Online citations, reference lists, and bibliographies.

Surface Modification And Physical Properties Of Various UHMWPE-fiber-reinforced Modified Epoxy Composites

S. P. Lin, Jin-Lin Han, J. Yeh, F. Chang, K. Hsieh
Published 2007 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
Two surface modification methods—plasma surface treatment and chemical agent treatment—were used to investigate their effects on the surface properties of ultrahigh-molecular-weight polyethylene (UHMWPE) fibers. In the analyses, performed using electron spectroscopy for chemical analysis, changes in weight, and scanning electron microscope observations, demonstrated that the two fiber-surface-modified composites formed between UHMWPE fiber and epoxy matrix exhibited improved interfacial adhesion and slight improvements in tensile strengths, but notable decreases in elongation, relative to those properties of the composites reinforced with the untreated UHMWPE fibers. In addition, three kinds of epoxy resins—neat DGEBA, polyurethane-crosslinked DGEBA, and BHHBP-DGEBA—were used as resin matrices to examine the tensile and elongation properties of their UHMWPE fiber-reinforced composites. From stress/strain measurements and scanning electron microscope observations, the resin matrix improved the tensile strength apparently, but did not affect the elongation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 655–665, 2007
This paper references
10.1023/A:1018654501851
Plasma surface modification of advanced organic fibres: Part V Effects on the mechanical properties of aramid/phenolic composites
J. R. Brown (1997)
10.1002/APP.12448
Effects of sunshine UV irradiation on the tensile properties and structure of ultrahigh molecular weight polyethylene fiber
H. Zhang (2003)
10.1002/APP.20074
Effect of rare earth elements surface treatment on tensile properties of aramid fiber‐reinforced epoxy composites
X. Cheng (2004)
10.1002/APP.10407
Carbon/carbon composites derived from poly(ethylene oxide)-modified novolac-type phenolic resin: Microstructure and physical, and morphological properties
A. Hung (2002)
10.1002/pc.750130310
The effects of additives on curing properties, resin contents, and mechanical properties of graphite/epoxy composites
Wen-Yung Shu (1992)
10.1002/pen.760180402
Weathering of fiber‐reinforced epoxy composites
D. Roylance (1978)
10.1002/PC.10187
Carbon fiber reinforced phenolic Resin/Silica ceramer composites—processing, mechanical and thermal properties
J. Lin (2000)
10.1002/(SICI)1097-0126(199707)43:3<231::AID-PI797>3.0.CO;2-E
Surface Structuring of Synthetic Fibres by UV Laser Irradiation, Part I: Phenomenological Report
D. Knittel (1997)
10.1002/(SICI)1097-4628(19980808)69:6<1129::AID-APP10>3.0.CO;2-O
Mechanical properties, thermal stability, and flame retardance of pultruded fiber‐reinforced poly(ethylene oxide)‐toughened novolak‐type phenolic resin
C. Ma (1998)
10.1002/(SICI)1097-4628(19970214)63:7<911::AID-APP11>3.0.CO;2-U
Processability and properties of phenoxy resin toughened phenolic resin composites
H. Wu (1997)
10.1002/(SICI)1097-4628(19980808)69:6<1119::AID-APP9>3.0.CO;2-J
Blocked diisocyanate polyester-toughened novolak-type phenolic resin : Synthesis, characterization, and properties of composites
C. Ma (1998)
10.1002/PC.10619
Charaterization of UHMWPE fiber/matrix adhesion by dynamic mechanical spectrometry
J. J. Arnold (1996)
10.1002/PI.1372
A study of the influence of controlled corona treatment on UHMWPE fibres in reinforced vinylester composites
Zhen Zheng (2003)
10.1002/APP.21598
Chemical surface treatment of ultrahigh molecular weight polyethylene for improved adhesion to methacrylate resins
S. Debnath (2005)
10.1002/apmc.1991.051840108
POLYURETHANE-CROSSLINKED EPOXY RESINS. II, COMPATIBILITY AND MORPHOLOGY
J. Han (1991)
10.1016/S0266-3538(00)00024-5
Relaxation processes in polyethylene fibre-reinforced polyethylene composites
A. Pegoretti (2000)
10.1016/S0266-3538(98)00093-1
The effect of the oxygen-plasma treatment of UHMWPE fiber on the transverse properties of UHMWPE-fiber/vinylester composites
S. I. Moon (1999)
10.1021/ma00193a077
Thermal and rheological properties of a liquid-crystalline polyurethane
P. Stenhouse (1989)
10.1002/apmc.1990.051820114
Polyurethane-crosslinked epoxy resins. I, Mechanical behavior
J. Han (1990)
10.1007/S11029-005-0045-5
The Effect of Surface Treatment of F-12 Aramid Fibers with Rare Earths on the Interlaminar Shear Strength of Aramid/Epoxy Composites
J. Wu (2005)
10.1002/POLB.10727
Surface modification of ultrahigh-molecular-weight polyethylene fibers
Zhen Zheng (2004)
10.1016/0266-3538(93)90131-Y
Relationship between surface properties and adhesion for etched ultra-high-molecular-weight polyethylene fibers
M. Silverstein (1993)
10.1002/pola.1986.080240923
Crosslinked polydiacetylene and its two- and three-component interpenetrating polymer networks (IPNs)
Prasad V. S. Ika (1986)
10.1002/(SICI)1097-4628(19990808)73:6<881::AID-APP4>3.0.CO;2-I
Mechanical properties, morphology, and flame retardance of glass fiber‐reinforced polyamide‐toughened novolac‐type phenolic resin
Feng-Yih Wang (1999)



