Online citations, reference lists, and bibliographies.

Fatigue Performance Of Nitinol Round Wire With Varying Cold Work Reductions

Jeremy E. Schaffer, David L. Plumley
Published 2009 · Materials Science
Cite This
Download PDF
Analyze on Scholarcy
The role of cold work reduction and its effect on fatigue properties are examined by means of rotary beam fatigue testing. In this study, processing parameters from the initial ingot to the final size before finish drawing were held constant. Fatigue specimens were prepared with between 20 and 55% cold work in five percent increments. These samples were subsequently heat treated, cut into test sections at room temperature, and subjected to strain-controlled fatigue testing in a temperature-controlled RO water bath at a constant 10 °C above the measured active austenitic finish temperature (Af). An empirical analysis of the relationship between final reduction prior to heat treatment and fatigue lifetime is presented. Under alternating strain amplitudes greater than 1%, the 20 to 30% cold work level was found to deliver the greatest mean cycles to failure. Supplemental to the fatigue data, mechanocyclic and thermomechanical data are also presented as they evolve with prior retained cold work.
This paper references
In vitro biocompatibility assessment of a nickel-titanium alloy using electron microscopy in situ end-labeling (EM-ISEL).
Minass Assad (1998)
Tensile deformation of NiTi wires.
Ken Gall (2005)
Ability of Ni-containing biomedical alloys to activate monocytes and endothelial cells in vitro.
John C Wataha (1999)
Ability of NiContaining Biomedical Alloys to Activate Monocytes and Endothelial Cells In Vitro
J. C. Wataha
and M
D. Tolomeo (2001)
In situ TEM observation of two-step martensitic transformation in aged NiTi shape memory alloy
Lizhen Tan (2004)
A probabilistic approach to modeling microstructural variability and fatigue behavior in ASTM F 562 medical grade wire
Joerg Schaffer (2006)
Characterizing Fatigue Response of Nickel-Titanium Alloys by Rotary Beam Testing
Mitesh M. Patel (2007)
Fatigue-crack growth behavior in the superelastic and shape-memory alloy nitinol
A. L. Mckelvey (2001)
Effect of product form and heat treatment on the crystallographic texture of austenitic Nitinol
Scott W. Robertson (2006)
On the tensile and torsional properties of pseudoelastic NiTi
Peter H Adler (1990)
Diffuse Yield Drop and Snap Action in a NiTi Alloy, Materials Research Society Proceedings, Materials Research Society, Vol
T. W. Duerig (1992)
and G
T. Sawaguchi (2003)
Evolution of energy dissipation and the Young's modulus in a martensite NiTi shape memory alloy wire upon cyclic loading
Wei Min Huang (2003)
Analysis of the effects of surface treatments on nickel release from nitinol wires and their impact on candidate gene expression in endothelial cells
Emily McLucas (2008)
Situ TEM Observation of Two - Step Martensitic Transformation in Aged NiTi Shape Memory Alloy , Scripta Metall
W. C. Crone (2004)
Effects of Phase Transformations on Fatigue Endurance of a Superelastic NiTi Alloy
Ming Hsien Wu (2007)
Some unsolved aspects of Nitinol
Tom W. Duerig (2006)

This paper is referenced by
New nitinol endovascular stent-graft system for abdominal aortic aneurysm with finite element analysis and experimental verification
Xiaochen Zhou (2019)
Effect of Prestrain on the Fatigue Life of Superelastic Nitinol
Karthikeyan Senthilnathan (2019)
Effect of Annealing on Strain-Temperature Response under Constant Tensile Stress in Cold-Worked NiTi Thin Wire
Xiaojun Yan (2011)
Fatigue and Corrosion Fatigue of Cold Drawn WE43 Wires
Adam J. Griebel (2015)
Fatigue of NiTi SMA–pulley system using Taguchi and ANOVA
Jaronie Mohd Jani (2016)
A crystal plasticity-based study of the relationship between microstructure and ultra-high-cycle fatigue life in nickel titanium alloys
John Allen Moore (2016)
Inclusions Size-based Fatigue Life Prediction Model of NiTi Alloy for Biomedical Applications
Marco Urbano (2015)
Design optimisation of shape memory alloy linear actuator applications
Jaronie Mohd Jani (2016)
Evaluation of a production route for cold-drawn Nitinol wires
Sara Olsson (2016)
Laser Processing, Thermomechanical Processing, and Thermomechanical Fatigue of NiTi Shape Memory Alloys
Bradley C Panton (2016)
Analysis of New Nitinol Ingot Qualities
Rainer Steegmüller (2014)
A statistical approach to understand the role of inclusions on the fatigue resistance of superelastic Nitinol wire and tubing.
Scott W. Robertson (2015)
Effect of nonmetallic inclusions on fatigue properties of superelastic ti-ni fine wire
Fumiyoshi Yamashita (2019)
Shape memory alloy actuator design: CASMART collaborative best practices and case studies
Othmane Benafan (2014)
Influences of granular constraints and surface effects on the heterogeneity of elastic, superelastic, and plastic responses of polycrystalline shape memory alloys
Harshad M. Paranjape (2017)
Investigation on the Laser Based Actuation of Single way Trained SMA Sheet and their Application for the Development of Micro Positioning Stage
T. Surendra Nath (2015)
Development of a non-fusion scoliosis correction device : designing and testing
Michael R. Wessels (2012)
Fatigue performance of superelastic NiTi near stress-induced martensitic transformation
Eduardo Plaza Alarcón (2017)
Lüders-like band front motion and fatigue life of pseudoelastic polycrystalline NiTi shape memory alloy
Lin Zheng (2016)
Fatigue and fracture of wires and cables for biomedical applications
Janet L. Gbur (2016)
Recurrent Neural Network Dual Resistance Control of Multiple Memory Shape Memory Alloys
Igor Ruvinov (2018)
Effects of Lüders-like bands on NiTi fatigue behaviors
Lin Zheng (2016)
Design and Characterization of Self-Biasing NiTi Spring Actuator
Apratim Chakraborty (2016)
High compressive pre-strains reduce the bending fatigue life of nitinol wire.
Shikha Gupta (2015)
Semantic Scholar Logo Some data provided by SemanticScholar