Online citations, reference lists, and bibliographies.

Binder Jetting: A Review Of Process, Materials, And Methods

M. Ziaee, N. Crane
Published 2019 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
Abstract Binder Jet printing is an additive manufacturing technique that dispenses liquid binding agent on powder to form a two-dimensional pattern on a layer. The layers are stacked to build a physical article. Binder Jetting (BJ) can be adapted to almost any powder with high production rates and the BJ process utilizes a broad range of technologies including printing tehniques, powder deposition, dynamic binder/powder interaction, and post-processing methods. A wide variety of materials including polymers, metals, and ceramics have been processed successfully with Binder Jet. However, developing printing and post-processing methods that maximize part performance is a remaining challenge. This article presents a broad review of technologies and approaches that have been applied in Binder Jet printing and points towards opportunities for future advancement.
This paper references
10.1017/S0022112097005831
Formation and stability of liquid and molten beads on a solid surface
S. Schiaffino (1997)
10.1016/0017-9310(92)90080-C
Observations of droplet impingement on a ceramic porous surface
S. Chandra (1992)
10.1016/J.POWTEC.2016.09.079
Using micro-ct to investigate nanofluid droplet sorption in dry powder beds
Timothy Munuhe (2017)
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
I. Gibson (2009)
10.1533/9780857096234.1.133
Debinding and sintering of metal injection molding (MIM) components
S. Banerjee (2012)
10.1007/BF03403413
Binders for heap leaching agglomeration
K. Lewandowski (2009)
10.1016/J.JMAPRO.2009.03.002
A review of process development steps for new material systems in three dimensional printing (3DP)
Ben R. Utela (2008)
10.1002/jbm.b.33616
Effect of glycerol concentrations on the mechanical properties of additive manufactured porous calcium polyphosphate structures for bone substitute applications.
Esmat Sheydaeian (2017)
10.1111/j.1151-2916.1930.tb16222.x
THE PACKING OF PARTICLES1
A. Westman (1930)
Powder injection molding
R. German (1990)
10.1016/J.MATLET.2018.09.118
Ceramic binder jetting additive manufacturing: Particle coating for increasing powder sinterability and part strength
Wenchao Du (2019)
10.1016/J.POWTEC.2006.03.006
Agglomerate stability in fluidized beds of glass beads and silica sand
Sarah Weber (2006)
10.1108/13552540610707022
Improving Accuracy of Powder-Based Sff Processes by Metal Deposition from a Nanoparticle Dispersion
N. Crane (2006)
10.1016/J.JFOODENG.2017.06.008
Design and characterisation of food grade powders and inks for microstructure control using 3D printing
Sonia Holland (2018)
10.1007/S00170-010-2821-1
Effects of layer thickness and binder saturation level parameters on 3D printing process
M. Vaezi (2011)
10.1016/S0032-5910(97)03399-8
Description of agglomerate growth
S. Schaafsma (1998)
10.1016/J.MATDES.2018.02.018
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
H. Fayazfar (2018)
10.1016/J.MSEA.2006.01.059
Aqueous tape casting of yttria stabilized zirconia
M. Albano (2006)
10.1016/J.APSUSC.2015.02.033
Applicability of Cassie–Baxter equation for superhydrophobic fluoropolymer–silica composite films
U. Cengiz (2015)
10.1111/J.1551-2916.2005.00138.X
Viscosity and acoustic behavior of ceramic suspensions optimized for phase-change ink-jet printing
N. Reis (2005)
10.1098/rspa.1981.0002
An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface
C. Stow (1981)
10.1016/0921-5093(95)09785-6
Review: aqueous tape casting of ceramic powders
D. Hotza (1995)
10.1016/J.CES.2006.08.013
A DEM study of bubble formation in Group B fluidized beds with and without cohesive inter-particle forces
J. K. Pandit (2007)
10.1166/JCTN.2016.4842
A Generalized Cassie-Baxter Equation for Wetting Phenomena of Cylindrical Nano-Droplets on Heterogeneous Substrates
W. Xiao-song (2016)
10.1051/EPJCONF/201714006024
Numerical Analysis of the Effect of Particle Shape and Adhesion on the Segregation of Powder Mixtures
M. A. Behjani (2017)
10.1166/NNL.2015.1922
Wenzel to Cassie Transition in Superhydrophobic Randomly Rough Surfaces
F. Bottiglione (2015)
10.1111/IJAC.12316
Effect of Gray Scale Binder Levels on Additive Manufacturing of Porous Scaffolds with Heterogeneous Properties
M. Vlasea (2015)
10.1016/J.POWTEC.2011.09.007
Characterization of wet powder flowability by shear cell measurements and compaction curves
T. O. Althaus (2012)
10.1007/BF02644703
Carbide composition change during liquid phase sintering of a wear resistant alloy
P. Mcginn (1984)
10.1109/SICE.2006.314929
Strength and Processing Properties using a Photopolymer Resin in a Powder-based 3DP Process
Won-Hee Lee (2006)
10.1063/1.1741963
A Mass Spectrometric Study of Gaseous Species in the Al–Al2O3 System
R. Porter (1955)
10.1108/RPJ-11-2014-0149
Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process
H. Chen (2016)
10.1038/196885a0
Random Loose Packing of Binary Mixtures of Spheres
N. Epstein (1962)
10.1179/imtr.1984.29.1.249
Enhanced sintering treatments for ferrous powders
R. German (1984)
Binder stability and powder/binder interaction in three dimensional printing
J. Bredt (1995)
10.1007/s40962-018-0211-x
3D Printed Smart Molds for Sand Casting
J. Walker (2018)
10.1016/J.POWTEC.2008.03.005
A model for initial-stage sintering thermodynamics of an alumina powder
Y. Sarıkaya (2008)
10.1016/J.SCRIPTAMAT.2009.12.037
Maps of spreading during the initial stage of liquid-phase sintering
Q. Zheng (2010)
10.1023/A:1016532418920
Effects of residual carbon content on sintering shrinkage, microstructure and mechanical properties of injection molded 17-4 PH stainless steel
Yunxin Wu (2002)