This paper is referenced by
10.4028/www.scientific.net/AMR.781-784.2605
Effects of Oxygen-Plasma Treatment Time on the Properties of UHMWPE Fiber
Wen Yu Wang (2013)
10.1002/PAT.3746
Improved mechanical properties of epoxy‐based composites with hyperbranched polymer grafting glass‐fiber
Shuiping Li (2016)
10.1007/s10853-016-0077-3
Effects of extreme transverse deformation on the strength of UHMWPE single filaments for ballistic applications
K. Golovin (2016)
10.1016/J.JFLUCHEM.2014.05.002
Comparison of the surface modifications of polymers induced by direct fluorination and rf-plasma using fluorinated gases
Alexander P. Kharitonov (2014)
10.1002/APP.40350
Nylon-coated ultra high molecular weight polyethylene fabric for enhanced penetration resistance
Dariush Firouzi (2014)
10.1038/s41598-019-43629-1
Nanoparticle-Infused UHMWPE Layer as Multifunctional Coating for High-Performance PPTA Single Fibers
Zhuolei Zhang (2019)
10.1007/s10853-015-9488-9
Enhancing the mechanical properties of epoxy resin by addition of an amino-terminated hyperbranched polymer grown on glass fiber
Shuiping Li (2015)
10.1016/J.RADPHYSCHEM.2013.01.045
Crystal structure and mechanical properties of UHMWPE-g-PMA fiber prepared by radiation grafting
Zhe(邢哲) Xing (2013)
10.1002/HTTPS://DOI.ORG/10.6028/NIST.IR.8265
A new method for tensile testing UHMMPE single fibers at high temperatures and strain-rates
Donald R. Jenket (2019)
10.1007/S00289-011-0491-2
Interfacial adhesion study on UHMWPE fiber-reinforced composites
Xiaokang Zhang (2011)
10.1002/APP.36749
Preparation and properties of cured diallyl phthalate resin modified with dimeric acid polyamide derivatives
Keiko Ohtsuka (2012)
10.1016/J.SYNTHMET.2011.03.004
The effect of polypyrrole coatings on the adhesion and structure properties of UHMWPE fiber
Xin Jin (2011)
10.1002/APP.45562
Facile synthesis of silicone‐toughened unsaturated polyester by hydroxyl‐terminated silicone copolycondensation
Dawei Xu (2018)
10.1515/epoly-2019-0006
Effect of surface modifications on the properties of UHMWPE fibres and their composites
Cuiyu Li (2019)
10.1007/s00289-012-0873-0
Properties of UHMWPE fiber-reinforced composites
Xiaokang Zhang (2012)
10.1002/APP.43751
Interfacial evaluation of epoxy/carbon nanofiber nanocomposite reinforced with glycidyl methacrylate treated UHMWPE fiber
Mojtaba Ahmadi (2016)
10.1016/J.APSUSC.2016.11.215
Influence of DBD plasma pretreatment on the deposition of chitosan onto UHMWPE fiber surfaces for improvement of adhesion and dyeing properties
Yu Ren (2017)
10.1002/APP.38652
Enhanced adhesion of polypyrrole/PW12O 403− hybrid coatings on polyester fabrics
José-Miguel Molina (2013)
10.3390/FIB7050046
Development of Oxygen-Plasma-Surface-Treated UHMWPE Fabric Coated with a Mixture of SiC/Polyurethane for Protection against Puncture and Needle Threats
Dariush Firouzi (2019)
10.1177/0021998317728781
Structure and mechanical properties of self-reinforced ultra-high molecular weight polyethylene
D. I. Chukov (2018)
10.1002/app.49335
The influence of several silicates on the fretting behavior of UHMWPE composites
Zhaojie Meng (2020)
10.5937/TEHNIKA1806757Z
Mechanical properties of UHMWPE/EVA hybrid composite reinforced with fibers obtained by electrospinning
Jelena Zec (2018)
10.1039/C5RA11810G
Various surface functionalizations of ultra-high-molecular-weight polyethylene based on fluorine-activation behavior
Baoyin Li (2015)
10.1002/APP.31629
Preparation and cured properties of diallyl phthalate resin modified with epoxy resin and allyl ester compound having carboxylic acid
Keiko Ohtsuka (2009)
10.1002/SIA.6336
Surface treatment of ultra‐high molecular weight polyethylene fibers using potassium permanganate and mechanical properties of its composites
Weiwei Li (2018)
10.1177/0892705717718240
Processing and characterization of UHMWPE composite fibres with alumina particles in poly(ethylene-vinyl acetate) matrix
Jelena Zec (2018)
10.1007/s00289-016-1633-3
Mechanical characterization of epoxy composites with glass fibers grafted by hyperbranched polymer with amino terminal groups
Shuiping Li (2016)
10.1177/0954008320923385
On the mechanical and morphological properties of highly performant composite laminates based on epoxy resin and oxidized ultrahigh-molecular-weight polyethylene fibers:
Raouf Belgacemi (2020)
10.1016/J.COMPOSITESB.2018.07.031
Optimization of Al2O3 particle modification and UHMWPE fiber oxidation of EVA based hybrid composites: Compatibility, morphological and mechanical properties
Jelena Zec (2018)
10.4028/www.scientific.net/AMR.499.90
Surface Properties of UHMWPE Fiber after Low Temperature Argon-Plasma Treatment
Jin Yun Xu (2012)
10.1016/J.EURPOLYMJ.2018.05.021
Long UHMWPE fibers reinforced rigid polyurethane composites: An investigation in mechanical properties
Li Meng (2018)
10.4028/www.scientific.net/AMR.168-170.1695
Structure and Interfacial Property of UHMWPE Fiber Treated by Pyrrole Vapor Deposition
Cun Zhou (2010)
See more
Semantic Scholar Logo Some data provided by SemanticScholar