason (1944)
Analysis of the Metrological Possibilities of a Coherent Optical Method of Inspecting the Shape of Complex Surfaces: Sov.J.Opt.Technol
V. A. Kudryavtsev (1978)
polished, mirrorfinished surfaces: Precis.Eng
V. Radhakrishnan (1981)
ONERA threedimensional icing model: AIAA
T. Hedde (1995)
The statistical mechanism of chip formation in grinding process
J. Peklenik (1974)
10.1016/0043-1648(91)90097-E
A study on the limit criterion of full and partial lubrication
Yujin Fan (1991)
10.1147/rd.441.0279
Scanning tunneling microscopy
Gerd Karl Binnig (2000)
Effect of surface topography on the electrode-electrolyte interface impedance
E. T. McAdams (1989)
Small electrical discharge machining of TJ-6AI-4V alloy with rotating electrode
Yan (1993)
10.1016/0040-6090(92)90577-X
Precision metrology for studying thin films and surfaces
Jean Louise Mcpherson Bennett (1992)
Friction and wear of materials: John Wiley, New York, 244p
E. Rabinowicz (1965)
10.1149/1.1836644
Surface Characteristics of (100) Silicon Anisotropically Etched in Aqueous KOH
Quoc‐Bao Vu (1996)
10.5040/9781408185094.00000006
The effect of the
C. McGrath (1997)
Fractal Surfaces: New York
J. C. Russ (1994)
Capillary mechanism of friction and adhesion for rough surfaces: Trenie i Iznos v
S. A. Chizhik (1994)
Quality of metal surfaces: Am
J. Gaillard (1932)
10.1299/jsme1958.12.1537
On the Mechanism of Contact between Solid Surfaces : 3rd Report, The Number and the Distribution of Radii of Contact Points
Terumasa Hisakado (1969)
Surface modifications of nitrogen-plasmatreated stainless steels: Applied Surface Science, v
P. Groning (1993)
Characterisation of Surfaces by deconvolution of ultrasonic echoes using extended bandwidth: Appl.Phys
Cohen (1982)
Characterization of Surface
Rundsch. Beme (1978)
Elastic deformation and the laws
B. Lincoln (1953)
10.1016/0039-6028(96)00374-3
Characterization by scanning tunneling microscopy of the oxygen induced restructuring of Au(111)
Joël Chevrier (1996)
10.1016/0043-1648(93)90446-S
Relative performance of tool materials in ultrasonic machining
M. Komaraiah (1993)
10.1016/0950-0618(95)00008-4
Deterioration modelling for lateritic-base flexible pavements
Edward S. K. Fekpe (1995)
10.1080/01431169408954159
Texture measures for the identification and monitoring of urban derelict land
B. R. Dawson (1994)
Functional versus structural overlay of concrete pavements
Thomas D. White (1992)
10.1016/0141-6359(81)90075-1
An integrated digital system for three-dimensional surface scanning
Nirwan Idrus (1981)
10.1016/0043-1648(92)90283-E
Roughness as a process with a non-integer spectral exponent
Y. Takakura (1992)
10.1111/j.1365-3121.1995.tb00535.x
The Morphometric Synthesis for landmarks and edge- elements in images
Fred L. Bookstein (1995)
10.1016/0039-6028(94)00777-2
Direct evidence for Ge preferential growth at steps and out-of-phase boundaries of (7×7) domains on Si(111) in solid phase epitaxy
Yoshikazu Homma (1995)
EFFECT OF PAVEMENT DETERIORATION TYPES ON IRI AND REHABILITATION
Bashar H. Al-Omari (1995)
10.1557/PROC-354-699
Ion-Beam Polishing of Diamond Thin Films
Dong-Gu Lee (1994)
The measurement and characterization of surface topography
Ian Sherrington (1985)
10.1115/1.3452536
Externally Pressurized Compliant Air Bearing Operating on a Rough Moving Surface
H. Lau (1975)
A Topographic Study of Functional Surfaces
Robert Ohlsson (1996)
Chezy Formula Versus Theory and Common Sense
Witold G. Strupczewski (1994)
10.1016/0141-6359(87)90032-8
Basis for comparing the performance of surface-measuring machines
Mark E. Stedman (1987)
10.1016/0273-1223(96)00369-1
Assessment of sediment behaviour in a cunette-shaped sewer section
Michel Verbanck (1996)
10.1016/0304-8853(95)00887-X
Effect of annealing on the roughness and GMR of Fe/Cr multilayers
