Online citations, reference lists, and bibliographies.
← Back to Search

Rheology Of Fiber-reinforced Cementitious Materials

K. Kuder, N. Ozyurt, Edward B. Mu, S. Shah
Published 2007 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
An improved understanding of the influence of fibers on the rheology of cementitious systems is needed so that fiber reinforcement can be used effectively. However, conventional rheometers are not suitable for testing stiff fiber-reinforced materials. In this study, a parallel plate rheometer that is capable of evaluating the rheology of stiff fiber-reinforced cement paste and mortar systems was designed and built. The governing equations for the rheometer were derived and experimental procedures were developed that yielded reproducible results. A comparative analysis of the custom-built parallel plate rheometer, a commercial rheometer and the values reported in the literature, indicated that the measurements obtained using the rheometer were reasonable. The rheometer was then used to evaluate the rheology of a variety of cement paste systems, including stiff steel fiber-reinforced cement pastes.
This paper references
10.1038/scientificamerican10021920-326
in Civil Engineering
L. Ángeles (1996)
THE RHEOLOGY OF FRESH CEMENT AND CONCRETE - A REVIEW
P. F. G. Banfill (2003)
10.1007/BF02481066
Applicability of rheological models to high-performance grouts containing supplementary cementitious materials and viscosity enhancing admixture
A. Yahia (2003)
10.14359/12220
Permeability of Cracked Hybrid Fiber-Reinforced Mortar under Load
J. Lawler (2002)
10.14359/13119
Drying shrinkage of concrete reinforced with fibers and welded-wire fabric
T. Voigt (2004)
10.1061/(ASCE)0733-9445(1983)109:7(1727)
Properties of Concrete Subjected to Impact
W. Suaris (1983)
10.5860/choice.30-2693
Fiber-Reinforced Cement Composites
Perumalsamy N. Balaguru (1992)
10.1016/0008-8846(83)90034-0
Flow behavior of fresh cement pastes. A comparison of different rheological instruments and techniques
R. Lapasin (1983)
Fundamentals of High Performance Concrete
E. Nawy (1996)
10.14359/9852
IMPACT RESISTANCE OF STEEL FIBER REINFORCED CONCRETE
N. Banthia (1996)
10.1016/S0377-0257(97)00043-8
Structure and properties of sheared fiber suspensions with mechanical contacts
R. R. Sundararajakumar (1997)
10.14359/11001
Tests to Establish Concrete Pumpability
R. Browne (1977)
10.1007/BF02485970
Validation of BTRHEOM, the new rheometer for soft-to-fluid concrete
C. Hu (1996)
Rhéologie des boues et laves torrentielles : étude de dispersions et suspensions concentrées
P. Coussot (1992)
10.1016/S0008-8846(00)00440-3
The influence of wall slip on yield stress and viscoelastic measurements of cement paste
Aaron W. Saak (2001)
10.14288/1.0050424
Rheology of high performance shotcrete
D. Beaupré (1994)
10.1016/0262-5075(84)90046-0
The rheology of fresh concrete
G. Tattersall (1983)
10.1016/S0008-8846(02)00869-4
The effect of measuring procedure on the apparent rheological properties of self-compacting concrete
M. Geiker (2002)
High performance fiber reinforced cement composites (HPFRCC4)
A. Naaman (2003)
10.1680/MACR.1979.31.109.202
Further development of the two-point test for workability and extension of its range
G. Tattersall (1979)
Dynamics of Polymeric Liquids
R. Bird (1977)