10.1016/J.CERAMINT.2016.09.134
Low temperature sintering kinetics of BaO-0.15ZnO-4TiO2 dielectric ceramic in the presence of a liquid phase
Shuxin Duan (2017)
10.15781/T2DV1D80B
High green density ceramic components fabricated by the slurry-based 3DP process
Jason E. Grau (1997)
10.1111/j.1151-2916.1990.tb06506.x
Kinetic analysis of solution-precipitation during liquid-phase sintering of alumina
Ohhun Kwon (1990)
10.7449/2017MST/2017/MST_2017_248_255
Grain Growth and Densification Behavior of 316L Stainless Steel Metallic Components Produced via Binder Jet-Powder Printing (3-D) System Using Water Atomized Powders
H. Juan (2017)
10.1016/J.POWTEC.2014.09.021
Quantification of powder wetting by drop penetration time
Merel L.M. Oostveen (2015)
10.1016/0956-7151(91)90176-2
A theoretical analysis of solution-precipitation controlled densification during liquid phase sintering
Ohhun Kwon (1991)
10.1080/17452759.2017.1357319
Applications of non-destructive testing techniques for post-process control of additively manufactured parts
Q. Lu (2017)
Origin and control of anisotropy in three dimensional printing of structural ceramics
S. Khanuja (1996)
10.1088/0960-1317/25/8/084009
Perturbation-induced droplets for manipulating droplet structure and configuration in microfluidics
J. Li (2015)
High green density metal parts by vibrational compaction of dry powder in three dimensional printing process
Steven Joseph Gregorski (1996)
10.1007/978-94-009-0741-6_5
Sintering Crystalline Solids. II. Experimental Test of Diffusion Models in Powder Compacts
R. Coble (1961)
10.1016/J.POWTEC.2018.10.005
Packing density of mortar containing polypropylene, carbon or basalt fibres under dry and wet conditions
L. Li (2019)
10.1016/J.ADDMA.2019.03.004
Mechanical and material properties of castings produced via 3D printed molds
D. Snelling (2019)
10.1007/S10035-009-0126-6
On contact numbers in random rod packings
A. Wouterse (2009)
10.1016/J.IJRMHM.2012.02.017
Effects of sintering temperature on fine-grained tungsten heavy alloy produced by high-energy ball milling assisted spark plasma sintering
L. Ding (2012)
10.1111/JFPE.12648
Flow properties of coarse and fine sugar powders
Luana Cristina dos Santos (2018)
10.3901/JME.2008.08.157
Experiments and Numerical Simulations on Sintering Process of Metal Injection Molded Components
Jiupeng Song (2008)
10.1088/0957-4484/18/18/185701
Inkjet printable nanosilver suspensions for enhanced sintering quality in rapid manufacturing
J. Bai (2007)
10.1016/J.POWTEC.2018.02.032
Hydrophobic/hydrophilic static powder beds: Competing horizontal spreading and vertical imbibition mechanisms of a single droplet
Aquino L. Mundozah (2018)
10.1111/j.1151-2916.1970.tb15969.x
A General Model for the Intermediate Stage of Sintering
D. L. Johnson (1970)
10.1016/J.POWTEC.2016.08.039
Effect of mechanical alloying on the microstructure and properties of W–Ti alloys fabricated by spark plasma sintering
S. Wang (2016)
Strengthening porous metal skeletons by metal deposition from a nanoparticle dispersion
N. Crane (2005)
10.1166/JCTN.2015.4489
Generalized Cassie-Baxter Equation for Nanodroplet on Heterogeneous and Spherical Solid Substrates
Ai-jun Hu (2015)
10.1016/J.CERAMINT.2018.03.086
The effect of particle size of body components on the processing parameters of semi transparent porcelain
Fazilet Güngör (2018)
10.3139/9781569905838.002
2 – Characteristics of the Additive Manufacturing Process
A. Gebhardt (2016)
10.1016/J.PROCIR.2015.12.078
Compensating Warpage of 3D Printed Parts Using Free-form Deformation☆
Christoph Schmutzler (2016)
10.1126/SCIENCE.290.5499.2123
High-resolution inkjet printing of all-polymer transistor circuits.
H. Sirringhaus (2000)
10.1016/J.POWTEC.2013.01.062
Drop spreading and penetration into pre-wetted powders
J. Marston (2013)
10.1016/J.POWTEC.2018.09.029
Experimental study of the deformation and breakage of 3D printed agglomerates: Effects of packing density and inter-particle bond strength
Ruihuan Ge (2018)
10.1016/J.ADDMA.2018.02.014
Binder jetting of a complex-shaped metal partial denture framework
A. Mostafaei (2018)
LSD-based 3D printing of alumina ceramics
Andrea Zocca (2017)
10.3390/ma10070746
Amino Acids Aided Sintering for the Formation of Highly Porous FeAl Intermetallic Alloys
K. Karczewski (2017)
10.1007/S00170-018-1815-2
Additive manufacturing functionally graded titanium structures with selective closed cell layout and controlled morphology
Esmat Sheydaeian (2018)
The design of an automated powder deposition system for a three-dimensional printing machine
B. Pruitt (1991)
10.1017/S0022112080000110
Moving contact lines and rivulet instabilities. Part 1. The static rivulet
S. Davis (1980)
Mitigating Gas Defects in Castings Produced From 3D Printed Molds
D. Snelling (2013)
10.1108/RPJ-10-2016-0161
A review on additive manufacturing of sand molds by binder jetting and selective laser sintering
T. L. Néel (2018)
10.1088/1674-1056/24/11/116801
Theoretical analysis of droplet transition from Cassie to Wenzel state
L. Tian-qing (2015)
10.1103/PHYSREVE.86.011603
Wenzel and Cassie-Baxter states of an electrolytic drop on charged surfaces.
S. Das (2012)
10.1007/S11837-015-1296-9
Binder Jetting: A Novel Solid Oxide Fuel-Cell Fabrication Process and Evaluation
Guha Manogharan (2015)
10.1016/0168-3659(95)00173-5
Solid free-form fabrication of drug delivery devices
B. Wu (1996)
10.23919/ICEP.2017.7939340
Effect of size and shape of Ag particles for mechanical properties of sintered Ag joints evaluated by micro-compression test
C. Chen (2017)
10.1115/1.4036640
Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals
Y. Bai (2017)
10.1615/CRITREVTHERDRUGCARRIERSYST.V21.I6.10
Orally fast disintegrating tablets: developments, technologies, taste-masking and clinical studies.