Harry W. Laidler (1996)
10.1016/0040-6090(92)90802-I
Surface modification of pure titanium and Ti6A14V by intensified plasma ion nitriding
T. M. Muraleedharan (1992)
Suggestions concerning the use of the correlogram for the interpretation of measurements of surface finish
J. R. Womersley (1945)
Optical measurement of surface roughness In manufacturing
R. Brodmann (1984)
Centre line filters for separating roughness from ripple and shape in surface measurement: Werkstatt
Fahl (1981)
Development of flow instabilities during the injection molding of multicomponent resins: Polymer Engineering and Science, v
S. Y. Hobbs (1996)
Heterodyne profiler moves R & D to the market place-: Laser Focus (Littlelon
R. A. Smythe (1987)
Scanning tunneling microscopy as a means for surface characterization
R. J. Behm (1987)
TiW adhesion to PMDAODA polyimide. Surface and interface chemistry
L. P. Buchwalter (1995)
Online measurement of arithmetical mean slope of Industrial surface using the laser scattered light cone method: V.6
L. Cao (1988)
Retired lecturer's presentation of the theory of friction first presented by Bowden and Tabor: Tribology
J. Hailing (1995)
Spectral-Density Function gives surface roughness
J. C. Stover (1976)
10.1016/0043-1648(88)90052-X
Determination of contact deformation in flat junctions by the random field method
Nikolai K. Myshkin (1988)
10.1016/0927-0248(95)00131-X
Growth of silicon thin layers on cast MGSi from metal solutions for solar cells
T. H. Wang (1996)
10.1016/0039-6028(94)00792-6
Dynamical theory of X-ray diffraction for the study of crystal surfaces
Toshio Takahashi (1995)
Adherence strength and smoothness of cathodically deposited paints on aluminum
F. Beck (1995)
Flow-Bed Interaction and Energy Loss in Torrents
Luís Ayala (1994)
10.1016/0022-0248(95)00441-6
Crystalline quality of Si epilayers influenced by Sb doping
Xuekun Lu (1996)
10.1115/1.2837075
Roughness Influence on Turbulent Flow Through Annular Seals Including Inertia Effects
Victor Lucas (1996)
10.1021/ma00118a035
Static and kinetic aspects of the ordering transition in thin films of diblock copolymers
Roger Mutter (1995)
10.1016/0039-6028(96)00675-9
Crossover scaling during submonolayer epitaxy onvicinal substrates
Gerald S. Bales (1996)
10.2320/jinstmet1952.60.3_324
Effect of Argon Ion Bombardment on Diffusion Bonding Joints of Cu or Ti
Osamu Ohashi (1996)
10.1115/1.3261349
Relating Profile Instrument Measurements to the Functional Performance of Rough Surfaces
Jon-Paul Mccool (1987)
10.1109/SOI.1995.526451
Surface mobility of SOI MOSFET's in the high temperature range: modelling and experiment
G. Reichert (1995)
10.1016/0030-3992(76)90023-2
The use of laser ligth in the study of metal surfaces
Lynn Tanner (1976)
10.1016/0079-6816(95)00062-3
Chemical etching of silicon: Smooth, rough, and glowing surfaces
L. A. Jones (1995)
10.1088/0953-8984/3/27/013
Electrical and mechanical contact between rough gold surfaces in air
André Tonck (1991)
10.1016/0169-4332(89)90001-9
Fractal-based characterization of surface texture
Stephen P. Chesters (1989)
10.1557/jmr.1994.0498
Interfacial stability and mechanical properties of Al2O3 fiber reinforced Ti matrix composites
H. Taichi Wang (1994)
10.1016/0039-6028(95)00025-9
Corrections to the van der Waals forces in application to atomic force microscopy
Michael Bordag (1995)
10.1016/0043-1648(80)90256-2
Investigation of the performance characteristics of cold-worked machined surfaces
M. L. Neema (1980)
10.1016/0039-6028(95)00963-9
Transition in the growth kinetics of vacancy islands on NbSe2
J. C. Arnault (1996)
10.1016/0043-1648(75)90272-0
Surface roughness changes during rolling
H. F. Atala (1975)
10.1109/TGRS.1987.289860
A Parameterization of the Effect of Surface Roughness on Microwave Emission
Tsan Mo (1987)
