Experimental And Finite Element Investigation Of Total Ankle Replacement: A Review Of Literature And Recommendations.
Sinu Mondal, Rajesh Ghosh
Published 2020 · Computer Science, Medicine
Download PDFAnalyze on Scholarcy
This paper briefly reviews the different methodology, technology, challenges, and outcomes of various studies related to TAR prosthesis based on numerical and experimental techniques. Very less in-vitro experimental studies on TAR have been found than finite element (FE) studies. Due to the invasive nature of the experimental approach, inadequacy and less clinical information, computational modelling has been widely used by the researchers. This paper critically examines the part related to FE modelling and experimental analysis. Some recommendation related to modelling of bones, cartilages, ligaments, muscles, and implant-bone interface condition were discussed for better understanding the results and better clinical significance.
This paper references
Three-dimensional finite element stress analysis of the polypropylene, ankle-foot orthosis: static analysis.
Tianqi Chu (1995)
Compressive mechanical properties of human cancellous bone after gamma irradiation.
Michael J. Anderson (1992)
Total ankle replacement. Design evolution and results.
Alexander van den Heuvel (2010)
The prediction of muscular lad sharing and joint forces in the lower extremities during walking.
A. Seireg (1975)
Modeling and stress analyses of a normal foot-ankle and a prosthetic foot-ankle complex.
Mustafa Ozen (2013)
Evaluation of Total Ankle Arthroplasty Using Highly Crosslinked Ultrahigh-Molecular-Weight Polyethylene Subjected to Physiological Loading
Jeffrey E. Bischoff (2019)
Wear characteristics of WSU total ankle replacement devices under shear and torsion loads.
Dinesh Gundapaneni (2015)
A numerical study on stress distribution across the ankle joint: Effects of material distribution of bone, muscle force and ligaments.
Sinu Mondal (2017)
Influence of kinematics on the wear of a total ankle replacement.
Alexandra Smyth (2017)
Ligament fibre recruitment and forces for the anterior drawer test at the human ankle joint.
Federico Corazza (2003)
Development and experimental validation of a finite element model of total ankle replacement.
Alexandre Terrier (2014)
Wear behaviour in total ankle replacement: a comparison between an in vitro simulation and retrieved prostheses.
Saverio Affatato (2009)
Applicability of PEEK and its composites in total ankle replacement devices and wear rate predictions
Daniel Kerschhofer (2016)
The outcome of total ankle replacement: a systematic review and meta-analysis.
Razi Zaidi (2013)
Using an Optimization Approach to Design an Insole for Lowering Plantar Fascia Stress—A Finite Element Study
Yu-Chun Hsu (2008)
10-year survival of total ankle arthroplasties
Anders Henricson (2011)
An analysis of soft tissue loading in the foot--a preliminary report.
S. I. Nakamura (1981)
Biomechanical analysis of the three-dimensional foot structure during gait: a basic tool for clinical applications.
Amit Gefen (2000)
The distal fascicle of the anterior inferior tibiofibular ligament as a cause of tibiotalar impingement syndrome: a current concepts review
Michel P. J. van den Bekerom (2006)
Epidemiology of ankle arthritis: report of a consecutive series of 639 patients from a tertiary orthopaedic center.
Charles L. Saltzman (2005)
Bilateral differences in gait mechanics following total ankle replacement: a two year longitudinal study.
Robin M. Queen (2014)
The effect of insoles in therapeutic footwear--a finite element approach.
David R. Lemmon (1997)
Finite element modeling of a 3D coupled foot-boot model.
Tian-Xia Qiu (2011)
Failure modes for total ankle arthroplasty: a statistical analysis of the Norwegian Arthroplasty Register
Patrick Sadoghi (2014)
Effects of implant orientation and implant material on tibia bone strain, implant–bone micromotion, contact pressure, and wear depth due to total ankle replacement
Subrata Mondal (2019)
Three-dimensional finite element analysis of the foot during standing--a material sensitivity study.
Jason Tak-Man Cheung (2005)
STAR™ Ankle: Long-Term Results
Jeffrey A. Mann (2011)
A STUDY OF THE ELASTIC PROPERTIES OF PLANTAR FASCIA.
David G. Wright (1964)
A brief history of total ankle replacement and a review of the current status.
John A Vickerstaff (2007)
Correlations between orthogonal mechanical properties and density of trabecular bone: use of different densitometric measures.
Joyce H. Keyak (1994)
3D finite element model of the diabetic neuropathic foot: a gait analysis driven approach.
