Online citations, reference lists, and bibliographies.
← Back to Search

Facile Preparation Of Epoxy Based Elastomers With Tunable Tgs And Mechanical Properties

Bin Chen, J. Li, T. Liu, Z. Dai, Haichao Zhao
Published 2018 · Materials Science

Cite This
Download PDF
Analyze on Scholarcy
Share
In this work, a secondary amine-capped polyaspartic ester (PAE-D230) was synthesized using diethyl maleate and amine-terminated polyether (D230) via Michael addition reaction. By modulating the molar ratio of preliminary amine containing D230 and secondary amine-capped PAE-D230 during the curing process with epoxy precursor E44, we obtained epoxy shape memory polymers with tunable Tgs(−12–20 °C), controllable mechanical properties with tensile stress from 0.8 to 14.1 MPa, tensile modulus from 0.7 to 872.0 MPa, and elongation at break from 45.2 to 195.1%. The influence of the composition of curing components on the thermal properties, thermomechanical, mechanical properties, shape memory effect were systematically studied by DSC, TGA, DMA, tensile-stress measurements.
This paper references
10.1016/J.POLYMER.2009.02.035
Facile tailoring of thermal transition temperatures of epoxy shape memory polymers
Tao Xie (2009)
10.1002/APP.32784
Superiority of nanosized over microsized hyperbranched polymer second phase in modifying brittle epoxy resin
Jiaoping Yang (2011)
10.1177/073168401772678788
Chemical Resistance and Tensile Properties of Epoxy/Polycarbonate Blend Coated Bamboo Fibres
A. Rajulu (2001)
ホフマイスター型陰イオン存在下のポリ(塩化ビニルベンジルトリメチルアンモニウム)(PVBTMAC)ブラシの構造遷移
Bibi Iram (2012)
10.1039/C7RA10092B
Carbon nanotube/polyurethane films with high transparency, low sheet resistance and strong adhesion for antistatic application
Ying Tian (2017)
10.1039/JM9960600305
Effect of complexation with copper (II) on cured neat resin properties of a commercial epoxy resin using modified imidazole curing agents
I. Hamerton (1996)
10.1021/IE301813A
Novel Polyurea Microcapsules Using Dendritic Functional Monomer: Synthesis, Characterization, and Its Use in Self-healing and Anticorrosive Polyurethane Coatings
Pyus D. Tatiya (2013)
10.1039/C5PY00172B
High strain epoxy shape memory polymer
N. Zheng (2015)
10.1002/APP.29317
A new strategy for controlling shrinkage of DGEBA resins cured by cationic copolymerization with hydroxyl‐terminated hyperbranched polymers and ytterbium triflate as an initiator
X. Fernández-Francos (2009)
10.1002/APP.1872
Master curves and lifetime prediction for the epoxy system badge n = 0/m-XDA by thermogravimetric analysis
F. Fraga (2001)
10.1007/s10965-012-9894-5
Characterization of shape memory behaviour of CTBN-epoxy resin system
Kavitha (2012)
10.1016/J.EURPOLYMJ.2015.10.032
Amine hardeners and epoxy cross-linker from aromatic renewable resources
M. Fache (2015)
10.1002/1097-4628(20010502)80:5<776::AID-APP1154>3.0.CO;2-8
Activation energies for the epoxy system BADGE n=0/m-XDA obtained using data from thermogravimetric analysis
F. Fraga (2001)
10.1016/J.POLYMER.2015.12.007
Fast switchable, epoxy based shape-memory polymers with high strength and toughness
A. Arnebold (2016)
10.1016/0141-3910(92)90017-Y
The role of β-hydrogen in the degradation of polyesters
P. Sivasamy (1992)
10.1016/J.COMPSCITECH.2015.04.016
Pressure and temperature induced electrical resistance change in nano-carbon/epoxy composites
J. T. Shen (2015)
10.1039/C7RA08886H
High mechanical properties of epoxy networks with dangling chains and tunable microphase separation structure
Yizhou Huang (2017)
10.1016/J.EURPOLYMJ.2010.12.009
Shape memory epoxies based on networks with chemical and physical crosslinks
A. Leonardi (2011)
10.1007/s10965-014-0376-9
Thermal, mechanical and shape memory properties of an intrinsically toughened epoxy/anhydride system
Mengjin Fan (2014)
10.1039/C6RA24818G
Study on the synthesis of bio-based epoxy curing agent derived from myrcene and castor oil and the properties of the cured products
Xuejuan Yang (2017)
10.1016/J.TCA.2012.12.007
Curing behaviors and properties of an extrinsic toughened epoxy/anhydride system and an intrinsic toughened epoxy/anhydride system
Mengjin Fan (2013)
10.1023/A:1010115618176
Degradation Kinetics of an Epoxy/Cycloaliphatic Amine Resin Under Isothermal and Non-isothermal Conditions
L. Barral (1999)
10.4028/www.scientific.net/AMR.179-180.325
Study on Shape Recovery Behaviors of Epoxy-Based Shape Memory Polymer
B. Zhou (2011)
10.1039/C3RA47927G
Study of green epoxy resins derived from renewable cinnamic acid and dipentene: synthesis, curing and properties
J. Xin (2014)
10.1016/J.POLYMDEGRADSTAB.2007.01.037
A study of the degradation of ester-modified epoxy resins obtained by cationic copolymerization of DGEBA with γ-lactones initiated by rare earth triflates
M. Arasa (2007)
10.1002/APP.26644
Effect of Structure of Aromatic Imide-Amines on Curing Behavior and Thermal Stability of Diglycidyl Ether of Bisphenol-A
P. Sharma (2008)
10.1177/1045389X13504474
Effect of the γ-radiation on the properties of epoxy-based shape memory polymers
J. Leng (2014)
10.1016/J.POLYMERTESTING.2015.09.005
Shape recovery studies for coupled deformations in an epoxy based amorphous shape memory polymers
R. Sujithra (2015)
10.1177/1045389X09348255
Durability Assessment of Styrene- and Epoxy-based Shape-memory Polymer Resins
G. Tandon (2009)
10.1007/s10965-014-0506-4
Isothermal crystallization behavior of β-nucleated isotactic polypropylene with different melt structures
J. Kang (2014)
10.1002/APP.10091
Lifetime predictions for the epoxy system BADGE n=0/m‐XDA using kinetic analysis of thermogravimetry curves
F. Fraga (2002)
10.1016/S0014-3057(99)00166-4
Decomposition behavior of epoxy-resin systems cured by diamines
L. Barral (2000)
10.1039/C6PY00099A
Sequential curing of off-stoichiometric thiol–epoxy thermosets with a custom-tailored structure
X. Fernández-Francos (2016)



This paper is referenced by
Semantic Scholar Logo Some data provided by SemanticScholar