Online citations, reference lists, and bibliographies.
← Back to Search

Improving The Performance Of Lithium-sulfur Batteries By Conductive Polymer Coating.

Yuan Yang, Guihua Yu, J. Cha, Hui Wu, M. Vosgueritchian, Yan Yao, Zhenan Bao, Yi Cui
Published 2011 · Materials Science, Medicine

Save to my Library
Download PDF
Analyze on Scholarcy Visualize in Litmaps
Share
Reduce the time it takes to create your bibliography by a factor of 10 by using the world’s favourite reference manager
Time to take this seriously.
Get Citationsy
Rechargeable lithium–sulfur (Li–S) batteries hold great potential for next-generation high-performance energy storage systems because of their high theoretical specific energy, low materials cost, and environmental safety. One of the major obstacles for its commercialization is the rapid capacity fading due to polysulfide dissolution and uncontrolled redeposition. Various porous carbon structures have been used to improve the performance of Li–S batteries, as polysulfides could be trapped inside the carbon matrix. However, polysulfides still diffuse out for a prolonged time if there is no effective capping layer surrounding the carbon/sulfur particles. Here we explore the application of conducting polymer to minimize the diffusion of polysulfides out of the mesoporous carbon matrix by coating poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) onto mesoporous carbon/sulfur particles. After surface coating, coulomb efficiency of the sulfur electrode was improved from 93% to 97%, and capaci...
This paper references
10.1149/1.2095868
Lithium Sulfur Battery Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions
H. Ya-min (1988)
10.1016/S0169-4332(98)00918-0
Elemental sulfur at the pyrite surfaces: speciation and quantification
V. Toniazzo (1999)
10.1016/S0040-6090(99)00422-8
Characterization of the PEDOT-PSS system by means of X-ray and ultraviolet photoelectron spectroscopy
G. Greczynski (1999)
10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C
Poly(3,4‐ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future
L. Groenendaal (2000)
10.1038/35104644
Issues and challenges facing rechargeable lithium batteries
J.-M. Tarascon (2001)
10.1149/1.1503076
The Lithium/Sulfur Rechargeable Cell Effects of Electrode Composition and Solvent on Cell Performance
J. Shim (2002)
10.1038/NMAT732
Electronically conductive phospho-olivines as lithium storage electrodes
S. Chung (2002)
10.1149/1.1498255
Reducing Carbon in LiFePO4 / C Composite Electrodes to Maximize Specific Energy, Volumetric Energy, and Tap Density
Zhaohui Chen (2002)
10.1016/S0378-7753(03)00300-8
Electrochemical performance of lithium/sulfur batteries with protected Li anodes
Y. M. Lee (2003)
10.1016/S0378-7753(03)00239-8
Olivine-type cathodes: Achievements and problems
A. Yamada (2003)
10.1149/1.1806394
Polysulfide Shuttle Study in the Li/S Battery System
Yuriy V. Mikhaylik (2004)
10.1021/CR020731C
Lithium batteries and cathode materials.
M. Whittingham (2004)
Lithium Batteries and Cathode Materi
M. S. Whittingham (2004)
10.1038/NMAT1368
Nanostructured materials for advanced energy conversion and storage devices
A. Aricò (2005)
10.1016/J.ELECTACTA.2005.06.021
Novel nanosized adsorbing sulfur composite cathode materials for the advanced secondary lithium batteries
Wenbin Zheng (2006)
10.1038/nnano.2007.411
High-performance lithium battery anodes using silicon nanowires.
C. Chan (2008)
10.1002/ADMA.200702242
Developments in Nanostructured Cathode Materials for High‐Performance Lithium‐Ion Batteries
Ying Wang (2008)
10.1016/J.ELECOM.2008.04.004
Rapid microwave-solvothermal synthesis of phospho-olivine nanorods and their coating with a mixed conducting polymer for lithium ion batteries
A. Murugan (2008)
10.1016/J.ELECTACTA.2008.06.053
PEDOT: Cathode active material with high specific capacity in novel electrolyte system
L. Zhan (2008)
10.1038/nature07853
Battery materials for ultrafast charging and discharging
Byoungwoo Kang (2009)
10.1038/nmat2460
A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries.