10.1016/0041-624X(95)00039-6
Optical detection of ultrasound on rough surfaces by a phase-conjugate method
Hayato Nakano (1995)
10.1016/0043-1648(94)90252-6
Friction behaviour of TiN, CrN and (TiAl)N coatings
Zhongping Huang (1994)
Developments in surface texture measurement
Philip J. Scott (1988)
10.1016/0043-1648(92)90193-C
A full numerical solution for the elastic contact of three-dimensional real rough surfaces
Yongqing Ju (1992)
10.1063/1.340089
Atomic force profiling by utilizing contact forces
R. Yang (1988)
10.1016/0043-1648(77)90131-4
A method of calculating steady state wear rate of metals from profilometric traces
Darrell Figgis (1977)
10.1007/BF02648529
Comparison of plasma-sprayed alumina coatings by RF and DC plasma spraying
Lorenzo Blanchi (1995)
Prediction of ice accretion, comparison between the 2D and 3D codes
D. Guffond (1994)
Effects of ion bombardment sputtering and atomic transport related roughening and smoothing on depth profiling resolution: Vacuum
G. Carter (1996)
10.1016/0956-716X(92)90409-8
Effect of surface finish on the corrosion behavior of commercial 7075 Al alloy
Tair I Wu (1992)
10.1016/0167-5729(93)90018-K
Far-infrared spectroscopy of phonons and plasmons in semiconductor superlattices
Thomas Dumelow (1993)
Infrared surface electromagnetic wave technique: Hongwai Jishu/lnfrared Technology v
Gu (1992)
The basis for an atlas of machining processes: Surface Topography
P. J. Sullivan (1989)
10.1016/c2009-0-22238-0
Random Field Models in Earth Sciences
George Christakos (1992)
10.1002/ls.3010080307
Definition of the transition from fluid lubrication to mixed lubrication for rough surfaces
Kang Liu (1996)
10.1061/(ASCE)0733-9399(1995)121:3(406)
Granular Flows: Steady Planar Chute Flow within Slightly Bumpy Walls
Gary C. Pasquarell (1995)
10.1016/0142-1123(95)98938-Y
Effect of electropolishing on the room-temperature low-cycle fatigue behaviour of AISl 304LN stainless steel
S. Ganesh Sundara Raman (1995)
10.1163/156856195X01094
Effects of the environment and curing on the strength of adhesive joints
Willy P. De Wilde (1995)
10.1088/0965-0393/3/4/006
Computation of equilibrium surface fluctuations in strained epitaxial films due to interface misfit dislocations
Fjola Jonsdottir (1995)
10.1016/1359-4311(95)00061-5
Adiabatic capillary tube expansion devices : A comparison of the homogeneous flow and the separated flow models
Teck Neng Wong (1996)
10.1016/0043-1648(73)90226-3
Effects of static loading on surface parameters
P. W. O'callaghan (1973)
10.1063/1.361406
In situ laser reflectance interferometry measurement of diamond film growth
C. D. Zuiker (1996)
10.1016/0141-6359(82)90002-2
Finite difference spectral moment estimation for profiles the effect of sample spacing and quantization error
John I. McCool (1982)
10.1016/0043-1648(79)90145-5
The measurement and data analysis used to evaluate highway roughness
James C. Wambold (1979)
10.1016/0043-1648(81)90074-0
A cell theory of rough surface lubrication
Gerard G. Elia (1981)
10.1016/0039-6028(95)00610-9
The early stages of MgO epitaxy on lattice-matched Cr0.7Mo0.3(001)
S. Chambers (1995)
10.1007/BF00352061
Ion-bombardment modification of surface morphology of solids
Zbigniew W. Kowalski (1994)
10.1163/156856196X00571
Surface force-induced bonding at metal multiasperity contacts
Jānis Maniks (1996)
10.1109/34.291448
A Physical Model-Based Analysis of Heterogeneous Environments Using Sonar-ENDURA Method
Ömür Bozma (1994)
10.1117/12.228105
Diamond films grown from fullerene precursors
Dieter M. Gruen (1995)
Experimental measurement of surface roughness on a submicron scale
A. Thomas (1986)
Atomistic structure of stepped surfaces: Surface Science, v
Farkas (1996)
10.1364/AO.34.001664
Polarization of the reflectivity of paints and other rough surfaces in the infrared.
