Online citations, reference lists, and bibliographies.

Toughness Enhancement In Hard Single-Crystal Transition-Metal Nitrides:

Hanna Kindlund
Published 2014 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
Transition-metal nitrides are known for their high hardness, good wear resistance, high-temperature stability, and chemical inertness. Because of these properties, they are extensively used in many ...
This paper references
10.1016/J.TSF.2004.04.007
Magnetron-sputtered nc-TiC/a-C(Al) tough nanocomposite coatings
Sam Zhang (2004)
10.1016/J.TSF.2007.06.104
Experimental studies on epitaxially grown TiN and VN films
K. Kutschej (2007)
10.1103/PHYSREVB.79.024106
Ab initio examination of ductility features of fcc metals
Sami Kamran (2009)
10.21236/ada196638
Solids and Surfaces: A Chemist's View of Bonding in Extended Structures
R. Hoffman (1989)
10.1016/S0040-6090(00)01041-5
Structural properties and nitrogen-loss characteristics in sputtered tungsten nitride films
Y. Shen (2000)
10.1002/9781118162897
X-ray Photoelectron Spectroscopy: An introduction to Principles and Practices
P. V. D. Heide (2011)
10.1016/S0257-8972(02)00903-9
Recent advances of superhard nanocomposite coatings: a review
Sam Zhang (2003)
10.1063/1.339770
Growth of single‐crystal TiN/VN strained‐layer superlattices with extremely high mechanical hardness
U. Helmersson (1987)
N-W Phase Diagram
W Huang (1997)
10.1103/PhysRevB.27.2005
Theory of bonding of transition metals to nontransition metals
C. D. Gelatt (1983)
10.1007/978-94-011-1765-4
Mechanical properties and deformation behavior of materials having ultra-fine microstructures
M. Nastasi (1993)
10.1016/J.TSF.2004.10.053
Different approaches to superhard coatings and nanocomposites
S. Vepřek (2005)
10.1016/J.TSF.2004.11.165
Towards high adherent and tough a-C coatings
Sam Zhang (2005)
SIMNRA, a Simulation Program for the Analysis of NRA, RBS and ERDA
J. Duggan (2005)
10.1557/JMR.1992.0901
Growth, structure, and microhardness of epitaxial TiN/NbN superlattices
M. Shinn (1992)
10.1016/J.WEAR.2005.09.003
Evaporated vanadium nitride as a friction material in dry sliding against stainless steel
U. Wiklund (2006)
10.1116/1.4867610
Effect of WN content on toughness enhancement in V1–xWxN/MgO(001) thin films
Hanna Kindlund (2014)
10.1016/S0257-8972(99)00586-1
Hard and superhard nanocomposite coatings
J. Musil (2000)
10.1063/1.1510558
Development of preferred orientation in polycrystalline NaCl-structure δ-TaN layers grown by reactive magnetron sputtering: Role of low-energy ion surface interactions
C.-S. Shin (2002)
10.1103/PhysRevB.28.3214
Vacancy effects in the x-ray photoelectron spectra of Ti N x
L. Porte (1983)
10.1080/14786440808520496
XCII. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals
S. F. Pugh (1954)
10.1116/1.573700
Material selection for hard coatings
H. Holleck (1986)
10.1021/cm00018a034
Chemical vapor deposition of titanium, zirconium, and hafnium nitride thin films
R. Fix (1991)
10.1103/PHYSREVB.76.174110
Electronic signatures of ductility and brittleness
T. Dasgupta (2007)
10.1557/PROC-194-45
Ductile Phase Toughening of Brittle Intermetallics
D. Anton (1990)
10.1063/1.1568521
Vacancy hardening in single-crystal TiNx(001) layers
C.-S. Shin (2003)
10.1016/0022-0248(94)90757-9
Characterization of misfit dislocations in epitaxial (001)-oriented TiN, NbN, VN, and (Ti,Nb) N film heterostructures by transmission electron microscopy
L. Hultman (1994)
10.1088/0953-8984/2/42/007
Nitrogen vacancy and chemical bonding in substoichiometric vanadium nitride
L. Skála (1990)
10.1016/0001-6160(88)90149-6