Xiulei Ji (2009)
10.1073/pnas.0908858106
Highly conductive paper for energy-storage devices
Liangbing Hu (2009)
10.1021/CM902050J
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Chengdu Liang (2009)
XX ' 000–000 ' XXXX www.acsnano.org G Devices
Vol Xxx 'no (2009)
Highly Conductive Paper for Energy-Storage A RTIC LE YANG ET AL
L. B. Hu (2009)
PEDOT: Principles and Applications of an Intrinsically Conductive Polymer
A. Elschner (2010)
10.1021/nl100504q
New nanostructured Li2S/silicon rechargeable battery with high specific energy.
Y. Yang (2010)
Silicon Rechargeable Battery with High Specific Energy. Nano Lett
Y Yang (2010)
10.1038/ncomms1293
Stabilizing lithium-sulphur cathodes using polysulphide reservoirs.
X. Ji (2011)
10.1021/nl200658a
Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability.
H. Wang (2011)
10.1039/C1JM12979A
Optimization of mesoporous carbon structures for lithium–sulfur battery applications
X. Li (2011)
10.1002/AENM.201100152
Semi‐Solid Lithium Rechargeable Flow Battery
Mihai Duduta (2011)
10.1002/anie.201103163
LiMn(1-x)Fe(x)PO4 nanorods grown on graphene sheets for ultrahigh-rate-performance lithium ion batteries.
H. Wang (2011)
Highly Conductive Paper for Energy-Storage A RTIC
L. B. Hu (2011)
10.1016/J.JPOWSOUR.2011.07.021
New insights into the limiting parameters of the Li/S rechargeable cell
C. Barchasz (2012)
10.1002/WENE.48
Nanostructured electrode materials for electrochemical energy storage and conversion
A. Shukla (2013)
AND NOTES
Highly Conductive Paper for Energy-Storage ARTICLE YANG ET AL
L B Hu



This paper is referenced by
10.1021/ACS.ENERGYFUELS.1C00300
Core–Shell Structure S@PPy/CB with High Electroconductibility to Effective Confinement Polysulfide Shuttle Effect for Advanced Lithium–Sulfur Batteries
Dan Zhang (2021)
10.1002/AENM.202003239
Polymers in Lithium‐Ion and Lithium Metal Batteries
Junheng Li (2021)
10.1002/ER.6773
Inhibiting polysulfides with PDA / PEI‐functionalized separators for stable lithium‐sulfur batteries
Cunbao Pei (2021)
10.1016/J.APSUSC.2021.149199
Porous polymer thin film encapsulated sulfur nanoparticles on graphene via partial evaporation for high-performance lithium–sulfur batteries
J. Won (2021)
10.1016/B978-0-12-818484-4.00008-2
Influence of polymers on carbon-based composites in energy storage applications
Manu Patel U.M. (2021)
10.1021/ACS.ENERGYFUELS.0C04264
Crucial Challenges and Recent Optimization Progress of Metal–Sulfur Battery Electrolytes
Pengzhou Mu (2021)
10.34133/2021/2712391
3-D Edge-Oriented Electrocatalytic NiCo2S4 Nanoflakes on Vertical Graphene for Li-S Batteries
Wenyue Li (2021)
10.1016/J.GEE.2021.01.007
Carbonized waste milk powders as cathodes for stable lithium–sulfur batteries with ultra-large capacity and high initial coulombic efficiency
Rabia Khatoon (2021)
10.1007/s11581-021-04103-z
The correlation between structure and thermal properties of nickel-rich ternary cathode materials: a review
Zhongliang Xiao (2021)
10.1002/ADFM.202007285
3D Printed Nanocarbon Frameworks for Li‐Ion Battery Cathodes
Wanli Gao (2021)
10.1002/ER.6730
Study on modification and failure of precast solid electrolyte interface film on Li metal anodes
Fei Chen (2021)
10.1002/AESR.202000096
Carbonaceous and Polymer Materials for Li–S Batteries with an Emphasis on Flexible Devices
Ao Chen (2021)
