Online citations, reference lists, and bibliographies.

The Development Of Ring Rolling Technology, Part 2: Investigation Of Process Behaviour And Production Equipment

Julian M. Allwood, A. Erman Tekkaya, Tf Stanistreet
Published 2005 · Engineering
Cite This
Download PDF
Analyze on Scholarcy
Share
This is the continuation of a thorough survey of work on ring rolling published in the English and German languages up to 2004 [see No. 2/3, p.111-120]: The methods used to investigate the process are reviewed, separated into experimental and theoretical categories; the insights gained from these investigations are organised according to the challenges identified at the outset; developments in the control and operation of the process are described. Having given a set of ideal targets for the process, the state of current knowledge about ring rolling is assessed in order to predict likely developments: process modelling capability is nearly able to predict rolling behaviour for a complete cycle with sufficient accuracy to allow effective use of models for design of rolling schedules and preforms; analysis of material behaviour is relatively mature for steel rings, but has scope for significant extension for titanium and aluminium alloys and composites; design choices that seek to extend the flexibility of the process have had some exploration, but could be extended.



This paper is referenced by
10.1016/j.cirp.2007.10.006
Icremental bulk metal forming
P. Groche (2007)
10.1016/J.PROMFG.2018.07.172
Effects of rolling curve on recrystallization evolution during hot radial-axial ring rolling of super lager alloy steel ring
Lin Yi Hua (2018)
10.1016/J.JMATPROTEC.2015.01.006
Quantitative formability estimation of ring rolling process by using deformation processing map
Tae-Dong Kil (2015)
10.1051/MATECCONF/20152103006
Research on automatic loading & unloading technology for vertical hot ring rolling process
Wang Xiao-kai (2015)
10.1179/1743281214Y.0000000252
Effects of forming parameters on coupled thermomechanical behaviours in combined ring rolling
Dong Qian (2015)
10.1504/IJMPT.2017.10000802
Recent development of ring rolling theory and technique
Lin Yi Hua (2017)
10.1007/S00170-015-7200-5
Feeding interval design considering multiconstraints in flat ring rolling process
Wujiao Xu (2015)
10.1016/J.IJMACHTOOLS.2016.09.003
Modeling and application of ring stiffness condition for radial-axial ring rolling
Lin Hua (2016)
10.1179/1743284711Y.0000000015
Heat treating of a ring rolled Ni–Fe–Cr superalloy
Octavio Covarrubias (2012)
10.1007/s11665-017-3119-3
Evolution of Residual Stress and Distortion of Cold-Rolled Bearing Ring from Annealing to Quenched-Tempered Heat Treatment
Bohan Lu (2018)
10.1016/J.CIRP.2016.04.002
Ring rolling with variable wall thickness
Christopher Cleaver (2016)
10.1007/S00170-015-7839-Y
Effects of blank dimension on forming characteristics during conical-section ring rolling of Inco718 alloy
Xinglin Zhu (2016)
10.1179/026708310X12677993662005
Effect of heat treatment on mechanical properties of alloy 909
Octavio Covarrubias (2011)
10.1007/S12541-016-0095-8
Microstructure evolution of inconel 718 alloy during ring rolling process
Xinglin Zhu (2016)
10.1007/S12289-019-01475-6
Control of ring rolling with variable thickness and curvature
Matthew R. Arthington (2020)
10.1016/J.CIRP.2016.06.002
Closed-loop control of product properties in metal forming
Julian M. Allwood (2016)
10.1007/S00170-017-1549-6
Effect of rolling passes on thermal parameters and microstructure evolution via ring-rolling process of GH4738 superalloy
Yang Hu (2018)
10.1016/j.jmatprotec.2020.116663
The influence of constraint rolls on temperature evolution and distribution in radial ring rolling
Johannes Lohmar (2020)
10.1016/J.JMATPROTEC.2019.116364
Investigation of bond formation behaviour in composite ring rolling
Stefan Guenther (2020)
10.1016/J.IFACOL.2016.10.128
Curvature control in radial-axial ring rolling
Matthew R. Arthington (2016)
10.1007/S00170-017-1512-6
Precision rolling methods for groove-section ring based on different contact and feed mode
Dongsheng Qian (2018)
Semantic Scholar Logo Some data provided by SemanticScholar