Online citations, reference lists, and bibliographies.

Error Compensation Analysis Of The Probe-radius Of The Online Measurement Device For Joint Internal Thread

Qiang Zhou, Qiushuang Zhang, Yanfei Yin
Published 2016 · Computer Science

Cite This
Download PDF
Analyze on Scholarcy
The online measurement device adopts the principle that the shaft section of two dimensional tooth profile of Joint Internal Thread was obtained with the passive contact method. And then the characteristic parameters will be calculated. Due to the Probe-radius, center of sphere cannot contact Internal Thread surface in the actual measurement process, which will lead to measurement error. The measurement error will increase with the increase of Probe-radius. Aiming at this problem, this paper carries out Two-dimensional modeling and analysis the measurement error results from the Probe-radius, and according to the actual measurement conditions, the maximum Proberadius in the measurement error allowable range is given
This paper references
Research on Measurement Technique to Thread of the Large Size
Liang Hai-long (2013)
Rigorous diffraction theory applied to the analysis of the optical force on elliptical nano- and micro-cylinders
C. Rockstuhl (2004)
E. M. S. J. xviii (1824)
Design of DSP-based Open Control System for Industrial Robot
Bo You (2007)
A Study on the Key Technology of the Online Measurement Device for Joint Internal Thread
Qiang Zhou (2014)
Measurement technique for 3d surface profile
Z. Wei (2003)
Calculation for compensating error of stylus radius of cmm probe
W H S Peilin (2003)
Design of Control unit for CNC machine tool using Arduino based embedded system
Dev P. Desai (2015)
Probability Theory and Mathematical Statistics
I. Bronshteĭn (1987)
C. Zezong (2003)
Calculation for compensating error of stylus radius of cmm probe [j
W.H.S. Peilin (2016)
A research of high speed & high accuracy ad acquisition card based on vxibus
C Zezong (2003)
Application of first differential grouping method based on the dynamic linear regression in thread testing
Z. Qiang (2000)
Probability theory and mathematical statistics, China Higher Education Press: Beijing
Z. Sheng (2001)
Rapid evaluation and optimization of machine tools with position-dependent stability
M. Law (2013)
Online Calibration of Glucose Sensors From the Measured Current by a Time-Varying Calibration Function and Bayesian Priors
Martina Vettoretti (2016)
Development of a Three-Dimensional Noncontact Digital Optical Profiler
J. C. Wyant (1986)
A novel calibration of the CAT system for joint internal thread
Q. Zhou (2006)
Probe-Radius Compensation of the Bevel Gears Tooth Surface Using 3D Measured Points
Erzsébet Egyed Faluvégi (2013)
Subband Image Coding
B. Girod (1996)
Calibration of coordinate measuring machines
K. Busch (1985)

This paper is referenced by
Semantic Scholar Logo Some data provided by SemanticScholar