Online citations, reference lists, and bibliographies.

Surrogate-based Visualization And Sensitivity Analysis Of Coronary Stent Performance: A Study On The Influence Of Geometric Design.

Nelson S Ribeiro, João Orlando Marques Gameiro Folgado, Hélder C. Rodrigues
Published 2018 · Mathematics, Medicine
Cite This
Download PDF
Analyze on Scholarcy
Share
The main goal of this numerical study is to assess the impact of geometric design perturbations on the performance of a representative coronary stent platform. In this context, first, a design parameterization model was defined for the stent under study. After, a set of metrics characterizing stent performance, namely, vessel injury, radial recoil, bending resistance, longitudinal resistance, radial strength, the risk of fracture, prolapse index, and dogboning were evaluated within the context of a finite element analysis. Afterwards, accurate surrogate models were developed, using the efficient global optimization algorithm, as predictive tools in the execution of tasks that normally require a high number of model evaluations, such as global sensitivity analysis and visualization. In the end, the dependence of the output response surfaces on the geometric parameters was mechanically interpreted, which allowed us to understand the complex interplay that exists between the considered design variables and the defined performance metrics.
This paper references
10.1016/j.jmbbm.2012.02.013
Comparing coronary stent material performance on a common geometric platform through simulated bench testing.
James A. Grogan (2012)
10.1016/0951-8320(96)00002-6
Importance measures in global sensitivity analysis of nonlinear models
Toshimitsu Homma (1996)
10.1007/S13239-012-0104-8
A Computational Test-Bed to Assess Coronary Stent Implantation Mechanics Using a Population-Specific Approach
Claire Conway (2012)
10.1016/j.medengphy.2014.02.004
Simulation of longitudinal stent deformation in a patient-specific coronary artery.
Georgios E. Ragkousis (2014)
10.1152/ajpheart.00934.2004
Determination of layer-specific mechanical properties of human coronary arteries with nonatherosclerotic intimal thickening and related constitutive modeling.
Gerhard A. Holzapfel (2005)
10.1016/j.medengphy.2008.11.005
The influence of plaque composition on underlying arterial wall stress during stent expansion: the case for lesion-specific stents.
Ian Owens Pericevic (2009)
10.1007/s10439-014-1237-8
Computational Modelling of Multi-folded Balloon Delivery Systems for Coronary Artery Stenting: Insights into Patient-Specific Stent Malapposition
Georgios E. Ragkousis (2014)
10.1115/1.1835362
Changes in the mechanical environment of stenotic arteries during interaction with stents: computational assessment of parametric stent designs.
Gerhard A. Holzapfel (2005)
10.1016/j.biomaterials.2005.10.012
Fatigue and life prediction for cobalt-chromium stents: A fracture mechanics analysis.
Ramesh V. Marrey (2006)
10.1016/j.jbiomech.2014.01.007
Influence of plaque calcifications on coronary stent fracture: a numerical fatigue life analysis including cardiac wall movement.
Stefano Morlacchi (2014)
10.1007/s10237-011-0293-3
Geometry parameterization and multidisciplinary constrained optimization of coronary stents
Sanjay Pant (2012)
A statistical approach to some basic mine valuation problems on the Witwatersrand, by D.G. Krige, published in the Journal, December 1951 : introduction by the author
D. G. Krige (1951)
10.1080/00949659708811825
Sensitivity measures,anova-like Techniques and the use of bootstrap
Glen E. Archer (1997)
10.1016/j.jmatprotec.2006.12.010
An FEA method to study flexibility of expanded coronary stents
Wei Wu (2007)
10.1016/j.patbio.2004.03.013
The influence of physical stent parameters upon restenosis.
Allison C. Morton (2004)
The Development of a Computational Test-Bed to Assess Coronary Stent Implantation
Claire Conway (2013)
10.1016/j.cad.2012.03.009
Computational modeling of effects of intravascular stent design on key mechanical and hemodynamic behavior
Hao-Ming Hsiao (2012)
10.1016/J.MATDES.2015.10.153
Multiobjective robust optimization of coronary stents
Sriram Tammareddi (2016)
10.1002/cnm.2557
Finite element analysis of balloon-expandable coronary stent deployment: influence of angioplasty balloon configuration.
David Moral Martín (2013)
10.1007/S00158-013-1038-Y
NURBS modeling and structural shape optimization of cardiovascular stents
Rory P. Clune (2014)
10.1115/1.4030583
Coronary Stent Design Optimization Using Parametric and Nonparametric Approaches—A Proof of Concept Study
Manojkumar Chinnakonda (2015)
10.1016/J.JBIOMECH.2007.08.014
Realistic finite element-based stent design: the impact of balloon folding.
Matthieu De Beule (2008)
10.1109/VISUAL.1991.175796
Visualization and analysis of multi-variate data: a technique for all fields