On the toughness of brittle materials reinforced with a ductile phase
L. Sigl (1988)
10.1016/S0043-1648(00)00488-9
On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour
A. Leyland (2000)
Veprek-Heijman MG: Concept for the design of superhard nanocomposites with high thermal stability: their preparation, properties, and industrial applications. In Nanostructured Coatings
S Veprek (2006)
10.1016/J.SURFCOAT.2005.08.097
Materials informatics for the design of novel coatings
L. Zhao (2005)
10.1103/PhysRevB.75.155437
Interface structure in superhard TiN-SiN nanolaminates and nanocomposites : film growth experiments and ab initio calculations
L. Hultman (2007)
Transmission Electron Microscopy: A Textbook for Materials Science
D. B. Williams (1996)
10.1016/J.ACTAMAT.2014.06.025
Vacancy-induced toughening in hard single-crystal V0.5Mo0.5Nx/MgO(0 0 1) thin films
Hanna Kindlund (2014)
10.1063/1.104189
ENHANCED HARDNESS IN LATTICE-MATCHED SINGLE-CRYSTAL TIN/V0.6NB0.4N SUPERLATTICES
P. Mirkarimi (1990)
10.1016/S0257-8972(98)00560-X
Improving the properties of titanium nitride by incorporation of silicon
M. Diserens (1998)
10.1063/1.4822440
Toughness enhancement in hard ceramic thin films by alloy design
Hanna Kindlund (2013)
10.1088/0022-3727/26/4A/039
Determination of strain in epitaxial semiconductor layers by high-resolution X-ray diffraction
P. Sluis (1993)
10.1002/PPAP.200600179
Hard yet Tough Nanocomposite Coatings – Present Status and Future Trends
Sam Zhang (2007)
10.1116/1.1525818
Epitaxial Ti1-xWxN alloys grown on MgO(001) by ultrahigh vacuum reactive magnetron sputtering: Electronic properties and long-range cation ordering
F. Tian (2003)
10.1557/JMR.1992.1564
An improved technique for determining hardness and elastic-modulus using load and displacement sensi
W. Oliver (1992)
Mo-N Phase Diagram
PR Subramanian (1990)
10.1006/jssc.1994.1135
Chemical Bonding in Stoichiometric and Substoichiometric Vanadium Nitride
Ľ. Benco (1994)
10.1557/PROC-356-663
Cracking During Nanoindentation and its Use in the Measurement of Fracture Toughness
D. Harding (1994)
10.1557/JMR.2005.0220
In situ Tensile Testing of Nanoscale Freestanding Thin Films Inside a Transmission Electron Microscope
M. A. Haque (2005)
10.1103/PhysRev.89.832
The Thermal Expansion of Solids
J. Dugdale (1953)
10.1016/J.SURFCOAT.2004.10.020
Toughening of hard nanostructural thin films: a critical review
Sam Zhang (2005)
10.4236/JMP.2012.38104
Thermal Expansion of Solids
Z. Pluta (2012)
10.1016/S0040-6090(97)00788-8
Measurement of fracture toughness of ultra-thin amorphous carbon films
X. Li (1998)
Introduction to Nanocomposite Materials: Properties, Processing, Characterization
TE Twardowski (2007)
10.1016/S0040-6090(96)09524-7
Ion-Assisted Growth of Ti1-Xalxn/Ti1-Ynbyn Multilayers by Combined Cathodic-Arc/Magnetron-Sputter Deposition
I. Petrov (1997)
10.1109/JMEMS.2004.839013
A new methodology to investigate fracture toughness of freestanding MEMS and advanced materials in thin film form
H. Espinosa (2005)
10.1016/S0257-8972(99)00482-X
ZrN/Cu nanocomposite film—a novel superhard material
J. Musil (1999)
10.1116/1.578610
Comparison of TiAlN coatings grown by unbalanced magnetron and arc bond sputtering techniques
W.-D. Münz (1993)
10.1179/mst.1992.8.4.345
Theoretical predictions of structure and related properties of intermetallics
D. G. Pettifor (1992)
10.1016/B0-12-227410-5/00351-3
Ion beams for materials analysis
D. Cohen (1988)
10.1016/0956-7151(92)90157-A
Ductile phase toughening mechanisms in a TiAlTiNb laminate composite
G. Odette (1992)
10.1063/1.1884743
Phase stability tuning in the NbxZr1−xN thin-film system for large stacking fault density and enhanced mechanical strength