Uri P. Oppenheim (1995)
Measuring pavement profile: Aberdeen's Concrete Construction
Koski (1994)
Omar, The effect of surface parameters on
M. M. Koura (1981)
Syh, Surface Topography and Integrity
S. Jahanmir (1977)
IEEE, Piscataway, NJ, p
Devices Meeting (1995)
The plastic contact of two rough surfaces
R. S. Sayles (1977)
The characterisation of changes in surface topography during running-in
T. R. Thomas (1978)
A new method of testing
B. C. Panda (1967)
On plane wave diffraction on uneven surface: Akusticheskii
I. A. Urusovskij (1992)
Rough surface and positioning of the surface: Bull. Japan
A. Iwaki (1966)
10.1016/0043-1648(70)90185-7
Estimation of the number and the mean area of real contact points on the basis of surface profiles
Yoshitsugu Kimura (1970)
Digital analysis of very small scale surface roughness
A Thomas (1988)
10.1117/12.198686
Design of a commercial optical instrument for surface roughness measurement
Shou-bin Liu (1995)
10.1119/1.2341418
Conduction of heat
Philip B. Allen (1983)
10.1016/0167-6105(92)90572-R
Computation of pressures on Texas Tech Building
Rajamanickam Panneer Selvam (1992)
Influence of Surface Topography on Contact Behaviour of Surfaces: J.lnst.Eng.(India) Mech.Eng.Div
R. A. Agarwal (1978)
Mise en compression par brassage de surfaces d'acier (surface prestressing of steel components by brushing)
J. Perrais (1993)
Some approaches to measurement of waviness
R. E. Reason (1965)
Statistical method for determining temperature fields in rubbing bodies.1
T. V. Korochkina (1988)
Resistance to overland
A-F Abrahams (1993)
10.1006/jsvi.1993.1270
The effects of surface irregularities on roller bearing vibrations
Y.-T. Su (1993)
Measurement of correlation length on a ground surface: Microtecnic
T. R. Thomas (1973)
10.1016/0304-8853(95)00844-6
Giant nonlinear Kerr effects
M. Groot Koerkamp (1996)
Production processing - mechanical property links via mesostructures: Tensioning the fibres in pultrusions
Michael R. Piggott (1996)
10.1002/mop.4650080216
Scattering from a periodic inhomogeneous medium with a rough interface
Angelo Freni (1995)
10.1557/JMR.1993.1742
High refractive index films of polymer nanocomposites
Lorenz Zimmennann (1993)
10.1115/1.2921657
The Normal Approach and Stick-Slip Phenomena at the Interface of Two Rough Bodies
BarryK. Lance (1993)
10.1117/12.959623
Interpretation Of High-Resolution X-Ray Scattering Measurements
Eugene L. Church (1981)
10.1080/10402009608983547
A Numerical Model for the Dry Sliding Contact of Layered Elastic Bodies with Rough Surfaces
K. L. Mao (1996)
10.1016/0378-5963(79)90042-4
Optical examination and monitoring of surfaces
W. Neal (1979)
10.1002/bit.260440510
Liquid flow in heterogeneous biofilms.
Dalene de Beer (1994)
10.1016/0039-6028(95)00477-7
Quantum effects on the step interaction energy and the equilibrium shape of crystals
Nicolás García (1995)
10.1016/0043-1648(93)90052-N
Description of the rolling friction process by acoustic modelling
D. G. Evseev (1993)
10.3133/ofr97745e
Map showing principal debris-flow source areas in the San Francisco Bay region, California
Stephen D. Ellen (1997)
10.1088/0950-7671/31/9/304
A reflectometer for the assessment of surface texture
John Halling (1954)
10.1016/0141-6359(79)90140-5
A precise pneumatic co-axial jet gauging system for surface roughness measurements
Aly Anis Hamouda (1979)
10.1115/1.3251430
Some Factors Influencing the Contact Behavior of Surfaces
Kenji Nuri (1980)
10.1209/0295-5075/2/7/007
Healing of a Rough Surface at Low Temperature
J. Villain (1986)
10.1117/12.234214
Investigation of surface topography after melting by laser beam
Vadim Avanesov (1996)
10.1520/JTE11767J
Novel Stage for Ultrasonic Measurement of Real Contact Area Between Rough and Flat Parts Under Quasi-Static Load
A. Polijaniuk (1993)
10.1115/93-GT-074
External Heat Transfer Enhancement to Turbine Blading due to Surface Roughness
Fathi Dr. Tarada (1993)
10.1088/0026-1394/14/1/007
Uncertainties in Calibrating a Stylus Type Surface Texture Measuring Instrument with an Interferometrically Measured Step
E. Clayton Teague (1978)
10.1111/j.1365-2818.1983.tb04196.x
Topographic quantification of non-planar localized surfaces
K. L. Wright (1983)
10.1080/10402009408983308
Theory of Life Prediction of a Viscoelastic Lubricating Surface Film
Wen-Ruey Chang (1994)
10.1016/0043-1648(94)90185-6
The effect of sliding velocity on the friction and wear of UHMWPE for use in total artificial joints
John Fisher (1994)
10.1006/jcis.1994.1242
Interactions of Silica Surfaces
G. Llorente Vigil (1994)
10.1016/1350-4533(94)90041-8
A tribological study of a series of retrieved accord knee explants.
James L. Hailey (1994)
10.1103/PhysRevB.40.3358
Computer simulation for the roughness and fractal properties of film surfaces.