Y. Fu (2004)
10.1063/1.1735155
Densification during Sintering in the Presence of a Liquid Phase. I. Theory
W. Kingery (1959)
10.1016/J.POWTEC.2016.12.094
Particle shape effects on fabric of granular random packing
Shiwei Zhao (2017)
Analysis of initial stage sintering through computer simulation
K. Hwang (1991)
10.1371/journal.pone.0108252
Effect of Layer Thickness and Printing Orientation on Mechanical Properties and Dimensional Accuracy of 3D Printed Porous Samples for Bone Tissue Engineering
A. Farzadi (2014)
10.1016/J.COLSURFA.2011.07.005
Effect of pattern size and geometry on the use of Cassie–Baxter equation for superhydrophobic surfaces
C. E. Cansoy (2011)
10.1111/j.1151-2916.1958.tb13519.x
Initial Sintering of Alumina and Hematite
R. Coble (1958)
10.1103/PhysRevA.27.1053
Random close packing of hard spheres and disks
J. Berryman (1983)
10.1016/J.JEURCERAMSOC.2013.08.013
Reactive sintering process and thermoelectric properties of boron rich boron carbides
Sven Roszeitis (2014)
10.1016/J.MINPRO.2004.01.007
Advancing contact angle of iron ores as a function of their hematite and goethite content: Implications for pelletising and sintering
S. Iveson (2004)
Three dimensional printing with fine metal powders
Peter R Baker (1997)
10.1016/J.COSSMS.2016.12.002
Powder bed binder jet 3D printing of Inconel 718: Densification, microstructural evolution and challenges☆
P. Nandwana (2017)
10.1016/j.actbio.2011.08.027
Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds.
A. Butscher (2012)
10.1016/J.APT.2018.06.012
Novel powder packing theory with bimodal particle size distribution-application in superalloy
Xianjue Ye (2018)
10.1016/J.CHROMA.2006.05.066
How does column packing microstructure affect column efficiency in liquid chromatography?
M. Schure (2006)
10.26153/TSW/3266
Slurry-Based 3DP and Fine Ceramic Components
M. Cima (2001)
10.1080/17452759.2013.838825
Additive manufacturing techniques for scaffold-based cartilage tissue engineering
A. Santos (2013)
10.1016/0032-5910(87)80133-X
Porosity calculations of ternary mixtures of particles
N. Standish (1987)
Sintering theory and practice
R. German (1996)
10.1016/J.JNONCRYSOL.2004.08.251
Alumina-doped silica gradient-index (GRIN) lenses by slurry-based three-dimensional printing (S-3DP™)
Hong-Ren Wang (2004)
10.1063/1.371321
Model of the primary rearrangement processes at liquid phase sintering and selective laser sintering due to biparticle interactions
L. Anestiev (1999)
10.1016/J.ADDMA.2019.02.018
Real-time process monitoring of core shifts during metal casting with wireless sensing and 3D sand printing
J. Walker (2019)
10.1016/j.jmatprotec.2018.10.037
Critical Influences of Particle Size and Adhesion on the Powder Layer Uniformity in Metal Additive Manufacturing
C. Meier (2018)
10.1016/J.NANOEN.2017.08.037
3D printing technologies for electrochemical energy storage
F. Zhang (2017)
10.1016/J.POWTEC.2005.04.032
Dry particle coating for improving the flowability of cohesive powders
J. Yang (2005)
10.1016/j.ijpharm.2011.12.012
Improvement of flow and bulk density of pharmaceutical powders using surface modification.
Laila J. Jallo (2012)
Progress and trends in ink-jet printing technology
H. P. Le (1998)
10.1115/1.4041624
Characterizing Binder–Powder Interaction in Binder Jetting Additive Manufacturing Via Sessile Drop Goniometry
Y. Bai (2019)
10.1016/1359-6454(95)00440-8
A model for liquid phase sintering
J. Svoboda (1996)
Energy analysis for transition from Cassie state to Wenzel state
C. Darong (2011)
10.1016/S0254-0584(99)00191-1
Optimisation of thermoelectric green tape characteristics made by the tape casting method
L. Salam (2000)
10.1016/J.IJRMHM.2006.02.002
Three-dimensional printing of tungsten carbide-10 wt% cobalt using a cobalt oxide precursor
B. Kernan (2007)
10.1108/RPJ-12-2014-0180
An exploration of binder jetting of copper
Y. Bai (2015)
10.1016/J.IJMULTIPHASEFLOW.2015.07.010
Micro-scale simulation of unidirectional capillary transport of wetting liquid through 3D fibrous porous media: Estimation of effective pore radii
Nikhil K. Palakurthi (2015)
10.1137/15M1038451
Modified Wenzel and Cassie Equations for Wetting on Rough Surfaces
X. Xu (2016)
10.1201/b15869-5
Liquid phase sintering
R. German (1985)
10.1016/j.jcis.2012.10.038
Modeling the granule formation mechanism from single drop impact on a powder bed.
H. Emady (2013)
10.1002/jbm.b.31610
Solid freeform fabrication and characterization of porous calcium polyphosphate structures for tissue engineering purposes.