T. Joelsson (2005)
10.1021/cm00029a007
Chemical vapor deposition of vanadium, niobium, and tantalum nitride thin films
R. Fix (1993)
Scanning microscopy for nanotechnology : techniques and applications
W. Zhou (2010)
10.1116/1.4807654
Epitaxial V0.6W0.4N/MgO(001): Evidence for ordering on the cation sublattice
Hanna Kindlund (2013)
10.1116/11.20130301
Sputter-cleaned Epitaxial VxMo ( 1x ) Ny / MgO ( 001 ) Thin Films Analyzed by X-ray Photoelectron Spectroscopy : 2 . Single-crystal V 0 . 47 Mo 0 . 53 N 0 . 92
Grzegorz Greczynskia (2013)
10.1016/S0140-6736(05)61503-6
T
D. Davies (1998)
10.1126/SCIENCE.1060512
Restricting Dislocation Movement in Transition Metal Carbides by Phase Stability Tuning
H. Hugosson (2001)
10.1116/1.573713
Titanium aluminum nitride films: A new alternative to TiN coatings
Wolf‐Dieter Münz (1986)
10.1007/BF02868075
Nb−V Phase diagram
J. F. Downie Smith (1983)
10.1016/J.TSF.2008.03.005
Plane stress fracture toughness of freestanding nanoscale thin films
H. Hosokawa (2008)
10.1007/978-94-009-1565-7
The Chemistry of Transition Metal Carbides and Nitrides
S. Oyama (1996)
Thin Film Analysis by X-Ray Scattering
M. Birkholz (2005)
10.1016/J.SURFCOAT.2004.04.056
Mechanical properties and machining performance of Ti1−xAlxN-coated cutting tools
A. Hörling (2005)
10.1007/978-0-387-48756-4_9
Concept for the Design of Superhard Nanocomposites with High Thermal Stability: Their Preparation, Properties, and Industrial Applications
S. Vepřek (2006)
10.1116/11.20130602
Sputter-cleaned Epitaxial VxMo(1-x)Ny/MgO(001) Thin Films Analyzed by X-ray Photoelectron Spectroscopy: 3. Polycrystalline V0.49Mo0.51N1.02
Grzegorz Greczynski (2013)
Ettmayer P: Lattice parameters and thermal expansion of δ-VN1-x from 298-1000
W Lengauer (1986)
Mo-V Phase Diagram 1963
JJ English (2006)
10.1557/JMR.1997.0286
Characterization of the Induced Plastic Zone in a Single Crystal TiN(001) Film by Nanoindentation and Transmission Electron Microscopy
M. Odén (1997)
10.1063/1.3061720
Introduction to solid state physics
C. Kittel (1953)
10.1016/J.SURFCOAT.2010.06.023
Mechanical and tribological properties of TiN/Ti multilayer coating
Yan Hai Cheng (2010)
10.1038/20148
Electronic mechanism of hardness enhancement in transition-metal carbonitrides
S. Jhi (1999)
10.1016/J.TSF.2011.09.036
Toughness evaluation of hard coatings and thin films
Sam Zhang (2012)
10.1016/S0043-1648(00)00505-6
Design and evaluation of tribological coatings
S. Hogmark (2000)
10.1116/1.574948
Industrial deposition of binary, ternary, and quaternary nitrides of titanium, zirconium, and aluminum
O. Knotek (1987)
10.1116/1.573651
Reactively sputtered nitrides and carbides of titanium, zirconium, and hafnium
W. Sproul (1986)
10.1007/978-94-011-1765-4_29
Measurement of Fracture Toughness in Thin Films and Small Volumes Using Nanoindentation Methods
G. Pharr (1993)
10.1016/0040-6090(96)08663-4
Oxidation of TiN, ZrN, TiZrN, CrN, TiCrN and TiN/CrN multilayer hard coatings reactively sputtered at low temperature
P. Panjan (1996)
10.1063/1.1662193
Superconducting properties, electrical resistivities, and structure of NbN thin films
Y. M. Shy (1973)
Electronic mechanism for toughness enhancement in Ti x M 1x N ( M = Mo and W )
D. Sangiovanni (2010)
10.1016/0257-8972(95)02555-3
Multilayer PVD coatings for wear protection
H. Holleck (1995)
10.1016/J.MSEA.2010.11.090
Strengthening and toughening of aluminum by single-walled carbon nanotubes
Hyunjoo Choi (2011)
10.1016/S0257-8972(96)03113-1
Dry cutting performance of HSS twist drills coated with improved TiAlN
I. J. Smith (1997)
10.1038/NMAT793
