FT-IR Characterization And Hydrolysis Of PLA-PEG-PLA Based Copolyester Hydrogels With Short PLA Segments And A Cytocompatibility Study
D. Wang, S. Varanasi, P. Fredericks, D. J. Hill, A. Symons, A. Whittaker, F. Rasoul
Published 2013 · Chemistry
Download PDFAnalyze on Scholarcy
ABSTRACT A series of the biodegradable copolyester hydrogels was prepared using a redox-initiated polymerization with a constant 1:9 mole ratio of the Boltorn-based acrylate and diacrylate triblock comacromonomers. The Boltorn® macromonomer was derived from the hyperbranched polyester Boltorn H20, which was functionalized at each terminus with poly(ethylene glycol) acrylate, and the diacrylate triblock macromonomer was poly (lactide-b-ethylene glycol-b-lactide) diacrylate. The hydrolysis of the copolyesters at pH 7.4 in a phosphate buffered saline solution at 37 °C was studied using ATR-FTIR spectroscopy. It was found that the presence of the Boltorn, the PEG, and lactide block lengths both play vital roles in determining the structure-property relationships in these materials. The ATR-FTIR studies showed that with increasing lactide segment length, the rate of ester hydrolysis increased due to the increased concentration of the hydrolytically sensitive poly(lactic acid) (PLA) ester groups in the network. However, incorporation of Boltorn into the PLA-PEG-PLA copolymer did not significantly change the kinetic rate constant for hydrolysis of the PLA segments. The cytocompatibility of a typical one of these materials in the presence of its degradation by-products was assessed using cultured osteoblasts from the rat. The hydrogel was degraded for 28 days and found to be cytocompatible with osteoblasts over days 23 to 28 of the hydrolysis period.
This paper references
Rockwood and Green's Fractures in Adults
C. Rockwood (1991)
Aliphatic Polyesters: Synthesis, Properties and Applications
A. Albertsson (2002)
Molecular Vibrations and Structure of High Polymers. III. Polarized Infrared Spectra, Normal Vibrations, and Helical Conformation of Polyethylene Glycol
T. Miyazawa (1962)
IR spectra and hydration of short-chain polyethyleneglycols
M. Rozenberg (1998)
The influence of composition on the physical properties of PLA-PEG-PLA-co-Boltorn based polyester hydrogels and their biological performance
David C. Wang (2012)
Biodegradation and biocompatibility of PLA and PLGA microspheres.
Structure, Binding Energies, and IR-Spectral Fingerprinting of Formic Acid Dimers.
I. Yavuz (2008)
Encapsulation and controlled release of a hydrophobic drug using a novel nanoparticle-forming hyperbranched polyester.
J. Zou (2005)
Vibrational analysis of molten poly(ethylene glycol)
H. Matsuura (1969)
Photo-cross-linked PLA-PEO-PLA hydrogels from self-assembled physical networks: mechanical properties and influence of assumed constitutive relationships.
Naomi Sanabria-Delong (2008)
METHACRYLOYL DERIVITIZED HYPERBRANCHED POLYESTER. 2. PHOTO-POLYMERIZATION AND PROPERTIES FOR DENTAL RESIN SYSTEMS
Qichun Wan (2000)
Biodegradable polydioxanone and poly(l/d)lactide implants: an experimental study on peri-implant tissue response.
R. Kontio (2005)
Rheological studies of PLLA-PEO-PLLA triblock copolymer hydrogels.
K. Aamer (2004)
Poly-DL-lactic acid: polyethylene glycol block copolymers. The influence of polyethylene glycol on the degradation of poly-DL-lactic acid.
S. S. Shah (1994)
Analysis of the C═O Stretching Band of the α-Crystal of Poly(l-lactide)
Emilio Meaurio (2009)
Poly(DL-lactide)/poly(ethylene glycol) copolymer particles. I. Preparation and characterization
E. Çelikkaya (1996)
Marked inflammatory sequelae to implantation of biodegradable and nonbiodegradable polymers in porcine coronary arteries.
W. J. van der Giessen (1996)
Vibrational spectra of lactic acid and lactates
G. Cassanas (1991)
Effect of soft segment on degradation kinetics in polyethylene glycol/poly(l-lactide) block copolymers
David Shiaw-Guang Hu (1993)
Effects of Polyethylene Glycol on Bovine Intestine Alkaline Phosphatase Activity and Stability
S. Sekiguchi (2011)
Response of Bone and Periodontal Ligament Cells to Biodegradable Polymer Scaffolds In Vitro
Kerstin Schander (2010)
Folate-conjugated amphiphilic hyperbranched block copolymers based on Boltorn H40, poly(L-lactide) and poly(ethylene glycol) for tumor-targeted drug delivery.
