Online citations, reference lists, and bibliographies.
Please confirm you are human
(Sign Up for free to never see this)
← Back to Search

A Comparison Among Neo-Hookean Model, Mooney-Rivlin Model, And Ogden Model For Chloroprene Rubber

Beomkeun Kim, S. Lee, Jayone Lee, S. Cho, H. Park, Sanghoon Yeom, S. Park
Published 2012 · Materials Science

Save to my Library
Download PDF
Analyze on Scholarcy
Neo-Hookean model and Mooney-Rivlin model are hyperelastic material models where the strain energy density function is made from invariants of the left Cauchy-Green deformation tensor. Even though Ogden model is a hyperelastic material model, its strain energy density function is expressed by principal stretch ratio. These three models have been widely used in industries. Recently, Ogden model, especially Ogden 3rd model, shows better agreement with the test data than others. In spite of the limitations to describe particular stress states, it is known that reasonable results using these models can be obtained for various structural components. In this research, three kinds of models are considered for Chloroprene rubber. Three kinds of tests (Uniaxial tension test, Biaxial tension test, and Planar shear test) are performed for Chloroprene specimen and through four kinds of test combinations (Uni+Bi, Uni+Pl, Bi+Pl, Uni+Bi+Pl), numerical simulations are carried out for Neo-Hookean model, Mooney-Rivlin model, and Ogden model. It is shown that Mooney-Rivlin model and Ogden model can be used for Chloroprene Rubber in the specific ranges for Isotropic Hyperelastic model.
This paper references

This paper is referenced by
Positive pressure induced channeled suction cups
S. Yang (2013)
Effects of Thermal Reflowing Stress on Mechanical Properties of Novel SMT-SREKs
M. Cai (2019)
Modelling the Nanomechanical Responses of Biofilms Grown on the Indenter Probe
Y. Xia (2018)
RRCC_A_173086 43..56
Muhammad Umer (2019)
Identification of the visco-hyperelastic properties of brain white matter based on the combination of inverse method and experiment
Q. Liu (2018)
Investigation of hyperelastic models for nonlinear elastic behavior of demineralized and deproteinized bovine cortical femur bone.
M. Hosseinzadeh (2016)
Reverse pneumatic artificial muscles (rPAMs): Modeling, integration, and control
Erik H. Skorina (2018)
Research on bending forming method of large diameter-thickness ratio thin-walled tubes for aerospace
Lanfang Jiang (2019)
Behavior characterization of visco-hyperelastic models for rubber-like materials using genetic algorithms
J. A. López-Campos (2019)
Nonlinear finite element analysis and experimental study on the stiffness of rubber joint
Guangwu Zhou (2020)
Mechanical characterization of aortas using 2D ultrasound elastography
Richard Loptata (2014)
3D Printed Organ Models for Surgical Applications.
Kaiyan Qiu (2018)
A multi-scale finite element approach to mechanical performance of polyurethane/CNT nanocomposite foam
M. Javid (2020)
A Biaxial Strain–Based Expansion Mechanism for Auxetic Stent Deployment
Faiza Bukhari (2017)
Cracking energy density calculation of hyperelastic constitutive model and its application in rubber fatigue life estimations
Y. Peng (2016)
Study of pilot's comfortness in the cockpit seat of a flight simulator
V. Kumar (2019)
Modelling of a Soft Actuator for a Planar Manipulator Table
Zixiao Chen (2018)
Closed-form and numerical stress solution-based parameter identification for incompressible hyper-viscoelastic solids subjected to various loading modes
Bálint Fazekas (2019)
Elastic Inflatable Actuators for Soft Robotic Applications.
B. Gorissen (2017)
A Novel Pneumatic Soft Gripper with a Jointed Endoskeleton Structure
Z. Wu (2019)
FEM-based evaluation of friction and initial imperfections effects on sandwich pipes local buckling
D. Fernández-Valdés (2020)
Contact Pressure and Strain Energy Density of Hyperelastic U-shaped Monolithic Seals under Axial and Radial Compressions in an Insulating Joint: A Numerical Study
Jinmu Jung (2017)
Non-Contact Intraocular Pressure Measurement Method using Relation between Deformed Cornea and Reflected Pneumatic Pressure
H. Kim (2018)
Polyethylene-Carbon Composite (Velostat®) Based Tactile Sensor
Andrius Dzedzickis (2020)
A Geometrically Non-linear Stochastic Analysis of Two-dimensional Structures made of Neo-hookean Hyperelastic Materials Uusing MLPG Method: Considering Uncertainty in Mechanical Properties
M. H. Rad (2018)
Effects of Large Deformation and Velocity Impacts on the Mechanical Behavior of Filled Rubber: Microstructure-Based Constitutive Modeling and Mechanical Testing
Wei Wei (2020)
CMMSE 2017 – a numerical method based on genetic algorithms for the characterization of viscoelastic materials
J. R. Fernández (2020)
The Determination of Mechanical Properties of Prosthetic Liners Through Experimental and Constitutive Modelling Approaches
S. Łagan (2018)
Mechanical Influence of the Intervertebral Disc on the Vertebrae: A Finite Element Analysis
Eliane Tazelaar (2019)
Transversely Isotropic Hyperelastic Constitutive Model of Short Fiber Reinforced EPDM Based on Tensor Function
Q. Feng (2017)
Bionic research on spikes based on the tractive characteristics of ostrich foot toenail
R. Zhang (2020)
Mathematical Modeling and Virtual Reality Simulation of Surgical Tool Interactions with Soft Tissue: A Review and Prospective
K. Malukhin (2018)
See more
Semantic Scholar Logo Some data provided by SemanticScholar