Nakamura (1989)
10.1063/1.1762435
Effect of Surface Roughness on the Velocity Defect Law
Yoshimasa Furuya (1967)
10.1016/0043-1648(81)90309-4
Topographical features observed in a scanning electron microscopy study of aluminium alloy surfaces in sliding wear
J. Clarke (1981)
10.1007/BF00868781
Determining microtopographic roughness parameters from sections
Ya. A. Rudzit (1985)
Investigation Into the assessment of surface finish by microwave reflection: Precision Engineering, V.8
Surayanarayana (1986)
10.1016/0141-6359(81)90008-8
Anisotropic Etching microtechnology
D. M. Allen (1981)
Thermal contact conductance under low applied load in a vacuum environment: Experimental Thermal and Fluid Science v
Nishino (1995)
Characterization of 3D surface topography
J. Rudzitis (1996)
10.2493/jjspe1933.29.35
Measurement of Large Gears
Jiro Ishikawa (1963)
10.1016/S0022-3093(05)80498-3
Fractal analysis on fracture surfaces of glass using replication techniques
J. J. Jr Mecholsky (1992)
10.1016/0167-6105(94)00055-I
Wind loads on low rise buildings — A review
Prem Krishna (1995)
10.1115/1.3261705
On the Nature of O-Rings in Contact With Rough Surfaces
William E. Warren (1988)
10.1002/srin.199501098
Characterisation of technical surfaces by measns of fractal geometry
Eckart Prof.Dr.-Ing. Doege (1995)
10.1016/0304-8853(93)90182-2
Polymer adsorption on a magnetic particle in a dispersion system
Hitoshi Inoue (1993)
10.1109/34.192463
A Theory for Multiresolution Signal Decomposition: The Wavelet Representation
Stéphane Mallat (1989)
10.1016/0043-1648(78)90160-6
Metal transfer in the frictional contact of a rough hard surface
Tohru Sakamoto (1978)
Dynamic Loading of a Rigid Frame Bridge
Dongzhou Huang (1994)
10.1007/BF01121731
Accuracy of surface roughness parameter determinations
Ya. A. Rudzit (1975)
10.1016/0307-904X(95)00155-D
Response of turbulent flow to abrupt changes in surface roughness and its relevance in horizontal annular flow
Sreenivas Jayanti (1996)
10.1007/BF00727895
Fractal structure of the pore surface of hydrated portland cement pastes
Victor M. Castaño (1990)
10.1016/0039-6028(87)90166-X
Spectrum analysis of surface roughness signals obtained with the scanning tunneling microscope
Joyce Merrill Valdes (1987)
10.1021/la00032a039
Atomic force microscopy of ordered monolayer films from discotic liquid crystals
Vladimir V Tsukruk (1993)
Cracking and roughening of coated paper surfaces
Johan Groen (1996)
10.1016/S0007-8506(07)61364-X
Local Irregularities of the Surface and their Influence on Surface Roughness Parameters
V. S. Loukyanov (1980)
10.1115/1.2920580
A Comparison of the Fluid Models Effect on the Internal Stresses of Rough Surfaces
Farshid Sadeghi (1991)
10.1016/0043-1648(80)90162-3
Contact of rough surfaces: A review of experimental work
K. L. Woo (1980)
10.1520/GTJ11004J
Pile skin friction in sands from constant normal stiffness tests
J. T. Tabucanon (1995)
10.1016/0304-8853(95)00701-6
Pulse noise in thin film disk recording systems
Frank Obernosterer (1996)
10.1109/19.377779
Metrology: quo vadis?
Dieter Kind (1995)
10.1016/0030-4018(95)00646-X
Correlation properties of speckles produced by diffractal-illuminated diffusers
Katsuhiro Uno (1996)
Status of surface modification for minimizing dirt retention. Organized monomolecular assemblies: Critical Reviews in Surface Chemistry
Speaker (1993)
A study on drop condensation in solar greenhouses: Geliotekhnika no. 2 Mar-Apr
V. D. Kim (1993)
The theory of integral characteristics of spatial flow as applied to calculate dynamic coefficients of gas bearings
N. M. Gorbachev (1994)
Structural studies of TiO//2(110) using scanning tunneling microscopy
Szabo (1995)
Relation of surface roughness readings to actual surface profile
L. P. Tarasov (1945)
Assessment of surface finish by means of surface roughness scale: Machy
M. P. Rubert (1961)
Some features of the diamond grinding of magnetically hard alloys: Sverkhtverdye Materialy no. 1 Jan-Feb
V Lavrinenko (1993)
Bill, Abrasive texturing and burnishing process monitoring using acoustic emission
Dornfeld (1993)
YBa//2Cu//3O//7 thin films on nanocrystalline diamond films for HTSC bolometer
G. Cui (1993)
Influence of stochastic contact layer on certainty of ultrasonic testing
V. G. Shcherbinskij (1995)
Modern erosion-corrosion roughened surfaces: The measurement techniques in surface Canadian Journal of Chemical Engineering, metrology