Y. Shanjani (2010)
10.1016/0032-5910(85)85006-3
A thermodynamic approach to the packing of particle mixtures
A. Marmur (1985)
10.1111/j.1151-2916.1987.tb04900.x
Fluid flow model for ceramic tape casting
Y. Chou (1987)
10.1016/S0032-5910(05)80012-9
Computer simulation of random packings of spheres with log-normaldistributions
G. Nolan (1993)
10.1080/02533839.2010.9671604
Manufacturing parts optimization in the three‐dimensional printing process by the Taguchi method
Tsung Jung Hsu (2010)
10.1016/S0307-904X(98)10043-4
A numerical model for predicting bubble formation in a 3D fluidized bed
P. Witt (1998)
10.1007/S11837-016-1883-4
Binder Jetting: A Novel NdFeB Bonded Magnet Fabrication Process
M. Paranthaman (2016)
10.1016/S0010-4485(02)00122-7
A dithering algorithm for local composition control with three-dimensional printing
W. Cho (2003)
10.1016/J.CERAMINT.2016.03.079
Characterization of ceramic components fabricated using binder jetting additive manufacturing technology
J. A. González (2016)
10.1002/CJCE.20179
Improving flowability of cohesive particles by partial coating on the surfaces
C. Xu (2009)
Reducing powder bed layer defects in slurry-based three dimensional printing
P. C. Saxton (1999)
10.1115/1.4023230
Effect of Nanostructured Roughness on Evaporating Thin Films in Microchannels for Wenzel and Cassie–Baxter States
J. Zhao (2013)
10.1002/9780470314784.CH17
Fabrication and microstructural control of advanced ceramic components by three dimensional printing
J. Yoo (2008)
10.1179/003258909X12502679013819
Influence of injection moulding and sintering parameters on properties of 316L MIM compact
M. Huang (2011)
10.1002/ADMA.200300385
Inkjet Printing of Polymers: State of the Art and Future Developments
D. Gans (2004)
10.1007/S11465-018-0508-8
Process development for green part printing using binder jetting additive manufacturing
H. Miyanaji (2018)
10.1021/acs.chemrev.7b00074
Polymers for 3D Printing and Customized Additive Manufacturing
S. Ligon (2017)
10.1016/J.CERAMINT.2016.08.024
Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography
H. Wu (2016)
10.1063/1.1735156
Densification During Sintering in the Presence of a Liquid Phase. II. Experimental
W. D. Kingery (1959)
10.1111/J.1151-2916.1999.TB02046.X
Aetiology of defects in large ceramic moldings
S. Krug (2004)
10.1007/978-1-4899-5301-8_17
The Elementary Mechanisms of Liquid Phase Sintering
W. Huppmann (1980)
10.1016/J.POWTEC.2011.04.030
Granule formation mechanisms and morphology from single drop impact on powder beds
H. Emady (2011)
10.1108/RPJ-04-2018-0098
Empirical process model for shrinkage-induced warpage in 3D printing
Christoph Schmutzler (2019)
10.2352/J.IMAGINGSCI.TECHNOL.(2008)52:5(051004)
Three-Dimensional Ink Jet Prints—Impact of Infiltrants
B. Lozo (2008)
10.1023/A:1004600816317
Solid state sintering of ceramics: pore microstructure models, densification equations and applications
J. Shi (1999)
Three dimensional printing by vector printing of fine metal powders
K. Seluga (2001)
10.1016/J.CES.2016.02.017
Lattice Boltzmann study on the dynamics of successive droplets impact on a solid surface
K. A. Raman (2016)
10.1364/AO.18.002732
Optical properties of waveguides made by a porous glass process.
J. Simmons (1979)
10.1115/IMECE2017-70344
Binder Jetting Additive Manufacturing of Ceramics: A Literature Review
Wenchao Du (2017)
10.1016/J.JEURCERAMSOC.2007.01.005
Drying stress of yttria-stabilized-zirconia slurry on a metal substrate
Weihua Lan (2007)
10.1002/JBM.B.30469
Three-dimensional printing of porous polyethylene structure using water-based binders.
J. Suwanprateeb (2006)
10.1016/J.JALLCOM.2016.03.270
Effect of starting powder particle size and heating rate on spark plasma sintering of Fe Ni alloys
M. Shongwe (2016)
10.1007/S11661-004-0375-2
Densification of a powder-metal skeleton by transient liquid-phase infiltration
A. Lorenz (2004)
10.1016/J.ACTAMAT.2018.05.047
Sintering regimes and resulting microstructure and properties of binder jet 3D printed Ni-Mn-Ga magnetic shape memory alloys
A. Mostafaei (2018)
10.1038/nature06932
The missing memristor found
D. Strukov (2008)
10.1016/J.CES.2016.07.015
Three-dimensional simulation of micrometer-sized droplet impact and penetration into the powder bed
Hua Tan (2016)
10.1016/J.MATDES.2018.06.009
3D printing high density ceramics using binder jetting with nanoparticle densifiers
Pragnya Kunchala (2018)
Color and permanence issues in 3D ink-jet printing
M. Stanić (2010)
Impact of an ink drop on paper
A. Asai (1993)
10.1007/S10853-009-3411-1
Effects of curing time and temperature on strength development of inorganic polymeric binder based on natural pozzolan
Ebrahim Najafi Kani (2009)
10.1021/ie50261a017
Grading Aggregates - I. - Mathematical Relations for Beds of Broken Solids of Maximum Density
C. Furnas
10.1016/J.MATDES.2018.11.051
Effect of powder size distribution on densification and microstructural evolution of binder-jet 3D-printed alloy 625
A. Mostafaei (2019)
10.1016/J.MSEA.2008.11.012
Fabrication and characterization of ultra-fine grained tungsten by resistance sintering under ultra-high pressure
Zhangjian Zhou (2009)
10.1007/s11665-017-2747-y
Additive Manufacturing of Metallic Materials: A Review
Y. Zhang (2017)
10.1016/J.MATDES.2019.107683
Additive manufacturing of magnesium–zinc–zirconium (ZK) alloys via capillary-mediated binderless three-dimensional printing
M. Salehi (2019)
10.1016/J.JEURCERAMSOC.2018.03.014
3D printing of porcelain by layerwise slurry deposition
P. Lima (2018)
Sintering: Densification, Grain Growth and Microstructure
S. L. Kang (2005)
10.1002/pen.760302009
Three‐dimensional finite element simulation of thermoforming
H. F. Nied (1990)
10.2109/JCERSJ.114.823
Effects of Slurry Properties on the Crack Formation in Ceramic Green Sheets during Drying
T. Mori (2006)
10.1002/ADEM.201400097
Additive Manufacturing of Ceramic‐Based Materials
N. Travitzky (2014)
10.1179/096797899680633
Freeform fabrication of ceramics
J. Halloran (1999)
10.1016/S0167-6636(97)00034-3
A network model for initial stage sintering
F. Parhami (1998)
Layer to layer registration of a slurry-based 3D printing machine
K. Seluga (2000)
10.1016/j.ejpb.2014.12.003
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets.
Á. Goyanes (2015)
10.1108/RPJ-03-2018-0069
Effect of powder characteristics on parts fabricated via binder jetting process
H. Miyanaji (2019)
10.1109/TMTT.2017.2730839
Ka-Band Characterization of Binder Jetting for 3-D Printing of Metallic Rectangular Waveguide Circuits and Antennas
E. Rojas-Nastrucci (2017)
10.1016/S0955-2219(98)00165-4
Comparison of different binders for water-based tape casting of alumina
A. Kristoffersson (1998)
10.2109/jcersj.97.584
Initial Stage Sintering of Spherical Silica
Y. Azuma (1989)
10.1016/J.ADDMA.2018.10.015
Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing
I. Rishmawi (2018)
10.1016/J.JALLCOM.2013.04.042
Microstructural and mechanical characterization of injection molded 718 superalloy powders
Ö. Özgün (2013)
10.1039/C2JM30566F
3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis
C. Wu (2012)
10.4229/24THEUPVSEC2009-1BO.8.1
Microscale PV Cells for Concentrated PV Applications
V. Gupta (2009)
10.1016/S0955-2219(01)00259-X
Differential sintering in ceramic injection moulding: particle orientation effects
S. Krug (2002)
10.1016/J.POWTEC.2017.01.006
Characterization of a downer reactor for particle rounding
M. Sachs (2017)
10.1016/J.JMST.2016.08.011
Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication†
L. E. Murr (2016)
10.1021/la7029938
Drops on microstructured surfaces coated with hydrophilic polymers: Wenzel's model and beyond.
