Online citations, reference lists, and bibliographies.
← Back to Search

Bending Deformation And Fracture Characterisation In Quenching And Partitioning Steel

Y. Yang, Zhenli Mi, Mei Xu, H. Jiang, Q. Xiu
Published 2018 · Materials Science

Save to my Library
Download PDF
Analyze on Scholarcy Visualize in Litmaps
Share
Reduce the time it takes to create your bibliography by a factor of 10 by using the world’s favourite reference manager
Time to take this seriously.
Get Citationsy
ABSTRACT The bending deformation recorded and fracture characterisation seen during the process of quenching and partitioning (Q&P) steel are investigated as a function of bending angle. According to experimental results, the mechanically induced martensitic transformation of the retained austenite occurred heterogeneously in the direction of thickness. Results from electron backscattered diffraction and finite element analysis confirmed that the heterogeneous phase transformation was caused by the stress difference in the direction of thickness. The results prove fracture behaviour is dominated by martensite cracking. The results provide a new insight into deformation characterisation of the Q&P steel under bending, which allows the design and optimisation of mechanical properties.
This paper references
10.1007/BF02917537
Development of a high strength stainless steel with improved toughness and ductility
D. Webster (1971)
10.2355/ISIJINTERNATIONAL.43.410
The Nature and Consequences of Coherent Transformations in Steel
J. Morris (2003)
10.1016/S1359-6454(02)00577-3
The morphology and crystallography of lath martensite in Fe-C alloys
S. Morito (2003)
10.1016/S1359-6454(03)00059-4
Carbon partitioning into austenite after martensite transformation
J. Speer (2003)
10.1016/S0020-7683(03)00143-4
Determination of the size of the representative volume element for random composites: statistical and numerical approach
T. Kanit (2003)
10.1016/J.ACTAMAT.2004.07.031
A model for deformation behavior and mechanically induced martensitic transformation of metastable austenitic steel
H. Han (2004)
10.1002/SRIN.200606441
Quench and partitioning steel: a new AHSS concept for automotive anti-intrusion applications
B. D. Cooman (2006)
10.1016/J.ACTAMAT.2006.07.009
The morphology and crystallography of lath martensite in alloy steels
S. Morito (2006)
10.1115/1.2931146
Constitutive Modeling and Finite Element Analysis of the Formability of TRIP Steels
J. Serri (2008)
10.1016/J.SCRIPTAMAT.2008.02.045
Model for the interaction between interface migration and carbon diffusion during annealing of martensite–austenite microstructures in steels
M. Santofimia (2008)
10.1016/J.IJPLAS.2007.09.004
A new model of metal plasticity and fracture with pressure and Lode dependence
Y. Bai (2008)
10.1016/J.SCRIPTAMAT.2009.03.021
Influence of carbon partitioning kinetics on final austenite fraction during quenching and partitioning
A. Clarke (2009)
10.1016/j.ultramic.2011.02.004
Assessment of local deformation using EBSD: quantification of accuracy of measurement and definition of local gradient.
M. Kamaya (2011)
10.1016/J.MSEA.2011.03.033
Characterization of transformed and deformed microstructures in transformation induced plasticity steels using electron backscattering diffraction
E. P. Kwon (2011)
10.1016/J.MSEA.2012.05.042
A new effect of retained austenite on ductility enhancement in high strength bainitic steel
Y. Wang (2012)
10.1016/J.ACTAMAT.2011.12.018
Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel
N. Takayama (2012)
10.1016/J.ACTAMAT.2011.11.018
Quantitative analysis of variant selection in ausformed lath martensite
G. Miyamoto (2012)
10.1016/J.MSEA.2013.08.021
Microstructure development and mechanical properties of quenching and partitioning (Q&P) steel and an incorporation of hot-dipping galvanization during Q&P process
J. Sun (2013)
10.1016/J.ACTAMAT.2013.04.065
In situ observations and crystallographic analysis of martensitic transformation in steel
S. Nambu (2013)
10.1016/J.IJMECSCI.2014.04.023
Investigation of the rupture in tension and bending of DP980 steel sheet
A. Mishra (2014)
10.1179/1743284714Y.0000000628
Critical Assessment 7: Quenching and partitioning
J. Speer (2015)
10.1016/J.MSEA.2015.11.072
Determining individual phase properties in a multi-phase Q&P steel using multi-scale indentation tests
G. Cheng (2016)
10.1016/J.SCRIPTAMAT.2016.06.003
Near-Ac3 austenitized ultra-fine-grained quenching and partitioning (Q&P) steel
Lawrence Cho (2016)
10.1016/J.ACTAMAT.2015.11.051
Transformation kinetics and density models of quenching and partitioning (Q&P) steels
S. Kim (2016)
10.1016/J.ACTAMAT.2016.04.048
Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel
Eun Jung Seo (2016)
10.1007/s11661-016-3821-z
Combined Intercritical Annealing and Q&P Processing of Medium Mn Steel
B. D. Cooman (2016)
10.1016/J.MSEA.2015.12.012
Bending properties of functionally graded 300M steels
R. Roumina (2016)
10.1016/J.SCRIPTAMAT.2017.05.002
Atom probe tomography and numerical study of austenite stabilization in a low carbon low alloy steel processed by two-step intercritical heat treatment
Z. Xie (2017)
10.1016/J.MSEA.2017.08.095
Evolution of microstructure and its influence on tensile properties in thermo-mechanically controlled processed (TMCP) quench and partition (Q&P) steel
R. Parthiban (2017)
10.1016/J.MSEA.2017.01.042
Investigation on micromechanism and stress state effects on cleavage fracture of ferritic-pearlitic steel at −196 °C
Jinshan He (2017)
10.1080/02670836.2017.1291165
Novel method for refinement of retained austenite in micro/nano-structured bainitic steels
F. Hu (2017)
10.1016/J.MSEA.2017.07.095
New insights into the mechanism of cooling rate on the impact toughness of coarse grained heat affected zone from the aspect of variant selection
X. Wang (2017)
10.1016/S1006-706X(17)30163-2
Effects of strain states on stability of retained austenite in medium Mn steels
M. Xu (2017)
10.1016/J.JALLCOM.2017.04.056
In situ monitoring the properties of 20 carbon steel and ductile iron under combined tension and three-point bending loadings
Hou Pengliang (2017)
10.1016/J.JMAPRO.2016.12.022
Investigation of the variable elastic unloading modulus coupled with nonlinear kinematic hardening in springback measuring of advanced high-strength steel in U-shaped process
Asghar Zajkani (2017)
10.1016/J.JALLCOM.2016.08.093
Effects of the austenitizing temperature on the mechanical properties of cold-rolled medium-Mn steel system
Z. Zhao (2017)
10.1080/02670836.2018.1425239
Critical review of automotive hot-stamped sheet steel from an industrial perspective
T. Taylor (2018)
10.1080/02670836.2018.1424383
Challenges in the formability of the next generation of automotive steel sheets
H. Yi (2018)
XiongXC.Challenges in the formability of the next generation of automotive steel sheets.Mater
YiHL (2018)



This paper is referenced by
Semantic Scholar Logo Some data provided by SemanticScholar