J. Postlethwaite (1988)
Need for additional abutment scour research: International Water Resources
B. W. Melville (1995)
Determining optimal parameter 87
Millick (1998)
measurement of surface roughness in SEM images: Particle Characterization
S. Gauthier (1987)
10.1016/0043-1648(94)90270-4
Experimental investigation of overall machining performance with overall progressive tool wear at different tool faces
Xiang Dong Fang (1994)
Structure and phases
L. Seehofer (1998)
Bed roughened stilling basins: Proceedings of the Institution of Civil Engineers, Water Maritime and Energy v
H. S. Mohamed (1994)
An evaluation of machined surfaces topography.(1st report, on slope distribution of projections)
T. Tsukado (1974)
Some applications of the plastic replica process to surface finish measurement: Machinery
C. 1953. Timms (1948)
10.1016/0043-1648(95)06726-4
The tribological and dynamic behavior of alternative magnetic tape substrates
Brian L. Weick (1995)
10.1243/PIME_PROC_1986_200_091_02
The Tribology of Surface Coatings, Particularly Ceramics
John Halling (1986)
Surface analysis of T1-6A1-4V adhesive bonding system: Surface Interface
H. M. Clearfield (1988)
10.1080/05698197208981404
A Model for Asperity Load Sharing in Lubricated Contacts
Robert Anchor. Thompson (1972)
10.7210/jrsj.8.5_541
Estimation and Control of the Attitude of a Dynamic Mobile Robot Using Internal Sensors
Osamu Matsumoto (1990)
10.1063/1.1137048
Apparatus for highresolution vibrational electron energyloss spectroscopy of solid surfaces
Mitsuaki Nishijima (1982)
10.1016/0376-7388(93)85130-O
Enhanced performance for pressure-driven membrane processes: the argument for fluid instabilities☆
H. B. Winzeler (1993)
10.9753/icce.v23.%p
WAVE RUNUP AND OVERTOPPING ON COASTAL STRUCTURES
J. P. de Waal (1993)
10.1117/12.210606
Strong rough-surface wave reflection
Alexander N. Teokharov (1995)
10.1007/BF00712664
Estimates of effective surface roughness over complex terrain
Phillip Hignett (1994)
10.1088/0031-8949/53/6/017
Surface scattering near grazing angles: the distorted wave Born approximation for rough surfaces
Gosta Ljungdahl (1996)
10.1017/S0022112096001991
Nearly pure sorting waves and formation of bedload sheets
Giovanni Seminara (1996)
Depth of rain water on road surfaces
Jared Arnold Anderson (1995)
10.7567/JJAPS.25S1.58
Attenuation of the Surface Acoustic Soliton by Surface Roughness
Tetsuro Sakuma (1986)
10.1016/0038-1101(94)90398-0
Perpendicular transport through rough interfaces in the metallic regime
Arne Brataas (1994)
10.1016/0924-0136(95)01818-2
Grinding of aspherical SiC mirrors
Zhaowei Zhong (1996)
Measurement of Surface Roughness with a Laser Beam
Gci Lin (1977)
10.1149/1.1836940
Cl2‐Based Dry Etching of GaAs, AlGaaAs, and GaP
Jewon Lee (1996)
10.1016/0890-6955(94)90001-9
The influence of abrasive waterjet cutting conditions on the surface quality of graphite/epoxy laminates
M. Ramulu (1994)
Absorption of acoustic waves in single crystals of langasite
G. D. Mansfel’d (1995)
10.1007/BF00592704
On the efficiency of interleaves in carbon fibre/epoxy composite laminates by the fractal approach
Qiu-li Yuan (1996)
10.1061/(ASCE)0733-9437(1994)120:2(292)
Correct form of Hall technique for border irrigation advance
Abdulrahman Ali Alazba (1994)
10.1016/0039-6028(94)00739-X
Initial stage of aluminum thin film growth on Si(100) surfaces as observed by scanning tunneling microscopy
Changxin Zhu (1995)
10.1016/0272-8842(92)90086-S
Fracture strength, surface roughness and corrosion of ceramics
W. Jeffrey Tomlinson (1992)
10.1007/bf00192231
Effect of surface roughness on a turbulent wall-attaching offset jet
Seong Hoon Yoon (1994)
10.1116/1.1316537
The Interface-Contact Vacuum Sealing Processes
Ann Roth (1972)
Low-damage and smooth
Uenishi (1995)
Effect of workpiece
A Sugawara (1982)
10.1007/BF00883130
Effect of surface roughness on the stress-strain state of rubbing bodies
Evgenii Kuznetsov (1982)
INFLUENCE OF SURFACE TEXTURE ON COLOR TRANSITION OF MORTAR
Makoto Ichitsubo (1996)
Thermoelastic instability of friction contact of stamps with the halfspace
V. A. Morov (1985)
Some aspects of the character
A. D. Lamb (1987)
by grazing angle neutron reflectometry: Optics Communications v
N. 1993. Magnea (1993)
10.1111/j.2042-7158.1978.tb13361.x
The effect of some formulation and process variables on the surface roughness of film-coated tablets.