Annamaria Guiotto (2014)
Finite element analysis of stress and wear characterization in total ankle replacements.
Bradley Jay Elliot (2014)
Kinematic Changes After Fusion and Total Replacement of the Ankle Part 3: Talar Movement
Victor Valderrabano (2003)
Revision Total Ankle Replacement
Jennifer Devries (2011)
The in vivo plantar soft tissue mechanical property under the metatarsal head: implications of tissues׳ joint-angle dependent response in foot finite element modeling.
Wen-Ming Chen (2014)
A systematic review of outcome and failure rate of uncemented Scandinavian total ankle replacement
Hongmou Zhao (2011)
A Biomechanical Evaluation of the Tibiofibular and Tibiotalar Ligaments of the Ankle
Annechien Beumer (2003)
The effect of agility ankle prosthesis misalignment on the peri-ankle ligaments.
Charles L. Saltzman (2004)
Development and Validation of a Computational Model to Study the Effect of Foot Constraint on Ankle Injury due to External Rotation
Feng Wei (2010)
Misalignment of total ankle components can induce high joint contact pressures.
Norman Espinosa (2010)
Total ankle replacement. Early experiences with STAR prosthesis.
J. M. Murnaghan (2005)
Effects of bone Young's modulus on finite element analysis in the lateral ankle biomechanics
Wenxin Niu (2013)
Kinematic Changes After Fusion and Total Replacement of the Ankle Part 2: Movement Transfer
Victor Valderrabano (2003)
Robotic Cadaver Testing of a New Total Ankle Prosthesis Model (German Ankle System)
Martinus Richter (2007)
The Effects of Implant Orientations and Implant–Bone Interfacial Conditions on Potential Causes of Failure of Tibial Component Due to Total Ankle Replacement
Subrata Mondal (2019)
Contact stresses, pressure and area in a fixed-bearing total ankle replacement: a finite element analysis
Nicolò Martinelli (2017)
Trabecular bone modulus-density relationships depend on anatomic site.
Elise Feng-i Morgan (2003)
Nonlinear 3D foot FEA modeling from CT scan medical images
Paulo J. Antunes (2011)
Study of Wear Prediction on Total Ankle Replacement
Adhitya Mangala Putra (2013)
Ankle joint biomechanics.
P. Procter (1982)
Effects of internal stress concentrations in plantar soft-tissue--A preliminary three-dimensional finite element analysis.
Wen-Ming Chen (2010)
Human foot modeling towards footwear design
Yuk-Ming Tang (2011)
Biomechanical Topography of Human Articular Cartilage in the First Metatarsophalangeal Joint
Kyriacos A. Athanasiou (1998)
Total ankle replacement design and positioning affect implant-bone micromotion and bone strains
Ran S Sopher (2017)
Finite element modeling of the human foot and footwear
Jtm Cheung (2006)
Kinematic Changes After Fusion and Total Replacement of the Ankle Part 1: Range of Motion
Victor Valderrabano (2003)
Numerical and experimental investigation of the structural behavior of a carbon fiber reinforced ankle-foot orthosis.
Bertram Stier (2015)
Effects of boundary conditions on foot behaviour in the standing position in 3D finite element foot model
Shane Miguel Johnson (2014)
Computational modeling to predict mechanical function of joints: application to the lower leg with simulation of two cadaver studies.
Peter C. Liacouras (2007)
Clinical Applications of Computational Simulation of Foot and Ankle
Jason Tak-Man Cheung (2008)
Finite element analysis of biomechanical effects of total ankle arthroplasty on the foot
Yan Wang (2018)
History of total ankle replacement.
Nikolaos E. Gougoulias (2013)
Total ankle replacement--evolution of the technology and future applications.
John Paul J Yu (2014)
On the development of an osseo-ligamentous finite element model of the human ankle joint
Faris A. Bandak (2001)
Finite element analysis of a total ankle replacement during the stance phase of gait.
Bacchi Reggiani (2006)
Ankle-foot simulator development for testing ankle-foot orthoses.
Hung-Jen Lai (2010)
Physical validation of a patient-specific contact finite element model of the ankle.
Donald D. Anderson (2007)
Effects of plantar fascia stiffness on the biomechanical responses of the ankle-foot complex.
Jason Tak-Man Cheung (2004)
Comparison of hexahedral and tetrahedral elements in finite element analysis of the foot and footwear.
Srinivas C. Tadepalli (2011)