Ted Mihalisin (1991)
10.1016/j.biomaterials.2010.01.146
A platinum-chromium steel for cardiovascular stents.
Barry J. O'Brien (2010)
10.1115/1.4023094
On the importance of modeling stent procedure for predicting arterial mechanics.
Shijia Zhao (2012)
10.4244/EIJV8I2A42
Engineering assessment of the longitudinal compression behaviour of contemporary coronary stents.
Santosh Prabhu (2012)
10.4244/EIJ30V6I4A85
Vascular response to a third generation everolimus-eluting stent.
Gregory J. Wilson (2010)
10.1016/j.jacc.2010.07.028
In-stent restenosis in the drug-eluting stent era.
George D Dangas (2010)
10.1016/j.jmbbm.2012.06.011
Fatigue life assessment of cardiovascular balloon-expandable stents: a two-scale plasticity-damage model approach.
H A F Argente dos Santos (2012)
10.1007/s10898-004-6733-1
On the Design of Optimization Strategies Based on Global Response Surface Approximation Models
Andras Sobester (2005)
10.1016/j.jcin.2011.11.002
Stent longitudinal integrity bench insights into a clinical problem.
John A Ormiston (2011)
10.1016/j.paerosci.2005.02.001
Surrogate-based analysis and optimization
Néstor V. Queipo (2005)
10.1016/j.jacc.2011.02.016
A prospective, randomized evaluation of a novel everolimus-eluting coronary stent: the PLATINUM (a Prospective, Randomized, Multicenter Trial to Assess an Everolimus-Eluting Coronary Stent System [PROMUS Element] for the Treatment of Up to Two de Novo Coronary Artery Lesions) trial.
Gregg W. Stone (2011)
10.1115/1.2246236
Effects of stent design parameters on normal artery wall mechanics.
Julian Bedoya (2006)
10.1115/1.2904467
Numerical study of the uniformity of balloon-expandable stent deployment.
Peter Mortier (2008)
10.1002/9780470770801
Engineering Design via Surrogate Modelling - A Practical Guide
Alexander I. J. Forrester (2008)
10.1016/j.jbiomech.2003.09.002
Numerical investigation of the intravascular coronary stent flexibility.
Lorenza Petrini (2004)
10.1007/s11249-007-9230-0
Macroscopic Friction Coefficient Measurements on Living Endothelial Cells
Alison C. Dunn (2007)
10.1023/A:1008306431147
Efficient Global Optimization of Expensive Black-Box Functions
Donald R. Jones (1998)
10.1109/TBME.2006.889188
Predictive Haemodynamics in a One-Dimensional Human Carotid Artery Bifurcation. Part I: Application to Stent Design
Vijaya B. Kolachalama (2007)
10.1002/psp4.6
Sobol Sensitivity Analysis: A Tool to Guide the Development and Evaluation of Systems Pharmacology Models
X. Zhang (2015)
10.1016/j.jbiomech.2004.11.003
Analysis of the transient expansion behavior and design optimization of coronary stents by finite element method.
Wei-Qiang Wang (2006)
10.1080/10255840108908007
Finite-element Analysis of a Stenotic Artery Revascularization Through a Stent Insertion
Ferdinando Auricchio (2001)
10.1007/s10439-009-9836-5
A Novel Simulation Strategy for Stent Insertion and Deployment in Curved Coronary Bifurcations: Comparison of Three Drug-Eluting Stents
Peter Mortier (2009)
10.1007/s10237-010-0196-8
Modelling of the provisional side-branch stenting approach for the treatment of atherosclerotic coronary bifurcations: effects of stent positioning
Dario Gastaldi (2010)
10.1016/j.cpc.2009.09.018
Variance based sensitivity analysis of model output. Design and estimator for the total sensitivity index
Andrea Saltelli (2010)
10.4244/EIJV7I7A135
Longitudinal compression: a "new" complication with modern coronary stent platforms--time to think beyond deliverability?
Colm G. Hanratty (2011)
10.1016/0021-9290(94)90209-7
Static circumferential tangential modulus of human atherosclerotic tissue.
Howard Martin Loree (1994)
10.1016/J.COMMATSCI.2013.01.031
Numerical investigations of the structural behavior of a balloon expandable stent design using finite element method
M. Azaouzi (2013)
10.1016/j.biomaterials.2011.07.059
Multiobjective design optimisation of coronary stents.
Sanjay Pant (2011)
10.1016/S0021-9290(02)00033-7
Mechanical behavior of coronary stents investigated through the finite element method.
Francesco Migliavacca (2002)
10.1016/j.medengphy.2008.11.002
Assessment of tissue prolapse after balloon-expandable stenting: influence of stent cell geometry.
Claudio Capelli (2009)
10.1161/CIR.0000000000000558
Heart Disease and Stroke Statistics—2018 Update: A Report From the American Heart Association
Emelia J. Benjamin (2018)
10.1007/s00392-002-1317-x
Influence of stent design and deployment technique on neointima formation and vascular remodeling
Andreas König (2002)
10.1038/labinvest.2011.57
INCREASED ARTERY WALL STRESS POST-STENTING LEADS TO GREATER INTIMAL THICKENING
Lucas H. Timmins (2011)
10.1016/j.biomaterials.2013.07.010
Optimizing the design of a bioabsorbable metal stent using computer simulation methods.
James A. Grogan (2013)



This paper is referenced by
Semantic Scholar Logo Some data provided by SemanticScholar