Christian Dorrer (2008)
10.1111/J.1151-2916.2002.TB00168.X
Ink-jet printing of binders for ceramic components
J. Moon (2004)
10.1002/adma.201502092
High-Resolution Printing of 3D Structures Using an Electrohydrodynamic Inkjet with Multiple Functional Inks.
B. W. An (2015)
10.1088/1361-6528/aad0bb
The effect of inkjetted nanoparticles on metal part properties in binder jetting additive manufacturing.
Y. Bai (2018)
10.1108/13552540910925063
Development of translucent and strong three dimensional printing models
J. Suwanprateeb (2009)
10.1007/978-94-017-0546-2
The Science and Engineering of Granulation Processes
J. Litster (2004)
10.1063/1.342663
Nozzleless droplet formation with focused acoustic beams
S. Elrod (1989)
10.1111/j.1151-2916.1956.tb15624.x
Cermets: I, Fundamental Concepts Related to Micro‐structure and Physical Properties of Cermet Systems
M. Humenik (1956)
10.1080/09205063.2018.1475096
Three dimensionally printed pearl powder/poly-caprolactone composite scaffolds for bone regeneration**
X. Zhang (2018)
10.1016/J.APSUSC.2013.03.101
Comparison of static contact angle of various metal foams and porous copper fiber sintered sheet
Chunjian Zhang (2013)
10.1016/j.carbpol.2018.07.064
Selective recrystallization of cellulose composite powders and microstructure creation through 3D binder jetting.
Sonia Holland (2018)
10.1021/la101296e
Formation and stability of lines produced by inkjet printing.
J. Stringer (2010)
10.1007/S11837-016-2177-6
Binder-Jet Printing of Fine Stainless Steel Powder with Varied Final Density
M. Ziaee (2017)
10.1016/J.POWTEC.2014.07.046
Processing fine powders by roll press
V. Esnault (2015)
10.1109/TCPMT.2016.2646386
Development of a Wideband and High-Efficiency Waveguide-Based Compact Antenna Radiator With Binder-Jetting Technique
Guan-Long Huang (2017)
10.1006/JCIS.2001.8117
Surface adsorption effects in the inkjet printing of an aqueous polymer solution on a porous oxide ceramic substrate.
R. K. Holman (2002)
10.1111/j.1151-2916.1965.tb14708.x
Vibratory Compaction: I, Compaction of Spherical Shapes
J. E. Ayer (1965)
10.1016/J.POWTEC.2010.05.012
Experimental study of liquid drop impact onto a powder surface
J. Marston (2010)
10.1080/14786430500318860
Modelling of the influence of dihedral angle, volume fractions, particle size and coordination on the driving forces for sintering of dual phase systems
F. Delannay (2005)
10.1016/J.POWTEC.2010.07.022
Wetting, disintegration and dissolution of agglomerated water soluble powders
L. Forny (2011)
10.1007/978-3-319-90755-0_3
Binder Jet Printing in Pharmaceutical Manufacturing
S. Trenfield (2018)
10.1179/pom.1985.28.3.145
Present State of Liquid Phase Sintering
W. Kaysser (1985)
Fabrication of engineered ceramic components by the slurry-based three dimensional printing process
Jason E. Grau (1998)
10.1108/13552549510104447
Layer position accuracy in powder‐based rapid prototyping
S. Lee (1995)
10.1016/0955-2219(95)00001-B
The packing density of binary powder mixtures
J. Zheng (1995)
10.1021/ac200424p
Influence of the particle size distribution on hydraulic permeability and eddy dispersion in bulk packings.
A. Daneyko (2011)
10.1088/1468-6996/16/3/033502
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
S. Shirazi (2015)
10.1007/S11661-000-0276-Y
The effect of gravity on solution-reprecipitation during liquid phase sintering
C. S. Marchi (2000)
10.1007/S00170-015-7482-7
An experimental investigation into the dimensional error of powder-binder three-dimensional printing
M. N. Islam (2016)
10.1002/PI.3006
Evaluation of heat treatment regimes and their influences on the properties of powder‐printed high‐density polyethylene bone implant
J. Suwanprateeb (2011)
10.1108/13552540710750898
3D Printing technique applied to Rapid Casting
E. Bassoli (2007)
10.1016/J.JMAPRO.2017.07.017
3D printing for rapid sand casting—A review
M. Upadhyay (2017)
Droplet-powder impact interaction in three dimensional printing
Tailin Fan (1996)
Vector drop-on-demand production of tungsten carbide-cobalt tooling inserts by three dimensional printing
David Guo (2004)
10.1016/J.POWTEC.2011.06.008
Applying dry powder coatings to pharmaceutical powders using a comil for improving powder flow and bulk density
M. P. Mullarney (2011)
10.1007/S11837-016-2231-4
Optimization of Binder Jetting Using Taguchi Method
S. Shrestha (2017)
10.1073/pnas.0902027106
Coexistence and transition between Cassie and Wenzel state on pillared hydrophobic surface
Takahiro Koishi (2009)
10.1016/J.IJMACHTOOLS.2017.09.001
A new physics-based model for equilibrium saturation determination in binder jetting additive manufacturing process
H. Miyanaji (2018)
10.1115/1.3123324
Numerical Simulation of Random Packing of Spherical Particles for Powder-Based Additive Manufacturing
J. Zhou (2009)
10.1108/RPJ-09-2015-0128
A review of additive manufacturing for ceramic production
E. Costa (2017)
10.1002/app.1995.070551106
Application of poly(vinyl alcohol) with an alkyl end group containing anionic groups to coal–water slurry as a dispersant
J. Yamauchi (1995)
10.1016/J.POWTEC.2015.10.035
Particle-based simulation of powder application in additive manufacturing
E. J. Parteli (2016)
10.1016/J.COMPOSITESB.2017.11.035
A new approach for fabrication of titanium-titanium boride periodic composite via additive manufacturing and pressure-less sintering
Esmat Sheydaeian (2018)
Lightweight metal cellular structures via indirect 3D printing and casting
N. Meisel (2012)
10.1080/24725854.2018.1478169
Layer-wise spatial modeling of porosity in additive manufacturing
J. Liu (2019)
10.1016/J.POWTEC.2018.01.033
Impact of hydrophobic surfaces on capillary wetting
J. Kammerhofer (2018)
A Comparison of Binder Burnout and Mechanical Characteristics of Printed and Chemically Bonded Sand Molds
D. Snelling (2014)
10.1016/j.msec.2014.01.027
Printability of calcium phosphate: calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique.