Raymond C. Rowe (1978)
Cavese: Surface roughness evolution on glow discharge aSi.H
R. W. Collins (1987)
Study of surface-roughness profiles of fatigued metals by scanning electron microscopy
Wang (1982)
Efficiency of stilling basins: Hydraulics Working with the Environment National Conference Publication - Institution of Engineers, Australia
AN H.S. Mohamed (1994)
Enhanced surface texture model for end milling: Engineered Surfaces American Society of Mechanical Engineers, Production Engineering Division
S. N. Melkote (1992)
Floatpolishing process and analysis of floatpolished quartz
S. F. Scares (1994)
On physical sputtering of W(Cu) composite as a divertor material for fusion reactor
L. I. Ivanov (1994)
Guide to estimating the friction of rubber: Rubber Chemistry and Technology v
A. D. Roberts (1992)
Method for recording roughness
J. W. 1953. Sawyer (1953)
10.1016/0043-1648(93)90095-4
Development of fracture resistant, multilayer films for precision ball bearings
George B. Hopple (1993)
10.1557/JMR.1991.1685
The surface topography of non-shear treated pitch and PAN carbon fibers as viewed by the STM
Wesley P. Hoffman (1991)
10.1115/1.2910065
Turbulent Flow Near a Rough Wall
Yang-Moon Koh (1992)
10.1016/0890-6955(96)00082-X
Surface roughness monitoring using computer vision
Manbir S. Sodhi (1996)
10.1109/CPEM.1988.671326
Measurement of Nanometer Topography by Scanning Tunneling Microscope
Yohei Kobayashi (1988)
10.1063/1.360981
X-RAY SCATTERING AND ABSORPTION STUDIES OF MNAS/GAAS HETEROSTRUCTURES
Shuiping Huang (1996)
10.1016/0043-1648(74)90174-4
Groove wear, built-up edge and surface roughness in turning
M. S. Selvam (1974)
10.1016/1350-4495(95)00081-X
The common character of the phenomena accompanying SERS and the infrared absorption enhancement
Aleksey Mickhailovich Polubotko (1996)
Measurement and effects of surface defects and quality of polish : January 21-22, 1985, Los Angeles, California
L. R. Baker (1985)
10.1016/0030-4018(91)90356-I
Reply to a Comment on “Wave scattering from non-random fractal surfaces”
Xiaoguang Sun (1991)
Current Velocity Profiles in the Presence of Waves
Zj You (1993)
A survey of surface quality
E W.R. (1930)
The relationship of surface finish to physical and functional behaviour: Proc. of the Int.Prod.Eng.Res.Conf., Pitttsburgh
R. Courtel (1963)
Surface finish - what surface
L. H. Milligan (1943)
Twodimensional model of hard-body surface asperities
V. P. Tikhomirov (1986)
10.1061/(ASCE)0733-9445(1994)120:7(1977)
MECHANICAL BEHAVIOR OF METAL CONTACT JOINT
Shigeru Kuranishi (1994)
10.1109/20.376392
The statistical roughness and magnetic surface anisotropy
Jing Yang (1995)
Solodukhov, Reflectometric method of roughnesss measurement for polished metal surfaces: Measurement Techniques, V.27
K. A. Obradovich (1984)
Model for hydro and hydro-abrasive jet machining of carbon fiber reinforced plastic composites
R. Groppetti (1993)
Measurement of smooth surface finishes: Industrial Quality Control, p
H. E. Bennett (1964)
Statistical model of contact fatigue of rough bodies
Kudish (1991)
Rotary shaft seals.Some effects of shaft surface finish: Br
E. T. Jagger (1961)
Polarization theory for the scattering of sound at imperfect interfaces: Journal of Nondestructive Evaluation v
Wickham (1992)
Non-Contact Method: Appl.Opt
D. C. Sun (1978)
10.1016/0042-207X(88)90447-2
The role of layer growth on interface roughness in Ni-C multilayer X-ray mirrors
E. J. Puik (1988)
Preparation of aluminium oxide abrasive powders with isometric grit shape: Sverkhtverdye Materialy no
S. M. Uman (1992)
10.1524/teme.1980.47.jg.21
Auswirkungen der Tastspitzengeometrie auf die industrielle Rauheitsmessung / Influences of the stylus tip geometry on industrial roughness measuring
H. Bodschwinna (1980)
Surface integrity of honed cylinders
G. Balasubramanian (1978)
W.R.D. (Ed.), Engineered Surfaces: Engineered Surfaces American Society of Mechanical Engineers, Production Engineering Division
Ehmann (1992)
Efficient mechanochemical polishing for silicon nitride ceramics: NIST
T. Uematsu (1993)
Reconstruction of the Pt//5//ONi//5//0(100) surface, a LEED and STM study: Surface Science v
Y. Gauthier (1995)
Surface measurement, more than meets the eye, Abrasives Apr-May
Famum (1995)
The achievement of minimum leakage from elastomeric seals