M. Prabaharan (2009)
An in vitro study of plasticized poly(lactic-co-glycolic acid) films as possible guided tissue regeneration membranes: material properties and drug release kinetics.
G. Owen (2010)
Hydrolytic degradation of PLA/PEO/PLA triblock copolymers prepared in the presence of Zn metal or CaH2
S. Li (1998)
Infrared Spectrum of Poly(l-lactide): Application to Crystallinity Studies
E. Meaurio (2006)
Effects of morphology, conformation and configuration on the IR and Raman spectra of various poly(lactic acid)s
G. Kister (1998)
Vascular inflammation and repair: implications for re-endothelialization, restenosis, and stent thrombosis.
T. Inoue (2011)
Multilayer microfluidic PEGDA hydrogels.
Michael P. Cuchiara (2010)
Surface characterization of poly(L-lactic acid)-methoxy poly(ethylene glycol) diblock copolymers by static and dynamic contact angle measurements, FTIR, and ATR-FTIR.
Olcay Mert (2008)
Glycodendritic structures based on Boltorn hyperbranched polymers and their interactions with Lens culinaris lectin.
E. Arcé (2003)
Hydrolytic and enzymatic degradations of physically crosslinked hydrogels prepared from PLA/PEO/PLA triblock copolymers
S. Li (2002)
FTIR analysis of hydrolysis in aliphatic polyesters
M. Partini (2007)
ABA-triblock copolymers from biodegradable polyester A-blocks and hydrophilic poly(ethylene oxide) B-blocks as a candidate for in situ forming hydrogel delivery systems for proteins.
T. Kissel (2002)
Degradable aliphatic polyesters
A.-C. Albertsson (2002)
Synthesis of a new hyperbranched, vinyl macromonomer through the use of click chemistry: Synthesis and characterization of copolymer hydrogels with PEG diacrylate
David C. Wang (2012)
Amine-modified hyperbranched polyesters as non-toxic, biodegradable gene delivery systems.
Regina Reul (2009)
Glass transition and disorder-to-order phase transition behavior of poly(l-lactic acid) revealed by infrared spectroscopy
J. Zhang (2010)
Synthesis, Characterization, and Hydrolytic Degradation of PLA/PEO/PLA Triblock Copolymers with Short Poly(l-lactic acid) Chains
I. Rashkov (1996)
Influence of hyperbranched multi-methacrylates for dental neat resins on proliferation of human gingival fibroblasts.
Q. Wan (2001)
Conformational behavior of poly(L-lactide) studied by infrared spectroscopy.
E. Meaurio (2006)
Influence of network structure on the degradation of photo-cross-linked PLA-b-PEG-b-PLA hydrogels.
Nihar M. Shah (2006)
Cellular and Molecular Changes in Orthodontic Tooth Movement
Shahrul Hisham Zainal Ariffin (2011)
Foreign body reaction to biomaterials.
J. Anderson (2008)
Infrared and Raman characteristic group frequencies : tables and charts
G. Socrates (2001)
Synthesis and Characterization of Block Copolymers of Polyoxyethylene and Polylactide with Different Architectures
Shao-Min Mai (2009)
Self-assembled micelles from an amphiphilic hyperbranched copolymer with polyphosphate arms for drug delivery.
J. Liu (2010)
Modulation of isoflavones on bone-nodule formation in rat calvaria osteoblasts in vitro.
Hao Chang (2003)
Tumor-targeting, pH-responsive, and stable unimolecular micelles as drug nanocarriers for targeted cancer therapy.
Xiaoqiang Yang (2010)
Biodegradable and biocompatible multi-arm star amphiphilic block copolymer as a carrier for hydrophobic drug delivery.
S. Aryal (2009)
Protein release from physically crosslinked hydrogels of the PLA/PEO/PLA triblock copolymer-type.
I. Molina (2001)
Degradable thiol-acrylate photopolymers: polymerization and degradation behavior of an in situ forming biomaterial.