Zuoxin Zhou (2014)
10.1016/J.JCIS.2004.02.033
Capillary imbibition of surfactant solutions in porous media and thin capillaries: partial wetting case.
V. Starov (2004)
10.1002/AIC.690480902
Small‐scale free surface flows with breakup: Drop formation and emerging applications
O. Basaran (2002)
10.1007/S10853-008-3008-0
Review: liquid phase sintering
R. German (2009)
10.1088/1757-899X/140/1/012023
Fabrication of porous silicon nitride ceramics using binder jetting technology
L. Rabinskiy (2016)
Integration of binder jet additive manufacturing technology into the metal casting industry
P. Lynch (2017)
10.1016/j.actbio.2014.09.008
Porous magnesium/PLGA composite scaffolds for enhanced bone regeneration following tooth extraction.
A. Brown (2015)
10.1016/J.JEURCERAMSOC.2016.03.028
Transient liquid phase spark plasma sintering of B4C-based ceramics using Ti-Al intermetallics as sintering aid
W. Ji (2016)
10.1038/ncomms7858
Accelerated sintering in phase-separating nanostructured alloys
Mansoo Park (2015)
10.1016/J.PROCIR.2016.02.358
Microstructural and Mechanical Characterization of Mo-containing Stellite Alloys Produced by three Dimensional Printing
P. Stoyanov (2016)
10.1023/B:JECR.0000015662.85301.DE
Influence of Liquid Phase Additives on Structural and Sintering Behaviour of Samarium Modified Lead Titanate Ceramics
Sarabjit Singh (2003)
10.1016/J.JMATPROTEC.2015.01.016
Experimental and theoretical investigation on ultra-thin powder layering in three dimensional printing (3DP) by a novel double-smoothing mechanism
S. Cao (2015)
10.1016/J.PROMFG.2015.09.057
A Review on 3D Printing for Customized Food Fabrication
J. Sun (2015)
10.1016/J.CARBON.2017.04.028
Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes
A. Azhari (2017)
10.1016/J.CES.2009.08.038
Drop penetration time in heterogeneous powder beds
T. T. Nguyen (2009)
10.1016/J.ADDMA.2017.12.008
Effect of printing speed on quality of printed parts in Binder Jetting Process
H. Miyanaji (2018)
10.3390/ma11040535
The Design of 3D-Printed Lattice-Reinforced Thickness-Varying Shell Molds for Castings
Haolong Shangguan (2018)
10.1016/J.PROMFG.2016.08.074
Optimal Process Parameters for 3D Printing of Porcelain Structures
H. Miyanaji (2016)
10.1007/s10853-015-9050-9
Binder droplet impact mechanism on a hydroxyapatite microsphere surface in 3D printing of bone scaffolds
Yanen Wang (2015)
10.1086/624388
Experimental Study of the Porosity and Permeability of Clastic Sediments
H. Fraser
10.1016/S0032-5910(98)00223-X
The packing density of `perfect' binary mixtures
S.M.K. Rassouly (1999)
Method for measuring water diffusion in a coating applied to a substrate
T. Nguyễn (1995)
10.1179/0032589915Z.000000000255
3D screen printing for the fabrication of small intricate Ti-6Al-4V parts
M. Jurisch (2015)
10.1115/IMECE2012-89895
Micro-Scale Part Manipulation on a Liquid Interface Through Interface Curvature Effects
J. Carballo (2012)
10.1016/B0-08-042993-9/00019-X
Melt infiltration of metal matrix composites
A. Mortensen (2000)
10.1007/BF02646216
Capillary forces between spheres during agglomeration and liquid phase sintering
K. Hwang (1987)
10.1021/la7026847
Inkjet-printed line morphologies and temperature control of the coffee ring effect.
D. Soltman (2008)
10.1002/PEN.11251
Production of injection molding tooling with conformal cooling channels using the three dimensional printing process
E. Sachs (2000)
10.1063/1.5007513
Numerical study of the random packings structure of solid metal powder particles
O. Kovalev (2017)
10.1002/ADEM.201600743
Powder Metallurgy Strategies to Improve Properties and Processing of Titanium Alloys: A Review
A. Hidalgo (2017)
10.4028/www.scientific.net/MSF.546-549.611
Effect of Mg Content in Matrix on Infiltration Height in Producing MgO/Al Composite by Vacuum Infiltration Method
R. Çalin (2007)
10.1111/j.1151-2916.1970.tb12142.x
Analysis of Capillary Forces in Liquid‐Phase Sintering of Jagged Particles
J. W. Cahn (1970)
10.1016/J.CHERD.2016.03.020
An overview of the role of capillary condensation in wet caking of powders
Z. Afrassiabian (2016)
Densification of Metal Powders During Sintering
V. A. Invenson (1995)
10.1016/J.POWTEC.2007.12.017
3DP process for fine mesh structure printing
K. Lu (2008)
10.1007/S11661-005-0278-X
Homogeneous steel infiltration
B. Kernan (2005)
10.1179/095066003225010263
Solid freeform fabrication of ceramics
B. Y. Tay (1996)
10.1016/J.POWTEC.2018.06.008
A nonlinear packing model for multi-sized particle mixtures
C. Chang (2018)
10.1002/cjce.5450460305
The effect of particle size distribution on packing density
H. Sohn (1968)
10.1016/J.CERAMINT.2015.01.108
Fabrication of barium titanate by binder jetting additive manufacturing technology
S. Gaytan (2015)
10.1016/0032-5910(92)88021-9
Computer simulation of random packing of hard spheres
G. Nolan (1992)
10.1016/0032-5910(93)02789-D
The size distribution of interstices in random packings of spheres
G. Nolan (1994)
10.1007/S40032-014-0139-8
Mathematical Modeling of Surface Roughness of Castings Produced Using ZCast Direct Metal Casting
Munish Chhabra (2015)
10.1016/j.chroma.2011.09.039
From random sphere packings to regular pillar arrays: effect of the macroscopic confinement on hydrodynamic dispersion.