This paper is referenced by
10.1016/J.CEMCONRES.2007.03.014
A method for mix-design of fiber-reinforced self-compacting concrete
L. Ferrara (2007)
10.20381/RUOR-5277
Structural Behaviour of Self Consolidating Steel Fiber Reinforced Concrete Beams
Michael I. Cohen (2012)
10.2495/HPSM120281
Tensile Behaviors Of Highly Flowable StrainHardening Fiber Reinforced Concrete
Wen Cheng Liao (2012)
10.1016/J.COMPOSITESA.2016.08.033
Rheology, fiber distribution and mechanical properties of calcium carbonate (CaCO3) whisker reinforced cement mortar
Mingli Cao (2016)
10.1016/J.ACME.2014.08.008
Determination of steel fibres distribution in self-compacting concrete beams using X-ray computed tomography
T. Ponikiewski (2015)
10.1617/S11527-007-9275-4
Aggregate packing and -void saturation in mortar and concrete proportioning
S. Jacobsen (2008)
10.1016/j.wasman.2016.07.015
Evaluation of concrete recycling system efficiency for ready-mix concrete plants.
Luiz de Brito Prado Vieira (2016)
Structural Build-up of Rigid Fiber Reinforced Cement-based 1 Materials 2 3 A. Perrot
Arnaud Perrot (2013)
10.12989/ACC.2017.5.1.001
Elaboration and characterization of fiber-reinforced self-consolidating repair mortar containing natural perlite powder
A. Benyahia (2017)
10.1007/978-3-319-56797-6_9
Cementitious Composites Reinforced with Natural Fibres
Liberato Ferrara (2017)
10.1016/J.CONBUILDMAT.2017.03.173
Influence of rheological properties of cement mortar on steel fiber distribution in UHPC
R. Wang (2017)
10.1016/J.CONBUILDMAT.2014.11.002
The influence of TiO2 nanoparticles and poliacrilonitrile fibers on the rheological behavior and hardened properties of mortars
L. Senff (2015)
HIGH STRENGTH CONCRETE USING ULTRA-FINE TIO2 AND BASALT FIBER- A STUDY ON MECHANICAL AND DURABILITY CHARACTERISTICS
B. Karthikeyan (2020)
10.31274/ETD-180810-1440
Thixotropic behavior of cement-based materials: effect of clay and cement types
Zhuojun Quanji (2010)
10.36348/sjce.2019.v03i06.001
Investigation on Effects of Sheep Wool fiber on Properties of C-25 Concrete
Dereje Gelana (2019)
10.1016/J.MATDES.2011.03.030
Recent trends in steel fibered high-strength concrete
A. Shah (2011)
10.1007/S00397-009-0393-5
Lubricated compression and X-ray microtomography to analyse the rheology of a fibre-reinforced mortar
F. Chalencon (2010)
10.1016/J.MATDES.2013.08.014
Mechanical behavior of hybrid steel-fiber self-consolidating concrete: Materials and structural aspects
Dimas Alan Strauss Rambo (2014)
10.1016/J.CEMCONRES.2019.105786
Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content
Z. Wu (2019)
10.1016/J.JNNFM.2014.08.009
Toward modeling anisotropic yield stress and consistency induced by fiber in fiber-reinforced viscoplastic fluids
Julien Férec (2015)
10.1016/J.PROSTR.2018.12.368
Methods for characterization of fresh and hardened state of fibre concrete
René Čechmánek (2018)
10.14359/51664074
Flow Characteristics of Macro-Synthetic Fiber-Reinforced Self-Consolidating Concrete
D. Forgeron (2010)
10.1590/S1983-41952016000600008
Avaliação da aplicabilidade de reometria para concretos autoadensáveis com fibra de aço
Rodrigues Filho (2016)
Influence of the addition sequence of PVA-fibers and water on mixing and rheological behavior of mortars 1
fibras de PVA (2016)
10.1016/j.cemconcomp.2019.103498
Fiber-reinforced geopolymer composites: A review
N. Ranjbar (2020)
10.1016/j.conbuildmat.2020.118128
Fracture response of fiber-reinforced sodium carbonate activated slag mortars
Busra Akturk (2020)
CORRELATING FIBER DISPERSION, RHEOLOGY, AND MECHANICAL PERFORMANCE FOR FIBER- REINFORCED CEMENT-BASED MATERIALS
N. Özyurt (2006)
10.1016/J.CONBUILDMAT.2019.02.036
Assessment of parameters governing the steel fiber alignment in fresh cement-based composites
Víctor Pérez Villar (2019)
10.4995/THESIS/10251/34790
Dosage optimization and bolted connections for UHPFRC ties
C. Torregrosa (2014)
Incorporação de nanobastões de carbeto de silício em matrizes cimentícias
Nágilla Huerb de Azevedo (2015)
In-Line Rheological Measurements of Cement Based Grouts Using the UVP-PD Method
M. M. Rahman (2010)
10.1680/MACR.12.00153
Mechanical characteristics of self-compacting concrete with and without fibres
Farhad Aslani (2013)
See more
Semantic Scholar Logo Some data provided by SemanticScholar