10.1039/D1NJ00831E
Flexible pore structure modulation enables durable sulfur carrier for advanced lithium–sulfur batteries
Chen Liu (2021)
10.1016/j.ensm.2020.11.021
Rational design of functional binder systems for high-energy lithium-based rechargeable batteries
Yun Zhao (2021)
10.1021/acsomega.0c06240
Density Functional Theory Studies on Sulfur–Polyacrylonitrile as a Cathode Host Material for Lithium–Sulfur Batteries
S. Bertolini (2021)
10.1007/s40843-020-1621-8
In situ protection of a sulfur cathode and a lithium anode via adopting a fluorinated electrolyte for stable lithium-sulfur batteries
Xue Chen (2021)
10.3390/ma14040861
Investigation on Fabrication of Reduced Graphene Oxide-Sulfur Composite Cathodes for Li-S Battery via Hydrothermal and Thermal Reduction Methods
Zhiqi Li (2021)
10.1007/s11581-021-04164-0
Improving the low-rate stability of lithium-sulfur battery through the coating of conductive polymer
Shaozhong Zeng (2021)
10.1016/j.mtcomm.2020.101934
Understanding effects of conductive additives in lithium-sulfur batteries
Xiaoxiao Han (2021)
10.1039/d0ma00797h
Boosting Li–S battery performance using an in-cell electropolymerized conductive polymer
Xiguang Gao (2021)
10.1038/s41467-021-24873-4
Thickness-independent scalable high-performance Li-S batteries with high areal sulfur loading via electron-enriched carbon framework
Nana Wang (2021)
10.1039/d0nr08399b
Melt-diffusion and ion-exchange methods: self-triggered O-rich groups on the surface of acetylene black using S-EDA solution to boost its sulfur content for lithium-sulfur batteries.
Chao Sun (2021)
10.1016/J.JELECHEM.2021.114996
High performance lithium-sulfur batteries based on CoP nanoparticle-embedded nitrogen-doped carbon nanotube hollow polyhedra
Yuqing Zhu (2021)
10.1016/j.surfcoat.2020.126797
High-capacity and cycling-stable polypyrrole-coated MWCNT@polyimide core-shell nanowire anode for aqueous rechargeable sodium-ion battery
Boyoung Cho (2021)
10.1039/D1QI00205H
Catalytic separators with Co–N–C nanoreactors for high-performance lithium–sulfur batteries
L. Ren (2021)
10.1002/9783527826490.CH6
The Application of Polymer Nanocomposites in Energy Storage Devices
Ningyuan Nie (2021)
10.1002/9783527820115.CH10
Conjugated Polymer Nanostructures for Electrochemical Capacitor and Lithium‐Ion Battery Applications
Thanh-Hai Le (2021)
10.1016/j.jallcom.2020.155498
Multiple core-shelled sulfur composite based on spherical double-layered hollow carbon and PEDOT:PSS as cathode for lithium–sulfur batteries
Yilun Ren (2020)
10.1016/j.ensm.2020.01.007
An ultra-durable gel electrolyte stabilizing ion deposition and trapping polysulfides for lithium-sulfur batteries
Chenfeng Ding (2020)
10.1021/acsami.9b21853
Defect-Rich Multi-shelled Fe-doped Co3O4 Hollow Microspheres with Multiple Spatial Confinements to Facilitate Catalytic Conversion of Polysulfides for High-Performance Li-S Batteries.
Wenjuan Wang (2020)
10.1016/j.jallcom.2020.156443
Fe3C composite carbon nanofiber interlayer for efficient trapping and conversion of polysulfides in lithium-sulfur batteries
Keshi Wu (2020)
10.1002/ANIE.201913540
Prospect of Sulfurized Pyrolyzed Poly(acrylonitrile) (S@pPAN) Cathode Materials for Rechargeable Lithium Batteries
H. Yang (2020)
See more
Semantic Scholar Logo Some data provided by SemanticScholar