A. Daneyko (2011)
10.1108/RPJ-12-2013-0123
Conceptual design of three-dimensional scaffolds of powder-based materials for bone tissue engineering applications
Ramakrishna Vasireddi (2015)
10.1111/j.2042-7158.1958.tb10392.x
The flow properties of powders under humid conditions.
D. Craik (1958)
10.1063/1.1736107
Sintering Crystalline Solids. I. Intermediate and Final State Diffusion Models
R. Coble (1961)
10.1016/J.PROMFG.2015.09.016
Effect of Layer Thickness and Orientation on Mechanical Behavior of Binder Jet Stainless Steel 420 + Bronze Parts
M. Doyle (2015)
10.4028/www.scientific.net/SSP.281.723
Preparation and Properties of Cr,Nd:YAG Transparent Ceramics by Slip Casting
X. Wan (2018)
10.1163/156856298X00451
Integration of surface modification and 3D fabrication techniques to prepare patterned poly(L-lactide) substrates allowing regionally selective cell adhesion.
A. Park (1998)
10.1108/RPJ-03-2017-0048
A review on quality control in additive manufacturing
H. Kim (2018)
10.1016/J.APT.2010.11.005
Powder deposition in three parallel-oriented dies of cylindrical and E shapes
X. Xie (2012)
10.1016/0036-9748(75)90250-1
Modelling of rearrangement processes in liquid phase sintering
W. Huppmann (1975)
10.1023/A:1008621020555
A Review of Ceramic Sintering and Suggestions on Reducing Sintering Temperatures
X. Kuang (1997)
10.1103/physrevlett.94.198001
Experiments on random packings of ellipsoids.
W. Man (2005)
10.1115/MSEC2018-6651
Model Guided Mixing of Ceramic Powders With Graded Particle Sizes in Binder Jetting Additive Manufacturing
Wenchao Du (2018)
10.1016/J.ACTAMAT.2018.11.061
A paradigm shift towards compositionally zero-sum binderless 3D printing of magnesium alloys via capillary-mediated bridging
M. Salehi (2019)
10.1117/12.22553
Graded index materials by the sol-gel process
M. Yamane (1990)
10.1016/J.PROCIR.2014.06.030
Energy and Material Flow Analysis of Binder-jetting Additive Manufacturing Processes
Simon Meteyer (2014)
10.1111/J.1151-2916.2000.TB01693.X
Densification Behaviors of Fine‐Alumina and Coarse‐Alumina Compacts during Liquid‐Phase Sintering with the Addition of Talc
Ho-Yang Kim (2000)
10.1007/BF03338181
Activated and Liquid-Phase Sintering—Progress and Problems
P. E. Zovas (1983)
10.1016/S0928-4931(02)00012-7
Scaffold development using 3D printing with a starch-based polymer
C. X. F. Lam (2002)
10.1016/J.MATDES.2018.03.027
Binder jetting additive manufacturing with a particle-free metal ink as a binder precursor
Y. Bai (2018)
10.1002/1527-2648(200103)3:3<158::AID-ADEM158>3.0.CO;2-S
Continuum Mechanical Description of Sintering Nanocrystalline Zirconia
J. Kanters (2001)
10.1038/207835a0
Dense Random Packing of Binary Mixtures of Spheres
S. Yerazunis (1965)
10.1007/978-94-011-0531-6_5
The principles of tape casting and tape casting applications
R. Mistler (1995)
10.1016/J.MATDES.2018.06.038
Sinter structure analysis of titanium structures fabricated via binder jetting additive manufacturing
Evan Wheat (2018)
10.1007/S00170-018-1697-3
Dynamic simulation of powder packing structure for powder bed additive manufacturing
Yousub Lee (2018)
10.1108/13552541311292718
Characterization and evaluation of a PMMA‐based 3D printing process
C. Polzin (2013)
10.2352/J.IMAGINGSCI.TECHNOL.2009.53.5.050305
Lifetime Improvement for Full-Width-Array Piezo Ink Jet Print Head Using Matrix Nozzle Arrangement
S. Seto (2009)
10.1016/S0921-5093(03)00578-1
Processing techniques for functionally graded materials
B. Kieback (2003)
10.1006/JCIS.2002.8527
Drop penetration into porous powder beds.