Amber E. Rydholm (2005)
Stereoselective Crystallization and Specific Interactions in Polylactides
Jose-Ramon Sarasua (2005)
This paper is referenced by
Innovative Magnetic Nanoparticles for PET/MRI Bimodal Imaging
G. Thomas (2019)
PREPARATION AND DEGRADATION STUDY OF HDPE/PLA POLYMER BLENDS FOR PACKAGING APPLICATIONS
Aidé M. Torres-Huerta (2019)
Electrospun tubes based on PLA, gelatin and genipin in different arrangements for blood vessel tissue engineering
Abraham Alejandro Leyva-Verduzco (2019)
Non-toxic polyester urethanes based on poly(lactic acid), poly(ethylene glycol) and lysine diisocyanate
Alena Pavelková (2017)
Amphiphilic polymer-mediated formation of laponite-based nanohybrids with robust stability and pH sensitivity for anticancer drug delivery.
Guoying Wang (2014)
Study of the Influence of the Reprocessing Cycles on the Final Properties of Polylactide Pieces Obtained by Injection Molding
Á. Agüero (2019)
A systematic study and effect of PLA/Al2O3 nanoscaffolds as dental resins: mechanochemical properties
Mehdi Ranjbar (2019)
Versatile synthesis of comb-shaped poly(lactic acid) copolymers with poly(acrylic acid)-based backbones and carboxylic acid end groups
Pavel Kucharczyk (2017)
Claisen-type degradation mechanism of cellulose triacetate membranes in ethanol-water mixtures
David Wang (2014)
Development of drug-loaded polymeric nanomicelles for stem cell osteogenic differentiation
Pedro Oliveira Lavrador (2017)
Efficient functionalization of magnetite nanoparticles with phosphonate using a one-step continuous hydrothermal process.
G. Thomas (2016)
A gelatin/PLA-b-PEG film of excellent gas barrier and mechanical properties
Lijun Ji (2018)
Synthesis and characterization of a POSS-PEG macromonomer and POSS-PEG-PLA hydrogels for periodontal applications.
David K. Wang (2014)
Engineering of Poly Lactic Acids (PLAs) for melt processing: Material structure and thermal properties
Massimiliano Barletta (2017)
Self-supported branched poly(ethyleneimine) materials for CO2 adsorption from simulated flue gas
Chun-Jae Yoo (2019)
Novel biorenewable composite of wood polysaccharide and polylactic acid for three dimensional printing.
Wenyang Xu (2018)
Morphology controlled porous poly(lactic acid)/zeolitic imidazolate framework-8 fibrous membranes with superior PM2.5 capture capacity
Xiu Dai (2018)
Investigating composite systems based on poly L-lactide and poly L-lactide/triclosan nanoparticles for tissue engineering and medical applications.
S. M. Davachi (2016)
The PLA/ZIF‐8 Nanocomposite Membranes: The Diameter and Surface Roughness Adjustment by ZIF‐8 Nanoparticles, High Wettability, Improved Mechanical Property, and Efficient Oil/Water Separation
Xiu Dai (2016)
Highly Compliant Vascular Grafts with Gelatin-Sheathed Coaxially Structured Nanofibers.
Naveen Nagiah (2015)
A shape memory copolymer based on 2-(dimethylamino)ethyl methacrylate and methyl allyl polyethenoxy ether for potential biological applications
Yangyang Chen (2015)
Properties of UV-curable screen printing inks containing oligolactide acrylates
S. Kulsiriswad (2018)
In vitro degradation of electrospun poly(l-lactic acid)/segmented poly(ester urethane) blends
Florencia Montini-Ballarin (2016)
Preparation, characterization and in vitro evaluation of ε-polylysine-loaded polymer blend microparticles for potential pancreatic cancer therapy
Merari Tumin Chevalier (2017)
Interaction and quantification of thymol in active PLA‐based materials containing natural fibers
Intan S. M. A. Tawakkal (2016)
Surface-Initiated Poly(oligo(2-alkyl-2-oxazoline)methacrylate) Brushes.
Pei Tang (2018)
Cholesterol-conjugated poly(D, L-lactide)-based micelles as a nanocarrier system for effective delivery of curcumin in cancer therapy
Preeti Kumari (2017)
Para-amino benzoic acid doped micro-grooved carbon fibers to improve strength and biocompatibility of PLA-PEG
Yanni Shi (2016)
Full pH-range responsive hyperbranched polyethers: synthesis and responsiveness
Yumin Xia (2014)
Synthesis and characterization of hydrogels from 1-vinylimidazole. Highly resistant co-polymers with synergistic effect
Gastón A. Primo (2015)
Fractionated crystallization and fractionated melting behaviors of poly(ethylene glycol) induced by poly(lactide) stereocomplex in their block copolymers and blends
Jianna Bao (2020)
Mechanical characterization of the Poly lactic acid (PLA) composites prepared through the Fused Deposition Modelling process
M. Vinyas (2019)See more