R. C. Chivers (1978)
Polarization investigations of sea surface microwave thermal radiation fluctuations
Bubukin (1995)
The accuracy of surface roughness assessment: Microtecnic
P. F. Jones (1962)
Forecasting of start moment for sliding bearings with solid lubricating coatings
O. V. Sutyagin (1992)
Scanning electron microscope and the computer - new tools for surface metrology
H. T. McAdams (1974)
Rasigni, Study of surface roughness for thin film of CaF deposited on glass substrate
G. Rasigni (1983)
Interactive surface modelling and representation of surface roughness & topography
Bengt-Göran Rosén (1991)
10.1007/978-94-011-2811-7_3
Contact of Rough Surfaces
J. A. Greenwood (1992)
10.1098/rsta.1978.0084
Discrete properties of random surfaces
David J. Whitehouse (1978)
10.1149/1.2050100
Monitoring and Optimization of Silicon Surface Quality
Hichem M'saad (1995)
10.5006/1.3293622
Effects of surface chromium depletion on localized corrosion of alloy 825 as a high-level nuclear waste container material
Darrell S. Dunn (1995)
10.1109/OCEANS.1995.526908
Effects of target-boundary acoustic coupling in shallow water scattering
Garner C. Bishop (1995)
10.1038/273573a0
Topography of random surfaces
M. V. Berry (1978)
10.1177/002199839502900501
Slip and Frictional Shear Stresses in Ceramic Matrix Composites
P.W.M. Peters (1995)
10.1007/BF00566411
Investigation of ultrasonic wave scattering by a randomly rough solid-solid interface
Claudio Vinicio Pecorari (1992)
10.1109/FUZZY.1992.258777
A fuzzy knowledge-based system for predicting surface roughness in finish turning
Jian Fei (1992)
10.1016/0029-8018(95)00029-1
Movable bed roughness and current profiles in the presence of irregular waves with an arbitrary angle to currents
Zai-Jin You (1995)
10.1243/PIME_PROC_1967_182_041_02
Use of the Least Squares Line and Plane in the Measurement of Straightness and Flatness
Anthony James Thomas Scarr (1967)
10.1016/0042-207X(94)90312-3
MACHINING INFLUENCE ON THE SURFACE OF SOME ROUGHNESS SAMPLES
Liviu Popa-Simil (1994)
10.1016/0039-6028(95)01253-2
Curvature forces at crystal surfaces
Bernard Salanon (1996)
10.1016/0020-7357(65)90006-5
The effect of surface topography upon the static stiffness of machine tools joints
R. H. Thornley (1965)
10.1557/PROC-295-65
Growth and Surface Morphology of Thin Silicon Films Using an Atomic Force Microscope
Rama I. Hegde (1992)
10.1002/sia.740200515
Porcelain bonding on Ti: Its dependence on surface roughness, firing time and vacuum level
J. A. Hautaniemi (1993)
10.1016/0039-6028(94)91562-8
Optical in situ characterization of deposit formation under alternate supply of diethylzinc and CO2 at room temperature
A. Rosental (1994)
10.1016/0026-0800(78)90045-9
Profilometric analysis of fractures
S. M. El-Soudani (1978)
10.1016/0304-3991(92)90457-U
Problems of roughness measurements using STM
Renate Hiesgen (1992)
10.1115/1.2920968
Sectional Micro-Elastohydrodynamic Lubrication
Pinwei Huang (1993)
10.4271/930809
Frictional Behavior of Electrogalvanized Sheet Steels
Thomas Hylton (1993)
10.1016/S0922-3487(08)70165-5
Chapter 15 The Use of Fractal Dimension to Characterize Individual Airborne Particles
Philip K. Hopke (1990)
10.1016/0008-6223(94)00181-X
Surface energy and mechanical properties of plasma-modified carbon fibers
Nursel Dilsiz (1995)
10.1364/JOSA.51.000123
Relation Between Surface Roughness and Specular Reflectance at Normal Incidence
Harold Earl Bennett (1961)
10.1117/12.225297
Optical surfacing of one-meter-class reaction bonded silicon carbide
Robert S. Breidenthal (1995)
10.1557/PROC-283-173
High Spatial Resolution Mapping of Porous Silicon
Emile Ettedgui (1992)
Roughness Coefficients for High-Gradient Channels in New York State
William F. Coon (1994)
10.1117/12.130638
Diffuse neutron scattering signatures of rough films
R Pynn (1992)
10.1007/BF00677302
Self-lubricating and self-strengthening molds
Anatoly Kulikov (1992)
10.1016/0021-8502(96)00002-X
Dry deposition and interception of 4–22 μm diameter particles to a lettuce crop
J. D. Watterson (1996)
10.1113/expphysiol.1962.sp001569
THE FUNCTIONAL BEHAVIOUR OF THE MICROCIRCULATION
Howard Walter Florey (1962)
10.1143/JJAP.34.316
Laser Dew-Point Hygrometer
Shigeaki Matsumoto (1995)
Bar code labels in harsh environments
McDonald (1996)</