Single-wall carbon nanotubes as attractive toughening agents in alumina-based nanocomposites
G. Zhan (2003)
10.1063/1.1567797
Pathways of atomistic processes on TiN(001) and (111) surfaces during film growth: An ab initio study
D. Gall (2003)
Magnetron sputter epitaxy of AlN
J. Birch (2002)
10.1016/0040-6090(85)90333-5
Structure and properties of TiN coatings
J. Sundgren (1985)
10.1016/S0257-8972(00)00957-9
Composition, nanostructure and origin of the ultrahardness in nc-TiN/a-Si3N4/a- and nc-TiSi2 nanocomposites with HV= 80 to ≥ 105 GPa
S. Vepřek (2000)
10.1016/J.ACTAMAT.2010.12.013
Supertoughening in B1 transition metal nitride alloys by increased valence electron concentration
D G Sangiovanni (2011)
10.5860/choice.30-0953
The materials science of thin films
M. Ohring (1992)
Transition Metal Carbides and Nitrides
L. A. Toth (1971)
10.1111/J.1551-2916.2006.01083.X
Microstructure and properties of spark plasma-sintered ZrO2-ZrB2 nanoceramic composites
B. Basu (2006)
10.1557/JMR.2004.19.1.3
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
W. Oliver (2004)
10.1016/S0257-8972(95)02808-0
Cubic nitrides of the sixth group of transition metals formed by nitrogen ion irradiation during metal condensation
W. Ensinger (1996)
10.1016/0040-6090(89)90030-8
Stress-related effects in thin films
J. Thornton (1989)
Encyclopedia of Materials Characterization: Surfaces, Interfaces, Thin Films
L. Wilson (1992)
10.1016/J.ACTAMAT.2003.10.050
Direct observation of toughening mechanisms in carbon nanotube ceramic matrix composites
Z. Xia (2004)
10.1116/1.580180
Reactive magnetron sputter deposition of polycrystalline vanadium nitride films
X. Chu (1996)
10.1007/bf00809059
Transformation toughening
F. Lange (1982)
10.1016/J.DIAMOND.2003.10.043
Bias-graded deposition of diamond-like carbon for tribological applications
Sam Zhang (2003)
10.1007/BF00810062
Lattice parameters and thermal expansion of δ-VN1−x from 298–1000 K
W. Lengauer (1986)
10.1007/S11249-007-9241-X
The Beneficial Effect of High-Temperature Oxidation on the Tribological Behaviour of V and VN Coatings
N. Fateh (2007)
10.1016/J.SSI.2004.02.062
Oxidation of NiAl/Al2O3 composites for controlled development of surface layers and toughening
O. Abe (2004)
Mechanical Metallurgy: MCGRAW-HILL
GE Dieter (1988)
Microstructure and Properties of Spark Plasma-Sintered ZrO 2 -ZrB 2 Nanoceramic Composites
Bikramjit Basu (2014)
10.1016/J.JEURCERAMSOC.2009.09.032
Carbon nanotube toughened aluminium oxide nanocomposite
I. Ahmad (2010)
10.1088/0022-3727/36/21/021
Alloying effects on elastic properties of TiN-based nitrides
K. Chen (2003)
10.1103/PhysRev.136.B864
THE INHOMOGENEOUS ELECTRON GAS.
P. Hohenberg (1964)
10.1016/0167-5729(94)00005-0
Electronic and structural properties of transition-metal carbide and nitride surfaces
L. Johansson (1995)
Handbook of deposition technologies for films and coatings
P. Martin (2010)
10.1103/PHYSREVLETT.86.3348
Vacancy hardening and softening in transition metal carbides and nitrides.
S. Jhi (2001)
10.1017/CBO9780511629037.001
Electronic Structure of Refractory Carbides and Nitrides: Preface
V. Gubanov (1994)
10.1016/J.PMATSCI.2006.02.002
Microstructural design of hard coatings
P. Mayrhofer (2006)
10.1063/1.353882
Heteroepitaxial wurtzite and zinc‐blende structure GaN grown by reactive‐ion molecular‐beam epitaxy: Growth kinetics, microstructure, and properties
R. Powell (1993)
10.1103/PHYSREVB.71.144106
Elastic constants of single-crystalTiNx(001)(0.67⩽x⩽1.0)determined as a function ofxby picosecond ultrasonic measurements
T. Lee (2005)



Semantic Scholar Logo Some data provided by SemanticScholar