K. Hapgood (2002)
10.1080/10426910902997571
Comparative Study of 3D Printing Technologies for Rapid Casting of Aluminium Alloy
S. S. Gill (2009)
10.1016/J.JMATPROTEC.2017.05.010
3D-printed shell-truss sand mold for aluminum castings
Haolong Shangguan (2017)
10.4028/www.scientific.net/KEM.326-328.151
A Study on Reduction of Processing Time and Improvement of Strength by Using Photopolymer Resin in the 3DP Process
W. Lee (2006)
10.15781/T28S4K62P
Structural Ceramic Components by 3D Printing
J. Yoo (1993)
EFFECT OF POLYMERIC BINDER AND DISPERSANT ON THE STABILITY OF COLLOIDAL ALUMINA SUSPENSIONS
H. Karimian (2006)
10.1155/2016/9181254
Subsurface Geobody Imaging Using CMY Color Blending with Seismic Attributes
Jianhua Cao (2016)
10.1108/13552540310477463
Improved surface finish in 3D printing using bimodal powder distribution
M. Lanzetta (2003)
10.4028/www.scientific.net/AMM.401-403.180
Image Transformation for Digital Printing Machine
F. Yin (2013)
10.1007/978-3-642-12281-1_2
Gel-Tape-Casting of Ceramic Substrates
Y. Huang (2010)
10.1016/S0955-2219(02)00009-2
Effect of particle size distribution on sintering of agglomerate-free submicron alumina powder compacts
J. Ma (2002)
10.1007/s10439-016-1678-3
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
R. Trombetta (2016)
10.1038/s41598-019-38862-7
Real time observation of binder jetting printing process using high-speed X-ray imaging
N. Parab (2019)
10.1111/j.1151-2916.1989.tb07662.x
Liquid-Phase Sintering of Aluminum Nitride by Europium Oxide Additives
N. Vandamme (1989)
10.1115/1.2900701
Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
E. Sachs (1992)
Slurry-based powder beds for the selective laser sintering of silicate ceramics
T. Mühler (2015)
10.1002/9780470339718.CH1
Slurry Characterization by Stress Relaxation Test for Tape Casting Process
T. Mori (2009)
10.1016/J.JMATPROTEC.2004.04.292
Defects and prevention in ceramic components fabricated by inkjet printing
J. H. Song (2004)
10.1016/J.MATDES.2017.01.024
Additive manufacturing of complex-shaped graded TiC/steel composites
A. Levy (2017)
10.1016/J.PROMFG.2017.07.084
Effects of Hot Isostatic Pressing on Copper Parts Fabricated via Binder Jetting
Ashwath Yegyan Kumar (2017)
10.3844/AJEASSP.2016.128.133
Infiltration of Nanoparticles into Porous Binder Jet Printed Parts
A. Elliott (2016)
10.1016/J.CES.2008.04.040
Phenomenological study and modelling of wick debinding
I. M. Somasundram (2008)
10.1016/J.POWTEC.2011.11.013
Development of vibration shear tube method for powder flowability evaluation
M. I. Zainuddin (2012)
10.1016/j.dib.2016.11.078
Data on the densification during sintering of binder jet printed samples made from water- and gas-atomized alloy 625 powders
A. Mostafaei (2017)
10.1039/C6RA23805J
Polymeric binder based on PAA and conductive PANI for high performance silicon-based anodes
Kukjoo Lee (2016)
10.1007/S11661-007-9153-2
The Effect of Particle Shape on the Sintering of Aluminum
Z. Liu (2007)
10.1016/J.IJMACHTOOLS.2017.04.006
Process development toward full-density stainless steel parts with binder jetting printing
T. Do (2017)
10.1109/IROS.2009.5354714
Achieving three-dimensional automated micromanipulation at the scale of several micrometers with a nanotip gripper
H. Xie (2009)
Microstructural control during three dimensional printing of polymeric medical devices
B. Wu (1998)
10.1007/S00170-018-1783-6
3D-printed rib-enforced shell sand mold for aluminum castings
Haolong Shangguan (2018)
10.1016/0921-5093(92)90028-Y
Experimental size ratio and compositional effects on the packing and hot isostatic pressing of spherical powders
E. Li (1992)
10.1016/J.PROMFG.2018.02.166
Influence of Binder Quantity on Dimensional Accuracy and Resilience in 3D-Printing
Markus Kafara (2018)
10.1038/239504a0
Random Packing of Equal and Unequal Spheres in Two and Three Dimensions
W. Visscher (1972)
10.1111/IJAC.13100
Study on the sintering behavior and characterization of the IGZO ceramics by slip casting
Y. Liu (2019)
10.1016/J.JEURCERAMSOC.2008.03.004
Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure
B. Cappi (2008)
10.1111/j.1151-2916.1990.tb06523.x
Method for Processing Metal-Reinforced Ceramic Composites
F. Lange (1990)
10.1016/S1005-0302(11)60107-2
Dislocation Behavior in ZrC Particles during Elevated Temperature Compressive Deformation of a 30 vol.% ZrCp/W Composite
Taiquan Zhang (2011)
10.1115/MSEC2018-6681
Additively Manufactured Full-Density Stainless Steel 316L With Binder Jet Printing
T. Do (2018)
10.1016/j.biomaterials.2014.01.064
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration.
J. Inzana (2014)
10.1016/S0955-2219(00)00120-5
Residual stresses and cracking in large ceramic injection mouldings subjected to different solidification schedules
S. Krug (2000)
10.1142/S021798491850272X
Simulation and experimental study of binder droplet infiltration in 3DP technology
Y. Wang (2018)



This paper is referenced by
10.1101/2020.05.27.118562
Searching for biological feedstock material: 3D printing of wood particles from house borer and drywood termite frass
Rudy Plarre (2020)
10.1016/j.apmt.2020.100689
On the environmental impacts of 3D printing technology
Mohammad Reza Khosravani (2020)
10.1002/fuce.201900164
Accelerating Fuel Cell Development with Additive Manufacturing Technologies: State of the Art, Opportunities and Challenges
X. Y. Tai (2019)
10.1016/j.addma.2020.101127
Impact of part thickness and drying conditions on saturation limits in binder jet additive manufacturing
Nathan B. Crane (2020)
10.1002/adma.202000556
Evolution of 3D Printing Methods and Materials for Electrochemical Energy Storage.
Vladimir K. Egorov (2020)
10.1002/advs.201902307
Multi‐Material 3D and 4D Printing: A Survey
Mohammad Rafiee (2020)
10.3390/ma13102406
Current Status and Prospects of Polymer Powder 3D Printing Technologies
Yue Wang (2020)
10.1016/j.addma.2020.101266
The combined influence of elevated pre-sintering and subsequent bronze infiltration on the microstructures and mechanical properties of 420 stainless steel additively manufactured via binder jet printing
S. L. Lu (2020)
10.1016/j.addma.2020.101341
An in-situ crosslinking binder for binder jet additive manufacturing
Dustin Gilmer (2020)
10.1016/j.addma.2019.100960
Binder Jetting Additive Manufacturing of Copper Foam Structures
Hadi Miyanaji (2020)
10.1016/j.addma.2020.101245
Numerical study of the effect of progressive solidification on residual stress in single-bead-on-plate additive manufacturing
Kyeongsik Ha (2020)
10.3390/met10050686
Development of AM Technologies for Metals in the Sector of Medical Implants
Irene Buj-Corral (2020)
10.1016/j.matpr.2019.12.012
Additive manufacturing: A review on 3 D printing of metals and study of residual stress, buckling load capacity of strut members
Pritam Anant Pidge (2020)
10.3390/jmmp3030082
A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel
S. Mirzababaei (2019)
10.1115/1.4046248
Ceramic Binder Jetting Additive Manufacturing: A Literature Review on Density
W. Du (2020)
10.1016/J.COFS.2020.01.009
Recent advances and future perspective in additive manufacturing of foods based on 3D printing
Alain Le-Bail (2020)
Semantic Scholar Logo Some data provided by SemanticScholar