Online citations, reference lists, and bibliographies.
← Back to Search

A Study On Flexural Properties Of Carbon-basalt/epoxy Hybrid Composites

I. A. Ary Subagia, Yonjig Kim
Published 2013 · Materials Science

Save to my Library
Download PDF
Analyze on Scholarcy Visualize in Litmaps
Reduce the time it takes to create your bibliography by a factor of 10 by using the world’s favourite reference manager
Time to take this seriously.
Get Citationsy
The objective of this research is to investigate the performances of the carbon-basalt/epoxy hybrid composites under flexural loading. In this work, the hybrid composites were manufactured by the vacuum assisted resin transfer molding (VARTM) process. The variations of flexural strength and modulus of the hybrid composite according to the number of basalt fabric were investigated, and we obtained the expression to calculate their mechanical properties. In the study of flexural properties for the hybrid composites with different stacking sequence of the reinforcements, we knew that their properties strongly depend on the reinforcing position of carbon and basalt fabric.
This paper references
Fiber-reinforced composites : materials, manufacturing, and design
R. L. King (1989)
Impact on Composite Structures
S. Abrate (1998)
Performance improvement of carbon fiber/polyethylene fiber hybrid composites
R. Park (1999)
Polymer Composite Materials Made from Carbon, Basalt, and Glass Fibres. Structure and Properties
S. Artemenko (2003)
Compressive Behavior of Hybrid Composites
C. S. Yerramalli (2003)
A comparative study of vacuum‐assisted resin transfer molding (VARTM) for sandwich panels
J. Dai (2003)
Basalt Fiber Reinforced Hybrid Polymer Composites
T. Czigany (2004)
Fiber-Reinforced Composites: Materials, Manufacturing, and Design, Third Edition
P. K. Mallick (2007)
Advanced mechanics of composite materials
V. Vasiliev (2007)
Effect of loading and lamination parameters on the optimum design of laminated plates
A. Assie (2011)
Mechanical characterisation of basalt fibre reinforced plastic
V. Lopresto (2011)
Mechanical behavior of basalt fiber-reinforced and basalt fiber metal laminate composites under tensile and bending loads
S. Khalili (2011)
Glass–basalt/epoxy hybrid composites for marine applications
V. Fiore (2011)
Flexural properties of hybrid composites reinforced by S-2 glass and T700S carbon fibres
Chensong Dong (2012)

This paper is referenced by
Experimental and analytical study on hybrid composite and its performance on column
Jency Sara Kurian (2021)
Investigation of flexural properties of fabricated hybrid fibres reinforced composites
K. Sharma (2021)
A review on different hybrid composites for aircraft structures
K. Raj (2021)
Numerical and experimental evaluation of the mechanical behavior of Kevlar/glass fiber reinforced epoxy hybrid composites
Muhammad Nabeel (2020)
Delamination Damages of Drilling Epoxy/Carbon/Basalt Fiber Reinforced Hybrid Composites Using Conventional Drill Machine
I. A. Subagia (2020)
Fast Fourier Transform (FFT) analysis on different inter-ply configurations of glass/basalt/aramid/carbon hybridized composites for aircraft structures
K. Raj (2020)
Multi-Layer Advanced Fibre Hybridisation (Glass-Carbon- Kevlar) and Variable Stiffness Influence on Composite Structure Responses (Stress and Deformation): An FE Approach
Pruthwiraj Sahu (2020)
Effect of glass powder as partial fine aggregate replacement on properties of basalt fibre reinforced concrete
M. Selvakumar (2020)
Effect of reinforcements and processing method on mechanical properties of glass and basalt epoxy composites
C. Raajeshkrishna (2020)
A study on the spreading characteristics of OCR lamination for flexible OLED
Y. Kim (2020)
The effect of two-step surface treatment by hydrogen peroxide and silanization of flax/cotton fabrics on epoxy-based laminates thermomechanical properties and structure
M. Barczewski (2020)
Two-body abrasive wear behavior of woven basalt fabric reinforced epoxy and polyester composites
C. Chairman (2020)
Non-medical medicine culture on Siwa Murti Bali School
Ni Putu Ayu Suryani (2020)
Investigation on mechanical properties and wear behaviour of chopped carbon-basalt epoxy hybrid composite
Akhil R Chandran (2019)
Basalt-based fiber-reinforced materials and structural applications in civil engineering
Elisabetta Monaldo (2019)
Hardness and wear rate of basalt/alumina/shellfish powder reinforced phenolic resin matrix hybrid composite brake lining pads
I. A. Atmika (2019)
Mechanical and Impact Damage Analysis on Carbon/Natural Fibers Hybrid Composites: A Review
C. Santulli (2019)
Influence of Fiber Stacking Sequence in Inter-ply Hybrid Composites Structures on the Mechanical and Dynamics Properties
M. Aydin (2018)
Mechanical Characterization of Glass-Basalt-Carbon/Polyester Hybrid Composites
M. S. El-Wazery (2018)
Flexural Progressive Failure of Carbon/Glass Interlayer and Intralayer Hybrid Composites
Qingtao Wang (2018)
Mechanical properties of epoxy/basalt polymer concrete: Experimental and analytical study
M. H. Niaki (2018)
Effect of basalt powder on mechanical properties and dynamic mechanical thermal analysis of hybrid epoxy composites reinforced with glass fiber
S. Babu (2018)
Mechanical properties of hybrid composites reinforced by carbon and basalt fibers
G. Sun (2018)
Applicability of gold tailings, waste limestone, red mud, and ferronickel slag for producing glass fibers
Youngjae Kim (2018)
An experimental investigation on mechanical properties of SiC particle and sisal fibre reinforced epoxy matrix composites
M. Kamaraj (2018)
Effect of basalt, silica sand and fly ash on the mechanical properties of quaternary polymer concretes
M. H. Niaki (2018)
Experimental study on the mechanical and thermal properties of basalt fiber and nanoclay reinforced polymer concrete
M. H. Niaki (2018)
Mechanical and Dynamic Properties of Hybrid Composite Laminates
N. M. Mohamed (2017)
Mechanical Properties of Glass Fiber / Basalt Fiber Reinforced Polypropylene Hybrid Composites Fabricated by the DFFIM Process
Yu Lichao (2017)
Study of the mechanical properties of hybrid composite basalt / alumina / shells for brake lining pads
I. A. Atmika (2017)
Tensile Strength Properties of Rice Husk-Rice Husk Ash Filled Plastic Drinking Bottle Waste HybridComposite with the Addition of Glycerol as Plasticizer
Maulida (2016)
A study on radial spreading of a resin droplet with varying viscosity under UV curing process
Kuendong Ha (2016)
See more
Semantic Scholar Logo Some data provided by SemanticScholar